An ultrathin and robust single-ion conducting interfacial layer for dendrite-free lithium metal batteries

The practical application of rechargeable lithium metal batteries(LMBs) encounters significant challenges due to the notorious dendrite growth triggered by uneven Li deposition behaviors. In this work,a mechanically robust and single-ion-conducting interfacial layer, fulfilled by the strategic integration of flexible cellulose acetate(CA) matrix with rigid graphene oxide(GO) and Li F fillers(termed the CGL layer), is rationally devised to serve as a stabilizer for dendrite-free lithium(Li) metal batteries. The GCL film exhibits favorable mechanical properties with high modulus and flexibility that help to relieve interface fluctuations. More crucially, the electron-donating carbonyl groups(C=O) enriched in GCL foster a strengthened correlation with Li^(+), which availably aids the Li^(+)desolvation process and expedites facile Li^(+)mobility, yielding exceptional Li^(+) transference number of 0.87. Such single-ion conductive properties regulate rapid and uniform interfacial transport kinetics, mitigating the growth of Li dendrites and the decomposition of electrolytes. Consequently, stable Li anode with prolonged cycle stabilities and flat deposition morphologies are realized. The Li||LiFePO_(4) full cells with CGL protective layer render an outstanding cycling capability of 500 cycles at 3 C, and an ultrahigh capacity retention of 99.99% for over 220 cycles even under harsh conditions. This work affords valuable insights into the interfacial regulation for achieving high-performance LMBs.

Fabrication of Graphene/Cu Composite by Chemical Vapor Deposition and Effects of Graphene Layers on Resultant Electrical Conductivity

Graphene(Gr)has unique properties including high electrical conductivity;Thus,graphene/copper(Gr/Cu)composites have attracted increasing attention to replace traditional Cu for electrical applications. However,the problem of how to control graphene to form desired Gr/Cu composite is not well solved. This paper aims at exploring the best parameters for preparing graphene with different layers on Cu foil by chemical vapor deposition(CVD)method and studying the effects of different layers graphene on Gr/Cu composite’s electrical conductivity. Graphene grown on single-sided and double-sided copper was prepared for Gr/Cu and Gr/Cu/Gr composites. The resultant electrical conductivity of Gr/Cu composites increased with decreasing graphene layers and increasing graphene volume fraction. The Gr/Cu/Gr composite with monolayer graphene owns volume fraction of less than 0.002%,producing the best electrical conductivity up to59.8 ×10^(6)S/m,equivalent to 104.5% IACS and 105.3% pure Cu foil.

Application of the Adaptive Shrinkage Genetic Algorithm in the Feasible Region to TEM Conductive Thin Layer Inversion

Combining the adaptive shrinkage genetic algorithm in the feasible region with the imaging of apparent vertical conductance differential, we have inverted the TEM conductive thin layer. The result of the inversion demonstrates that by adaptive shrinkage in the feasible region, the calculation speed accelerates and the calculation precision improves. To a certain extent, in this method we surmount the transient electromagnetic sounding equivalence and reduced equivalence scope. Comparison of the inverted result with the forward curve clearly shows that we can image the conductive thin layer.

On the high conductive layer near the Moho and the transitional zone between the crust and mantle in Tianshui region

On the basis of MTS and DSS data in and near Tianshui region,the deep structure contour of the region was expounded.The regional distribution of the high conductive layer near the Moho in the region becomes one of the most obvious characters of the conductivity structure in the crust and mantle,and it is corresponding to the low S wave velocity zone near the Moho and is guessed as the transitional zone between the crust and mantle in the region.In this paper,the behaviour of medium and the thermodynamic circumstance of the conductive low shear velocity layer near the Moho were demonstrated emphatically,and the cause of formation of the layer was roughly explained under specified conditions of geographical environment and deep structure characters in this region.

Enhanced light extraction of GaN-based light-emitting diodes with periodic textured SiO_2 on Al-doped ZnO transparent conductive layer

We report an effective enhancement in light extraction of Ga N-based light-emitting diodes（LEDs） with an Al-doped Zn O（AZO） transparent conductive layer by incorporating a top regular textured SiO2 layer. The 2 inch transparent throughpore anodic aluminum oxide（AAO） membrane was fabricated and used as the etching mask. The periodic pore with a pitch of about 410 nm was successfully transferred to the surface of the SiO2 layer without any etching damages to the AZO layer and the electrodes. The light output power was enhanced by 19% at 20 m A and 56% at 100 m A compared to that of the planar LEDs without a patterned surface. This approach offers a technique to fabricate a low-cost and large-area regular pattern on the LED chip for achieving enhanced light extraction without an obvious increase of the forward voltage.

A layered multifunctional framework based on polyacrylonitrile and MOF derivatives for stable lithium metal anode

Composite Li metal anodes based on three-dimensional(3D) porous frameworks have been considered as an effective material for achieving stable Li metal batteries with high energy density.However,uneven Li deposition behavior still occurs at the top of 3D frameworks owing to the local accumulation of Li ions.To promote uniform Li deposition without top dendrite growth,herein,a layered multifunctional framework based on oxidation-treated polyacrylonitrile(OPAN) and metal-organic framework(MOF) derivatives was proposed for rationally regulating the distribution of Li ions flux,nucleation sites,and electrical conductivity.Profiting from these merits,the OPAN/carbon nano fiber-MOF(CMOF) composite framework demonstrated a reversible Li plating/stripping behavior for 500 cycles with a stable Coulombic efficiency of around 99.0% at the current density of 2 mA/cm~2.Besides,such a Li composite anode exhibited a superior cycle lifespan of over 1300 h under a low polarized voltage of 18 mV in symmetrical cells.When the Li composite anode was paired with LiFePO_(4)(LFP) cathode,the obtained full cell exhibited a stable cycling over 500 cycles.Moreover,the COMSOL Multiphysics simulation was conducted to reveal the effects on homogeneous Li ions distribution derived from the above-mentioned OPAN/CMOF framework and electrical insulation/conduction design.These electrochemical and simulated results shed light on the difficulties of designing stable and safe Li metal anode via optimizing the 3D frameworks.

China Continental Conductive Layers and Its Relationship with Basin Evolution

? This paper plots out two deep distribution maps of the China continental crustal and upper mantle conductive layers, and discusses the origin of two kinds of conductive layers, based on the results of the magnetotelluric(MT) sounding research made by Chinese scientists in the last two decades. The MT prospecting shows that the conductive layers possibly exist in upper mantle and middle-lower crust in the Mesozoic and Cenozoic stretching basins, and they coincide with the uplifting of two kinds of conductive layers. These characteristics help to illustrate the deep dynamic settings that control the basin evolution.

The origin of the crustal conductive layer and the conductivity of supercritical brine（Ⅱ）

This paper is the second one of a series of three papers on fluid evolution of the crust upper mantle and the causes of earthquakes. Based on the first paper, two conductive mechanisms of the crustal conductive layer(CCL), graphite and supercritical saline aqueous fluids, are discussed. As there are difficulties for graphite model, the supercritical fluids are investigated in this paper concerning the phases, the electrically conductive behaviors, the evolution and the sealing mechanisms of the fluids. It is obvious that this model is reasonable to explain the geophysical and geochemical characteristics of the CCL presented in the first paper.

Transforming a Two-Dimensional Layered Insulator into a Semiconductor or a Highly Conductive Metal through Transition Metal Ion Intercalation

Atomically thin two-dimensional(2D) materials are the building bricks for next-generation electronics and optoelectronics, which demand plentiful functional properties in mechanics, transport, magnetism and photoresponse.For electronic devices, not only metals and high-performance semiconductors but also insulators and dielectric materials are highly desirable. Layered structures composed of 2D materials of different properties can be delicately designed as various useful heterojunction or homojunction devices, in which the designs on the same material(namely homojunction) are of special interest because preparation techniques can be greatly simplified and atomically seamless interfaces can be achieved. We demonstrate that the insulating pristine ZnPS_3, a ternary transition-metal phosphorus trichalcogenide, can be transformed into a highly conductive metal and an n-type semiconductor by intercalating Co and Cu atoms, respectively. The field-effect-transistor(FET) devices are prepared via an ultraviolet exposure lithography technique. The Co-ZnPS_3 device exhibits an electrical conductivity of 8 × 10^(4) S/m, which is comparable to the conductivity of graphene. The Cu-ZnPS_3 FET reveals a current ON/OFF ratio of 1-05 and a mobility of 3 × 10^(-2 )cm^(2)·V^(-1)·s^(-1). The realization of an insulator, a typical semiconductor and a metallic state in the same 2D material provides an opportunity to fabricate n-metal homojunctions and other in-plane electronic functional devices.

Spin-Orbit Scattering Effects on Hall Conductivity in a Layered Disordered Electron System

Spin-orbit scattering effects in a layered quasi-2D disordered electron system have been investigated by the diagrammatic techniques in perturbation theory. The expression of Cooperon (propagator in particle-particle channel) is obtained as the function of interlayer coupling. The analytical result for the quantum correction to Hall conductivity has been obtained as functions of elastic, inelastic and spin-orbit scattering times. It is shown that the strong and weak couplings correspond, respectively, to the 3D and 2D situations. The Hall coefficient is shown to vanish. The relevant dimensional crossover behavior from 3D to 2D with decreasing the interlayer coupling has been discussed, and the condition for the crossover has been obtained. The present theory is expected to apply for the electronic transport in tunneling superlattices.

Boundary Layer Flow past a Stretching Cylinder and Heat Transfer with Variable Thermal Conductivity

The boundary layer flow of viscous incompressible fluid over a stretching cylinder has been considered to study flow field and temperature field. Due to non-linearity, a numerical approach called Keller-box technique has been used to compute the values of velocity function f and temperature field at different points of dynamic region. The expressions for skin friction and Nusselt number have also been obtained. The dependence of velocity profile and temperature profile on the dimensionless parameter of practical interest has been analyzed in detail by graphs. The dependence of Skin friction and Nusselt number has been seen through tables.

Synthesis and Characterization of Proton-conducting Polymer Electrolytes Based on Acrylonitrile-Styrene Sulfonic Acid Copolymer/Layered Double Hydroxides Nanocomposltes

Acrylonitrile-sodium styrene sulfonate copolymer/layered double hydroxides nanocomposites were prepared by in situ aqueous precipitation copolymerization of acrylonitrile （AN） and sodium styrene sulfonate （SSS） in the presence of 4-vinylbenzene sulfonate intercalated layered double hydroxides （MgA1-VBS LDHs） and transferred to acrylonitrile-styrene sulfonic acid （AN-SSA） copolymer/LDHs nanocomposites as a proton-conducting polymer electrolyte. MgA1-VBS LDHs were prepared by a coprecipitation method, and the structure and composition of MgAl-VBS LDHs were determined by X-ray diffraction （XRD）, infrared spectroscopy, and elemental analysis. X-ray diffraction result of AN-SSS copolymer/LDHs nanocomposites indicated that the LDHs layers were well dispersed in the AN-SSS copolymer matrix. All the AN-SSS copolymer/LDHs nanocomposites showed significant enhancement of the decomposition temperatures compared with the pristine AN-SSS copolymer, as identified by the thermogravimetric analysis. The methanol crossover was decreased and the proton conductivity was highly enhanced for the AN-SSA copolymer/LDHs nanocomposite electrolyte systems. In the case of the nanocomposite electrolyte containing 2% （by mass） LDHs, the proton conductivity of 2.60×10^- 3 S·m^-1 was achieved for the polymer electrolyte.

Visco-Elastic Boundary Layer Flow past a Stretching Plate and Heat Transfer with Variable Thermal Conductivity

In the present paper, the boundary layer flow of Walters Liquid B Model over a stretching plate has been considered to solve heat flow problem with variable conductivity. First, using similarity transformation, the velocity components of velocity have been obtained. Then, the heat flow problem has been considered in two ways: 1) prescribed surface temperature (PST), and 2) prescribed stretching plate heat flux (PHF) in case of variable conductivity. Due to variable conductivity, temperature profile has its two part- one mean tempera-ture and other temperature profile induced due to variable conductivity. The related results have been dis-cussed with the help of graphs.

THE ORIGIN OF DOUBLE HIGH CONDUCTIVITY LAYERS IN THE CRUST OF SOUTHERN TIBET AND ITS GEODYNAMIC CONSEQUENCE

Geoelectrical investigations in Tibetan Plateau show that there are two high conductivity layers (HCLs) in the crust of southern Tibetan Plateau. The first HCL is at a depth of 15～20km, and the second at 45～60km. In the central region of the Plateau, such as north Qiangtang and Bayan Har, there is only one HCL in crust at the depth about 15～20km.The origin of HCL in upper crust of southern Tibet is mainly caused by free saline aqueous fluids. The seismic investigation by project INDEPTH in southern Tibet demonstrates that the bright spot reflection at about 15km depth is caused by 10% volume of free aqueous fluids (Makovsky and Klemperer, 1999). Seismic and heat flow research indicates the temperature in 15km depth of Tibet is from 400℃ to 650℃. The high concentration of Cl - in water of geothermal spring in southern Tibet means that the aqueous fluid in crust is saline water. The experiment on conductivity of NaCl solution shows that the conductivity is more than 4.5 S·m -1 under 400MPa and 300～650℃ condition (Quist and Marshall, 1968). This p\|T condition corresponds to the pressure and temperature range at 15～20km depth of Tibet.

A Stretchable Ionic Conductive Elastomer for High-Areal-Capacity Lithium-Metal Batteries

Developing high-areal-capacity and dendrite-free lithium(Li)anodes is of significant importance for the practical applications of the Li-metal secondary batteries.Herein,an effective strategy to stabilize the high-arealcapacity Li electrodeposition by modifying the Li metal with a stretchable ionic conductive elastomer(ICE)is demonstrated.The ICE layer prepared via an instant photocuring process shows a promising Li^(+)-ion conductivity at room temperature.When being used in Li-metal batteries,the thin ICE coating(~0.27μm)acts as both a stretchable constraint to minimize the Li loss and a protective layer to facilitate the uniform flux of Li ions.With this ICE-modifying strategy,the reversibility and cyclability of the Li anodes under high-areal-capacity condition in carbonate electrolyte are significantly improved,leading to a stable Li stripping/plating for 500 h at an ultrahigh areal capacity of 20 mAh cm^(-2)in commercial carbonate electrolyte.When coupled with industry-level thick LiFePO;electrodes(20.0 mg cm^(-2)),the cells with ICE-Li anodes show significantly enhanced rate and cycling capability.

Suppressing Effects of Ag Wetting Layer on Surface Conduction of Er Silicide/Si(001) Nanocontacts

Current-voltage electrical characteristics of Er silicide/Si（001） nanocontacts are measured in situ in a scanning tunneling microscopy system. Introduced as a new technique to suppress surface leakage conduction on Si（001）,a silver wetting layer is evaporated onto the substrate surface kept at room temperature with Er Si2 nanoislands already existing. The effects of the silver layer on the current-voltage characteristics of nanocontacts are discussed.Our experimental results reveal that the silver layer at coverage of 0.4–0.7 monolayer can suppress effectively the current contribution from the surface conduction path. After the surface leakage path of nanocontacts is obstructed, the ideality factor and the Schottky barrier height are determined using the thermionic emission theory, about 2 and 0.5 eV, respectively. The approach adopted here could shed light on the intrinsic transport properties of metal-semiconductor nanocontacts.

Thermal Conductance of Cu and Carbon Nanotube Interface Enhanced by a Graphene Layer

Thermal conduetances between Cu and graphene covered carbon nanotubes （gCNTs） are calculated by molecular dynamics simulations. The results show that the thermal conductance is about ten times larger than that of Cu- CNT interface. The enhanced thermal conductance is due to the larger contact area introduced by the graphene layer and the stronger thermal transfer ability of the Cu-gCNT interface. From the linear increasing thermal conductance with the increasing total contact area, an effective contact area of such an interface can be defined.

Synthesis and electrochemical performance of La_(2)CuO_(4)as a promising coating material for high voltage Li-rich layered oxide cathodes

The structural transformations,oxygen releasing and side reactions with electrolytes on the surface are considered as the main causes of the performance degradation of Li-rich layered oxides(LROs)cathodes in Li-ion batteries.Thus,stabilizing the surfaces of LROs is the key to realize their practical application in high energy density Li-ion batteries.Surface coating is regarded as one of the most effective strategies for high voltage cathodes.The ideal coating materials should prevent cathodes from electrolyte corrosion and possess both electronic and Li-ionic conductivities simultaneously.However,commonly reported coating materials are unable to balance these functions well.Herein,a new type of coating material,La_(2)CuO_(4)was introduced to mitigate the surface issues of LROs for the first time,due to its superb electronic conductivity(26-35 mS·cm^(-1))and lithium-ionic diffusion coefficient(10^(-12)-10^(-13)cm^(2)·s^(-1)).After coating with the La_(2)CuO_(4),the capacity retention of Li_(1.2)Ni_(0.54)Co_(0.13)Mn_(0.13)O_(2)cathode was increased to 85.9%(compared to 79.3%of uncoated cathode)after 150 cycles in the voltage range of 2.0-4.8 V.In addition,only negligible degradations on the deliverable capacity and rate capability were observed.

Study on characteristics of a double-conductible channel organic thin-film transistor with an ultra-thin hole-blocking layer

The properties of top-contact organic thin-film transistors （TC-OTFTs） using ultra-thin 2, 9-dimethyl-4, 7- diphenyl-1, 10-phenanthroline （BCP） as a hole-blocking interlayer have been improved significantly and a BCP interlayer was inserted into the middle of the pentacene active layer. This paper obtains a fire-new transport mode of an OTFT device with double-conductible channels. The accumulation and transfer of the hole carriers arc limited by the BCP interlayer in the vertical region of the channel. A huge amount of carriers is located not only at the interface between pentacene and the gate insulator, but also at the two interfaces of pentacene/BCP interlayer and pentacene/gate insulator, respectively. The results suggest that the BCP interlayer may be useful to adjust the hole accumulation and transfer, and can increase the hole mobility and output current of OTFTs. The TC-OTFTs with a BCP interlayer at VDS = --20 V showed excellent hole mobility μFE and threshold voltage VTH of 0.58 cm^2/（V-s） and -4.6 V, respectively.

Development and Challenges of Electrode Ionomers Used in the Catalyst Layer of Proton-Exchange Membrane Fuel Cells:A Review

The electrode ionomer plays a crucial role in the catalyst layer(CL) of a proton-exchange membrane fuel cell(PEMFC) and is closely associated with the proton conduction and gas transport properties,structural stability,and water management capability.In this review,we discuss the CL structural characteristics and highlight the latest advancements in ionomer material research.Additionally,we comprehensively introduce the design concepts and exceptional performances of porous electrode ionomers,elaborate on their structural properties and functions within the fuel cell CL,and investigate their effect on the CL microstructure and performance.Finally,we present a prospective evaluation of the developments in the electrode ionomer for fabricating CL,offering valuable insights for designing and synthesizing more efficient electrode ionomer materials.By addressing these facets,this review contributes to a comprehensive understanding of the role and potential of electrode ionomers for enhancing PEMFC performance.