Expert Experience and Data-Driven Based Hybrid Fault Diagnosis for High-SpeedWire Rod Finishing Mills

The reliable operation of high-speed wire rod finishing mills is crucial in the steel production enterprise.As complex system-level equipment,it is difficult for high-speed wire rod finishing mills to realize fault location and real-time monitoring.To solve the above problems,an expert experience and data-driven-based hybrid fault diagnosis method for high-speed wire rod finishing mills is proposed in this paper.First,based on its mechanical structure,time and frequency domain analysis are improved in fault feature extraction.The approach of combining virtual value,peak value with kurtosis value index,is adopted in time domain analysis.Speed adjustment and side frequency analysis are proposed in frequency domain analysis to obtain accurate component characteristic frequency and its corresponding sideband.Then,according to time and frequency domain characteristics,fault location based on expert experience is proposed to get an accurate fault result.Finally,the proposed method is implemented in the equipment intelligent diagnosis system.By taking an equipment fault on site,for example,the effectiveness of the proposed method is illustrated in the system.

Synthesis and Characterization of Nonionic Waterborne Polyurethane and Application to Wool Fabric Finishing

A nonionic waterborne polyurethane(WPU) was synthesized by the self-emulsification method using polyether diol(N220),isophorone diisocyanate(IPDI),trimethylolpropane poly(ethylene glycol monomethyl ether)(N120),1,4-butanediol(BDO) and trimethylolpropane(TMP) as the main materials.The effects of the NCO/OH ratio on the emulsion and film properties of NWPU were explored.The experimental results show that the NWPU prepared at an NCO/OH ratio of 1.1 has good emulsion stability and easy film formation,and the resultant film was elastic,soft,and transparent.The sample was used for wool finishing and the application performance was evaluated.When the NWPU dosage reached 40 g·L^(-1),the fabric area felt shrinkage rate reduced from 8.97% to 4.75%,the pilling rating raised from grade 2-3 to grade 4,and the whiteness value only decreased by 3.87%.

Textile industry innovations in dyeing and finishing processes:Minimizing environmental impact

Textiles are one of the oldest industries in the world which has been manufacturing fabrics and materials needed for various purposes.However,the industry has been confronted with some problems regarding its pollution;specifically the dyeing and finishing processes.As for the given issues,there has been a trend in recent years to come up with more environmentally friendly solutions.

Finishing first with Monforts at Techtextil 2024

Monforts–which celebrates its 140th anniversary this year–continues to lead the field in finishing and coating technologies for technical textiles.The company is looking forward to many fruitful discussions on the scope of existing and new processes and applications at the forthcoming Techtextil show in Frankfurt from April 23-26.

Optimization of Finishing Process and Energy Savings in Denim Textile Facility

Denim is widely accepted among exported textile products due to its aesthetics, appearance, and fashion. Practitioners employed several physical or chemical treatments to improve denim qualities in denim finishing operations. So, several treatment processes, including enzymatic, bleaching, singeing, heat set, and ozone finish, are used, which made this processing more energy consumption and time-consuming. Therefore, it is significant to investigate how changing the chemicals and raw ingredients could improve the finishing process, which is environmentally and economically beneficial for sustainable production practices in the denim finishing process. This study’s research design comprises an experimental investigation in a denim plant in Bangladesh. Two different fabrics were chosen to analyze, determining the potential savings of finishing on the denim fabrics’ performance characteristics. By deducting singeing and heat-set processes, the researchers ran an experimental process by maintaining the same length of fabric. Then, the impacts of finishing process optimization on the mechanical, thermal, and comfort parameters of drape, stiffness, and tear strength were examined. The study’s findings demonstrated that this experiment increased productivity and reduced the finishing unit’s energy consumption without compromising the denim fabrics’ quality. This study significantly impacts environmental sustainability by preserving limited energy resources and manufacturing denim finishing processes.

Jeanologia reduces water consumption from 100 to 1 liter in garment finishing

Since 1994 the mission of Jeanologia has been to create an ethical,sustainable and eco-efficient industry,marking a new era through sustainability,digitalization and automation.The company is leading the transforma­tion of the industry with its disruptive technologies:laser,G2 ozone,e-Flow,SmartBoxes,Colorbox and H2 Zero,ca­pable of increasing productivity,reducing costs,water and energy consumption,and eliminating harmful emissions and discharges,guaranteeing zero pollution.

Knit Excellence from Goller is well-suited to all wet finishing treatments

The Knit Excellence package includes a full range of machinery for the complete treatment of knitted fabrics–Knit Complexa for bleaching,Knit Mercer for mercerisation,Knit Economica for dyeing and the versatile Sintensa washing concepts for washing after dyeing and printing.

Epiphanic Revival: Exploring Metallic Finishes on Batik Fabrics in Ghana

Batik fabric is an integral part of the traditional cloth culture of the Ghanaian traditional setting. However, the batik fabric has marginal usage due to its casual visual appearance. This studio practice seeks to explore the epiphanic revival in the use of metallic finishes on batik substrate to create an enhanced visual appearance with embellished aesthetic sensibilities and diversified use. The researchers adopted the studio-based approach of the qualitative design to manipulate handmade tools, techniques (collagraph) and the batik fabrics through experimentation to produce a glittering mercurial batik fabric which is typically an industrial practice. The studio practice took place at the Textile Design and Technology studio, Takoradi Technical University, Ghana. The traditional batik fabric was manipulated through fabric decoration techniques in accordance with studio-based practices. The Addie model was adopted as a methodological approach in the analysis, design, development, implementation, and evaluation processes of the experimentation processes of the study. Findings revealed that the hand techniques used in the production process for the metallic prints produced interesting accidentals finishes and effects that machine work cannot achieve, producing new discoveries of visual enhancements of traditional batik fabric. Traditional batiks became mercurial with glittery effects. The metallic prints on the fabric also changed its consumption pattern from mere casual fabric to classic and cosmopolitan fabric for varied uses suitable for wearable to non-wearable.

Construction Cost Control Strategy of Finished House Based on BIM-5D

Building Information Modeling(BIM)technology can not only achieve project refinement management of the construction process based on a 3D model but also form a BIM-5D model based on the fusion of progress data and cost data to achieve the dynamic control of the whole process of project cost.This paper discusses the application of BIM-5D in the cost control of finished house construction,aiming to provide technical reference for China’s finished house project units,so that they can master how to realize the construction of cost control system based on BIM,the monitoring of the key coefficients of the cost,corrective action,to ensure that the project cost deviation is within the controllable range,and to make an effective guarantee for the economic benefits of the project construction.

Effect of the Inclusion of Chestnut in the Finishing Diet on Volatile Compounds of Dry-Cured Ham from Celta Pig Breed

The effect of the inclusion of chestnut in pigs ifnishing diet on volatile compounds of dry-cured Celta ham was studied. Twelve hams of each type （from three different pigs ifnishing diets：concentrate （CO）, mixed （MI） and chestnut （CH）） were used. Volatiles were extracted using a purge-and-trap method and analyzed by gas chromatography/mass spectrometry （GC/MS）. Thirty-nine volatile compounds were identified in dry-cured Celta ham samples. Most abundant volatiles in ham samples were aldehydes, which represented respectively, 53% （CO）, 51% （MI） and 46% （CH） of the total volatile composition. With the exception of 2-butenal, 2-methyl, all aldehydes were affected by feeding system. On the other hand, hydrocarbons n-alkanes were the second major group in the volatile proifle of dry-cured Celta hams and represented 28.9, 35.7 and 32.4%of the total volatile composition for CO, MI and CH groups, respectively. Ham samples from chestnut group showed a higher content of alcohols and this result could be related with the inclusion of chestnut in the ifnishing diet of pigs. Principal component analysis showed a good separation among groups. The discriminant analysis selected eight variables （butanoic acid, hexanal, octanal, nonenal （E）, decenal （E）, tetradecane, decane trimethyl and pyridine 2-methyl） and calculated two discriminating functions to predict if chestnut has been included in the ifnishing diet. Thus, it was possible to discriminate between groups fed with ifnishing diets containing chestnuts in their composition （mixed and chestnut group）.

Hermetia illucens larvae as a potential dietary protein source altered the microbiota and modulated mucosal immune status in the colon of finishing pigs

Background: Insects, such as Hermetia illucens larvae, are rich in chitin and proteins, and represent a suitable feed ingredient replacement for animals. However, little is known about the effect of administering H. illucens larvae on intestinal microbiota, bacterial metabolite profiles, and mucosal immune status in animals. This study aimed to investigate the effects of administering H. illucens larvae on colonic microbiota and bacterial metabolites production in finishing pigs. Seventy-two crossbred(Duroc × Landrace × Large White) female pigs(initial body weight, 76.0 ± 0.52 kg) were randomly allocated to three different dietary treatments: a control diet(Control group) and two diets corresponding to 4%(H1 group) and 8%(H2 group) H. illucens larvae inclusion levels, respectively. Each treatment consisted of eight pens(replicates), with three pigs per pen. After 46 days of feeding, eight pigs per treatment(n =8) were slaughtered, and the colonic digesta and mucosa were collected for microbial composition and microbial fermentation products, and genes expression analyses.Results: The results showed that the H1 diet significantly increased the abundance of Lactobacillus,Pseudobutyrivibrio, Roseburia, and Faecalibacterium compared with those in the control group(P < 0.05), with a decrease in the abundance of Streptococcus. The numbers of Lactobacillus, Roseburia, and Clostridium cluster XIVa were significantly greater in the H1 group than in the control group(P < 0.05). Meanwhile, H2 diet increased the number of Clostridium cluster XIVa compared with the control group(P < 0.05). For colonic metabolites, total short chain fatty acids, butyrate, and isobutyrate concentrations were significantly higher in the H1 group than those in the control group(P < 0.05);the H1 treatment caused a striking decrease in protein fermentation compared with the control group, as the concentrations of total amines, cadaverine, tryptamine, phenol, p-cresol, and skatole were significantly lower(P < 0.05). Additionally, H2 diet also increased butyrate concentration compared with control group(P < 0.05), while decreased the concentrations of phenol, p-cresol, and skatole(P < 0.05). Pigs in the H1 group down-regulated the expression of TLR-4 and pro-inflammatory cytokines(IFN-γ) compared with pigs in the control group(P < 0.05), and up-regulated anti-inflammatory cytokine(IL-10) and intestinal barrier genes(ZO-1, occludin, and mucin-1). H2 diet up-regulated the expression of ZO-1 compared with control group(P < 0.05). Furthermore, the changes in the colonic mucosal gene expression were associated with changes in the bacterial composition and their metabolites.Conclusions: Collectively, dietary inclusion of Hermetia illucens larvae may enhance mucosal immune homeostasis of pigs via altering bacterial composition and their metabolites. These findings provide a new perspective on insect meal as a sustainable protein source rich in nutrient ingredients for swine.

Machining the Integral Impeller and Blisk of Aero-Engines:A Review of Surface Finishing and Strengthening Technologies

The integral impeller and blisk of an aero-engine are high performance parts with complex structure and made of difficult-to-cut materials. The blade surfaces of the integral impeller and blisk are functional surfaces for power transmission, and their surface integrity has signif- icant effects on the aerodynamic efficiency and service life of an aero-engine. Thus, it is indispensable to finish and strengthen the blades before use. This paper presents a comprehensive literature review of studies on finishing and strengthening technologies for the impeller and blisk of aero-engines. The review includes independent and inte- grated finishing and strengthening technologies and dis- cusses advanced rotational abrasive flow machining with back-pressure used for finishing the integral impeller and blisk. A brief assessment of future research problems and directions is also presented.

Studies on Reducing Nitrogen Excretion: Ⅰ. Net Energy Requirement of Finishing Pigs Maximizing Performance and Carcass Quality Fed Low Crude Protein Diets Supplemented with Crystalline Amino Acids

Two experiments were conducted to in- vestigate the effects of net energy （NE） level on the performance and carcass traits of finishing pigs fed low crude protein （CP） diets supplemented with crystalline amino acids （CAA）. A total of 216 （Exp. 1） and 360 （Exp. 2 ） barrows （ Yorkshire × Landrace× Duroc ） were allotted to one of six treatments （n =6）. The experimental diets were based on corn and soybean meal, and consisted of a high-CP diet that contained approximately 16% CP and 2.50 Mcal/kg of NE as well as five low-CP diets in which the CP level of the diet was reduced by approximately four percentage units but was supplemented with crystalline lysine, methionine, threonine, and tryptophan. The low CP diets provided 2.64, 2.58, 2.50, 2.42, or 2.36 Mcal/kg in Exp. 1 as well as 2.45, 2.40, 2.35, 2.30, or 2.25 Mcai/kg in Exp.2. In Exp. 1, a linear （P=0.03） increase in weight gain was observed with decreasing NE level while the ratio of gain to feed was unaffect- ed （P 〉 0.05） by NE level. There was a linear in-crease （P = 0.01 ） in the percentage of fat-free lean and a linear decrease （ P = 0.03 ） in the percentage of total fat with decreasing NE levels. In Exp. 2, a sig- nificant quadratic （ P = 0.03 ） effect of NE level was observed for weight gain. The ratio of gain to feed demonstrated a significant （P 〈0.01 ） quadratic effect with pigs fed 2.35 and 2.40 Mcal/kg of NE, Pigs fed the diet containing 2.40 Mcal/kg of NE had the lowest percentage of total fat （36. 95% ） and the highest percentage of fat-free lean （49.36%）. The overall results of these experiments indicate that feed- ing either a surplus or a deficiency of NE is detrimen- tal to both pig performance and carcass composition when low CP diets supplemented with CAA are fed. Our results indicate that when the CP content of the diet is reduced by four percentage units and the diet is properly supplemented with CAA, maximum per- formance and carcass quality will be obtained if the diet provides approximately 2.42 Mcal/kg of NE.

Supplementation of different fat sources affects growth performance and carcass composition of finishing pigs

Background: There are various fat sources with different energy values and fatty acid compositions that may affect growth performance and carcass composition of grow-finishing pigs. A higher net energy was recently reported in choice white grease compared with soybean oil. Therefore, two experiments were conducted to determine whether practical responses confirm that difference between choice white grease and soybean oil, and to extend the observations to other fat sources.Results: In Exp. 1, pigs fed fats had lower(P < 0.05) average daily feed intake in phase II and overall period,greater(P < 0.05) gain:feed in phase I, phase II, and overall period than pigs fed the control diet. Pigs fed fats tended(P = 0.057) to have thicker backfat depth at the last rib than those fed control. Pigs fed 6% fats had greater(P < 0.01) gain:feed in phase II and overall period than pigs fed 3% fats. During phase I, pigs fed choice white grease grew faster(P < 0.05) than pigs fed soybean oil. In Exp. 2, pigs fed dietary fats(soybean oil, choice white grease, animal-vegetable blend, palm oil, or tallow) had greater(P < 0.01) gain:feed in each phase and overall period, greater(P < 0.01) average daily gain in phase I, but lower(P < 0.01) average daily feed intake in phase II an overall than pigs fed the control diets. The choice white grease also increased(P < 0.05) average daily gain during phase I compared with soybean oil. Pigs fed palm oil had thicker(P < 0.05) backfat depth at the 10 thrib than those fed soybean oil, animal-vegetable blend, or tallow.Conclusions: Inclusion of 6% dietary fat improved feed efficiency of finishing pigs, while different fats produced different practical results that may be consistent with their different energy values. Results from the early stage indicate that dietary fats with relatively more saturated fatty acids may provide greater energy than those with relatively more unsaturated fatty acids for growing pigs.

Magnetorheological finishing of an irregular-shaped small-bore complex component using a small ball-end permanent-magnet polishing head

A novel magnetorheological finishing(MRF)process using a small ball-end permanent-magnet polishing head is proposed,and a four-axes linkage dedicated MRF machine tool is fabricated to achieve the nanofinishing of an irregularψ-shaped small-bore complex component with concave surfaces of a curvature radius less than3 mm.The processing method of the complex component is introduced.Magnetostatic simulation during the entire finishing path is carried out to analyze the material removal characteristics.A typicalψ-shaped small-bore complex component is polished on the developed device,and a fine surface quality is obtained with surface roughness Raof 0.0107μm and surface accuracy of the finished spherical surfaces of 0.3320μm(PV).These findings indicate that the proposed MRF process can perform the nanofinishing of a kind of small-bore complex component with small-curvature-radius concave surfaces.

Effects of organic chromium supplementation to finishing lambs diet on growth performance, carcass characteristics and meat quality

The objective of this study was to evaluate supplemental organic chromium（Cr） to finishing lambs on growth performance, carcass characteristics, and meat quality. Eighteen Suffolk lambs（age（4.5±0.2） mon;（25.8±3.6） kg body weight（BW）） were randomly assigned to three levels of supplemental organic Cr（0.0, 0.2 and 0.4 mg kg^–1 dry matter（DM）） in a complete random design. Growth performance was evaluated for 70 d, and then lambs were slaughtered to study carcass characteristics and chemical composition of meat. Orthogonal contrasts were performed（contrast one-average level 0.2 ppm Cr vs. average level 0.4 ppm Cr; contrast two-level 0 vs. average levels（0.2＋0.4） ppm Cr）. Orthogonal polynomials were used to estimate the linear and quadratic effects of Cr concentrations. Growth and carcass performance were not affected by supplemental organic Cr. Muscle conformation and leg perimeter linearly increased（P〈0.05） as organic Cr level increased in the diet. Kidney fat decreased linearly（P〈0.05） as supplemental Cr increased. In Longissimus dorsi（LD）, the ash content decreased linearly, and shear force（kg cm^–2） increased（P〈0.05） as organic Cr level increased in the diet. It is concluded that organic Cr did not affect growth performance, but it improved positively the muscle conformation, reduced kidney fat, whereas in LD there was an increment in shear force in finishing carcass lambs.

New Iron-based SiC Spherical Composite Magnetic Abrasive for Magnetic Abrasive Finishing

SiC magnetic abrasive is used to polish surfaces of precise, complex parts which are hard, brittle and highly corrosion-resistant in magnetic abrasive finishing（MAF）. Various techniques are employed to produce this magnetic abrasive, but few can meet production demands because they are usually time-consuming, complex with high cost, and the magnetic abrasives made by these techniques have irregular shape and low bonding strength that result in low processing efficiency and shorter service life. Therefore, an attempt is made by combining gas atomization and rapid solidification to fabricate a new iron-based SiC spherical composite magnetic abrasive. The experimental system to prepare this new magnetic abrasive is constructed according to the characteristics of gas atomization and rapid solidification process and the performance requirements of magnetic abrasive. The new iron-based SiC spherical composite magnetic abrasive is prepared successfully when the machining parameters and the composition proportion of the raw materials are controlled properly. Its morphology, microstructure, phase composition are characterized by scanning electron microscope（SEM） and X-ray diffraction（XRD） analysis. The MAF tests on plate of mold steel S136 are carried out without grinding lubricant to assess the finishing performance and service life of this new SiC magnetic abrasive. The surface roughness（Ra） of the plate worked is rapidly reduced to 0.051 μm from an initial value of 0.372 μm within 5 min. The MAF test is carried on to find that the service life of this new SiC magnetic abrasive reaches to 155 min. The results indicate that this process presented is feasible to prepare the new SiC magnetic abrasive; and compared with previous magnetic abrasives, the new SiC spherical composite magnetic abrasive has excellent finishing performance, high processing efficiency and longer service life. The presented method to fabricate magnetic abrasive through gas atomization and rapid solidification presented can significantly improve the finishing performance and service life of magnetic abrasive, and provide a more practical approach for large-scale industrial production of magnetic abrasive.

Online application of automatic surface quality inspection system to finishing line of cold rolled strips

An automatic surface quality inspection system installed on a finishing lineof cold rolled strips is introduced. The system is able to detect surface defects on cold rolledstrips, such as scratches, coil breaks, rusts, roll imprints, and so on. Multiple CCD area scancameras were equipped to capture images of strip surface simultaneously. Defects were detectedthrough 'Dark-field illumination' which is generated by LED illuminators. Parallel computationtechnique and fast processing algorithms were developed for real-time data processing. Theapplication to the production line shows that the system is able to detect defects effectively.

FINITE ELEMENT ANALYSIS FOR MICROSTRUCTURE EVOLUTION IN HOT FINISHING ROLLING OF STEEL STRIPS

A computer model that describes the evolution of microstructures during the hot finishing rolling of SS400 steel has been proposed. It has been found that the microstructure strongly depends on processing of materials and on their parameters, which affected the history of the thermomechanical variables, such as temperature, strain, and strain rate. To investigate the microstructural evolutions during the hot finishing rolling process, the rigid-thermoviscoplastic finite element method （FEM） has been combined with dynamic recrystallization, static recrystallization, and grain growth models. The simulation results show a good agreement with those from the prediction software online.

Different dietary starch sources alter the carcass traits, meat quality, and the profile of muscle amino acid and fatty acid in finishing pigs

Background: With increasing health awareness among consumers, the demand for healthier, tastier, higher quality and nutritional value pork is increasing. It has been shown that different dietary starch sources can alter the carcass traits and meat quality. However, research on the effects of different starch sources with clear different amylose/amylopectin ratio on the amino acid and fatty acid composition in Longissimus thoracis(L. thoracis) muscle of pigs is limited. This study aimed to investigate the effects of different dietary starch sources on carcass traits, meat quality, muscle amino acid and fatty acid composition, and the mRNA expression levels of genes involved in lipid metabolism and muscle fiber characteristics in finishing pigs. A total of 72 Duroc × Landrace × Large White barrows were randomly allocated to 3 different dietary treatment groups with 8 replicate pens/group and 3 pigs per pen.Tapioca starch(TS), corn starch(CS), and pea starch(PS), with amylose/amylopectin ratio of 0.11, 0.25, and 0.44,respectively, were used as their dietary starch sources for 40 days.Results: Results showed that the PS diet significantly increased(P < 0.05) the final body weight, average daily gain,loin-eye area, and fat-free lean index compared with the TS diet, but significantly decreased(P < 0.05) the feed to gain ratio and backfat thickness. Compared with the TS diet, PS diet also increased(P < 0.05) the pH45 min, marbling scores, the content of intramuscular fat and inosine monophosphate in the L. thoracis, and decreased(P < 0.05) the drip loss and shear force. In addition, compared with the TS diet, PS diet increased(P < 0.05) the proportions of flavor amino acids, DHA, EPA, and n-3 polyunsaturated fatty acid(PUFA) in the L. thoracis compared with TS diet,but decreased(P < 0.05) the ratio of n-6/n-3 PUFA. Furthermore, compared with the TS diet, PS diet also upregulated(P < 0.05) the lipogenic genes(FAS, LPL, SCD, ACCα) and myosin heavy-chain(MyHC)-IIa mRNA expression levels compared with the TS diet, but downregulated(P < 0.05) the CPT1 B and MyHC-IIb mRNA levels.Conclusions: In conclusion, these results provided compelling evidence that the different dietary starch source altered the carcass traits, meat flavor and quality in finishing pigs, and consumption of a diet with higher amylose/amylopectin ratio results in the production of a healthy, higher quality, and nutritional value pork.