Effective Elimination of Hazardous Chromium (VI) Using Periodic Elements and Contemporary Adsorption Methods by Using Magnesium Ferrite Nanoparticle: A Review

A well-known hazardous metal and top contaminant in wastewater is hexavalent chromium. The two forms of most commonly found chromium are chromate ( CrO 4 2− ) and dichromate ( Cr 2 O 7 2− ). Leather tanning, cooling tower blow-down, plating, electroplating, rinse water sources, anodizing baths etc. are the main sources of Cr (VI) contamination. The Cr (VI) is not only non-biodegradable in the environment but also carcinogenic to living population. It is still difficult to treat Cr contaminated waste water effectively, safely, eco-friendly, and economically. As a result, many techniques have been used to treat Cr (VI)-polluted wastewater, including adsorption, chemical precipitation, coagulation, ion-exchange, and filtration. Among these practices, the most practical method is adsorption for the removal of Cr (VI) from aqueous solutions, which has gained widespread acceptance due to the ease of use and affordability of the equipment and adsorbent. It has been revealed that Fe-based adsorbents’ oxides and hydroxides have high adsorptive potential to lower Cr (VI) content below the advised threshold. Fe-based adsorbents were also discovered to be relatively cheap and toxic-free in Cr (VI) treatment. Fe-based adsorbents are commonly utilized in industry. It has been discovered that nanoparticles of Fe-, Ti-, and Cu-based adsorbents have a better capacity to remove Cr (VI). Cr (VI) was effectively removed from contaminated water using mixed element-based adsorbents (Fe-Mn, Fe-Ti, Fe-Cu, Fe-Zr, Fe-Cu-Y, Fe-Mg, etc.). Initial findings suggest that Cr (VI) removal from wastewater may be accomplished by using magnesium ferrite nanomaterials as an efficient adsorbent.

Green synthesis of three-dimensional magnesium ferrite/titanium dioxide/reduced graphene from Garcinia mangostana extract for crystal violet photodegradation and antibacterial activity

In this study,three-dimensional porous magnesium ferrite/titanium dioxide/reduced graphene oxide(Mg Fe_2O_(4)-GM/TiO_(2)/rGO(MGTG))was successfully synthesized via green and hydrothermal-supported co-precipitation methods using the extract of Garcinia mangostana(G.mangostana)as a reducing agent.The characterization results indicate the successful formation of the nano/micro Mg Fe_(2)O_(4)(MFO)and TiO_(2) on the structure of the reduced graphene oxide(rGO),which can also act as efficient support,alleviating the agglomeration of the nano/micro MFO and TiO_(2).The synergic effects of the adsorption and photodegradation activity of the material were investigated according to the removal of crystal violet(CV)under ultraviolet light.The effects of catalyst dosage,CV concentration,and p H on the CV removal efficiency of the MGTG were also investigated.According to the results,the CV photodegradation of the MGTG-200 corresponded to the pseudo-first-order kinetic model.The reusability of the material after 10 cycles also showed a removal efficiency of 92%.This happened because the materials can easily be recollected using external magnets.In addition,according to the effects of different free radicals·O_(2)^(-),h^(+),and·OH on the photodegradation process,the photocatalysis mechanism of the MGTG was also thoroughly suggested.The antibacterial efficiency of the MGTG was also evaluated according to the inhibition of the Gram-positive bacteria strain Staphylococcus aureus(S.aureus).Concurrently,the antibacterial mechanism of the fabricated material was also proposed.These results confirm that the prepared material can be potentially employed in a wide range of applications,including wastewater treatment and antibacterial activity.

Electrochemical determination of Gibbs free energy of formation of magnesium ferrite

The standard Gibbs free energy of formation of magnesium ferrite was determined by means of two types of solid state electrochemical cells： one using MgZr4（PO4）6 （MZP） as the solid electrolyte and the other using CaF2 as the solid electrolyte. The first cell was operated in the range of 950 to 1100 K. The second cell was operated in the range of 1125 to 1200 K. The reversibility of the cell EMFs was confirmed by microcoulometric titration. The Gibbs energy changes of magnesium ferrite relative to component oxides were calculated based on EMF measurements and are given by following expressions, respectively： AG1 = -3579-15 T （J/mol） and AGⅡ =6258-24.3 T （J/mol）. The results obtained from two different cells are consistent with each other. The results also are in agreement with Rao＇ s and Tretjakov＇s data in the measured temperature range. When the Gibbs free energies of formation of MgO and Fe203 were substituted in the reaction, the Gibbs free energies of formation of MgFe204 was obtained in two temperature ranges and the for mations are shown as follows： AG 1Formation =-1427394＋360.5 T （J/mol） and AGⅡ Formition =-1417557＋351.2 T （J/mol）.

Photocatalytic application of magnesium spinel ferrite in wastewater remediation:A review

This review paper explores the efficacy of magnesium ferrite-based catalysts in photocatalytic degradation of organic contaminates(antibiotic and dyes).We report the influence of different doping strategies,synthesis methods,and composite materials on the degradation efficiency of these pollutants.Our analysis reveals the versatile and promising nature of magnesium ferrite-based catalysts,offering the valuable insights into their practical application for restoring the environment.Due to the smaller band gap and magnetic nature of magnesium ferrite,it holds the benefit of utilising the broader spectrum of light while also being recoverable.The in-depth analysis of magnesium ferrites'photocatalytic mechanism could lead to the development of cheap and reliable photocatalyst for the wastewater treatment.This concise review offers a thorough summary of the key advancements in this field,highlighting the pivotal role of the magnesium ferrite based photocatalysts in addressing the pressing global issue of organic pollutants in wastewater.

Synthesis of nitrogen-doped reduced graphene oxide/magnesium ferrite/polyaniline composite aerogel as a lightweight,broadband and efficient microwave absorber

The fabrication of graphene-based microwave absorbing materials with low density,small filling ratio,broad bandwidth and strong absorption remains a huge challenge.In this work,nitrogen-doped reduced graphene oxide/magnesium ferrite/polyaniline(NRGO/MgFe_(2)O_(4)/PANI)composite aerogel was synthesized by a three-step method of solvothermal reaction,in situ chemical oxidation polymerization and hydrothermal self-assembly.The results showed that the obtained aerogels had a unique three-dimensional(3D)porous network structure and low bulk density(11.1-13.0 mg cm^(−3)).It was worth noting that in the NRGO/MgFe_(2)O_(4)/PANI ternary composite aerogel,MgFe_(2)O_(4)coated with a thin PANI layer was anchored on the surface of NRGO sheets.Furthermore,the NRGO/MgFe_(2)O_(4)/PANI ternary composite aerogel showed much better microwave absorbing capacity compared with pure NRGO aerogel and NRGO/MgFe_(2)O_(4)binary composite aerogel.When the filling ratio was as low as 11.5 wt.%,the obtained ternary composite aerogel exhibited the maximum effective absorption bandwidth of 7.0 GHz at a matching thickness of 2.1 mm,and the minimum reflection loss of-42.9 dB at a thickness of 3.57 mm.Additionally,the prob-able microwave dissipation mechanism was also elucidated.It was believed that this study would pave the way for the construction of 3D graphene-based composites as lightweight,broadband and efficient microwave absorbents.

Preparation and Characterization of Nanocomposite MgFe_2O_4/SiO_2

Nanocomposites MgFe2O4/SiO2 were successfully synthesized by the sol-gel method in the presence of N, N-dimethylformamide （DMF）. The formation of pure MgFe2O4 was confirmed by powder X-ray diffraction （XRD） and electron diffraction. The structural evolution of MgFe2O4 nanocrystals was followed by powder X-ray diffraction and IR absorption spectroscopy. The formation of spinel structure of MgFe2O4 started at 800 ℃, and completed at 900 ℃, The transmission electron microscopy （TEM） measurements suggest that the particle sizes increase with the increasing annealing temperature, and the mean particle sizes of the spherical samples annealed at 800 ℃, 900 ℃ and 1 050 ℃ are ca. 3 nm, 8 nm and 11 nm, respectively. Magnetization measurements at room temperature and 78 K indicate supemaramagnetic nature of these MgFe2O4 nanocrvstals.

Effect of Mg Addition on Nucleation of Intra-granular Acicular Ferrite in Al-killed Low Carbon Steel

To verify the formation behaviors and mechanisms of intra-granular acicular ferrite（ IAF） grains nucleated by Mg-Al-O in low carbon steel,the steels containing different Mg contents were refined in a vacuum induction furnace. The effect of Mg addition on the formation of IAF structure in Al-killed low carbon steel was investigated by optical microscope（ OM） and scanning electron microscope with energy dispersive X-ray spectroscope（ SEM-EDX）. It reveals that the IAFs are only detected in Mg-added steels,and the volume fraction of IAF increases with the Mg concentration from 8 × 10^（-6） to 26 × 10^（-6）. It shows that not only the MgO-Al_2O_3-MnS and MgO-Al_2O_3-P_2O_5 particles are the effective nucleation sites for IAF,but also the pure MgO·Al_2O_3 phase can promote the ferrite nucleation. A Mn-depletion zone（ MDZ） is characterized adjacent to the MgO-Al_2O_3-MnS,which is believed to be one of the possible mechanisms to explain the IAF nucleation. The MDZ around the MgO-Al_2O_3-MnS inclusion would be induced by the Mn S precipitation on the inclusion. It seems that the ability of Mg-containing inclusions to induce the nucleation of ferrite might be attributed to a new mechanism,i. e.,the Prich zone formed on a few Mg-Al-O inclusions might be another factor for promoting the IAF formation.

Fabrication of novel bifunctional nanohybrid based on layered rare-earth hydroxide with magnetic and fluorescent properties

We demonstrate the fabrication of a novel magnetic nanohybrid involving the drug molecule 5 aminolevulinic acid(5-ALA)intercalated Gd-Eu layered rare-earth hydroxide(LRH)coated on magnesium ferrite particles(MgFe2O4).The structure,thermostability,morphology,luminescence properties,cytotoxic effect and magnetism are investigated.The 5-ALA intercalated composite may correspond to a monolayered vertical arrangement,and the thermal stability of organics is enhanced after intercalation.The LRH precursor shows red emission of Eu^3+and the maximum emission peak of the composite is at 451 nm,corresponding to the blue emission.The detection of drug molecules can be realized through the change of luminescence.The magnetic nanohybrid shows strong magnetic sensitivity,which provides an easy and efficient way to separate 5-ALA-MgFe2O4@LGd0.95H:Eu0.05 particles from a sol or a suspension system and to carry drugs to targeted locations under an external magnetic field.The cytotoxic effect of MgFe2O4@LRH is observed with a sulforhodamine B(SRB)colorimetric assay,which has low cytotoxic effects on selected cells.The fabrication of novel bifunctional drug carriers based on LRH with magnetic and fluorescent properties has potential applications in drug detection and drug delivery.