Indispensability and Vulnerability of Magnesia-carbon Bricks for Steelmaking Process

The manufacturing techniques of magnesia-carbon bricks in China have been documented from raw materials,production(process and facilities)to performance and wear issues in the ladle.Magnesia-carbon bricks made of ordinary fused magnesia is the prevailing material used in the slagline of the ladle,but its service life is substantially lower than the bricks based on large-periclase-crystal fused magnesia.In two types of fused magnesia,the average values of periclase crystal size are in double for their difference.It is suggested that large-periclase-crystal fused magnesia should be used for manufacturing magnesia-carbon bricks for the slagline of the ladle by abandoning ordinary fused magnesia,in order to have a prolonged service life,increase the availability of the ladle and reduce the number of downtimes of the ladle.Free phenol in resin produced in China should be as low as that of resin made in Europe,to improve production environment and reduce smoke emission during the ladle preheating.There are large spaces to promote the productivity of magnesia-carbon bricks in China,with high intensity mixers and hydraulic presses.Expansion controlled magnesia-carbon bricks in the ladle depend on the optimized combination of sintered magnesia,Carbores and antioxidants as the matrix,to minimize the premature wear of vertical cracks and joint opening formed in the ladle lining.

Development of Reproducing Alumina-Magnesia-Carbon Bricks

The reproducing alumina-magnesia-carbon bricks were prepared with the dumped bricks as starting materials. The bulk density, apparent porosity, crushing strength, modolus of rupture and slag resistance of the specimen were analyzed. The results show that the used refractories can be reused and recycled by the right method. The reproducing alumina-magnesia-carbon bricks with better abilities were prepared.

Investigation of Refractory Bricks and Oxide Materials Heated in Hydrogen Reduction Conditions

This study aims to provide the basic knowledge for furnace refractory design by investigating refractory property changes occurred in a hydrogen atmosphere.Since refractory bricks are thermodynamically stable in a hydrogen atmosphere at 1100°C,we tried to find out the minute changes.In this experiment,a refractory brick was prepared by andalusite,mullite chamotte,and clay as raw materials and heated to 1100°C in a 100%hydrogen atmosphere for 72 h.It was found that the strength of the brick was decreased and the color was changed to black by the reduction of impurities.And in addition,this study covered research on the slaking risk of MgO raw materials because the minimum temperature is expected to 400°C in fluidized reduction furnaces unlike shaft furnaces.

Visual Analysis of Domestic and Foreign Building Brick Skin Research Based on Citespace

With the progress of the times and the leap of science and technology,the application of brick materials and the research on the brick skin in modern architectural design have shown a dual-track development trend of returning to tradition and innovation.Based on the core collection database resources of Web of Science and the CiteSpace visual analysis tool,this paper constructed and analyzed the spatio-temporal map of keyword co-occurrence network,cluster structure,mutation phenomenon,time course and regional distribution map of building brick skin research.The study revealed that in recent years,the research on brick materials has spanned the study of single material properties and extensively involved in the broad world of construction,especially in the integration of green energy-saving technology,the innovation of fine construction technology of brick skin,and the frontier exploration of digital technology in brick masonry,which has shown particularly significant research vitality and development potential.

Assessment of Cement-Lime as Stabilizer on Mud Bricks

The aim of this study was to evaluate the compressive strength of clay bricks and their stability to water absorption by inserting stabilizers such as lime and cement of 0%, 4%, 6%, 8%, 10%, 12% to 14%. Spectrometric analysis was used to characterize the various stabilizers and the clay used, and tests of resistance and water absorption were also carried out. The clay was found to be an aluminosilicate (15.55% to 17.17% Al2O3 and 42.12% to 44.15% SiO2). The lime contains 90.84% CaO and the cement has 17.80% SiO2, 3.46% Al2O3, 2.43% Fe2O3 and 58.47% CaO in the combined form of tricalcium silicate, dicalcium silicate, tricalcium aluminate and ferro-tetra calcium aluminate. The results showed that the insertion of locally available stabilizers (lime and cement) improved the strength of the material by almost 80% when the lime was increased from 0% to 14% for 14 days. For compressed cement, a 65% increase in strength was observed under the same conditions. Strength increases with drying time, with a 52% increase in strength at 28 days compared to 14 days. Furthermore, compressed cement bricks have a more compact structure, absorbing very little water (32%). In view of all these results, cement appears to be the best stabilizer, and compression improves compressive strength and reduces water absorption.

Bricks and Clicks模式下供应链协调研究

建立了由一个制造商和一个分销商组成的基于电子市场的二级供应链模型,讨论了分销商采用Bricks and Clicks模式分销产品,并在电子渠道进行季节后销售的情况,分析了供应链的契约协调问题及供应链成员的利润情况.研究发现改进的回购契约可以使Bricks and Clicks分销模式下基于电子市场的二级供应链模型达到协调,使分销商的订货量达到供应链最优,并且使供应链成员的利润达到Pareto改进,达到"双赢".最后,通过算例验证了结论.

Processing Technology and Quality of Low-fluoride Brick tea

In order to promote the quality of brick tea and reduce its fluoride content, the fluoride contents in leaves of 25 tea varieties at the .stage of one bud and five leaves were determined by the method of fluodde-ion selective electrode method. The results showed that the fluodde contents in the 25 varieties were in the range of 181.92-345.06 mg/kg, end the fluoride content in ＇Zhongcha 302＇ was the lowest. Based on traditional production process of brick tea, 3 new low-fluoride brick tea production processes with ＇Zhongcha 302＇ as the raw material at the stage of one bud and five leaves were constructed. The fluoride content, physicochemical in- dex, sensory end main chemical contents in the brick tea samples were determined. The best processing process of Iow-fluodde brick tea was process 3, which included aldng, fixing, rolling, second fixing, second roiling, sun-drying, pile-fermentation, steaming, pile-fermentation, drying and shaping into brick by vapor treating. The re- sults showed that the fluoride content and physicochemical index of the brick tea sample of the third low-fluoride brick tea production process accorded with National Standard GB/T 9833.4-2013. The sensory evaluation of the brick tea sample was better than that of brick tea manufacture by the traditional process. The water extract, tea polyphenols, amino acids, caffeine and water-soluble sugar in the brick tea sample increased by 9.41%, 36.39%, 26.94%, 27.23% and 15.29%, respectively. Low-fluodds bdck tea could be produced by selecting low fluoride tea varieties, controlling the tondemess of fresh leaves, and optimizing the processing technique.

The Effects of Nutrition Lick Brick and Salt Brick as Supplement Feed on the Production Performance of Tan Sheep

In the paper, the effects of nutrition lick brick and salt brick as supple-ment feed on the performance of Tan sheep were studied. 36 fattening Tan sheep with the average weight of about 23 kg were chosen, they were randomly divided into 3 groups according to the weight, and each group had 12 sheep. Control group was fed with normal daily ration, experimental group 1 was fed with normal daily ration＋nutrition lick brick, experimental group 2 was fed with normal daily ration＋salt brick, the experimental period was 60 d. The results showed that 1） compared with CK, daily gain of group 1 improved 17.09%（P〈0.01）, feed conversion ratio reduced 11.69%（P〈0.05）, and average gross profit per sheep improved 51.65 yuan; daily gain of group 2 improved 7.03%（P〈0.05）, feed conversion ratio reduced 4.06%（P〉0.05）, and average gross profit per sheep improved 19.78 yuan; 2） compared with group 2, daily gain of group 1 improved 9.40%（P〈0.05）, feed conversion ratio re-duced 7.96%（P〈0.05）, and average gross profit per sheep improved 31.87 yuan;these indicated that nutrition lick brick and salt brick as supplement feed for Tan sheep both can improve the production performance of Tan sheep, and the supple-mentary feeding effect of nutrition lick brick was better.

A Retrospective Review of Aluminamagnesia-carbon Refractories

The residual expansion of in-situ spinel formation in using of alumina-magnesia-carbon(AMC)bricks monolizes the lining of steel-making ladles with the closure of their joints,which has been an effective solution avoiding washing out of the joints in ladle lining by the reduction of the penetration of liquid slag and molten steel.Alumina-magnesiacarbon refractories are overall reviewed,in terms of major raw materials,thermal evolution,corrosion and oxidation,and thermomechanical behavior,as well as type,addition and fraction of magnesia used.General commercial products contain 5%-10%MgO and 5%-10%C with a certain amount of metallic aluminum powder,which is believed to facilitate spinel formation at early stage of heating-up,although high magnesia containing AMC bricks are studied and used sometimes.With low ratio of Al_(2)O_(3)/C=12.9 and the carbon content of 6.4%C,AMC brick exhibits the highest corrosion resistance.It is important to determine the type,addition and fraction of magnesia used in AMC refractories for demonstrating high corrosion resistance and superior thermomechanical behavior.

Development of a Thermoplastic Magnesia Carbon Brick ——“A Cold Process Flexible System”

Conventional resin bonded MgO-C bricks, which are manufactured via cold mixing process, harden and attain brittleness during carbonization of resin due to the formation of isotropic glassy carbon. They do not exhibit thermo-plasticity, which can facilitate the release of huge amount of stresses generated during preheating or in operation. On the contrary, pitch bonded MgO-C bricks, show better pyro-plasticity due to formation of an anisotropic and graphitized coke structure during carbonization of pitch. Hence, pitch bonded bricks show a superior structural spalling resistance in comparison to resin-bonded bricks. One of the drawbacks of pitch-bonded bricks is that the manufacturing requires a hot mixing process and hot pressing facility. This paper describes how a combination of above two processes was optimized to make a MgO-C brick via cold process. These bricks exhibit a low Modulus of Elasticity and thereby facilitate release of stresses during operation. Normal coal tar pitch is considered as an environmental hazard due to the presence of polyaromatic hydrocarbons like benzopyrene B [ a ] P. So, a special binder with a low B[ a ] P was selected, which is eco-friendly in nature. Such bricks were made in our plant in China and supplied to an integrated steel plant in Europe for their ladle. The bricks supplied have given encouraging life.

Properties,Performance and Quality Control of Recycled MgO-C Bricks

Properties, section structure and service results of recycled MgO-C bricks and new MgO-C bricks for ladle slag line of Baosteel were analyzed and compared, and the measures of improving stability and quality of recycled MgO-C bricks were summarized. The results show that： （1） High quality recycled MgO-C materials can be produced by scientific, meticulous and strict management for every process such as dismantling furnace, selection, removing impurity and slag, stacking and homogenization ; （2） Using high quality recycled materials and reasonable production technique, recycled MgO-C bricks with better properties and service efficiency than those of new MgO-C brick can be produced; （3） Service efficiency of recycled MgO - C bricks is good because of its high density, good oxidation resistance and reasonable structure.

用brick-wall方法计算黑洞熵的再讨论

在薄层模型brick wall方法的基础上 ,进一步研究了黑洞熵的计算 ,发现黑洞熵来源于其视界面上每一个面元的贡献 .熵与视界面积成正比 ,不但适用于整个黑洞 ,也适用于黑洞视界的局部 .这一思想不但可以用于计算表面各点温度不同的动态黑洞的熵 ,而且使得人们对黑洞熵与视界面积关系的认识更加深入了一步 .

The Cultural Implication of Brick Carving Model Calligraphy in Shanxi Chang's Manor

Focusing on the unique style of brick carving model calligraphy in Shanxi Chang's manor,this research analyses the content and feature of the different parts of brick carving,and discuses the presenting cultural deposits.It reflects the deep Confucian culture of Shanxi Chang's manor,with the peculiar charming in culture and aesthetic value.

陕北地区传统民居靠崖式砖窑承载力及稳定性评估

为研究陕北地区传统民居靠崖式砖窑的承载能力及稳定性,通过现场检测和调查靠崖式砖窑的残损情况及坍塌区域对整体结构的影响,采用有限元软件ABAQUS对窑洞单体和窑洞-边坡整体进行了承载力和稳定性分析。研究结果表明:靠崖式砖窑较严重残损主要分布在窑腿、拱顶,病害主要表现为窑腿开裂和外闪,拱券开裂、局部松动乃至坍塌;坍塌区域的地基由于应力释放引起上部窑洞部分区域倾斜、开裂;窑洞单体在外荷载作用下变形及应力较小,受地震作用影响较小;窑洞-边坡模型失稳时的强度折减系数为1.15,表明该边坡目前处于稳定状态,在降水较多时存在失稳的风险。

Investigation of the medium calcium based non-burnt brick made by red mud and fly ash: durability and hydration characteristics

Red mud is a type of highly alkaline waste residue produced in the process of alumina smelting by the Bayer process.Based on the idea of medium calcium content,solid wastes such as red mud and fly ash were used to prepare non-burnt bricks;and the mass ratio of CaO/SiO2 was selected in the range of 0.88–1.42.Mechanical properties and durability were investigated with a compressive strength test.X-ray diffractometry(XRD),scanning electron microscope(SEM),and Fourier transform infrared spectroscopy(FTIR)techniques were used to characterize the hydration characteristic.The environmental performance was analyzed by Inductively Coupled Plasma Mass Spectrometry(ICP).The results indicated that the mechanical properties and the durability were optimal when the mass ratio of CaO/SiO2 was 1.23.The hydration products were mostly C–S–H gel,ettringite,Na4Ca(Si10All6)O32·12H2O and Ca3Al2(SiO4)(OH)8.They were responsible for the strength development,and the CaO/SiO2 mass ratio of 1.23 had the best polymerized structure.The results of an environmental performance test showed that the heavy metals in the raw materials were well-solidified in the brick.Therefore,this paper provides an effective solution for use of solid wastes in building material.

用brick-wall方法计算MRN黑洞内视界的熵

利用薄层模型brick-wall方法计算了MRN黑洞内视界的熵,得出了黑洞熵与视界面积成正比的结果。

Study on Properties of Magnesia-Hercynite Brick

Using magnesia and hercynite as materials, we researched the magnesia hercynite brick in order to solve the problem of chrome free brick used in the burning zone of cement rotary kiln. Effect of different firing temperature and different content of hercynite on properties of the brick were studied. The results show that the magnesia hercynite specimen fired at 1600℃ was densified and when the hercynite content is 7%, the cold crushing strength and the adhesive strength of rupture of the specimen have the highest value.

面向学术出版的数据增强解决方案--基于67Bricks的案例研究

在技术和科研用户需求变化的驱动下,软件开发咨询公司67Bricks着眼于海量数据及数据技术给学术出版业带来的巨大变化和机遇,帮助出版商从传统的内容提供商转型为数据驱动的内容服务商。在技术理念上,以数据技术和人工智能为核心设计模块化平台,使出版商可以更高效、更可靠地创建和管理内容;在业务模式上,通过协作方式,深度参与学术出版商变革的全流程活动;在市场定位上,以与学术出版商建立长期合作伙伴关系为中心,而不是将自身定位为仅提供技术资源的软件供应商。本文对67Bricks助力学术出版商的相关实践进行总结和评价,以供我国学术出版企业在制定数据驱动发展战略时进行比较和借鉴。

Enhanced strength in novel nanocomposites prepared by reinforcing graphene in red soil and fly ash bricks

Low-dimensional nanomaterials such as graphene can be used as a reinforcing agent in building materials to enhance the strength and durability. Common building materials burnt red soil bricks and fly ash bricks were reinforced with various amounts of graphene, and the effect of graphene on the strength of these newly developed nanocomposites was studied. The fly ash brick nanocomposite samples were cured as per their standard curing time, and the burnt red soil brick nanocomposite samples were merely dried in the sun instead of being subjected to the traditional heat treatment for days to achieve sufficient strength. The water absorption ability of the fly ash bricks was also discussed. The compressive strength of all of the graphene-reinforced nanocomposite samples was tested, along with that of some standard (without graphene) composite samples with the same dimensions, to evaluate the effects of the addition of various amounts of graphene on the compressive strength of the bricks.

Comparative study on Leaf Tissue Morphologic Changes of Chang-Sheng-Chuan Green Brick Tea Before ad After Fermentation

[Objective] The aim was to understand the change of fermentation pro- cess of Chang-sheng-chuan green brick tea and analyze the changes in the con- tents of structure components of tea leaves before and after fermentation. [Method] Ten tea leaves before and after fermentation were chosen. The tea leaves sections were made using paraffin microtomy, PAS staining, and observed under light mi- croscopy. Through image analysis for the tea leaves, we compared the changes on the areas of the cellulose and colloid in cell before and after pile-fermentation. At the same time, the tea leaves were observed under transmission electron micro- scope. [Result] The results showed that the pile-fermentation process caused the tea leaves tissue to become loose, and expanded the cell space. Besides, the cell wall of tea leaves was obviously thinning, and even breaking which composed of cellulose. Image analysis showed that the leaf fiber composition reduced significant- ly, with a corresponding increase of yellow colloid in cell. Under observation of transmission electron microscope, there were large amounts of fungi located in the space between the colloid and the cell wall of the tea leaves after pile-fermentation. [Conclusion] The fermentation of Green brick tea is the process of microbial bio- transformation of tea, which is dominated by microbe and consumed the cellulose components of tea leaves.