Nonreciprocal transmission of electromagnetic waves by three-layer magneto-optical mediums

We investigate the non-reciprocal transmission properties of a three-layer structure filled with magneto–optical medium and normal medium. Based on the transfer matrix method, we deduce the total transmission coefficient for a one-dimensional(1 D) structure with anisotropic mediums. When two-side layers with magneto–optical medium loaded in opposite external magnetic field, the time-reversal symmetry of transmission properties will be broken. Our numerical results show that the non-reciprocal transmission properties are influenced by external magnetic fields, incident angle, and thickness of the normal medium layer. Since the non-reciprocal properties can be easily realized and adjusted by the simple structure, such a design has potential applications in integrated circulators and isolators.

Intense source of cold cesium atoms based on a two-dimensional magneto–optical trap with independent axial cooling and pushing

We report our studies on an intense source of cold cesium atoms based on a two-dimensional（2D） magneto–optical trap（MOT） with independent axial cooling and pushing.The new-designed source,proposed as 2D-HP MOT,uses hollow laser beams for axial cooling and a thin pushing laser beam to extract a cold atomic beam.With the independent pushing beam,the atomic flux can be substantially optimized.The total atomic flux maximum obtained in the 2D-HP MOT is4.02 × 1010atoms/s,increased by 60 percent compared to the traditional 2D＋MOT in our experiment.Moreover,with the pushing power 10 μW and detuning 0Γ,the 2D-HP MOT can generate a rather intense atomic beam with the concomitant light shift suppressed by a factor of 20.The axial velocity distribution of the cold cesium beams centers at 6.8 m/s with an FMHW of about 2.8 m/s.The dependences of the atomic flux on the pushing power and detuning are studied in detail.The experimental results are in good agreement with the theoretical model.

Optimization of a magneto–optic trap using nanofibers

We experimentally demonstrate a reliable method based on a nanofiber to optimize the number of cold atoms in a magneto–optical trap(MOT) and to monitor the MOT in real time.The atomic fluorescence is collected by a nanofiber with subwavelength diameter of about 400 nm.The MOT parameters are experimentally adjusted in order to match the maximum number of cold atoms provided by the fluorescence collected by the nanofiber.The maximum number of cold atoms is obtained when the intensities of the cooling and re-pumping beams are about 23.5 mW/cm^2 and 7.1 mW/cm^2,respectively;the detuning of the cooling beam is-13.0 MHz, and the axial magnetic gradient is about 9.7 Gauss/cm.We observe a maximum photon counting rate of nearly(4.5 ± 0.1)× 10^5 counts/s.The nanofiber–atom system can provide a powerful and flexible tool for sensitive atom detection and for monitoring atom–matter coupling.It can be widely used from quantum optics to quantum precision measurement.

Coherent population trapping magnetometer by differential detecting magneto–optic rotation effect

A pocket coherent population trapping（CPT） atomic magnetometer scheme that uses a vertical cavity surface emitting laser as a light source is proposed and experimentally investigated.Using the differential detecting magneto–optic rotation effect,a CPT spectrum with the background canceled and a high signal-to-noise ratio is obtained.The experimental results reveal that the sensitivity of the proposed scheme can be improved by half an order,and the ability to detect weak magnetic fields is extended one-fold.Therefore,the proposed scheme is suited to realize a pocket-size CPT magnetometer.

YbBi:YIG石榴石单晶的磁光性能及其光纤电流传感器应用

Magneto optic(MO) fiber current sensors utility the Faraday effect of magneto op tic materials to sensing the magnetic(current)fields.The optical fiber sensors(O FS)offer great advantages of simple structure,high reliability,high accuracy and sensibility,immunity to electromagnetic interference.They are the most promised method to substitute the conventional current transducers(CTs),much attentions were focused on both domestic and abroad.Magneto optic properties of Faraday se n sing element have much affect on the performance of the optical fiber current se nsor.For used in the sensor system,MO materials with magneto optic characterist i cs of large Faraday rotation(FR)angle θ f ,low temperature sensibility,and suitable saturation field were general demanded. Development of MO materials is one of the most important problems of optical fiber current sensor research. In this paper,one mixed doped Bi substituted yttrium iron garnet crystal BiYb:Y I G, which has large and temperature stable FR angle,was grown from high temperatu re flux.By taking PbO+PbF 2 as the main flux,under the compositions of molar ra tio Y 2O 3:Yb 2O 3:Bi 2O 3:Fe 2O 3:(PbO+PbF 2+B 2O 3+CaCO 3)=7.64:1. 04:1.74:20.78:78:68.8,crystals of quite good quality were grown from melt flux,t he largest one has the size of 22mm×15mm×12mm.Magneto optic proprieties of Fa raday rotation angle and optical absorption spectrum of the BiYb:YIG crystal,expecial ly Y 2.289 Yb 0.246 Bi 0.465 Fe 5O 12 ,in the range of 0.7 1.9 μm waveband were measured.At λ =1.55μm,the BiYb:YIG crystal has special Fa raday rotation angle of -404deg/cm,temperature coefficient 4.2×10 -6 K -1 ,optical absorption coefficient 3.6cm -1 ,and figure of merit 25.8deg/dB . The results indicate that substituted with Bi 3+ can largely improve the Fa raday rotation of rear earth iron garnets.Because Faraday rotation angles of Yb 3Fe 5O 12 and Y 3Fe 5O 12 have opposite temperature dependency,ut ility the compensation effect of mix doped,co doped with some other ions,such a s Yb 3+ ,would decrease the temperature dependency of Bi substituted garnet. So the garnet crystal BiYb:YIG has high and temperature stable Faraday rotation an gle,very suitable to be used as Faraday effect materials for high sensibility an d temperature stable Optical fiber current sensors.Using BiYb:YIG as Faraday rot ation cell,a hybrid bulk crystal optical fiber current sensor was proposed and t ests under direct current(DC) and 50Hz alternating current(AC).The performance c haracteristics of the sensors system were:DC measurement,sensibility 0.01A, l inea rity 1.1%;AC measurement,sensibility 9.5A/mV ,accuracy ±1%,linearity 1.1%,dynam ic range 40dB.In conclusion,Faraday effect magneto optic optical fiber current sensors have higher sensibility and accuracy than conventional CTs.

Extending the trapping lifetime of single atom in a microscopic far-off-resonance optical dipole trap

In our experiment, a single cesium atom prepared in a large-magnetic-gradient magneto optical trap （MOT） can be efficiently transferred into a 1064-nm far-off-resonance microscopic optical dipole trap （FORT）. The efficient transfer of the single atom between the two traps is used to determine the trapping lifetime and the effective temperature of the single atom in FORT. The typical trapping lifetime has been improved from ~ 6.9 s to ~ 130 s by decreasing the background pressure from 1 × 10^-10 Torr to ~ 2 × 10^-11 Torr and applying one-shot 10-ms laser cooling phase. We also theoretically investigate the dependence of trapping lifetimes of a single atom in a FORT on trap parameters based on the FORT beam＇s intensity noise induced heating. Numerical simulations show that the heating depends on the FORT beam＇s waist size and the trap depth. The trapping time can be predicted based on effective temperature measurement of a single atom in the FORT and the intensity noise spectra of the FORT beam. These experimental results are found to be in agreement with the predictions of the heating model.