The magnetic flux in a permanent magnet transverse flux generator(PMTFG) is three-dimensional(3D), therefore, its efficacy is evaluated using 3D magnetic field analysis. Although the 3D finite-element method(FEM) is h...The magnetic flux in a permanent magnet transverse flux generator(PMTFG) is three-dimensional(3D), therefore, its efficacy is evaluated using 3D magnetic field analysis. Although the 3D finite-element method(FEM) is highly accurate and reliable for machine simulation, it requires a long computation time, which is crucial when it is to be used in an iterative optimization process. Therefore, an alternative to 3DFEM is required as a rapid and accurate analytical technique. This paper presents an analytical model for PMTFG analysis using winding function method. To obtain the air gap MMF distribution, the excitation magneto-motive force(MMF) and the turn function are determined based on certain assumptions. The magnetizing inductance, flux density, and back-electro-magnetomotive force of the winding are then determined. To assess the accuracy of the proposed method, the analytically calculated parameters of the generator are compared to those obtained by a 3D-FEM. The presented method requires significantly shorter computation time than the 3D-FEM with comparable accuracy.展开更多
The design requirement and principle of the deflection magnet for Magnetron and Penning H^- ion source are discussed. It is proved that there exists a maximum emittance for the beam that may be transformed by the magn...The design requirement and principle of the deflection magnet for Magnetron and Penning H^- ion source are discussed. It is proved that there exists a maximum emittance for the beam that may be transformed by the magnet into a state with equal Twiss parameters of αr=αy and βr =βr=βy, which is the requisite condition to get a minimum emittance at the entrance of RFQ after transporting by a LEBT with solenoids. For this maximum emittance, the corresponding magnetic field gradient index is 1.展开更多
文摘The magnetic flux in a permanent magnet transverse flux generator(PMTFG) is three-dimensional(3D), therefore, its efficacy is evaluated using 3D magnetic field analysis. Although the 3D finite-element method(FEM) is highly accurate and reliable for machine simulation, it requires a long computation time, which is crucial when it is to be used in an iterative optimization process. Therefore, an alternative to 3DFEM is required as a rapid and accurate analytical technique. This paper presents an analytical model for PMTFG analysis using winding function method. To obtain the air gap MMF distribution, the excitation magneto-motive force(MMF) and the turn function are determined based on certain assumptions. The magnetizing inductance, flux density, and back-electro-magnetomotive force of the winding are then determined. To assess the accuracy of the proposed method, the analytically calculated parameters of the generator are compared to those obtained by a 3D-FEM. The presented method requires significantly shorter computation time than the 3D-FEM with comparable accuracy.
文摘The design requirement and principle of the deflection magnet for Magnetron and Penning H^- ion source are discussed. It is proved that there exists a maximum emittance for the beam that may be transformed by the magnet into a state with equal Twiss parameters of αr=αy and βr =βr=βy, which is the requisite condition to get a minimum emittance at the entrance of RFQ after transporting by a LEBT with solenoids. For this maximum emittance, the corresponding magnetic field gradient index is 1.
