Innovative pre-concentration technology for recovering ultrafine ilmenite using superconducting high gradient magnetic separator

To achieve the utilization of the abandoned ultrafine ilmenite(-20 μm) produced in the titanium magnetite processing plant in Panzhihua,the superconducting high-gradient magnetic separation(SMS) technology was proposed in this study.After optimizing the conditions of magnetic intensity,feeding and pulsation,an SMS concentrate with TiO_(2) grade of 16.03% and TiO_(2) recovery of 66.39% was obtained through one roughing-one cleaning pre-concentration flowsheet.The specific magnetic force and magnetic force were calculated and analysed to illustrate the pre-concentration mechanism,and the results revealed that the combination of high magnetic field and strong pulsating resulted in the effective preconcentration of the ultrafine ilmenite in the SMS process.In addition,the magnetic force analysis indicated that the high magnetic intensity and high magnetic gradient are the key factors of the SMS technology.Furthermore,the EDS-Mapping detection certified that the ultrafine ilmenite was concentrated from the gangue minerals using SMS technology.

Removing Iron by Magnetic Separation from a Potash Feldspar Ore

A new permanent magnetic separator was introduced to treat the ores with the characteristics of weak magnetic iron minerals and in a fine size range. The new machine was applied to the iron removal from potash feldspar. The effects of the magnetic field intensity, pulp density and grinding fineness on the iron removal were investigated. The optimized operation parameters were achieved and listed as follows： the -0.074 mm content is 85%, the pulp density is 45% and the magnetic field strength is 2T. A close test of middles regrinding was also carried out to improve concentrate yield. The data show that the grade of TFe（total iron） in potash feldspar product decreased from 1.31% to 0.21% and the concentrate yield reached 85.32%. All the results indicated that the traditonal high-intensity electromagnetic separators can be betterly substituted by the new permanent magnetic separator. This study may provide the theoretical evidence for iron removal from potash feldspar.

Study on Optimizing High-Gradient Magnetic Separation—Part 1: Improvement of Magnetic Particle Retention Based on CFD Simulations

The introduction of functionalized magnetizable particles for the purification of enzymes or for the multi-use of pre-immobilized biocatalysts offers a great potential for time and cost savings in biotechnological process design. The selective separation of the magnetizable particles is performed for example by a high-gradient magnetic separator. In this study FEM and CFD simulations of the magnetic field and the fluid flow field within a filter chamber of a magnetic separator were carried out, to find an optimal separator design. The motion of virtual magnetizable particles was calculated with a one-way coupled Lagrangian approach in order to test many geometric and parametric variations in reduced time. It was found that a flow homogenisator smoothed the fluid flow, so that the linear velocity became nearly equal over the cross section in the direction of flow. Furthermore the retention of magnetizable particles increases with a high total edge length within the filter matrix.

Recovery of iron from high phosphorus oolitic iron ore using coal-based reduction followed by magnetic separation

Oolitic iron ore is one of the most important iron resources. This paper reports the recovery of iron from high phosphorus oolitic iron ore using coal-based reduction and magnetic separation. The influences of reduction temperature, reduction time, C/O mole ratio, and CaO content on the metallization degree and iron recovery were investigated in detail. Experimental results show that reduced products with the metallization degree of 95.82% could be produced under the optimal conditions （i.e., reduction temperature, 1250℃; reduction time, 50 min; C/O mole ratio, 2.0; and CaO content, 10wt%）. The magnetic concentrate containing 89.63wt% Fe with the iron recovery of 96.21% was obtained. According to the mineralogical and morphologic analysis, the iron minerals had been reduced and iron was mainly enriched into the metallic iron phase embedded in the slag matrix in the form of spherical particles. Apatite was also reduced to phosphorus, which partially migrated into the metallic iron phase.

Recovery of iron from copper slag by deep reduction and magnetic beneficiation

Aiming at recovering iron from high-iron-content copper slag, this article introduced a combination technol- ogy of deep reduction and magnetic beneficiation, investigated the iron recovery efficiency and optimized the technical conditions. When coke powder with 86wt% fixed carbon was used as a reductant, iron was successfully extracted from the copper slag. Under the optimized condition of the coke powder content of 14wt%, the calcium-to-silicon mass ratio （Ca/Si） of 0.2, the roasting temperature of 1300℃, the roasting time of 3 h, the grinding time of 20 min, and the magnetic field intensity of 61 kA-m-1, the iron recovery rate of the copper slag can reach 91.82%, and the extracted iron powder has an iron grade of 96.21%. With the characteristics of high iron grade and low impurity content, the extracted iron powder can be used as high-quality raw materials of weathering steel.

Metalizing reduction and magnetic separation of vanadium titano-magnetite based on hot briquetting

To achieve high efficiency utilization of Panzhihua vanadium titano-magnetite, a new process of metalizing reduction and magnetic separation based on hot briquetting is proposed, and factors that affect the cold strength of the hot-briquetting products and the efficiency of reduction and magnetic separation are successively investigated through laboratory experiments. The relevant mechanisms are elucidated on the basis of microstructural observations. Experimental results show that the optimal process parameters for hot briquetting include a hot briquetting temperature of 475°C, a carbon ratio of 1.2, ore and coal particle sizes of less than 74 μm. Additionally, with respect to metalizing reduction and magnetic separation, the rational parameters include a magnetic field intensity of 50 mT, a reduction temperature of 1350°C, a reduction time of 60 min, and a carbon ratio of 1.2. Under these above conditions, the crushing strength of the hot-briquetting agglomerates is 1480 N, and the recovery ratios of iron, vanadium, and titanium are as high as 91.19%, 61.82%, and 85.31%, respectively. The new process of metalizing reduction and magnetic separation based on hot briquetting demonstrates the evident technological advantages of high efficiency separation of iron from other valuable elements in the vanadium titano-magnetite.

Magnetic and flotation studies of banded hematite quartzite (BHQ) ore for the production of pellet grade concentrate

To identify and establish beneficiation techniques for banded hematite quartzite （BHQ） iron ore, a comprehensive research on BHQ ore treatment was carried out. The BHQ ore was assayed as 38.9wt% Fe, 42.5wt% SiO2, and 1.0wt% Al2O3. In this ore, hematite and quartz are present as the major mineral phases where goethite, martite, and magnetite are present in small amounts. The liberation of hematite particles can be enhanced to about 82% by reducing the particle size to below 63 μm. The rejection of silica particles can be obtained by magnetic and flotation separation techniques. Overall, the BHQ ore can be enriched to 65.3wt% Fe at 61.9% iron recovery. A flowsheet has been suggested for the commercial exploitation of the BHQ ore.

Effect of desliming on the magnetic separation of low-grade ferruginous manganese ore

In the present investigation, magnetic separation studies using an induced roll magnetic separator were conducted to beneficiate low-grade ferruginous manganese ore. The feed ore was assayed to contain 22.4% Mn and 35.9% SiO2, with a manganese-to-iron mass ratio （Mn：Fe ratio） of 1.6. This ore was characterized in detail using different techniques, including quantitative evaluation of minerals by scan- ning electron microscopy, which revealed that the ore is extremely siliceous in nature and that the associated gangue minerals are more or less evenly distributed in almost all of the size fractions in major proportion. Magnetic separation studies were conducted on both the as-received ore fines and the classified fines to enrich their manganese content and Mn：Fe ratio. The results indicated that the efficiency of separation for deslimed fines was better than that for the treated unclassified bulk sample. On the basis of these results, we proposed a proc- ess flow sheet for the beneficiation of low-grade manganese ore fines using a Floatex density separator as a pre-concentrator followed by two-stage magnetic separation. The overall recovery of manganese in the final product from the proposed flow sheet is 44.7% with an assay value of 45.8% and the Mn：Fe ratio of 3.1.

Preparation of ferronickel from nickel laterite via coal-based reduction followed by magnetic separation

The sticking phenomenon between molten slag and refractory is one of the crucial problems when preparing ferronickel from laterite ore using rotary hearth fulnace or rotary kiln processes. This study aims to ameliorate sticking problems by using silicon dioxide （SiO2） to adjust the melting degree of file briquette during reduction roasting. Thermodynamic analysis indicates that the melting temperature of the slag gradually increases with an increase in the SiO2 proportion （SiO2/（SiO2 ＋ A1203 ＋ MgO） mass ratio）. Experimental validations also prove that the briquette retains its original shape when the SiO2 proportion is greater than 75wt%, and sticking problems axe avoided during reduction. A ferronickel product with 8.33wt% Ni and 84.71wt% Fe was prepared via reductive roasting at 1500~C for 90 min with a SiO2 proportion of 75wt% and a C/O molar ratio of 1.0 followed by dry magnetic separation; the corresponding recoveries of Ni and Fe reached 75.70% and 77.97%, respectively. The micro stxucture and phase txmlsformation of reduced briquette reveals that the aggregation and growth of ferroinckel particles were not significantly affected after adding SiO2 to the reduction process.

Effect of reverse flotation on magnetic separation concentrates

Reverse flotation studies on magnetite samples have revealed that the use of starch as a depressant of Fe-oxides has a hydrophilic effect on the surface of Fe-bearing silicates and significantly decreases Fe in the silica-rich stream when used in combination with an amine （Lilaflot D817M）. In this study, the effect of reverse flotation on the optimization of products obtained fi＇om magnetic separation was inves- tigated. Two different magnetic samples, zones 1 and 2, were milled to 〈75 btm and then subjected to low intensity magnetic separation （LIMS）. The LIMS test conducted on the 〈75 ~m shown an upgrade of 46.40wt% Fe, 28.40wt% SiO2 and 2.61wt% MnO for zone 1 and 47.60wt% Fe, 29.17wt% SiO2 and 0.50wt% MnO for zone 2. Further milling of the ore to 〈25 ~tm resulted in a higher magnetic-rich product after magnetic separation. Reverse flotation tests were conducted on the agitated magnetic concentrate feed, and the result shows a significant upgrade of Fe compared to that obtained from the non-agitated feed. Iron concentrations greater than 69%, and SiO2 concentrations less than 2% with overall magnetite recoveries greater than 67% and 71% were obtained for zones 1 and 2, respectively.

Pretreatment study on chloridizing segregation and magnetic separation of low-grade nickel laterites

The chloridizing segregation and magnetic separation of low-grade nickel laterites from Yunnan province of China was investigated.The nickel laterites were characterized by microscopic investigations,using X-ray diffractometry(XRD)and energy dispersive spectrometry(EDS)techniques.The pellets,which were prepared with magnesium chloride and coke as chloride agent and reductant respectively,were heated to a high temperature,and the pellets after cooling were crushed for magnetic separation.A series of experiments were conducted to examine the effect of chlorinating agent dosage,reductant dosage,chloridizing temperature and chloridizing time on enrichment grade of Ni and Co.The results indicate that the four factors have significant effects on the extractions of Ni and Co.The optimum conditions are as follows:the amounts of magnesium chloride and coke are 6%and 2%,respectively,chloridizing temperature is 1 253 K,and chloridizing time is 90 min.Under the conditions,extractions of Ni and Co reach 91.5%and 82.3%,respectively.

Microwave-assisted reduction roasting–magnetic separation studies of two mineralogically different low-grade iron ores

The microwave-assisted reduction behaviours of two low-grade iron ores having a similar Fe content of 49wt%but distinctly different mineralogical and liberation characteristics were studied.Their performances in terms of the iron grade and recovery as obtained from statistically designed microwave(MW)roasting followed by low-intensity magnetic separation(LIMS)experiments were compared.At respective optimum conditions,the titano-magnetite ore(O1)could yield an iron concentrate of 62.57%Fe grade and 60.01%Fe recovery,while the goethitic ore(O2)could be upgraded to a concentrate of 64.4%Fe grade and 33.3%Fe recovery.Compared with the goethitic ore,the titanomagnetite ore responded better to MW heating.The characterization studies of the feed and roasted products obtained at different power and time conditions using X-ray diffraction,optical microscopy,vibrating-sample magnetometry,and electron-probe microanalysis explain the sequential reduction in the iron oxide phases.Finally,taking advantage of the MW absorbing character of the titano-magnetite ore,a blend of the same with the goethite-rich ore at a weight ratio of 60:40(O2:O1)was subjected to MW roasting that resulted in a concentrate of 61.57%Fe grade with a Fe recovery of 64.47%.

Testing the robustness of particle-based separation models for the magnetic separation of a complex skarn ore

Physical separation processes are best understood in terms of the behaviour of individual ore particles.Yet,while different empirical particle-based separation modelling approaches have been developed,their predictive performance has never been tested under variable process conditions.Here,we investigated the predictive performance of a state-of-the-art particle-based separation model under variable feed composition for a laboratory-scale magnetic separation of a skarn ore.Two scenarios were investigated:one in which the mass flow of the different processing streams could be measured and one in which it had to be estimated from data.In both scenarios,the predictive models were sufficiently general to predict the process outcomes of new samples of variable composition.Nevertheless,the scenario in which mass flow could be measured was4%more precise in predicting mass balances.The process behaviour of minerals present at concentrations above 0.1%by weight could be accurately predicted.Our findings indicate the potential use of this method to minimize the costs of metallurgical testwork while providing in-depth understanding of the recovery behaviour of individual ore particles.Moreover,the method may be used to establish powerful tools to forecast mineral recoveries for partly new ore types at a running mining operation.

Recovery of iron from copper tailings via low-temperature direct reduction and magnetic separation: process optimization and mineralogical study

Currently, the majority of copper tailings are not effectively developed. Worldwide, large amounts of copper tailings generated from copper production are continuously dumped, posing a potential environmental threat. Herein, the recovery of iron from copper tailings via low-temperature direct reduction and magnetic separation was conducted; process optimization was carried out, and the corresponding mineralogy was investigated. The reduction time, reduction temperature, reducing agent (coal), calcium chloride additive, grinding time, and magnetic field intensity were examined for process optimization. Mineralogical analyses of the sample, reduced pellets, and magnetic concentrate under various conditions were performed by X-ray diffraction, optical microscopy, and scanning electron microscopy-energy-dispersive X-ray spectrometry to elucidate the iron reduction and growth mechanisms. The results indicated that the optimum parameters of iron recovery include a reduction temperature of 1150A degrees C, a reduction time of 120 min, a coal dosage of 25%, a calcium chloride dosage of 2.5%, a magnetic field intensity of 100 mT, and a grinding time of 1 min. Under these conditions, the iron grade in the magnetic concentrate was greater than 90%, with an iron recovery ratio greater than 95%.

Primary beneficiation of tantalite using magnetic separation and acid leaching

Primary beneficiation was successfully performed prior to dissolution of manganotantalite （sample A） and ferrotantalite （sample C） samples obtained from two different mines in the Naquissupa area, Mozambique. Magnetic separation removed the majority of iron and titanium, whereas H2SO4 leaching removed a large portion of thorium and uranium in these samples. Analytical results indicated that 64.14wt% and 72.04wt% of the total Fe and Ti, respectively, and -2wt% each of Nb205 and Ta205 were removed from sample C （ferrotantalite） using the magnetic separation method, whereas only 9.64wt% and 8.66wt% of total Fe203 and TiO2, respectively, and -2wt% each of NbEOs and Ta2O5 were removed from sample A （manganotantalite）. A temperature of 50℃ and a leaching time of 3 h in the presence of concentrated HESOa were observed to be the most appropriate leaching conditions for removal of radioactive elements from the tantalite ores. The results obtained for sample A under these conditions indicated that 64.14wt% U3O8 and 60.77wt% ThO2 were leached into the acidic solution, along with 4.45wt% and 0.99wt% of Nb2O5 and Ta2O5, respectively.

Recovery of Ferric Oxide from Bayer Red Mud by Reduction Roasting-Magnetic Separation Process

A great amount of red mud generated from alumina production by Bayer process was considered as a low-grade iron ore with a grade of 5wt% to 30wt% iron.We adopted the reduction roastingmagnetic separation process to recover ferric oxide from red mud.The red mud samples were processed by reduction roasting,grinding and magnetic separating respectively.The effects of different parameters on the recovery rate of iron were studied in detail.The optimum techqicalparameters were proposed with 700 ℃roasting for 20 min,as 50wt% carbon and 4wt% additive were added.The experimentalresults indicated that the iron recovery and the grade of totaliron were 91% and 60%,respectively.A novelprocess is applicable to recover ferric oxide from the red mud waste fines.

Ferronickel enrichment by fine particle reduction and magnetic separation from nickel laterite ore

Ferronickel enrichment and extraction from nickel laterite ore were studied through reduction and magnetic separation. Reduction experiments were performed using hydrogen and carbon monoxide as reductants at different temperatures （700-1000℃）. Magnetic separa- tion of the reduced products was conducted using a SLon-100 cycle pulsating magnetic separator （1.2 T）. Composition analysis indicates that the nickel laterite ore contains a total iron content of 22.50wt% and a total nickel content of 1.91wt%. Its mineral composition mainly con- sists of serpentine, hortonolite, and goethite. During the reduction process, the grade of nickel and iron in the products increases with in- creasing reduction temperature. Although a higher temperature is more favorable for reduction, the temperature exceeding 1000℃ results in sintering of the products, preventing magnetic separation. After magnetic separation, the maximum total nickel and iron concentrations are 5.43wt% and 56.86wt%, and the corresponding recovery rates are 84.38% and 53.76%, respectively.

Aerobic oxidative desulfurization via magnetic mesoporous silica-supported tungsten oxide catalysts

It is usually difficult to remove dibenzothiophenes from diesel fuels by oxidation with molecular oxygen as an oxidant.In the study,tungsten oxide was supported on magnetic mesoporous silica by calcination to form a magnetically separable catalyst for oxidative desulfurization of diesel fuel.By tuning different calcining temperatures,the catalyst calcined at 500℃showed a high catalytic activity with molecular oxygen as the oxidant.Under optimal reaction conditions,the sulfur removal of DBT reached 99.9%at 120℃after 8 h.Furthermore,the removals of 4-methyldibenzothiophene and 4,6-dimethyldibenzothiophene could also get up to 98.2%and 92.3%under the same conditions.The reaction mechanism was explored by selective quenching experiments and FT-IR spectra.

Magnetic separation studies on ferruginous chromite fine to enhance Cr:Fe ratio

The Cr：Fe ratio （chromium-to-iron mass ratio） of chromite affects the production of chrome-based ferroalloys. Although the lit- erature contains numerous reports related to the magnetic separation of different minerals, limited work concerning the application of mag- netic separation to fine chromite from the Sukinda region of India to enhance its Cr：Fe ratio has been reported. In the present investigation, magnetic separation and mineralogical characterization studies of chromite fines were conducted to enhance the Cr：Fe ratio. Characterization studies included particle size and chemical analyses, X-ray diffraction analysis, automated mineral analysis, sink-and-float studies, and mag- netic susceptibility measurements, whereas magnetic separation was investigated using a rare earth drum magnetic separator, a rare earth roll magnetic separator, an induced roll magnetic separator, and a wet high-intensity magnetic separator. The fine chromite was observed to be upgraded to a Cr：Fe ratio of 2.2 with a yield of 55.7% through the use of an induced roll magnetic separator and a feed material with a Cr：Fe ratio of 1.6.

Magnetic properties of low-grade hematite ore after magnetizing reduction and reoxidation using a fluidized bed

Magnetizing roasting via a fluidized bed,which was recognized as an efficient method for beneficiation of low-grade iron ores,has attracted much attention in China recently due to the fluctuation of the international iron ore market.In order to examine the effects of magnetic properties on the separability and to optimize the operating parameters,magnetic susceptibility and coercivity of a low-grade hematite after magnetizing reduction and reoxidation under different conditions were investigated.It was found that the magnetic susceptibility of roasted ore increased with reduction degree and particle diameter to different degrees.The magnetite was re-oxidized to maghemite when the temperature was below 400℃,and the magnetic susceptibility decreased slightly.The recovery efficiency decreased notably with the particle size for very fine grains although no significant change was found in magnetic susceptibility.The coercivity and remanence of roasted ores decreased with increasing roasting temperature.The scanning electron microscope(SEM) study showed that more cracks were produced by the reoxidation of reduced ores,which could possibly favor the intergranular fracturing and the liberation for further treatment.