EXPERIMENTAL MEASUREMENT OF MAGNETIC FIELD IN A NOVEL FLOW CONTROL OF MOLD

In order to know the distribution of magnetic field in a novel flow control of mold (NFC Mold) and to provide the experimental data for the electromagnetic structure design and the analysis of flow control in continuous casting mold, the magnetic field in a NFC Mold were measured by Tesla meter of Model CT-3. The method of vector synthesis was adopted in the measurement of magnetic fields. The results showed that the magnetic field in the NFC Mold was composed of two main magnetic areas that were symmetrical. Although there was leaking magnetic flux between the lower surface of the upper pole and the upper surface of the lower pole on the sides, it was restrained by the main magnetic fields effectively. Therefore the NFC Mold was more preferably satisfied to be used in controlling the molten steel flow in continuous casting mold.

Magnetic Field Measurement with Heisenberg Limit Based on Solid Spin NOON State

The maximum entangled number state （NOON state） can improve the sensitivity of physical quantity measure- ment to the Heisenberg limit 1/N. In this work, the magnetic field measurement based on the individual solid spin NOON state is investigated. Based on the tunable effective coupling coefficient, we propose a generation scheme of the three-spin NOON state, i.e, the Creenberger-Horne-Zeilinger （CHZ） state, and discussed the mea- surement resolution reduction due to decoherence. It is unnecessary to entangle spins as many as possible when decoherence exists. In practice, defect spins in diamond and alp donors with long coherence time can be applied with current techniques in the nano-scaled high resolution magnetic measurement.

Preliminary Study of the Feasibility of Inverse Problem Algorithms Used for Arc Magnetic Measurement Method

Non-contact magnetic measurement method is an effective way to study the air arc behavior experimentally. One of the crucial techniques is to solve an inverse problem for the electromagnetic field. This study is devoted to investigating different algorithms for this kind of inverse problem preliminarily, including the preconditioned conjugate gradient method, penalty function method and genetic algorithm. The feasibility of each algorithm is analyzed. It is shown that the preconditioned conjugate gradient method is valid only for few arc segments, the estimation accuracy of the penalty function method is dependent on the initial conditions, and the convergence of genetic algorithm should be studied further for more segments in an arc current.

Temperature Dependent Zeno Time for a Two Level Atom Traversing through a Thermal Magnetic Barrier in the Framework of Weak Measurement

The Zeno time has been calculated for a metastable two-level atom tunneling through a interacting thermal magnetic field. The process of weak measurement has been utilized for the estimation of the timescale. Zeno time has been shown to be temperature dependent. From the calculation it is evident that the Zeno time decreases with the increase of temperature. Moreover, the result restricts the Zeno time to a maximum limiting value, irrespective of how frequent the measurement process is.

The Magnetic Anisotropy and Complete Phase Diagram of CuFeO2 Measured in a Pulsed High Magnetic Field up to 75 T

The magnetization behavior of a CuFeO2 single crystal grown by the floating zone technique is investigated with a pulsed high magnetic field. We observe a series of field-induced multi-step-like transitions with hysteresis, of which the critical magnetic fields are temperature-dependent and show anisotropy. By using a pulsed high magnetic field up to 75 T, the magnetization behavior shows that the critical transition magnetic fields of spin- flip/flop shift to lower field regions with an increase in temperature. According to the magnetization curves, a complete magnetic phase diagram is depicted.

A Magnetic Disturbance Compensation Method Based on Magnetic Dipole Magnetic Field Distributing Theory

The interference of carrier magnetic field to geomagnetic field has been a difficult problem for a long time,which influences on the deviation of navigation compass and the error of geomagnetic measurement. To increase the geomagnetic measuring accuracy required for the geomagnetic matching localization,the strategy to eliminate the effect of connatural and induced magnetic fields of carrier on the geomagnetic measuring accuracy is investigated. The magnetic-dipole's magnetic field distributing theory is used to deduce the magnetic composition in the position of the sensor installed on the carrier. A geomagnetic measurement model is established by using the measuring data with the ideal sensor. Considering the magnetic disturbance of carrier and the error of sensor,a geomagnetic measuring compensation model is built. This model can be used to compensate the errors of carrier magnetic field and magnetic sensor in any case and its parameters have clear or specific physical meaning. The experimented results show that the model has higher geomagnetic measuring accuracy than that of others.

Investigating Levels of Low Frequency Magnetic Field in the Inhabited Vicinity of Power Transmission Lines of Kuwait

According to surveyed literature, there may be a health hazard associated with extremely low frequency magnetic fields. This study aims at presenting a recent survey of this literature. It also aims at measuring magnetic field levels close to power transmission lines at inhabited areas in Kuwait to see if current levels are safe and to establish a database of 50 Hz magnetic field levels at inhabited areas. Measurements were made, according to the international standard procedures in winter, spring, summer and fall, and three times of a day. Four inhabited areas were surveyed. Results provide us with an independent view of the levels in the vicinity of power lines and houses. Results show that the highest level is measured in the summer, reaching 115 mG while the minimum level is measured in the fall. We found that some houses were at less than 50 meters distance from the edge of the transmission lines. Some houses were, as close as 22 meters to the line. We found that levels at the entrance of houses and at outdoor parking areas were mostly higher than 4 mG.

Fully and Partly Divergence and Rotation Free Interpolation of Magnetic Fields

A new interpolation method for rotation and divergence free fields is presented. It is based on a suitable choice of a tricubic interpolation scheme and reaches an accuracy of third order in grid size (Δx). With the interpolation method it is possible to increase the accuracy with a factor of grid size/distance with respect to the trilinear interpolation method using exactly the same data points. Simulations for several distances of dipoles (r) to the interpolation area show that the maximum relative deviation is approximately 3(Δx/r)3 ppm.

Preliminary experimental study on applicability of Lorentz force velocimetry in an external magnetic field

Lorentz force velocimetry(LFV) is a noncontact technique for measuring electrically conducting fluids based on the principle of electromagnetic induction. This work aims to answer the open and essential question of whether LFV can work properly under a surrounding external magnetic field(ExMF). Two types of Ex MFs with different magnetic intensities were examined: a magnetic field with a typical order of 0.4 T generated by a permanent magnet(PM) and another generated by an electromagnet(EM) on the order of 2 T. Two forces, including the magnetostatic force between the Ex MF and PM in the LFV, and the Lorentz force generated by the PM in LFV were measured and analyzed in the experiment. In addition,Ex MFs of varying strengths were added to the LFV, and the location of the LFV device in the iron cores of the EM was considered. The experimental outcomes demonstrate that it is possible for a LFV device to operate normally under a moderate Ex MF. However, the magnetostatic force will account for a high proportion of the measured force,thus inhibiting the normal LFV operation, if the Ex MF is too high.

Characteristics of Controlled Bridge Circuit and Its Application in Magnetic Field Induction Measurement

The article designs a new type of bridge circuit with a controlled source—when the resistance on the bridge arm of the controlled source bridge circuit meets the bridge balance condition, and the bridge branch contains only one Current-Controlled Current Source (CCCS), a Voltage-Controlled Current Source (VCCS), a Current-Controlled Voltage Source (CCVS), or a Voltage-Controlled Voltage Source (VCVS), the circuit is called a controlled bridge circuit, which has the characteristics of bridge balance. Due to the relationship between the controlled source and the bridge arm, the sensitivity of the components on the bridge is higher mathematically and logically. When applied to measurement, engineering, automatic control, and other fields, the controlled bridge circuit has higher control ac-curacy. Mathematical derivation and simulation results prove the correctness of the bridge balance conclusion and the special properties of this bridge when applied to the measurement field.

Design and commissioning of Brav measurement system for SC200 superconducting cyclotron

The SC200 proton therapy superconducting cyclotron was developed by ASIPP (Hefei, China) and JINR (Dubna, Russia). A measurement system was designed to assess the average radial component of the magnetic field (Brav) with 15 search coils in the median plane. The winding differences of the search coils affect the measurement accuracy of the Brav. Based on the electromagnetic induction principle, to measure the Brav accurately, this paper focuses on the design and commissioning of the Brav measurement system. The preliminary results confirm that the system design is reasonable and suitable. After testing the search coil at different speeds, the optimal speed was determined as 2.5 mm/s. The relative error was approximately 0.1% under the maximum radial component of the magnetic field Br of 7 G. The measurement precision was up to 1.0×10^-3, which can provide the required measurement tolerance of 3–7 G for Br in the median plane. The commissioning of the Brav measurement system is an important step for Br measurement. It can check and adjust the asymmetry of the superconducting coils (SCs).

Superconducting multipole wiggler with large magnetic gap for HEPS-TF

A 16-pole superconducting multipole wiggler with a large gap of 68 mm was designed and fabricated to serve as a multipole wiggler for HEPS-TF.The wiggler consists of 16 pairs of NbTi superconducting coils with a period length of 170 mm,and its maximum peak field is 2.6 Tesla.In magnet design,magnet poles were optimized.Furthermore,the Lorentz force on the coils and electromagnetic force between the upper and lower halves were computed and analyzed along with the stored energy and inductance at different currents.To enhance the critical current of the magnet coil,all the pole coils selected for the magnet exhibited excellent performance,and appropriate prestress derived from the coil force analysis was applied to the pole coils during magnet assembly.The entire magnet structure was immersed in 4.2-K liquid helium in the cryostat cooled solely by four two-stage cryocoolers,and the performance test of the superconducting wiggler was appropriately completed.Based on the measured results,the first and second field integrals on the axis of the superconducting wiggler were significantly improved at different field levels after the compensation of the corrector coils.Subsequently,the wiggler was successfully installed in the storage ring of BEPCII operation with beams.

Upgrade of the magnetic diagnostic system for restart of HT-6M operation

The HT-6M tokamak at the Thailand Institute of Nuclear Technology has been restarted.In order to ensure the smooth breakdown of plasma and obtain plasma discharge parameters,optimization of the poloidal field coils and upgrade of the magnetic diagnostics are described in this article.A perfect null field(stray field in the main chamber<10 G)is obtained using an ohmic heating field.To obtain important information about the plasma,an external magnetic diagnostics system is designed and calibrated,including a Rogowski coil(measuring plasma current),a magnetic probe(measuring external field),diamagnetic loops(measuringβ_(p))and so on.In order to realize high-frequency signal measurement and transmission,a series of frequency responses with the magnetic probe and transmission line are tested.Later,to verify the null field,a fitting code is developed to reconstruct the stray field in the vacuum chamber based on magnetic probe measurements and flux loops.The results show that the error is within 1.5%.This indicates the accuracy of the magnetic measurement system and ensures the preparation for the breakdown of plasma.

Speed Measurement Feasibility by Eddy Current Effect in the High-Speed MFL Testing

It is known that eddy current effect has a great influence on magnetic flux leakage testing(MFL).Usually,contacttype encoder wheels are used to measure MFL testing speed to evaluate the effect and further compensate testing signals.This speed measurement method is complicated,and inevitable abrasion and occasional slippage will reduce the measurement accuracy.In order to solve this problem,based on eddy current effect due to the relative movement,a speed measurement method is proposed,which is contactless and simple.In the high-speed MFL testing,eddy current induced in the specimen will cause an obvious modification to the applied field.This modified field,which is measured by Hall sensor,can be utilized to reflect the moving speed.Firstly,the measurement principle is illustrated based on Faraday’s law.Then,dynamic finite element simulations are conducted to investigate the modified magnetic field distribution.Finally,laboratory experiments are performed to validate the feasibility of the proposed method.The results show that Bmz(r1)and Bmx(r2)have a linear relation with moving speed,which could be used as an alternative measurement parameter.

Residual Magnetic Anomalies Mapping from CHAMP Observations

CHAMP high-quality vector magnetometer observations collected from July 2000 to September 2010 have been used to map the residual vector magnetic anomaly fields. This field is so called the lithospheric magnetic field which is the result of two contributions of the induced and the remanent magnetization. It is therefore essential to study the magnetic properties of the crustal rocks. Isolating this field from the other contributions, interpreting and even defining are however difficult and still debated. We investigate how to identify and separate the lithospheric vector magnetic field ΔX, ΔY and ΔZ from other contributions. For this purpose we use selected night magnetic data from which we remove a model field of degree 16 and external model field of degree 2 developed by spherical harmonics analysis. Concerning the induced lithospheric field which is assumed to be aligned with the internal dipole was also removed. To minimize the secular variation effects, we calculated internal models for each two months. The method developed here has been successfully applied to isolate lithospheric field produced by remanent magnetizations from CHAMP satellite data. The resolution and altitude measurements make it very hard to map short wavelength crustal magnetic anomalies. The large-scale strong magnetic anomalies detected using this technique are in agreement with previous global magnetic maps. These anomalies appear with an amplitude of about 10 nT at satellite altitude such as Bangui’s anomaly.

Study of Electromagnetic Compatibility in Hospital Environments

This paper presents a study on the effects of radiation from electronic equipment in hospitals. This study was performed in Argentinean, Colombian and Spanish hospitals. The work consists of two parts: a survey to determine the hospital personnel’s knowledge of the problem and a technical part consisting of a measurements campaign to determine the levels of radiated electrical and magnetic fields in several hospitals due to the presence of electromagnetic interferences, such as the use of mobile phones. The study of this problem has been of special interest in countries such as the USA and Canada, and this paper attempts to convey the necessity of creating regulations that can be applied to the hospitals of the countries analyzed. More than fifty hospitals were studied in these three countries, considering the following aspects: the hospital personnel’s awareness of the problem, whether the hospitals have performed previous studies of this type, the appearance of problems in medical equipment due to this interference, the origin of the interference, and the failures that have appeared in computers due to electromagnetic interference. The results show that, most hospitals have a lack of knowledge regarding this issue and that field levels above those allowed by international regulations are present. Therefore, a regulation must be established to avoid the problem.

Response optimization of a three-axis sensitive SERF magnetometer for closed-loop operation

Most triaxial-vectorial magnetic field measurements with spin-exchange relaxation free(SERF)atomic magnetometer(AM)are based on the quasi-steady-state solution of the Bloch equation.However,the responding speed of these methods is greatly limited because the frequency of the modulation signal should be slow enough to ensure the validity of the quasi-steady-state solution.In this work,a new model to describe the response of the three-axis sensitive SERF AM with high modulation frequency is presented and verified.The response of alkali-atomic spin to high-frequency modulation field is further investigated by solving the Bloch equation in a modulation-frequency-dependence manner.This solution is well verified by our experiments and can offer a reference for selection of modulation frequencies.The result shows a potential to achieve a SERF AM operating in a geomagnetic field without heavy aluminum shielding when the modulation frequencies are selected properly.

Magnetic field measurement on ^(87)Rb atomic fountain clock

An experiment on measuring the magnetic field in Ramsey interaction region of the atomic fountain clock by detecting the Zeeman frequency shift of 87Rb hyperfine transition is presented.By mu-metal shielding and coils compensating,the magnetic fluctuations resulting from asymmetry and instability are less than 10 and 0.025 nT,respectively.The relative frequency uncertainty of atomic fountain clock caused by the magnetic field is less than 5.4×10-16.

Simultaneous temperature and magnetic field measurements using time-division multiplexing

Nitrogen-vacancy color centers can perform highly sensitive and spatially resolved quantum measurements of physical quantities such as magnetic field,temperature,and pressure.Meanwhile,sensing so many variables at the same time often introduces additional noise,causing a reduced accuracy.Here,a dual-microwave time-division multiplexing protocol is used in conjunction with a lock-in amplifier in order to decouple temperature from the magnetic field and vice versa.In this protocol,dual-frequency driving and frequency modulation are used to measure the magnetic and temperature field simultaneously in real time.The sensitivity of our system is about 3.4 nT=√Hz p and 1.3 mK=√Hz p,respectively.Our detection protocol not only enables multifunctional quantum sensing,but also extends more practical applications.

On all-propulsion design of integrated orbit and attitude control for inner-formation gravity field measurement satellite

The inner-formation gravity field measurement satellite （IFS） is a novel pure gravitational orbiter. It aims to measure the Earth＇s gravity field with unprecedented accuracy and spatial resolution by means of precise orbit determination （POD） and relative state measurement. One of the key factors determining the measurement level is the outer-satellite control used for keeping the inner-satellite flying in a pure gravitational orbit stably. In this paper the integrated orbit and attitude control of IFS during steady-state phase was investigated using only thrusters. A six degree-of-freedom translational and rotational dynamics model was constructed considering nonlinearity resulted from quaternion expression and coupling induced by community thrusters. A feasible quadratic optimization model was established for the integrated orbit and attitude control using con- strained nonlinear model predictive control （CNMPC） techniques. Simulation experiment demonstrated that the presented CNMPC aigorithm can achieve rapid calculation and overcome the non-convexity of partial constraints. The thruster layout is rational with low thrust consumption, and the mission requirements of IFS are fully satisfied.