In this paper, novel Al2O3-based poly-hollow microsphere (PHM) ceramics were prepared using Si3N4 and Al2O3 PHMs as pore-forming agents. The effect of Si3N4 and Al2O3 PHMs with different percentages on properties of A...In this paper, novel Al2O3-based poly-hollow microsphere (PHM) ceramics were prepared using Si3N4 and Al2O3 PHMs as pore-forming agents. The effect of Si3N4 and Al2O3 PHMs with different percentages on properties of Al2O3-based PHM ceramics was investigated. Through adjusting percentage of Al2O3 PHMs, Al2O3-based PHM ceramics with enhanced properties are achieved. X-ray diffraction (XRD) results show that main phases of Al2O3-based PHM ceramics vary from beta-SiAlON (z value increases from 2.9 to 4) to Al2O3 with the increase of percentage of Al2O3 PHMs from 10% to 100%. The different phase compositions result in different properties of Al2O3-based PHM ceramics. With the increase of percentage of Al2O3 PHMs, porosity of Al2O3-based PHM ceramics gradually decreases, while their shrinkage, flexural strength, and fracture toughness firstly decrease and then increase. Using different kinds of ceramic PHMs as pore-forming agents, various novel and high-performance porous ceramics could be prepared via optimizing percentage of ceramic PHMs in the future.展开更多
基金Our research work presented in this paper was supported by China Postdoctoral Science Foundation，Fundamental Research Funds for the Central Universities，Open Project of State Key Laboratory of New Ceramics and Fine Processing of Tsinghua University，Basic Research Project of Shenzhen
文摘In this paper, novel Al2O3-based poly-hollow microsphere (PHM) ceramics were prepared using Si3N4 and Al2O3 PHMs as pore-forming agents. The effect of Si3N4 and Al2O3 PHMs with different percentages on properties of Al2O3-based PHM ceramics was investigated. Through adjusting percentage of Al2O3 PHMs, Al2O3-based PHM ceramics with enhanced properties are achieved. X-ray diffraction (XRD) results show that main phases of Al2O3-based PHM ceramics vary from beta-SiAlON (z value increases from 2.9 to 4) to Al2O3 with the increase of percentage of Al2O3 PHMs from 10% to 100%. The different phase compositions result in different properties of Al2O3-based PHM ceramics. With the increase of percentage of Al2O3 PHMs, porosity of Al2O3-based PHM ceramics gradually decreases, while their shrinkage, flexural strength, and fracture toughness firstly decrease and then increase. Using different kinds of ceramic PHMs as pore-forming agents, various novel and high-performance porous ceramics could be prepared via optimizing percentage of ceramic PHMs in the future.
