γ-Fe_2O_3:A magnetic separable catalyst for synthesis of 5-substituted 1H-tetrazoles from nitriles and sodium azide

An efficient route for the synthesis of 5-substituted 1H-tetrazole via[2＋3]cycloaddition of nitriles and sodium azide is reported usingγ-Fe2O3 nanoparticles as a magnetic separable catalyst.Under optimized conditions,the moderate to good yields（71-95%） can be obtained.The catalyst can be easily separated by a magnet and reused for several circles.

Magnetic Properties and Activity of Pt-Er/γ-Al_2O_3 Catalysts

A series of Pt-Er/γ-Al2O3 catalysts containing 0. 5 % （mass fraction） platinum and 0.05 %-1.5 % Er were prepared by impregnation of γ-Al2O3 supported with different concentrations of erbium chloride solution. The surface properties of the catalysts were studied by methods of temperature programmed reduction and temperature programmed desorption. The magnetic behavior of Pt-Er/γ-Al2O3 catalysts were studied with a Faraday magnetic balance and the results show that the addition of Er can affect the surface properties, the catalytic activities, and magnetic behavior of the reforming catalysts. It is found that there is a corresponding relationship between the susceptibility and selectivity of Pt-Er/γ-Al2O3 catalysts. The experimental results show that Er plays the role of electron promoter.

α-Fe_(2)O_(3)/Cu_(2)O composites as catalysts for photoelectrocatalytic degradation of benzotriazoles

Given the difficulties of degrading benzotriazole(BTA),this study used a one-pot hydrothermal method to prepareα-Fe_(2)O_(3)/Cu_(2)O(FC)composites for photoelectrocatalytic(PEC)degradation of BTA.The characterization of FC structure showed that Cu_(2)O in cubic crystals was loaded with circular sheets of Fe_(2)O_(3).Owing to this structure,FC showed efficient PEC degradation of BTA when exposed to ultraviolet light.The experimental results demonstrated that FC efficiently degraded BTA.When the PEC degradation continued for 60 min,100%degradation of BTA was achieved because FC enhanced the photoelectron-hole separation and the separation and transfer of articulated carriers.High per-formance liquid chromatography-mass spectrometry showed that intermediates formed during the PEC degradation of BTA.Finally,various pathways for degradation of BTA were postulated.This FC-based PEC system provides a harmless and effective method for degradation of BTA.

Growth of High Magnetic a-Fe2O3 and Fe3O4 Nanowires via an Oxide Assisted Vapor-Solid Process

We describes a controllable synthesis procedure for growing a-Ee2O3 and Ee3O4 nanowires. High magnetic hematite a-Fe2O3 nanowires are successfully grown on Fe0.5Ni0.5 alloy substrates via an oxide assisted vapor-solid process. Experimental results also indicate that previous immersion of the substrates in a solution of oxalic acid causes the grown nanowires to convert gradually into magnetite （Fe3O4） nanowires. Additionally, the saturated state of Fe3O4 nanowires is achieved as the oxalic acid concentration reaches 0.75 mol/L. The average diameter and length of nanowires expands with an increasing operation temperature and the growth density of nanowires accumulates with an increasing gas flux in the vapor-solid process. The growth mechanism of a-Fe2O3 and Fe3O4 nanowires is also discussed. The results demonstrate that the entire synthesis of nanowires can be completed within 2 h.

Effect of Calcination Temperature on La-Modified Al2O3 Catalysts for Vapor Phase Hydrofluorination of Acetylene to Vinyl Fluoride

A La-modified Al2O3 catalyst was prepared with deposition-precipitation method. The effect of calcination temperature on the reactivity for vapor phase hydrofluorination of acetylene to vinyl fluoride. The catalysts calcined at different temperatures were characterized using NH3-TPD, pyridine-FTIR, X-ray diffraction, and Raman techniques. It was found that the calcination process could not only change the structure of these catalysts but also modify the amount of surface acidity on the catalysts. The catalyst calcined at 400 ℃ exhibited the highest conversion of acetylene （94.6%） and highest selectivity to vinyl fluoride （83.4%） and lower coke deposition selectivity （0.72%）. The highest activity was related to the largest amount of surface acidity on the catalyst, and the coke deposition was also related to the total amount of surface acidic sites.

Preparation and properties of magnetic alumina microspheres with a γ-Fe_2O_3/SiO_2 core and Al_2O_3 shell

Magnetic alumina composite microspheres with γ-Fe 2 O 3 core/Al 2 O 3 shell structure were prepared by the oil column method. A dense silica layer was deposited on the surface of γ-Fe 2 O 3 particles （denoted as γ-Fe 2 O 3 /SiO 2 ） with a desired thickness to protect the iron oxide core against acidic or high temperature conditions. γ-Fe 2 O 3 /SiO 2 /Al 2 O 3 particles with about 85 wt% Al 2 O 3 were obtained and showed to be suitable for practical applications as a magnetic catalyst or catalyst support due to their magnetic properties and pore structure. The products were characterized with scanning electron microscope （SEM） and transmission electron microscope （TEM）, nitrogen adsorption-desorption, and vibrating sample magnetometer （VSM）. The specific surface area and pore volume of the γ-Fe 2 O 3 /SiO 2 /Al 2 O 3 composite microspheres calcined at 500 ？ C were 200 m 2 /g and 0.77 cm 3 /g, respectively.

PREPARATION,CHARACTERIZATION AND HYDROGENATION PROPERTY OF POLYMER-SUPPORTED Pd-Fe_2O_3 COMPOSITE CATALYSTS

A series of polymer- supported Pd -Fe2O3 composite catalysts were prepared and their hydrogenation property mas investigated. It was found that the above catalysts have good catalytic hydrogenation activity for carbon - carbon double bonds systems and reusability. Furthermore, XPS and IR spectra shouted that active component in the composite catalysts is atomic Pd(0). An addition of a small amount of Fe2O3 has a promotive action upon hydrogenation activity of the catalysts, which indicated that there are some strong interactions (electron transfer) between Pd(0) and Fe(Ⅲ) species. Based on these results, a possible catalytic hydrogenation mechanism was also suggested.

Effects of Rare Earth Doping on the Properties of γ-Fe_2O_3 Magnetic Powder

The effects of rare earth doping on the formation process of α-FeOOH crystallite and the properties of γ-Fe2O3 magnetic powder were investigated. The growth of needle α FeOOH crystallite was completed by the basic process. The experimental results show that the rare earth doping can increase the aspect axial ratio of needle α-FeOOH grains. its anti-sintering capability during the heat-treatment and the thermostability of γ-Fe2O3 magnetic properties. The magnetic properties of γ-Fe2O3 doping with rare earth are as follows: the coercivity Hc=36.3 kA/m (445 Oe), the ratio saturation magnetization σs=90.4μWbm/kg (72 emu/g), the ratio remanent magnetization σr=54 μWbm/kg (43 emu/g), and the temperature coefficient of remanent magnetization of γ-Fe2O3 doping with 0.1 mol% Dy can reach -5 ×10-4℃-1.

Preparation and magnetic property of multi-walled carbon nanotube/α-Fe_2O_3 composites

In order to attain new functional nanomaterials with good magnetic property,multi-walled carbon nanotubes/hematite (MWNTs/α-Fe2O3)composites were synthesized using the co-deposition method.MWNTs/α-Fe2O3 composites were characterized by X-ray diffractometry(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM),Raman spectroscopy and vibrating sample magnetometry(VSM).The experimental results show that the structure and magnetic properties of the MWNTs/α-Fe2O3 composites are related to the heat treatment temperature.MWNTs are modified byα-Fe2O3 nano-particles andα-Fe2O3 nanorods with a diameter of 10-50 nm after being treated at 450℃.When the heat treatment temperature exceeds 600 ℃,MWNTs are only modified by Fe3O4 particles.Furthermore,the MWNTs composites treated at 450 ℃and 600℃have good magnetic behaviour.

Monolithic Mesh-Type Fe-Pd/γ-Al₂O₃/Al Bifunctional Catalysts for Electro-Fenton Degradation of Rhodamine B

A novel Fe-Pd bifunctional catalyst supported on mesh-type γ-Al2O3/Al was prepared and applied in the degradation of Rhodamine B (RhB). The monolithic mesh-type Fe-Pd/γ-Al2O3/Al bifunctional catalyst could be separated from the solution directly and could synthesize H2O2 in situ. The characterization results showed that Fe could improve the dispersion of Pd0, and the electronic interactions between Pd and Fe could increase the Pd0 contents on the catalyst, which increased the productivity of H2O2. Furthermore, DFT calculations proved that the addition of Fe could inhibit the dissociation of O2 and promote the nondissociative hydrogenation of O2 on the surface of Fe-Pd/γ-Al2O3/Al, which resulted in the increasement of H2O2 selectivity. Finally, the in-situ synthesized H2O2 by Pd was furtherly decomposed in situ by Fe to generateOH radicals to degrade organic pollutants. Therefore, Fe-Pd/ γ-Al2O3/Al catalysts exhibited excellent catalytic activity in the in-situ synthesis of H2O2 and the degradation of RhB due to the synergistic effects between Pd and Fe on the catalyst. It provided a new idea for the design of bifunctional electro-Fenton catalysts. Ten cycles of experiments showed that the catalytic activity of Fe-Pd/γ-Al2O3/Al catalyst could be maintained for a long time.

Polygonal mesopores microflower catalysts for the catalytic oxidation of 2-nitro-4-methylsulfonyltoluene to 2-nitro-4-methylsulfonylbenzoic acid in a continuous-flow microreactor

The development of efficient systems for the catalytic oxidation of 2-nitro-4-methylsulfonyltoluene(NMST)to 2-nitro-4-methylsulfonyl benzoic acid(NMSBA)with atmospheric air or molecular oxygen in alkaline medium presents a significant challenge for the chemical industry.Here,we report the synthesis of FeOOH/Fe_(3)O_(4)/metal-organic framework(MOF)polygonal mesopores microflower templated from a MIL-88B(Fe)at room temperature,which exposes polygonal mesopores with atomistic edge steps and lattice defects.The obtained FeOOH/Fe_(3)O_(4)/MOF catalyst was adsorbed onto glass beads and then introduced into the microchannel reactor.In the alkaline environment,oxygen was used as oxidant to catalyze the oxidation of NMST to NMSBA,showing impressive performance.This sustainable system utilizes oxygen as a clean oxidant in an inexpensive and environmentally friendly NaOH/methanol mixture.The position and type of substituent critically affect the products.Additionally,this sustainable protocol enabled gram-scale preparation of carboxylic acid and benzyl alcohol derivatives with high chemoselectivities.Finally,the reactions can be conducted in a pressure reactor,which can conserve oxygen and prevent solvent loss.Moreover,compared with the traditional batch reactor,the self-built microchannel reactor can accelerate the reaction rate,shorten the reaction time,and enhance the selectivity of catalytic oxidation reactions.This approach contributes to environmental protection and holds potential for industrial applications.

Enhanced CO oxidation over potassium-promoted Pt/Al_2O_3 catalysts:Kinetic and infrared spectroscopic study

A series of K-promoted Pt/Al2O3 catalysts were tested for CO oxidation. It was found that the addition of K significantly enhanced the activity. A detailed kinetic study showed that the activation energies of the K-containing catalysts were lower than those of the K-free ones, particularly for catalysts with high Pt contents （51.6 k）/mol for 0.42K-2.0Pt/Al2O3 and 6：3.6 kJ/mol for 2.0Pt/Al2O3 ）. The CO reaction orders were higher for the K-containing catalysts （about -0.2） than for the K-free ones （about -0.5）, with the former having much lower equilibrium constants for CO adsorption than the latter. In situ Fourier-transform infrared spectroscopy showed that surface CO desorption from the 0.42K-2.0Pt/Al2O3 catalyst was easier than from 2.0Pt/Al2O3. The promoting effect of K was therefore caused by weakening of the interactions between CO and surface Pt atoms. This decreased coverage of the catalyst with CO and facilitated competitive O2 chemisorption on the Pt surface, and significantly lowered the reaction barrier between chemisorbed CO and O2 species.

Methanation of syngas over coral reef-like Ni/Al_2O_3 catalysts

Coral reef-like Ni/Al2O3 catalysts were prepared by co-precipitation of nickel acetate and aluminium nitrate with sodium carbonate aqueous solution in the medium of ethylene glycolye.Methanation of syngas was carried out over coral reef-like Ni/Al2O3 catalysts in a continuous flow type fixed-bed reactor.The structure and properties of the fresh and used catalysts were studied by SEM,N2 adsorption-desorption,XRD,H2-TPR,O2-TPO,TG and ICP-AES techniques.The results showed that the coral reef-like Ni/Al2O3 catalysts exhibited better activity than the conventional Ni/Al2O3-H2O catalysts.The activities of coral reef-like catalysts were in the order of Ni/Al2O3-673Ni/Al2O3-573Ni/Al2O3- 473Ni/Al2O3-773.Ni/Al2O3-673-EG catalyst showed not only good activity and improved stability but also superior resistance to carbon deposition,sintering,and Ni loss.Under the reaction conditions of CO/H2（molar ratio）=1：3,593 K,atmospheric pressure and a GHSV of 2500 h-1,CH4 selectivity was 84.7%,and the CO conversion reached 98.2%.

Nanosized As_2O_3/Fe_2O_3 complexes combined with magnetic fluid hyperthermia selectively target liver cancer cells

AIM:To study the methods of preparing the magnetic nano-microspheres of Fe2O3 and As2O3/Fe2O3 complexes and their therapeutic effects with magnetic fluid hyperthermia(MFH). METHODS:Nanospheres were prepared by chemical co-precipitation and their shape and diameter were observed.Hemolysis,micronucleus,cell viability,and LD50 along with other in vivo tests were performed to evaluate the Fe2O3 microsphere biocompatibility.The inhibition ratio of tumors after Fe2O3 and As2O3/Fe2O3 injections combined with induced hyperthermia in xenograft human hepatocarcinoma was calculated. RESULTS:Fe2O3 and As2O3/Fe2O3 particles were round with an average diameter of 20 nm and 100 nm as observed under transmission electron microscope.Upon exposure to an alternating magnetic field(AMF),the temperature of the suspension of magnetic particles increased to 41-51℃,depending on different particle concentrations,and remained stable thereafter.Nanosized Fe2O3 microspheres are a new kind of biomaterial without cytotoxic effects.The LD50 of both Fe2O3 and As2O3/Fe2O3 in mice was higher than 5 g/kg.One to four weeks after Fe2O3 and As2O3/Fe2O3 complex injections into healthy pig livers,no significant differences were found in serum AST,ALT,BUN and Cr levels among thepigs of all groups(P>0.05),and no obvious pathological alterations were observed.After exposure to alternating magnetic fields,the inhibition ratio of the tumors was significantly different from controls in the Fe2O3 and As2O3/Fe2O3 groups(68.74% and 82.79%,respectively; P<0.01).Tumors of mice in treatment groups showed obvious necrosis,while normal tissues adjoining the tumor and internal organs did not. CONCLUSION:Fe2O3 and As2O3/Fe2O3 complexes exerted radiofrequency-induced hyperthermia and drug toxicity on tumors without any liver or kidney damage. Therefore,nanospheres are ideal carriers for tumortargeted therapy.

2D/2D step-schemeα-Fe2O3/Bi2WO6 photocatalyst with efficient charge transfer for enhanced photo-Fenton catalytic activity

Although the traditional Fenton reaction is considered an effective strategy for solving problems caused by environmental pollution,construction of an efficient photocatalytic system by coordinating the Fenton reaction is challenging.In this study,2D/2D step-schemeα-Fe2O3/Bi2WO6(FO/BWO)heterostructure photo-Fenton catalysts were successfully fabricated by a facile hydrothermal method.The as-prepared materials were characterized by XRD,FT-IR,TEM,XPS,UV-vis DRS,PL,I-t,EIS,and BET analyses.Under visible light irradiation,FO/BWO exhibited remarkably high and stable photo-Fenton catalytic activity for the degradation of methyl blue(MB)at low concentrations of H2O2.It was noted that FO/BWO(0.5)displayed a significantly enhanced photo-Fenton catalytic activity,which was 11.06 and 3.29 times those of FO nanosheets and BWO nanosheets,respectively.The notably improved photo-Fenton catalytic activity of FO/BWO was mainly due to the combination of H2O2 and FO under light illumination and the presence of the 2D/2D S-scheme heterostructure,with the large contact surface,abundant active sites,and efficient separation rate of photogenerated carriers playing contributory roles.Additionally,a possible catalytic mechanism for the FO/BWO composite was preliminarily proposed via active species trapping experiments.In summary,this study provided new insights into the synthesis of an effectively heterogeneous 2D/2D S-scheme photo-Fenton catalyst for degradation of organic pollutants in wastewater.

Investigation of the characteristics and deactivation of catalytic active center of Cr-Al_2O_3 catalysts for isobutane dehydrogenation

Deactivation mechanism of Cr-Al2O3catalyst and the interaction of Cr-A1 in the dehydrogenation of isobutane, as well as the nature of the catalytic active center, were studied using XRD, SEM, XPS, H2-TPR, isobutane-TPR and TPO techniques. The results revealed that the deactivation of Cr-Al2O3 catalyst was mainly caused by carbon deposition on its surface. The Cr3＋ ion could not be reduced by hydrogen but could be reduced to Cr2＋ by hydrocarbons and monoxide carbon. The active center for isobutane dehydrogenation could be Cr2＋/Cr3＋ produced from Cr6＋ by the on line reduction of hydrocarbon and carbon monoxide. The binding energy of Al3＋ was strongly affected by the state of chromium cations in the catalysts.

Effect of Al_2O_3 Binder on the Precipitated Iron-Based Catalysts for Fischer-Tropsch Synthesis

A series of iron-based Fischer-Tropsch synthesis （FTS） catalysts incorporated with Al2O3 binder were prepared by the combination of co-precipitation and spray drying technology. The catalyst samples were characterized by using N2 physical adsorption, temperature-programmed reduction/desorption （TPR/TPD） and MSssbauer effect spectroscopy （MES） methods. The characterization results indicated that the BET surface area increases with increasing Al2O3 content and passes through a maximum at the Al2O3/Fe ratio of 10/100 （weight basis）. After the point, it decreases with further increase in Al2O3 content. The incorporation of Al2O3 binder was found to weaken the surface basicity and suppress the reduction and carburization of iron-based catalysts probably due to the strong K-Al2O3 and Fe-Al2O3 interactions. Furthermore, the H2 adsorption ability of the catalysts is enhanced with increasing Al2O3 content. The FTS performances of the catalysts were tested in a slurry-phase continuously stirred tank reactor （CSTR） under the reaction conditions of 260 ℃, 1.5 MPa, 1000 h^-1 and molar ratio of H2/CO 0.67 for 200 h. The results showed that the addition of small amounts of Al2O3 affects the activity of iron-based catalysts to a little extent. However, with further increase of Al2O3 content, the FTS activity and water gas shift reaction （WGS） activity are decreased severely. The addition of appropriate Al2O3 do not affect the product selectivity, but the catalysts incorporated with large amounts of Al2O3 have higher selectivity for light hydrocarbons and lower selectivity for heavy hydrocarbons.

Ethanol steam reforming over Ni-Cu/Al_2O_3-M_yO_z (M = Si, La, Mg,and Zn) catalysts

Ni-based catalysts doped with copper additives were studied on their role in ethanol steam reforming reaction. The effects of Cu content, support species involving Al2O3-SIO2, Al2O3-MgO, Al2O3-ZnO, and Al2O3-La2O3, on the catalytic performance were studied. Characterizations by TPR, XRD, NH3-TPD, XPS, and TGA indicated that catalysts 30Ni5Cu/Al2O3-MgO and 30Ni5Cu/Al2O3-ZnO have much higher H2 selectivity than 30Ni5Cu/Al2O3-SiO2, as well as good coke resistance. H2 selectivity for 30Ni5Cu/Al2O3-MgO catalyst was 73.3% at 450 ℃ and increased to 94.0% at 600℃, whereas for 30Ni5Cu/Al2O3-ZnO catalyst, the H2 selectivity was 63.6% at 450 ℃ and 95.2% at 600℃. TheseAl2O3-MgO and Al2O3-ZnO supported Ni-Cu bimetallic catalysts may have important applications in the production of hydrogen by ethanol steam reforming reactions.

Research on KOH/La-Ba-Al_2O_3 catalysts for biodiesel production via transesterification from microalgae oil

Alumina supports modified by lanthanum （La） and barium （Ba） were prepared by peptization. Catalysts with different KOH contents supported on modified alumina were prepared by impregnation method. Various techniques, including N2 adsorption-desorption （Brunauer-Emmet-Teller method, BET）, X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and fourier transform infrared absorption spectroscopy （FT-IR）. Catalytic activity for microalgae oil conversion to methyl ester via transesterification was evaluated and analyzed by GC-MS and GC. BET results showed that the support possessed high specific surface area, suitable pore volume and pore size distribution. Activity results indicated that the catalyst with 25 wt% KOH showed the best activity for microalgae oil conversion. XRD and SEM results revealed that Al-O-K compound was the active phase for microalgae oil conversion. The agglomeration and changing of pore structure should be the main reasons for the catalyst deactivation when KOH content was higher than 30 wt%.

Preparation of Fe_2P/Al_2O_3 and FeP/Al_2O_3 catalysts for the hydrotreating reactions

A 60%Fe/Al_2O_3 catalyst was prepared by the co-precipitation method.It was reduced by H_2 to produce metallic Fe,which was then sulfided by CS_2 to Fe_(0.96) S and Fe_3S_4 or phosphided by triphenylphosphine(PPh3) in liquid phases to Fe2 P and Fe P.It was found that the iron sulfides(Fe0.96 S and Fe_3S_4) exhibited the low activity for the hydrodesulfurization(HDS) reactions.The HDS activity was also low on the Fe(metal)/Al_2O_3 and Fe_2 P/Al_2O_3 catalysts since they were converted into Fe0.96 S and Fe_3S_4 during the HDS reactions.In contrast,the FeP/Al_2O_3 was found to be stable and active for the HDS reactions.In particular,Fe P/Al_2O_3 possessed significantly smaller Fe P particles than Fe P/C,leading to the significant higher HDS activity of FeP/Al_2O_3 than Fe P/C.