In this study, a new lumped-mass-stick model （LMSM） is developed based on the modal characteristics of a structure such as eigenvalues and eigenvectors. The simplified model, named the ＂frequency adaptive lumped-ma...In this study, a new lumped-mass-stick model （LMSM） is developed based on the modal characteristics of a structure such as eigenvalues and eigenvectors. The simplified model, named the ＂frequency adaptive lumped-massstick model,＂ hasonly a small number of stick elements and nodes to provide the same natural frequencies of the structure and is applied to a nuclear containment building. To investigate the numerical performance of the LMSM, a time history analysis is carried out on both the LMSM and the finite element model （FEM） for a nuclear containment building. A comparison of the results shows that the dynamic responses of the LMSM in terms of displacement and acceleration are almost identical to those of the FEM. In addition, the results in terms of floor response spectra at certain elevations are also in good agreement.展开更多
Aiming at solving the problem of strong coupling characteristic of the key parameters of high-speed pneumatic pulse width modulation( PWM) on / off valve, a general lumped parameter mathematical model based on the val...Aiming at solving the problem of strong coupling characteristic of the key parameters of high-speed pneumatic pulse width modulation( PWM) on / off valve, a general lumped parameter mathematical model based on the valves time periods was well developed. With this model,the mass flow rate and dynamic pressure characteristics of constant volumes controlled by high-speed pneumatic PWM on /off valves was well described. A variable flow rate coefficient model was proposed to substitute for the constant one used in most of the prior works to investigate PWM on /off valves' dynamical pressure response, and a formula for disclosing the inherent relationship among the PWM command signal,static mass flow rate,and sonic conductance of the valve was newly derived.Finally,an extensive set of analytical experimental comparisons were implemented to verify the validity of the proposed mathematica model. With the proposed model, PWM on /off valves' characteristics,such as mass flow rate,step pressure response of the valve control system,mean pressure and ripple amplitude,not only in the linear range,but also in the nonlinear range can be wel predicted; Good agreement between measured and calculated results was obtained,which proved that the model is helpful for designing a control strategy in a closed loop control system.展开更多
1 INTRODUCTIONHemodialysis with ultrafiltration,also called hemodiafiltration(HDF),is a main methodof treatment for patients with chronic renal failure.The HDF procedure providesadequate removals of both small and mid...1 INTRODUCTIONHemodialysis with ultrafiltration,also called hemodiafiltration(HDF),is a main methodof treatment for patients with chronic renal failure.The HDF procedure providesadequate removals of both small and middle molecular weight toxic substamces fromuremic blood,which is not possible by dialysis or ultrafiltration alone.According toclinical experience[1],the HDF procedure is well accepied by the patients,and thetreatment time is reduced by using it.展开更多
Although a detailed finite element(FE) model provides more precise results, a lumped-mass stick(LMS) model is preferred because of its simplicity and rapid computational time. However, the reliability of LMS models ha...Although a detailed finite element(FE) model provides more precise results, a lumped-mass stick(LMS) model is preferred because of its simplicity and rapid computational time. However, the reliability of LMS models has been questioned especially for structures dominated by higher modes and seismic inputs. Normally, the natural frequencies and dynamic responses of a LMS model based on tributary area mass consideration are different from the results of the FE model. This study proposes a basic updating technique to overcome these discrepancies; the technique employs the identical modal response, D(t), to the detailed FE model. The parameter D(t) is a time variable function in the dynamic response composition and it depends on frequency and damping ratio for each mode, independent of the structure's mode shapes. The identical response D(t) for each mode is obtained from the frequency adaptive LMS model; the adaptive LMS model which can provide identical modal frequencies as the detailed FE model. Theoretical backgrounds and formulations of the updating technique are proposed. To validate the updating technique, two types of structures(a symmetric straight column and an unsymmetric T-shaped structure) are considered. From the seismic response results including base shear and base moment, the updating technique considerably improves the seismic response accuracy of the tributary area-based LMS model.展开更多
The lung is an important organ that takes part in the gas exchange process. In the study of gas transport and exchange in the human respiratory system, the complicated process of advection and diffusion (AD) in airway...The lung is an important organ that takes part in the gas exchange process. In the study of gas transport and exchange in the human respiratory system, the complicated process of advection and diffusion (AD) in airways of human lungs is considered. The basis of a lumped parameter model or a transport equation is modeled during the inspiration process, when oxygen enters into the human lung channel. The quantitative measurements of oxygen are detached and the model equation is solved numerically by explicit finite difference schemes. Numerical simulations were made for natural breathing conditions or normal breathing conditions. The respiratory flow results for the resting conditions are found strongly dependent on the AD effect with some contribution of the unsteadiness effect. The contour of the flow rate region is labeled and AD effects are compared with the variation of small intervals of time for a constant velocity when breathing is interrupted for a negligible moment.展开更多
基金Energy Efficiency & Resources of the Korea Institute of Energy Technology Evaluation and Planning (KETEP), Ministry of Knowledge Economy, Republic of Korea under Grant No. 2010T100101066
文摘In this study, a new lumped-mass-stick model （LMSM） is developed based on the modal characteristics of a structure such as eigenvalues and eigenvectors. The simplified model, named the ＂frequency adaptive lumped-massstick model,＂ hasonly a small number of stick elements and nodes to provide the same natural frequencies of the structure and is applied to a nuclear containment building. To investigate the numerical performance of the LMSM, a time history analysis is carried out on both the LMSM and the finite element model （FEM） for a nuclear containment building. A comparison of the results shows that the dynamic responses of the LMSM in terms of displacement and acceleration are almost identical to those of the FEM. In addition, the results in terms of floor response spectra at certain elevations are also in good agreement.
基金National Natural Science Foundation of China(No.51205362)Zhejiang Provincial National Science Foundation of China(No.LQ12E05017)
文摘Aiming at solving the problem of strong coupling characteristic of the key parameters of high-speed pneumatic pulse width modulation( PWM) on / off valve, a general lumped parameter mathematical model based on the valves time periods was well developed. With this model,the mass flow rate and dynamic pressure characteristics of constant volumes controlled by high-speed pneumatic PWM on /off valves was well described. A variable flow rate coefficient model was proposed to substitute for the constant one used in most of the prior works to investigate PWM on /off valves' dynamical pressure response, and a formula for disclosing the inherent relationship among the PWM command signal,static mass flow rate,and sonic conductance of the valve was newly derived.Finally,an extensive set of analytical experimental comparisons were implemented to verify the validity of the proposed mathematica model. With the proposed model, PWM on /off valves' characteristics,such as mass flow rate,step pressure response of the valve control system,mean pressure and ripple amplitude,not only in the linear range,but also in the nonlinear range can be wel predicted; Good agreement between measured and calculated results was obtained,which proved that the model is helpful for designing a control strategy in a closed loop control system.
基金Supported by the Naural Science Foundation(Youth)of Tianjin
文摘1 INTRODUCTIONHemodialysis with ultrafiltration,also called hemodiafiltration(HDF),is a main methodof treatment for patients with chronic renal failure.The HDF procedure providesadequate removals of both small and middle molecular weight toxic substamces fromuremic blood,which is not possible by dialysis or ultrafiltration alone.According toclinical experience[1],the HDF procedure is well accepied by the patients,and thetreatment time is reduced by using it.
基金Basic Science Research Program through the National Research Foundation of Korea(NRF) funded by the Ministry of Education,Science and Technology under Grant No.20151D1A3A01020017
文摘Although a detailed finite element(FE) model provides more precise results, a lumped-mass stick(LMS) model is preferred because of its simplicity and rapid computational time. However, the reliability of LMS models has been questioned especially for structures dominated by higher modes and seismic inputs. Normally, the natural frequencies and dynamic responses of a LMS model based on tributary area mass consideration are different from the results of the FE model. This study proposes a basic updating technique to overcome these discrepancies; the technique employs the identical modal response, D(t), to the detailed FE model. The parameter D(t) is a time variable function in the dynamic response composition and it depends on frequency and damping ratio for each mode, independent of the structure's mode shapes. The identical response D(t) for each mode is obtained from the frequency adaptive LMS model; the adaptive LMS model which can provide identical modal frequencies as the detailed FE model. Theoretical backgrounds and formulations of the updating technique are proposed. To validate the updating technique, two types of structures(a symmetric straight column and an unsymmetric T-shaped structure) are considered. From the seismic response results including base shear and base moment, the updating technique considerably improves the seismic response accuracy of the tributary area-based LMS model.
文摘The lung is an important organ that takes part in the gas exchange process. In the study of gas transport and exchange in the human respiratory system, the complicated process of advection and diffusion (AD) in airways of human lungs is considered. The basis of a lumped parameter model or a transport equation is modeled during the inspiration process, when oxygen enters into the human lung channel. The quantitative measurements of oxygen are detached and the model equation is solved numerically by explicit finite difference schemes. Numerical simulations were made for natural breathing conditions or normal breathing conditions. The respiratory flow results for the resting conditions are found strongly dependent on the AD effect with some contribution of the unsteadiness effect. The contour of the flow rate region is labeled and AD effects are compared with the variation of small intervals of time for a constant velocity when breathing is interrupted for a negligible moment.
