Technique for calibration of chassis components based on encoding marks and machine vision metrology

A novel technique for calibrating crucial parameters of chassis components is proposed,which utilizes the machine vision metrology to measure 3D coordinates of the center of a component's hole for assembling in the 3D world coordinate system.In the measurement,encoding marks with special patterns will be assembled on the chassis component associated with cross drone and staff gauge located near the chassis.The geometry and coordinates of the cross drone consist of two planes orthogonal to each other and the staff gauge is in 3D space with high precision.A few images are taken by a highresolution camera in different orientations and perspectives.The 3D coordinates of 5 key points on the encoding marks will be calculated by the machine vision technique and those of the center of the holes to be calibrated will be calculated by the deduced algorithm in this paper.Experimental results show that the algorithm and the technique can satisfy the precision requirement when the components are assembled,and the average measurement precision provided by the algorithm is 0.0174 mm.

Fingerprint Liveness Detection Based on Multi-Scale LPQ and PCA

Fingerprint authentication system is used to verify users' identification according to the characteristics of their fingerprints.However,this system has some security and privacy problems.For example,some artificial fingerprints can trick the fingerprint authentication system and access information using real users' identification.Therefore,a fingerprint liveness detection algorithm needs to be designed to prevent illegal users from accessing privacy information.In this paper,a new software-based liveness detection approach using multi-scale local phase quantity(LPQ) and principal component analysis(PCA) is proposed.The feature vectors of a fingerprint are constructed through multi-scale LPQ.PCA technology is also introduced to reduce the dimensionality of the feature vectors and gain more effective features.Finally,a training model is gained using support vector machine classifier,and the liveness of a fingerprint is detected on the basis of the training model.Experimental results demonstrate that our proposed method can detect the liveness of users' fingerprints and achieve high recognition accuracy.This study also confirms that multi-resolution analysis is a useful method for texture feature extraction during fingerprint liveness detection.

Soft measurement for component content based on adaptive model of Pr/Nd color features

For measurement of component content in the extraction and separation process of praseodymium/neodymium(Pr/Nd), a soft measurement method was proposed based on modeling of ion color features, which is suitable for fast estimation of component content in production field. Feature analysis on images of the solution is conducted,which are captured from Pr/Nd extraction/separation field. H/S components in the HSI color space are selected as model inputs, so as to establish the least squares support vector machine(LSSVM) model for Nd(Pr) content,while the model parameters are determined with the GA algorithm. To improve the adaptability of the model,the adaptive iteration algorithm is used to correct parameters of the LSSVM model, on the basis of model correction strategy and new sample data. Using the field data collected from rare earth extraction production, predictive methods for component content and comparisons are given. The results indicate that the proposed method presents good adaptability and high prediction precision, so it is applicable to the fast detection of element content in the rare earth extraction.

Optimizing machining parameters of wire-EDM process to cut Al7075/SiCp composites using an integrated statistical approach

Metal matrix composites （MMCs） as advanced materials, while producing the components with high dimensional accuracy and intricate shapes, are more complex and cost effective for machining than conventional alloys. It is due to the presence of discontinuously distributed hard ceramic with the MMCs and involvement of a large number of machining control variables. However, determination of optimal machining conditions helps the process engineer to make the process efficient and effec- tive. In the present investigation a novel hybrid multi-response optimization approach is proposed to derive the economic machining conditions for MMCs. This hybrid approach integrates the concepts of grey relational analysis （GRA）, principal component analysis （PCA） and Taguchi method （TM） to derive the optimal machining conditions. The machining experiments are planned to machine A17075/SiCp MMCs using wire-electrical discharge machining （WEDM） process. SiC particulate size and its weight percentage are explicitly considered here as the process variables along with the WEDM input variables. The derived optimal process responses are confirmed by the experimental validation tests and the results show satisfactory. The practical possibility of the derived optimal machining conditions is also analyzed and presented using scanning electron microscope （SEM） examinations. According to the growing industrial need of making high performance, low cost components, this investigation provides a simple and sequential approach to enhance the WEDM performance while machining MMCs.