Adsorptive Removal of Copper Ions from Aqueous Solution Using Cross-linked Magnetic Chitosan Beads

The performance of cross-linked magnetic chitosan, coated with magnetic fluids and cross-linked with ePichlorohydrin, was investigated for the adsorption of Copper （Ⅱ） from aqueous solutions. Infrared spectra of chitosan before and after modification showed that the coating and cross-linking are effective. Experiments were performed at different pH of solution and contact time, and appropriate conditions for the adsorption of Cu（Ⅱ） were determined. Experimental equilibrium data were correlated with Langmuir and Freundlich isotherms for determination of the adsorption potential. The results showed that the Langmuir isotherm was better compared with the Freundlich isotherm, and the uptake of Cu（Ⅱ） was 78.13 mg·g^- 1. The kinetics of adsorption corresponded with the first-order Langergren rate equation, and Langergren rate constants were determined.

Preparation of Magnetic Chitosan Nanoparticles and Immobilization of Laccase

The magnetic chitosan nanoparticles were prepared by reversed-phase suspension method using Span-80 as an emulsifier, glutaraldehyde as cross-linking reagent. And the nanoparticles were characterized by TEM, FT-IR and hysteresis loop. The results show that the nanoparticles are spherical and almost superparamagnetic. The laccase was immobilized on nanoparticles by adsorption and subsequently by cross-linking with glutaraldehyde. The immobilization conditions and charac-terizations of the immobilized laccase were investigated. The optimal immobilization conditions were as follows： 10 mL of phosphate buffer （0.1 M, pH 7.0） containing 50 mg of magnetic chitosan nanoparticles, 1.0 mg·mL-1 of laccase and 1% （v/v） glutaraldehyde, immobilization temperature of 4 ℃ and immobilization time of 4 h. The immobilized laccase exhibited an appreciable catalytic capability （480 units·g-1 support） and had good storage stability and operation stability. The Km of immobilized and free laccase for ABTS were 140.6 and 31.1 μM in phosphate buffer （0.1 M, pH 3.0） at 37 ℃, respectively. The immobilized laccase is a good candidate for the research and development of biosensors based on laccase catalysis.

Single-step synthesis of magnetic chitosan composites and application for chromate(Cr(Ⅵ))removal

Magnetic chitosan composites(Fe3O4@chitosan) were synthesized in one single-step, characterized and applied in Cr(VI) removal from water. With the increase of loading proportion of chitosan, Cr(Ⅵ) adsorption capacity of Fe3O4@chitosan composites increased from 10.771 to 21.040 mg/g. The optimum adsorption capacities of Cr(VI) on Fe3O4@chitosan-3 were found in a pH range of 3.0-5.0. Kinetic study results show that the adsorption process follows pseudo-second-order model, indicating that the rate-limiting step in the adsorption of Cr(Ⅵ) involves chemisorptions. Moreover, FT-IR spectra analysis confirms that the amine and hydroxyl groups of chitosan are predominantly responsible for binding. Results from this work demonstrate that the prepared Fe3O4@chitosan composites possess great potential in Cr(Ⅵ) removal from contaminated water.

Selective adsorption behavior of ion-imprinted magnetic chitosan beads for removal of Cu(Ⅱ) ions from aqueous solution

Heavy metal ion is one of the major environmental pollutants.In this study,a Cu(Ⅱ)ions imprinted magnetic chitosan beads are prepared to use chitosan as functional monomer,Cu(Ⅱ)ions as template,Fe_(3)O_(4) as magnetic core and epichlorohydrin and glutaraldehyde as crosslinker,which can be used for removal Cu(Ⅱ)ions from wastewater.The kinetic study shows that the adsorption process follows the pseudosecond-order kinetic equations.The adsorption isotherm study shows that the Langmuir isotherm equation best fits for the monolayer adsorption processes.The selective adsorption properties are performed in Cu(Ⅱ)/Zn(Ⅱ),Cu(Ⅱ)/Ni(Ⅱ),and Cu(Ⅱ)/Co(Ⅱ)binary systems.The results shows that the ⅡMCD has a high selectivity for Cu(Ⅱ)ions in binary systems.The mechanism of ⅡMCD recognition Cu(Ⅱ)ions is also discussed.The results show that the ⅡMCD adsorption Cu(Ⅱ)ions is an enthalpy controlled process.The absolute value of DH(Cu(Ⅱ))and DS(Cu(Ⅱ))is greater than DH(Zn(Ⅱ),Ni(Ⅱ),Co(Ⅱ))and DS(Zn(Ⅱ),Ni(Ⅱ),Co(Ⅱ)),respectively,this indicates that the Cu(Ⅱ)ions have a good spatial matching with imprinted holes on ⅡMCD.The FTIR and XPS also demonstrates the strongly combination of function groups on imprinted holes in the suitable space position.Finally,the ⅡMCD can be regenerated and reused for 10 times without a significantly decreasing in adsorption capacity.This information can be used for further application in the selective removal of Cu(Ⅱ)ions from industrial wastewater.

Preparation of cross-linked magnetic chitosan with quaternary ammonium and its application for Cr(Ⅵ) and P(Ⅴ) removal

Pollutants that exist in anionic species are issues of concern in water treatment. Compared to cationic pollutants, the removal of anionic pollutants by adsorption is more difficult because most adsorbents carry predominantly negative charges in neutral and alkaline environments. In this study, a cross-linked chitosan derivative with quaternary ammonium and magnetic properties（QM-chitosan） was prepared and employed to remove chromium（VI） and phosphorus（V）（Cr（VI） and P（V）） from aqueous environments. The QM-chitosan was characterized by Fourier transform infrared spectrometry（FT-IR）,thermogravimetric analysis（TGA）, energy dispersive X-ray（SEM-EDX） and zeta potential.Batch experiments show that QM-chitosan can effectively remove Cr（VI） and P（V）, and the main mechanism was believed to be electrostatic interaction. A pseudosecond-order model was fitted to describe the kinetic processes of Cr（VI） and P（V） removal. The adsorption isotherms of both Cr（VI） and P（V） on the QM-chitosan were well fitted by the Langmuir isotherm equation. The saturated adsorption capacity of P（V）（2.783 mmol/g） was found to be higher than that of Cr（VI）（2.323 mmol/g）, resulting from the size of the H2PO-4ions being smaller than that of the HCr O-4ions. However, the theoretical calculation and experimental results showed that QM-chitosan had a stronger affinity for Cr（VI） than P（V）. The adsorption–desorption of the QM-chitosan was evaluated, and high regeneration rates were demonstrated.

Synthesizing and characterizing the magnetic EDTA/chitosan/CeZnO nanocomposite for simultaneous treating of chromium and phenol in an aqueous solution

A new magnetic nanocomposite chitosan/EDTA/CeZnO(MEC-CeZnO)is synthesized as an efficient and eco-friendly bio-compound for the removal of chromium Cr(VI)metal ions and phenol organic matters from aqueous solutions.Nanocomposites are characterized using field emission scanning electron microscope,energy dispersive X-ray spectroscopy,transmission electron microscope,X-ray diffraction,X-ray photoelectron spectroscopy,Fourier transform infrared spectroscopy,diffuse reflection spectroscopy,and PL methods.The reduction rate of Cr(VI)ions and phenol degradation is evaluated under various experimental conditions,separately and simultaneously.The average pore diameter and specific surface of MEC-CeZnO nanocomposite are obtained 50 nm and 210 m^(2)·g^(-1)respectively,which suggest the successful synthesis of the nanocomposite because of the increased surface area and reduced pores in comparison to previous studies.Moreover,the best Cr(VI)and phenol reduction efficiencies are 98%and 92%at 180 min of retention time,both following the Langmuir-Hinshelwood first-order kinetics.The mechanisms of Cr(VI)and phenol removal from aqueous solutions involved Cr(VI)reduction,phenol oxidation,and adsorption.Examining the reusability of MEC-CeZnO showed that both degradation and recovery capacity is stable in 5 cycles.

Chemically modified magnetic chitosan microspheres for Cr（VI） removal from acidic aqueous solution

A bioadsorbent composed of magnetic silica nanoparticles encapsulated by chitosan microspheres was prepared by the emulsion cross-linking method, and it was then modified with quaternary ammonium groups by reaction with ethylenediamine and glycidyl trimethylammonium chloride. Characterization of the bioadsorbent indicated that it was highly acid resistant and magnetically responsive. The bioadsor- bent was then used to remove Cr（VI） from acidic aqueous solution. The results of batch experiments indicated that the optimal pH value was 2.5, and the adsorbent exhibited low pH dependence. The maximum adsorption capacity was 233.1mg/g at pH 2.5 and 25 ℃, and the equilibrium time was deter- mined to be 40-120 min depending on the initial Cr（VI） concentration. The adsorbent could be effectively regenerated using a mixture of 0.3 mol/L NaOH and 0.3 mol/L NaCI with a desorption efficiency of 95.6%, indicating high reusability. In conclusion, the bioadsorbent shows potential for Cr（VI） removal from acidic