基于24Model-D-ISM的地铁站火灾疏散影响因素研究

为预防地铁站火灾事故,深入了解地铁站火灾人员疏散影响因素间的内在联系与层次结构,基于第6版“2-4”模型(24Model)分析63起地铁站火灾疏散事故,充分考虑各个因素之间的交互作用,提取19个影响地铁站人员疏散的关键因素,建立地铁站火灾人员疏散影响因素指标体系;采用算子客观赋权法(C-OWA)改进决策试验与评价实验法(DEMATEL),确定地铁站火灾人员疏散的重要影响因素;在此基础上,采用解释结构模型(ISM)分析各个因素间的层次结构及相互作用路径,构建地铁站火灾人员疏散影响因素的多级递阶结构模型。研究结果表明:疏散引导、恐慌从众行为、人员拥挤为地铁站火灾人员疏散的关键影响因素;地铁站火灾人员疏散受表层因素、中间层因素、深层因素共同作用的影响,其中,疏散教育与培训、设施维护与检查、疏散预案等因素是根源影响因素,重视根源影响因素的改善有利于从本质上预防和控制事故的发生。

Effect of dry-wet cycles on dynamic properties and microstructures of sandstone:Experiments and modelling

Underground pumped storage power plant(UPSP)is an innovative concept for space recycling of abandoned mines.Its realization requires better understanding of the dynamic performance and durability of reservoir rock.This paper conducted ultrasonic detection,split Hopkinson pressure bar(SHPB)impact,mercury intrusion porosimetry(MIP),and backscatter electron observation(BSE)tests to investigate the dynamical behaviour and microstructure of sandstone with cyclical dry-wet damage.A coupling FEM-DEM model was constructed for reappearing mesoscopic structure damage.The results show that dry-wet cycles decrease the dynamic compressive strength(DCS)with a maximum reduction of 39.40%,the elastic limit strength is reduced from 41.75 to 25.62 MPa.The sieved fragments obtain the highest crack growth rate during the 23rd dry-wet cycle with a predictable life of 25 cycles for each rock particle.The pore fractal features of the macropores and micro-meso pores show great differences between the early and late cycles,which verifies the computational statistics analysis of particle deterioration.The numerical results show that the failure patterns are governed by the strain in pre-peak stage and the shear cracks are dominant.The dry-wet cycles reduce the energy transfer efficiency and lead to the discretization of force chain and crack fields.

A Fractional Micro-Macro Model for Crowds of Pedestrians Based on Fractional Mean Field Games

Modeling a crowd of pedestrians has been considered in this paper from different aspects. Based on fractional microscopic model that may be much more close to reality, a fractional macroscopic model has been proposed using conservation law of mass. Then in order to characterize the competitive and cooperative interactions among pedestrians, fractional mean field games are utilized in the modeling problem when the number of pedestrians goes to infinity and fractional dynamic model composed of fractional backward and fractional forward equations are constructed in macro scale. Fractional micromacro model for crowds of pedestrians are obtained in the end. Simulation results are also included to illustrate the proposed fractional microscopic model and fractional macroscopic model, respectively. © 2014 Chinese Association of Automation.

MODEL B-I FOR MACRO RECTANGULAR ELEMENT AND PROBLEMS OF INFLUENCE SURFACE FOR PLATE STRUCTURES

Model B-I for marco rectangular element is presented for the first time in this paper. To establish the influence surf ace for resultant R of bending plates, a number of generalized distributive loads q are defined. It is shown by numerical examples that Model B-I and the formula for the generalized distributive loads advanced in this paper are featured by high accuracy, low memory space and flexibility in practical application, and that they are especially effective for plate structures subject to moving loads, such as the two-dimensional continuous plates of highway bridges and the flat stabs in piled jetty engineering.

Three-Dimensional Nonlinear Dynamic Model and Macro Control of Real Estate

In this paper, according to economics of real estate and macro-control theory, combine with the characteristics of the real estate market, macro-control of the real estate market is studied. After giving the dynamic model of three-dimensional nonlinear differential equations based on the total number of houses on the real estate business, the government’s averages housing investment funds and the standard price, systematically established the stability conditions of equilibrium point for this model. What’s more, through the use of extreme value analysis model, government funds have been invested in real estate business building devotion principles and the construction base of the real estate businessmen has also been estimated successfully. This provides the corresponding theoretical basis for government macro control policy-making.

A statistical mechanics model of carbon nanotube macro-films

Carbon nanotube macro-films are two-dimensional films with micrometer thickness and centimeter by centimeter in-plane dimension.These carbon nanotube macroscopic assemblies have attracted significant attention from the material and mechanics communities recently because they can be easily handled and tailored to meet specific engineering needs.This paper reports the experimental methods on the preparation and characterization of single-walled carbon nanotube macro-films,and a statistical mechanics model on the deformation behavior of this material.This model provides a capability to optimize the synthesis process by comparing with the experiments.

Macro Model Study for Nonlinear Spring of Tense Torsion Bar in Gap-Closing Type Electrostatic Micromirror

Nonlinear spring characteristics of the tense torsion bar in the gap-closing type electrostatic micromirror are examined. The macro model is introduced for the experimental study. The tension applied in the torsion bar is well controlled using the electromagnetic attraction. This controllability is suited for clearing the nonlinear nature. The tension is confirmed to have the effect to widen the controllable angle range of the mirror suppressing the pull-in. The pull-in angle is observed to increases to about 74% of the mechanical limit angle at the tension of 0,96 N. This is significantly larger than 44% of the case with the linear spring. The larger resonant frequency is maintained. The hardening of the spring can keep the balance with the electrostatic force over the limit of the linear spring. The observed features are explained reasonably with the combination of twisting and bending displacements of the torsion bar.

泥岩卸荷损伤-水次序作用下的劣化规律研究

工程开挖建设导致软岩形成卸荷损伤,其在水-岩作用下的劣化特征与卸荷损伤程度密切相关。以巴东地区红层泥岩为研究对象,设计进行了泥岩卸荷损伤模拟试验,随后对卸荷损伤泥岩试样进行水-岩作用试验,结果显示:卸荷损伤导致泥岩局部矿物颗粒形态破坏、微裂缝发育,在后续水-岩作用下颗粒间胶结程度持续弱化,孔隙、裂缝进一步扩展。宏细观参数随水-岩作用时间的增长,其中质量m呈现先上升后骤然下降再趋于稳定的趋势,纵波波速P呈现先减少后上升的趋势,体积应变εv呈现逐渐增大的趋势,分形维数K呈逐渐增长的趋势;且各参数的增长速率均随卸荷损伤程度D的增大呈幂函数增加,当D≥0.49时,各参数的增长速率急剧增大;确定以质量、纵波波速、体积应变和分形维数作为与水反应系统的变量,并运用非线性动力学理论建立了水-岩作用下的泥岩劣化模型,并验证了模型的合理性。研究结果表明所建模型能表征卸荷损伤泥岩在水-岩作用下的宏细观特征参数变化趋势提供一定理论参考。

Parameter Extraction for 2-π Equivalent Circuit Model of RF CMOS Spiral Inductors

A novel parameter extraction method with rational functions is presented for the 2-πequivalent circuit model of RF CMOS spiral inductors. The final S-parameters simulated by the circuit model closely match experimental data. The extraction strategy is straightforward and can be easily implemented as a CAD tool to model spiral inductors. The resulting circuit models will be very useful for RF circuit designers.

仪式-语类模式下中国外交警告言语行为研究

警告言语行为是外交话语中常见的仪式化语用现象。本研究将外交警告言语行为视作目标明确且结构相对稳定的语类,融合仪式理论和语类结构潜势理论,探究仪式化语境配置影响下中国外交警告言语行为的仪式-语类语言形式、语用策略和结构潜势,进而考察外交发言人语言选择背后的道德秩序。研究发现,在语言形式层面,外交发言人通常采用指示视角类仪式框架指示表达及构式实施警告;在语用策略层面,直接性程度较低的非规约性间接警告出现频率最高;在结构潜势层面,外交警告言语行为的宏观话语模式为(ME)■FA,其中评价、将来行动为必要成分。三个层面的警告实现方式体现出坚持独立自主和坚持和平发展这两个主要道德秩序。本研究验证了仪式理论和语类理论融合框架对外交话语分析的可行性。对外交警告仪式-语类特征的考察有利于加深对政治外交仪式特征的理解,为其他机构性话语研究提供启示。

Image processing algorithm acceleration using reconfigurable macro processor model

The concept and advantage of reconfigurable technology is introduced. A kind of processor architecture of re configurable macro processor (RMP) model based on FPGA array and DSP is put forward and has been implemented. Two image algorithms are developed: template-based automatic target recognition and zone labeling. One is estimating for motion direction in the infrared image background, another is line picking-up algorithm based on image zone labeling and phase grouping technique. It is a kind of 'hardware' function that can be called by the DSP in high-level algorithm. It is also a kind of hardware algorithm of the DSP. The results of experiments show the reconfigurable computing technology based on RMP is an ideal accelerating means to deal with the high-speed image processing tasks. High real time performance is obtained in our two applications on RMP.

Macro modeling and analysis of traffic flow with road width

The macro modeling and the solution of traffic flow with road width were investigated.Firstly,a new macro model with the consideration of road width was proposed.Secondly,the effects of road width on uniform flow and small perturbation were studied.The analytical and numerical results show that widening (shrinking) road can enhance (reduce) the equilibrium speed and flow,and the increments (decrements) will increase with the absolute value of road width gradient.In addition,the numerical results illustrate that the new model can describe the effects of road width on the evolutions of uniform flow and small perturbation.

Multi-scale modeling of hemodynamics in the cardiovascular system

The human cardiovascular system is a closed- loop and complex vascular network with multi-scaled het- erogeneous hemodynamic phenomena. Here, we give a selective review of recent progress in macro-hemodynamic modeling, with a focus on geometrical multi-scale model- ing of the vascular network, micro-hemodynamic modeling of microcirculation, as well as blood cellular, subcellular, endothelial biomechanics, and their interaction with arter- ial vessel mechanics. We describe in detail the methodology of hemodynamic modeling and its potential applications in cardiovascular research and clinical practice. In addition, we present major topics for future study： recent progress of patient-specific hemodynamic modeling in clinical applica- tions, micro-hemodynamic modeling in capillaries and blood cells, and the importance and potential of the multi-scale hemodynarnic modeling.

循环载荷作用下煤岩复合结构宏-细观破坏特征及能量-损伤本构模型

煤炭深部开采过程中,周期性开采扰动行为会使邻近煤层的煤岩复合结构承受循环载荷的作用,因此,研究不同循环载荷作用下煤岩复合试样的力学响应行为及宏-细观失效特征具有重要工程意义。选取3种不同的加(卸)载速率,开展了2种循环加卸载路径下的单轴循环压缩试验(同步测定声发射信号),分析了煤岩复合试样的损伤失效特征;基于能量耗散原理,构建了煤岩复合试样在循环载荷作用下的能量-损伤本构模型,最后结合试验实测数据进行验证。结果表明:加(卸)载速率与复合试样的峰值强度呈正相关,当加(卸)载速率从0.05 mm/min增大到0.15 mm/min时,恒定下限逐步循环加卸载路径(路径I)、变上下限等幅循环加卸载路径(路径II)下,试样的峰值应力分别增加了22.44%和28.89%;高加(卸)载速率下,试样的内部裂纹扩展越快,煤岩复合试样中煤组分的破碎程度加剧,分形维数随之增大,试样的内部裂纹扩展越快;随着加(卸)载速率的增大,煤组分中沿基质破坏增多。循环分级跨度大的路径(路径I)有助于试样内部的应力传递,为试样内部裂纹的发育提供了有利条件,导致对应试样的破坏程度更高。试验曲线和能量-损伤本构理论曲线具有较强的一致性,表明所建的能量-损伤本构模型能够很好地描述煤岩复合试样在循环加卸载过程中的变形行为。

A hybrid Lagrangian-Eulerian numerical model for sea-ice dynamics

A hybrid Lagrangian - Eulerian （HLE） method is developed for sea ice dynamics, which combines the high computational efficiency of finite difference method （FDM） with the high numerical accuracy of smoothed particle hydrodynamics （SPH）. In this HLE model, the sea ice cover is represented by a group of Lagrangian ice particles with their own thicknesses and concentrations. These ice variables are interpolated to the Eularian gird nodes using the Gaussian interpolation function. The FDM is used to determine the ice velocities at Eulerian grid nodes, and the velocities of Lagrangian ice particles are interpolated from these grid velocities with the Gaussian function also. The thicknesses and concentrations of ice particles are determined based on their new locations. With the HLE numerical model, the ice ridging process in a rectangular basin is simulated, and the simulated results are validated with the analytical solution. This method is also applied to the simulation of sea ice dynamics in a vortex wind field. At last, this HLE model is applied to the Bohai Sea, and the simulated concentration, thickness and velocity match the satellite images and the field observed data well.

Analysis of axial strain in one-dimensional loading by different models

Different phenomenological equations based on plasticity, primary creep （as a viscoplastic mechanism）, secondary creep （as another viscoplastic mechanism） and different combinations of these equations are presented and used to describe the material inelastic deformation in uniaxial test. Agreement of the models with experimental results and with the theoretical concepts and physical realities is the criterion of choosing the most appropriate formulation for uniaxial test. A model is thus proposed in which plastic deformation, primary creep and secondary creep contribute to the inelastic deformation. However, it is believed that the hardening parameter is composed of plastic and primary creep parts. Accordingly, the axial plastic strain in a uniaxial test may no longer be considered as the hardening parameter. Therefore, a proportionality concept is proposed to calculate the plastic contribution of deformation.

Analytical models for the penetration of semi-infinite targets by rigid,deformable and erosive long rods

A theoretical study is presented herein on the pen- etration of a semi-infinite target by a spherical-headed long rod for Yp 〉 S, where Yp is the penetrator strength and S is the static target resistance. For Yp 〉 S, depending upon initial impact velocity, there exist three types of penetration, namely, penetration by a rigid long rod, penetration by a deforming non-erosive long rod and penetration by an erosive long rod. If the impact velocity of the penetrator is higher than the hydrodynamic velocity （VH）, it will penetrate the target in an erosive mode; if the impact velocity lies between the hydrodynamic velocity （VH） and the rigid body velocity （VR）, it will penetrate the target in a deformable mode; if the impact velocity is less than the rigid body velocity （VR）, it will penetrate the target in a rigid mode. The critical conditions for the transition among these three penetration modes are proposed. It is demonstrated that the present model predictions correlate well with the experimental observations in terms of depth of penetration （DOP） and the critical transition conditions.

Periodic Packing Mode for Trickle-Bed Reactors: Experiments and Modeling

A periodic packing mode of trickle-bed reactor (TBR) for the gas limited reaction was proposed. Hy-drogenation of 2-ethylanthraquinone over Pd/Al2O3 in a laboratory-scale TBR was taken as a test reaction for determining whether the periodic packing mode is advantageous. The effects of operating conditions and packing type on TBR performance were experimentally examined to demonstrate the cause-effect relationships. A mathe-matic model of TBR considering axial dispersion and fractional wetting was developed to quantitatively illuminate the reason of performance enhancement.

Numerical analysis of the failure process of soil-rock mixtures through computed tomography and PFC3D models

Soil-rock mixture （SRM） is a unique type of geomaterial characterized by a heterogeneous composition and a complicated structure. It is intractable for the continuum-based soil and rock mechanics theories to accurately characterize and predict the SRM＇s mechanical properties. This study reports a novel numerical method incorporating microfocus computed tomography and PFC3D codes to probe the deformation and failure processes of SRM. The three-dimensional （3D） PFC models that represent the SRM＇s complex structures were built. By simulating the entire failure process in PFC3D, the SRM＇s strength, elastic modulus and crack growth were obtained. The influence of rock ratios on the SRM＇s strength, deformation and failure processes, as well as its internal mesoscale mechanism, were analyzed. By comparing simulation results with experimental data, it was verified that the 3D PFC models were in good agreement with SRM＇s real structure and the SRM＇s compression process, deformation and failure patterns; its intrinsic mesomechanism can be effectively analyzed based on such 3D PFC models.

Roll System and Stock's Multi-parameter Coupling Dynamic Modeling Based on the Shape Control of Steel Strip

The existence of rolling deformation area in the rolling mill system is the main characteristic which dis- tinguishes the other machinery. In order to analyze the dynamic property of roll system＇s flexural deformation, it is necessary to consider the transverse periodic movement of stock in the rolling deformation area which is caused by the flexural deformation movement of roll system simul- taneously. Therefore, the displacement field of roll system and flow of metal in the deformation area is described by kinematic analysis in the dynamic system. Through intro- ducing the lateral displacement function of metal in the deformation area, the dynamic variation of per unit width rolling force can be determined at the same time. Then the coupling law caused by the co-effect of rigid movement and flexural deformation of the system structural elements is determined. Furthermore, a multi-parameter coupling dynamic model of the roll system and stock is established by the principle of virtual work. More explicitly, the cou- pled motion modal analysis was made for the roll system. Meanwhile, the analytical solutions for the flexural defor- mation movement＇s mode shape functions of rolls are discussed. In addition, the dynamic characteristic of the lateral flow of metal in the rolling deformation area has been analyzed at the same time. The establishment ofdynamic lateral displacement function of metal in the deformation area makes the foundation for analyzing the coupling law between roll system and rolling deformation area, and provides a theoretical basis for the realization of the dynamic shape control of steel strip.