Experimental Measurements of the Sensitivity of Fiber-optic Bragg Grating Sensors with a Soft Polymeric Coating under Mechanical Loading,Thermal and Magnetic under Cryogenic Conditions

The strain and temperature sensing performance of fiber-optic Bragg gratings （FBGs） with soft polymeric coating, which can be used to sense internal strain in superconducting coils, are evaluated under variable cryogenic field and magnetic field. The response to a temperature and strain change of coated-soft polymeric FBGs is tested by comparing with those of coated-metal FBGs. The results indicate that the coated-soft polymeric FBGs can freely detect temperature and thermal strain, their At variable magnetic field, the tested results indicate accuracy and repeatability are also discussed in detail. that the cross-coupling effects of FBGs with different matrixes are not negligible to measure electromagnetic strain during fast excitation. The present results are expected to be able to provide basis measurements on the strain of pulsed superconducting magnet/cable （cable- around-conduit conductors, cable-in-conduit conductors）, independently or utilized together with other strain measurement methods.

Enhancement of pentlandite surface magnetism and implications for its separation from serpentine via magnetic separation

The magnetism of pentlandite surface was enhanced through the selective precipitation of micro-fine magnetite fractions on pentlandite surfaces. This was achieved through adjustment of slurry pH and addition of surfactants. The results showed that at pH 8.8 with the addition of 100 g/t sodium hexametaphosphate, 4.5 L/t oleic acid, and 4.5 L/t kerosene, significant amount of fine magnetite particles adhered to the pentlandite surface, while trace amount of coating was found on serpentine surfaces. Thus, the magnetism of pentlandite was enhanced and pentlandite was well separated from serpentine by magnetic separation under the magnetic field intensity of 200 kA/m. Scanning electron microscopy （SEM） and zeta potential measurement were performed to characterize changes of mineral surface properties. Calculations of the extended Derjaguin-Landau-Verwey-Ocerbeek （EDLVO） theory indicated that, in the presence of surfactants the total interaction energy between magnetite and pentlandite became stronger than that between magnetite and serpentine. This enabled the selective adhesion of magnetite particles to pentlandite surfaces, thereby enhancing its magnetism.

Effect of Temperature on Thermal Treatment of Silica Coated Magnetic Nanoparticles

In the quest for developing a catalyst with as many desired characteristics, a facile synthetic route was designed for the preparation of mesoporous silica coated magnetic nanoparticles（MSMNP） employing a colloid mill reactor. The composite particles were characterized by the techniques, such as nitrogen adsorption-desorption isotherms, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, X-ray diffraction patterns （XRD）, thermo-gravimetric analysis（TGA）, Fourier transform infrared spectroscopy（FTIR） and vibrating sample magnetometer（VSM）, etc. The analysis showed that the resulted MSMNP composites were composed of silica shell layers with open pores connecting channels and NiFe204 with spinel structure, so the thermal treatment temperature did not show significant effect on pore textural properties, and its specific surface areas were in the range of 443-- 474 m2/g, while pore volume of about 0.8 cm3/g with an average pore size of around 9.5 nm. The composites with super paramagnetic nature were encapsulated entirely with amorphous silica layers contributing to optimum porosity and abundant surface hydroxyl groups.

An optical fiber magnetic field sensor based on fiber spherical structure interferometer coated by magnetic fluid

A novel magnetic field sensor based on optical fiber Mach-Zehnder interferometer(MZI) coated by magnetic fluid(MF) is proposed. The MZI consists of two spherical structures formed on standard single mode fiber(SMF). The interference wavelength and the power of the sensing structure are sensitive to the external refractive index(RI). Since RI of the MF is sensitive to the magnetic field, the magnetic field measurement can be realized by detecting the variation of the interference spectrum. Experimental results show that the wavelength and the power of interference dip both increase with the increase of magnetic field intensity.

High-frequency field intensity along focal point of a long metallic parabolic reflector coated by a magnetized plasma layer using oblique incidence

Theoretical analysis of the electromagnetic field distribution in the focal region of a long metallic parabolic reflector that has its surface covered with a magnetized plasma layer is derived. The incident wave is considered to be with a general oblique incidence for both parallel and perpendicular polarizations. The electromagnetic field intensity expressions along the focal region are obtained accurately using Maslov＇s method. The effects of plasma thickness on the reflected and transmitted field distributions are investigated. The effects of other physi- cal parameters such as the angle of incidence and the plasma and cyclotron frequencies on the transmitted field- intensity distribution along the focal region are also studied. The results obtained by Maslov＇s method and Kirchhoff＇s approximation are found to be in a good agreement.