Classification of Magmatic Sulphide Deposits in China and Mineralization of Small Intrusions

Many important metal resources, such as Ni （Cu, Co）, PGE, exist in magmatic sulfide deposits, are a hot spot in geological research. We divide the magmatic sulphide deposits in China into four types according to their tectonic setting, intruding mode, ore deposit mode, main metallogenic elements. The four types are as follows： （1） Small-intrusion deposits in paleo-continent; （2） Smallintrusion deposits in continental flood basalt; （3） Small-intrusion deposits in orogenic belt; and （4） The deposits associated with ophiolites. On the basis of the classification, we put forward that the main magmatic metallogenic type in China is small-intrusion metallogeny, and describe its characteristics from small intrusions related concept, three geologic settings, three volcanic-intrusive assemblages and metallogenic key factors. According to the experiences of prospecting at home and abroad, we point out that there is big potential in prospecting small-intrusion deposits, which need further study. At last, we indicate that small-intrusion metallogeny not only widely distributes in mafic-ultramafic intrusions, but also has an important economic value and scientific significance in intermediate-acid intrusions.

Time scales and length scales in magma ?ow pathways and the origin ofmagmatic Ni-Cu-PGE ore deposits

Ore forming processes involve the redistribution of heat, mass and momentum by a wide range of processes operating at different time and length scales. The fastest process at any given length scale tends to be the dominant control. Applying this principle to the array of physical processes that operate within magma flow pathways leads to some key insights into the origins of magmatic Ni-Cu-PGE sulfide ore deposits. A high proportion of mineralised systems, including those in the super-giant Noril'sk-Talnakh camp, are formed in small conduit intrusions where assimilation of country rock has played a major role. Evidence of this process is reflected in the common association of sulfides with varitextured contaminated host rocks containing xenoliths in varying stages of assimilation. Direct incorporation of S-bearing country rock xenoliths is likely to be the dominant mechanism for generating sulfide liquids in this setting. However, the processes of melting or dissolving these xenoliths is relatively slow compared with magma flow rates and, depending on xenolith lithology and the composition of the carrier magma, slow compared with settling and accumulation rates. Chemical equilibration between sulfide droplets and silicate magma is slower still, as is the process of dissolving sulfide liquid into initially undersaturated silicate magmas. Much of the transport and deposition of sulfide in the carrier magmas may occur while sulfide is still incorporated in the xenoliths, accounting for the common association of magmatic sulfide-matrix ore breccias and contaminated "taxitic" host rocks. Effective upgrading of so-formed sulfide liquids would require repetitive recycling by processes such as reentrainment, back flow or gravity flow operating over the lifetime of the magma transport system as a whole. In contrast to mafic-hosted systems, komatiite-hosted ores only rarely show an association with externally-derived xenoliths, an observation which is partially due to the predominant formation of ores in lava flows rather than deep-seated intrusions, but also to the much shorter timescales of key component systems in hotter, less viscous magmas. Nonetheless, multiple cycles of deposition and entrainment are necessary to account for the metal contents of komatiite-hosted sulfides. More generally, the time and length scale approach introduced here may be of value in understanding other igneous processes as well as non-magmatic mineral systems.

Rare Earth Element Geochemistry on Magmatic Rocks and Gold Deposits in Shizishan Ore-Field of Tongling, China

REE geochemical characteristics of the magmatic rocks and gold deposits in Shizishan ore-field of Tongling were studied. Three types of the magmatic rocks have almost the same chondrite-normalized REE patterns, Eu and Ce anomalous values, and ∑REE, ∑LREE/∑HREE regular changes, which indicates that their magmas come from the same source and their digenetic mechanism is fractional crystallization. In three gold deposits, the mineral ores and related altered rocks have similar chondrite-normalized REE patterns and sharp Eu positive anomalous values. The REE contents reduced from the magmatic rocks to skamization or alteration magmatic rocks, skam type ores, sulphide type ores, wall-rocks limestone or marble. The REE geochemical characteristics of the ores and related rocks show that primary fluids originated from magmatic differentiation in lower pressure of shallow crust, ore-forming hydrothermal solutions gained REE and mineralization elements further from leaching the magmatic rocks, then superimposed and reformed the limestones or marbles and deposited ore-forming material.

Geological Characteristics and Metallogenic Setting of Representative Magmatic Cu-Ni Deposits in the Tianshan-Xingmeng Orogenic Belt, Central Asia

A great number of magmatic Cu-Ni deposits(including Kalatongke in Xinjiang and Hongqiling in Jilin) are distributed over a distance of almost 3000 km across the Tianshan-Xingmeng Orogenic Belt, from Tianshan Mountains in Xinjiang in the west, to Jilin in eastern China in the east. These deposits were formed during a range of magmatic episodes from the Devonian to the Triassic. Significant magmatic Cu-Ni-Co-PGE deposits were formed from the Devonian period in the Nalati arc(e.g. Jingbulake Cu-Ni in Xinjiang), Carboniferous period in the Puerjin-Ertai arc(e.g. Kalatongke Cu-Ni-Co-PGE in Xinjiang), Carboniferous period in the Dananhu-Touquan arc(e.g. Huangshandong, Xiangshan and Tulaergen in estern Tianshan, Xinjiang) to Triassic period in the Hulan arc(e.g. Hongqiling Cu-Ni in Jilin). In addition to the overall tectonic, geologic and distribution of magmatic Cu-Ni deposits in the Tianshan-Xingmeng Orogenic Belt, the metallogenic setting, deposit geology and mineralization characteristics of each deposit mentioned above are summarized in this paper. Geochronologic data of Cu-Ni deposits indicate that, from west to east, the metallogenic ages in the Tianshan-Xingmeng Orogenic Belt changed with time, namely, from the Late Caledonian(~440 Ma), through the Late Hercynian(300-265 Ma) to the Late Indosinian(225-200 Ma). Such variation could reflect a gradual scissor type closure of the paleo Asian ocean between the Siberia Craton and the North China Craton from west to east.

Magmatic Sulfide Ni-Cu Deposits in China

Deep seated magmatic liquation injection deposits form a major type of magmatic sulfide deposit in China. The reserves of nickel and copper in this type of deposit may attain several hundred thousand tons (e.g.Hongqi 7 and Karatunggu) to nearly ten million tons (e.g.Jinchuan). Those deposits can be classified as large or superlarge deposits. The ore grade is relatively high, commonly with w (Ni)>1 %. The mineralized intrusions are small in size, generally only 0.0 n km 2 to 0. n km 2, with the largest one not exceeding a few km 2. Before intruding, the primary magmas have undergone liquation and partial crystallization at depth; as a result, the magmas have partitioned into barren magma, ore bearing magma, ore rich magma and ore magma, which then ascended and injected into the present locations once or multiple times, to form ore deposits. The above mentioned mineralizing process is known as deep seated magmatic liquation injection mineralization. The volume of the barren magma is generally much larger than those of the ore bearing magma, ore rich magma and ore magma. In the ascending process, most of the barren magma intruded into different locations or outpoured onto the ground surface, forming intrusions or lava flows. The rest barren magma, ore bearing magma, ore rich magma and ore magma may either multiple times inject into the same place in which rocks and ores are formed or separately inject into different spaces to form rocks and ores. Such deep seated magmatic liquation injection deposits have a much smaller volume, greater ore potential and higher ore grade than those of in situ magmatic liquation deposits. Consequently, this mineralizing process leads to the formation of large deposits in small intrusions.

Dating Magmatic Hornblende and Biotite and Hydrothermal Sericite by Laser Probe Technique:Constraints on Genesis of Wangershan Gold Deposit,Eastern Shandong Province,China

The Wangershan gold deposit and spatially related Shangzhuang granite, eastern Shandong Province, have been precisely dated by 40 Ar/ 39 Ar laser incremental heating technique. Magmatic hornblende and biotite, collected from the Shangzhuang granites, yielded well-defined and reproducible plateau ages at 128.1-127.5 and 124.4-124.1 Ma (2 σ ), measuring the cooling ages of the intrusion at ca. 500 ℃ and 300-350 ℃, respectively. Hydrothermal sericite extracted from auriferous vein gave high-quality plateau ages between (120.6±0.3) Ma and (120.0±0.4) Ma (2 σ ). Given the similarity of the closure temperature for argon diffusion (300-350 ℃) in the sericite mineral to the homogenization temperature of primary fluid inclusions in the quartz from gold ores, and the intergrowth of sericite with native gold, present 40 Ar/ 39 Ar sericite ages can be reliably interpreted in terms of the mineralization age for the Wangershan deposit. 40 Ar/ 39 Ar hornblende and biotite ages permit an estimate for the cooling rate of the Shangzhuang granite at about 50 ℃/Ma. There are abundant intermediate-mafic dikes in most gold camps of eastern Shandong, whose ages of formation have been previously constrained mainly at 121-119 Ma. The temporal association between the Shangzhuang granite, the Wangershan gold deposit, and the widespread dikes confirms that intrusive activity, gold mineralization, and dike emplacement in this region were broadly coeval, reflecting significant continental lithosphere thinning and resulting crustal extension of Early Cretaceous in eastern China.

Magmatic Hydrothermal Origin of the Wenyu Copper Polymetallic Deposit, Southern Lancangjiang Zone, SW China

The Wenyu copper polymetallic deposit, with proven reserves of about 0.23 Mt Cu, 394 t Ag and 0.04 Mt Pb, is located in the central part of the Lancangjiang volcanic rock belt （Fig. l a）, which is one of the most potential copper polymetallic exploration areas in SW China.

Magmatic Evolution and Mineralization Process of the Super-Large Shihuiyao Rb–Nb–Ta Deposit,Southern Great Xing'an Range,China

Rare metal ore reserves are an important strategic resource, and their metallogenic mechanism and mineralization studies have also been received widespread international attention.

Sea-floor exhalative sedimentary and magmatic hydrothermal superimposition on the Bainiuchang polymetallic deposit in Yunnan Province: REE geochemical evidence

In order to study the characteristics of sea-floor exhalative sedimentary and magmatic hydrothermal superimposition on the Bainiuchang polymetallic deposit, the REE compositions of the granites, host-rocks and ores have been systematically analyzed by ICP-MS. As viewed from their REE compositions, the granites show obvious negative Eu anomalies and weak negative Ce anomalies. According to their REE characteristics, the host-rocks were derived partly from sea-floor exhalative sediments. In terms of their REE compositions, the ores can be divided into two groups: one group, of which the samples were collected from the Baiyang segment relatively far away from the Bozhushan granite batholith, possesses positive Eu anomalies or no Eu anomaly and negative Ce anomalies, indicating that ore-forming hydrothermal fluid was relatively reductive and its temperature was higher than 250 ℃. Furthermore, the coinstantaneous presence of positive Eu anomalies and negative Ce anomalies indicate that the convective mixing of a little amount of seawater with hydrothermal fluid had happened while ores were precipitated on ancient sea floor. The other group, of which the samples were mainly collected from the Chuanxindong and Duimenshan segments near the Bozhushan granite batholith, has similar chondrite-monalized REE distribution patterns to those of the magmatic rocks. But as a whole, the REE characteristics of both groups change gradually starting from the Bozhushan granite batholith. Based on the REE characteristics of the granites, host-rocks and ores, it is suggested that the ore-forming metals seem to have come from several different sources.

The Sachakou Deposit in West Kunlun of Xinjiang: A Pb-Zn Polymetallic Deposit Associated with Magmatic Metasomatism of Carbonate Rock

Objective The Sachakou Pb-Zn polymetallic deposit is located in Hetian County, Xinjiang （geographical coordinates of E78° 57＇ 54.30＂-78°59＇ 53.63＂, N34° 39＇ 27.50＂-34° 40＇ 57.21＂）. It belongs to the West Kunlun orogenic belt on the northwest edge of the Qinghai-Tibet Plateau and is connected to the Sanjiang orogenic belt to the south （Spurlin et al., 2005）. In recent years, a series of Pb-Zn mineralized spots and deposits have been discovered in this area one after another, which is called the Huoshaoyun ore concentration area. Among them, the Sachakou Pb-Zn deposit has reserves up to140 Mt, which has reached a large scale. However, the study on the genesis of deposits in this area has only just begun. This work studied the genesis ofthis Pb-Zn deposit in order to provide new ideas for the genesis of regional deposits and regional prospecting.

Magmatic Evolution and Mineralization of Porphyry Copper-Gold Deposits in the Duolong Ore Concentration Area, Tibet

The Bangong Lake-Nujiang River metallogenic belt is located between the Qiangtang Block and Lhasa Block, and the Duolong ore concentration area is located in the western section of the Bangong Lake-Nujiang River metallogenic belt. Till now, several large and super large copper-gold deposits, such as Duobuza, Bolong, Dibaonamugang, Naruo and Rongna deposits have been discovered in this area, mainly porphyry copper-gold ones.

Platinum-group Elements Geochemistry of the Yangliuping Magmatic Ni-Cu-PGE Sulfide Deposit:Implications of Its Genetic Link with the Extrusive Basalts

Primitive mantle normalized Platinum group elements (PGE) concentration patterns for the Zhengziyanwo intrusion and Dashibao Formation basalts are of positive slope, similar to most of the world class magmatic Ni Cu PGE sulfide deposits. Characters of this intrusion and its related ores and Dashibao Formation basalts are their negative Pt anomaly and high concentration of Rh relative to Pt and Pd, facts being interpreted to be the results of crystallization and fractionation of Pt alloys and spinel phase free crystallization history for the magma, respectively. PGE parameters of the Dashibao Formation basalts are consistent with the general trend of those found for the Zhengziyanwo intrusion, and this might infer a genetic link between them.

Potential of Magmatic Ni-Cu Deposits of the Hualong Block,Qilian Mountains

The Jinchuan magmatic Ni-Cu deposit,located in the Longshou Mountain region,is the largest producer of Ni and Cu in China,with mineralization being related to mafic and ultramafic magmatism.Previous studies have shown that the Longshou Mountain was combined with the Qilian Mountains before Neoproterozoic,and was separated from each other due to the opening of late Qilian oceanic basin in the Paleozoic.The relict Precambrian microcontinents of the Longshou Mountain and Qilian Mountain

Mineral Chemical Characteristics of Gabbro-diorite for Shulouqiu Uranium Deposit in Northern Guangdong, China: Constraint on the Magmatic Source

1 Introduction The uranium deposits related with Indosinian and Yanshanian granite have provided the abundant resource of uranium during the past several decades in China.The deposits are mainly distributing in the Guidong granite

岩浆型Cu-Ni-PGE硫化物矿床研究的几个问题探讨

文章简述了岩浆型Cu_Ni_PGE硫化物矿床的主要特点和研究现状,探讨了矿床的成矿机制,认为其成矿的首要条件是岩浆中硫达到饱和而使硅酸盐岩浆与硫化物熔体发生熔离。综述了如何利用同位素方法确定其成矿物质来源,介绍了如何判别硫饱和度的方法。

峨眉山大火成岩省Cu-Ni-PGE成矿作用——几个典型矿床岩石地球化学特征的分析

峨眉山大火成岩省岩浆型Cu-Ni-PGE矿化岩体广泛分布,构成峨眉山地幔柱成矿系统中一个非常重要的成矿系列。本文剖析了峨眉山大火成岩省该类矿床的分布及部分典型矿床的地质地球化学特征和矿化特征,揭示了成矿岩体统一的地幔柱成因,阐述了Cu-Ni-PGE成矿作用与峨眉山地幔柱岩浆活动体系的关系,探讨了由于岩浆演化过程及硫化物熔离富集过程的差异所导致的矿化类型变异。指出Cu-Ni-PGE矿床成矿岩体原始岩浆为地幔柱高程度熔融的高镁玄武岩浆,成矿岩体与峨眉山低钛玄武岩同源,矿化岩体主要产于峨眉山地幔柱活动模型的内带低钛玄武岩分布区;金宝山、朱布、力马河、杨柳坪矿床分别代表峨眉山地幔柱Cu-Ni-PGE成矿作用不同成矿机制的端员类型。

岩浆Cu-Ni-PGE矿床研究现状及发展趋势

从全球视野分析研究了世界岩浆铜镍硫化物矿床的大地构造分布和成岩成矿类型,特别是通过上世纪末新发现的加拿大Voisey′s Bay矿床与俄罗斯Noril′sk等世界级矿床特征的对比研究,突出强调了大火成岩省(LIPs)对大规模岩浆硫化物矿床形成的意义,从更加宏观的角度审视了世界级岩浆硫化物矿床形成的地质背景和岩浆作用条件,为中国金川等岩浆Cu-Ni-PGE硫化物矿床的深入研究提供了参照背景。评述分析了当代岩浆硫化物矿床成矿研究中,幔源岩浆中硫化物液相不混溶(熔离)的演化轨迹,对岩浆萃取地壳中的硫改变硫化物饱和度促成不混溶作用发生的可能性和条件进行了探讨,进一步讨论了岩浆演化过程中,亲铜元素(Ni、Cu、Co、Pt和Pd等)进入硫化物液相成为金属硫化物或先期进入先结晶的橄榄石、辉石矿物成为氧化物的物理化学行为,并通过加拿大Sudbury陨石撞击构造成因矿床复合热液对硫化物矿体形成贡献的讨论,提出了热液作用对岩浆硫化物矿床成矿的可能贡献。分析判断了中国岩浆Cu-Ni-PGE硫化物矿床的成矿特点和金川超大型岩浆Cu-Ni-PGE矿床外围的找矿潜力。

四川杨柳坪Cu-Ni-PGE富矿体的成因及意义

Cu Ni PGE矿床绝大多数赋存在基性 超基性岩岩体内部 ,在成因上主要与岩浆结晶分异 熔离作用有关 ,岩浆期后或者独立的热液对于矿床的形成往往起叠加富集的作用。但在四川杨柳坪矿区 ,除了一般岩浆结晶分异 熔离作用形成的Cu Ni PGE矿体之外 ,新近还发现存在独立的完全由热液形成的Cu Ni PGE矿体 ,矿体赋存在基性 超基性岩体之外的大理岩 片岩中 ,与基性超基性岩没有直接的关系 ,矿石品位很高 ,而且已经成为首要的开采对象。考虑到这样的富矿体在国外文献中鲜有报道 ,本文介绍其地质概况及初步的研究结果。