SYNTHESIS AND PHASE BEHAVIOUR OF CHIRAL COMBINED MAIN/SIDE CHAIN LIQUID CRYSTALLINE COPOLYMERS

The synthesis and phase behaviour of chiral combined main/side chain liquid crystallinecopolymers containing pendant group constituted by chiral side group and trans-azobenzenemoiety with nitro end group are described. The formation of liquid crystalline polymorphism ofcopolymers is influenced by various contents of achiral side group.

MORPHOLOGICAL STUDIES OF A THERMOTROPIC SIDE-CHAIN LIQUID CRYSTALLINE POLYMER DURING MESOPHASE TRANSITIONS

The morphological features of a side-chain liquid crystalline polymer during the mesophase transitions were investigated by using the DSC technique. The polymer used was polyacrylate with mesogens of three benzene rings attached to the main chain through a flexible spacer. A special two-phase texture was observed in the transition temperature range. Similar to main-chain liquid crystalline polymers the transition process of the side-chain liquid crystalline polymer was composed of an initiation of the new phase at local places of the old phase matrix and a growth process of the new phase domains.

Modification of Interfacial Interaction of PBT/PP Blends by Adding Main-chain Liquid Crystalline Ionomer with Sulfonic Group

A main-chain liquid crystalline ionomer（MLCI） containing sulfonic group was synthesized by an interfacial condensation reaction.The MLCI was blended with polybutylene terephthalate（PBT） and polypropylene（PP）.MLCI interacted with both the dispersed（PP） phase and the matrix（PBT） phase to modify the interfacial interaction of PBT and PP.Differential scanning calorimetry（DSC）,scanning electron microscopy（SEM） and FTIR imaging system analysis demonstrated the significance of interfacial interaction in the polymer blends.MLCI brought about good adhesion at the interfacial,which reduced the disperse phase size and enabled a fine PP phase at matrix.The mechanical properties of the ternary blends were improved when a proper amount of MLCI was added.This was attributed to enhanced adhesion at the interface,which invoked better mechanical properties in the blends.

LAMELLAR STRUCTURE OF THERMOTROPIC LIQUID CRYSTALLINE POLYMERS

The lamellar structure of a thermotropic aromatic polyester with flexible spacer has beenstudied by using transmission electron microscopy. It was found that the lamellar structure couldbe observed in the crystalline samples of this semirigid polymer crystallized from different states.The thickness of lamellae is around 10 nm, which is similar to that of the conventional polymersof flexible chain molecules. The molecular chains in the lamellae are oriented in the thicknessdirection as determined by electron diffraction. The possibility of molecular chains folding in the lamellae has been discussed.

The Rheological and Extrusion Behaviour of Blends Based on Phenolphthalein Poly(ether-ether-sulfone)and Thermotropic Liquid Crystalline Polymer

A novel engineering thermoplastic, phenolphthalein poly(ether ether sulfone)(PES C) was blended with a commercial thermotropic liquid crystalline polymer(TLCP), Vectra A950, up to 30 weight percent of TLCP. A rheometrics dynamic spectrometer (RDS Ⅱ) and a CEAST capillary rheometer, a rheoscope 1000 were employed to investigate the melt rheology and extrusion behaviour at both the low and high shearing rates. The morphologies of the blends under different shearing were observed with a scanning electron microscope(SEM) and correlated to the observed rheology. The principal normal stress differences measured with cone and plate geometry give a temperature independent correlation for both blend and PES C when they are plotted against shear stress. But the extrudate swell of the blends showed a strong temperature dependence at each shear stress. The concentration dependence of extrudate swell shows a contrary behaviour to that of the inorganic filled system. A reasonable hypothesis based on the relaxation and disorientation of TLCP during flowing in the capillary and exiting was given to explain it. The melt fracture was checked after extrusion from capillary and was discussed.

Synthesis of Liquid Crystalline Polymers with Side Chains

The present paper covers the synthesis and characterization of several intermediate products, monomer, and polymers. 3-{ 2-[ 4-( 4-Nitrophenylazo ) phenoxy] ethyloxycarbonyl} propanoyloxy (2-hydroxy) propyl acrylate (4) was prepared by the ring-opening reaction of glycidyl acrylate with the monoester of succinic acid (3). The polymers (5) with different molecular weights were prepared by the free-radical polymerization. The polymers (5) had liquid crystalline behavior without decomposition as revealed by DSC, optical microscope.

MELT BLENDS OF POLY (BUTYLEN TEREPHTHALATE) AND A THERMOTROPIC LIQUID CRYSTALLINE POLYMER

With the help of differential scanning calorimetry, cone-plate and capillary rheometry andscanning electron microscopy, a research has been conducted on rheological behavior,crystallization and morphology of poly (butylene terephthalate) (PBT) blends containing athermotropic LCP. The blend has zero entrance pressure loss, although the LCP has rather largeone. The viscosity curve of the blend lies between those of the LCP and PBT. The crystallizationof PBT is not affected by the presence of the LCP together with no indication oftransesterification between the two ingredients. LCP spheres and ellipsoids with the size of 0. 5--1. 5 μm disperse in PBT matrix uniformly, which is related to the viscosity ratio of the two components.

STUDIES ON THE AGGRESGATION BEHAVIOUR OF A SIDE－CHAIN LIQUID CRYSTALLINE POLYMER IN LANGMUIR－BLODGETT FILMS

be aggregation behavior of a side chain liquid crystaline polymer (PSLC) has been investigated by means of surface pressure-area isotherm, TEM and SEM observation X-ray diffraction, and UV-vis spectroscopy. Resulte obtained can be explained by molecular exciton model.

MORPHOLOGICAL AND KINETIC STUDIES OF PHASE TRANSITIONS OF A SIDE-CHAIN LIQUID CRYSTALLINE POLYMER

The morphological changes of a side-chain liquid-crystalline polymethacrylate during isotropization and liquid-crystallization transitions were studied by means of polarizing microscopy. These transitions were found to be composed of the initiation of a new phase at local places of the old phase matrix and the growth of the new phase: domains. The kinetics of the liquid-crystallization of the polymer from an isotropic melt to a smectic mesophase was also investigated. The isothermal process of the transition can be described by the Avrami equation. The values of the Avrami exponent were found to be around 2.6. which is lower than the value usually obtained for crystallization transition of polymers, but larger than that reported for liquid-crystallization transition of main-chain polymers. These results may indicate the difference in growth geometry of new phase during transition between crystallization and liquid-crystallization in general and between liquid-crystallization of main-chain and side-chain polymers. It was found that the liquid-crystallization of the used side-chain polymethacrylate may occur at small undercoolings with high transformation rate similar to that of main-chain polymers and small-molecule liquid crystals, while the crystallization of polymers can only proceed at large undercoolings. These phenomena can be explained by the idea that the surface free energy of nucleus during liquid-crystallization transition is less than that for crystallization, and evidence was obtained from analysis of the temperature dependence of the transformation rate.

SYNTHESIS AND CHARACTERIZATION OF TRIAZOLE CONTAINING LIQUID CRYSTALLINE POLYMERS THROUGH 1,3-DIPOLAR CYCLOADDITION POLYMERIZATION

Liquid crystalline polymers containing 1,2,3-triazole units as linking groups have been synthesized from the monomers containing triad ester diazide and flexible dialkyne ester by 1,3-cycloaddition reaction and were characterized. Click reaction of azide and alkyne functionals catalyzed by Cu(I) yielded target polyesters with 1,2,3-triazole groups.The structure of the polymer was confirmed by spectral techniques.GPC analysis reveals that the polymers have moderate molecular weight with narrow distribution.H...

NUCLEATION ACTION OF THERMOTROPIC LIQUID CRYSTAL POLYMERS IN THE BLENDS WITH PET

The present work concerns the crystallization of PET accelerated by addition of thermotropic liquid crystalline polymers (TLCP)based on two aromatic copolyesters: PHB/PET (60:40 ) and PHB/HDA/2,6-DNA /IPA ( 50:25 : 12.5 : 12.5 ). The investigation has been made by measurements of the cold-crystallization and melt-crystallization temperatures by DSC and of the changes of density and depolarizing light intensity during the isothermal process. In addition, the morphology of selectively etched surface of compressing pellets proved the presence of crystalline fibrillar structure, it can be supposed to have grown up from the micelle nucleus based on bundle of rigid TLCP chains.

Synthesis and Characterization of Cholesteric Thermotropic Liquid Crystalline Polyesters Based on Isosorbide

BACKGROUND: Generally main chain cholesteric thermotropic liquid crystalline polymers are prepared form chiral diacid or diol monomer. But these monomers are costly. Isosorbide is chiral cycloaliphatic diol accessible from renewable resources in the form of pure enantiomers. Thus it is used to synthesize main chain cholesteric thermotropic liquid crystalline polymers. Incorporation of phenyl hydroquinone into the backbone of the main chain frustrates chain packing, thus lowering the crystallinity and depressing the melting point below the degradation temperature, also improves the solubility due to disruption of packing and maintains the mechanical and thermal performance. RESULTS: Optical microscopy study reveals that more than 50% of isosorbide content with phenyl hydroquinone and terephthalic acid showed “yellow iridescent oily streaks” with a background of mosaic/marble texture. These are the typical textures of cholesteric liquid crystalline phase. Copolyesters based on phenyl hydroquinone, isosorbide and terephthalic acid are soluble in aprotic solvents like N,N-dimethylacetamide (DMAC), dimethyl sulfoxide (DMSO), N,N-dimethylformamide (DMF), and N-methyl-2-pyrrolidone (NMP). Solubility increases with the content of isosorbide percent. Thermal stability of all copolyesters was more than 300?C on the basis of 10% wt loss. CONCLUSIONS: It was found that main chain cholesteric thermotropic liquid crystalline polymers can be prepared form chiral cycloaliphatic diol such as isosorbide. Main chain cholesteric thermotropic liquid crystalline polyesters are prepared from phenyl hydroquinone, isosorbide and terephthalic acid showed thermal stability more than 300?C. Main chain cholesteric thermotropic liquid crystalline polymers are soluble in aprotic solvents like DMAC, DMSO, DMF and NMP.

MECHANICAL PERTURBATION INDUCED MOLECULAR ALIGNMENTS IN A SIDE-CHAIN LIQUID CRYSTALLINE POLYACETYLENE, POLY{10-[4-(4'-METHOXYPHENOXY-CARBOML)PHENOXYCARBONYL]-1-DECYNE}

A new liquid crystalline polyacetylene containing a phenyl benzoate mesogen (5) is synthesized,whose mesomorphic properties are found to be easily 'tunab1e' by simple mechanical perturbation. Thepolymerization of 10- [ 4 - (4' -methoxyphenoxycarbonyl )phenoxycarbonyl] - 1 -decyne (4 ) in itiated by theWCl_6-Ph_4Sn/dioxane complex yields polymer 5 with a M_w of 28400. The molecular structure of 5 ischaracterized by NMR, IR, and UV spectroscopy and its liquid crystalline behavior is investigated by DSC,POM, and XRD analysis. Upon mechanical perturbation, 5 exhibits unusual agitation-induced high-strengthdisclinations, shear-induced inversion walls, and solidification-induced banded textures. Such phenomenahave been observed in the main-chain liquid crystalline polymers with rigid backbones, but have seldom beenreported for the side-chain liquid crystalline polymers with flexible backbones, suggesting that the rigidpolyacetylene backbone of 5 plays a constructive role in inducing the novel molecular alignments.

SYNTHESIS AND CHARAOTERIZATION OF NOVEL THERMOTROPIO LIQUID ORYSTALLINE POLYESTERS BEARING NONLINEAR OPTICAL AZOBENZENE SIDE GROUP

A series of novel thermotropic liquid crystalline polyesters bearing nonlinear optical azobenzene side group were synthesized by high temperature solution polycondensation and their structures,thermal stability, phase transition behavior and crystallinity were characterized by IR,elemental analysis, TG-DTA, polarizing optical microscope (POM) equipped with a hot stage and X-ray diffraction techniques. The results demonstrate that all the synthesized polyesters exhibit nematic liquid crystalline phases and show relatively high glass transition temperatures and good thermal stability.

Synthesis of an Azobenzene-containing Main-chain Crystalline Polymer and Photodeformation Behaviors of Its Supramolecular Hydrogen-bonded Fibers

The synthesis of a new azobenzene(azo)-containing main-chain crystalline polymer with reactive secondary amino groups in its backbone and photodeformation behaviors of its supramolecular hydrogen-bonded fibers are described. This main-chain azo polymer(namely Azo-MP6) was prepared via first the synthesis of a diacrylate-type azo monomer and its subsequent Michael addition copolymerization with trans-1,4-cyclohexanediamine under a mild reaction condition. Azo-MP6 was found to have a linear main-chain chemical structure instead of a branched one, as verified by comparing its ~1H-NMR spectrum with that of the azo polymer prepared via the polymer analogous reaction of AzoMP6 with acetic anhydride. The thermal stability, phase transition behavior, and photoresponsivity of Azo-MP6 were characterized with TGA,DSC, POM, XRD, and UV-Vis spectroscopy. The experimental results revealed that it had good thermal stability, low glass transition temperature,broad crystalline phase temperature range, and highly reversible photoresponsivity. Physically crosslinked supramolecular hydrogen-bonded fibers with good mechanical properties and a high alignment order of azo mesogens were readily fabricated from Azo-MP6 by using the simple melt spinning method, and they could show "reversible" photoinduced bending under the same UV light irradiation and good anti-fatigue properties.

Multiple Effects Tailoring the Self-organization Behaviors of Triphenylene Side-chain Liquid Crystalline Polymers via Changing the Spacer Length

Long-alkyl tail triphenylene （TP） side-chain liquid crystalline polymers （SCLCPs） with different spacer length （P-m-TP, m = 2, 3, 4, 6, 8, which is the number of carbon atom in the flexible alkyl spacers） have been successfully synthesized via free radical polymerization. The differential scanning calorimetry （DSC）, polarized light microscopy （POM）, ultraviolet-visible spectroscopy （UV- Vis）, wide-angle X-ray diffraction （WAXD） and small-angle X-ray scattering （SAXS） measurements were performed to investigate the influence of multiple effects on the self-organization behaviors of P-m-TP, including steric effect, decoupling effect and π-π stacking effect. The experimental results revealed that P-m-TP （m = 2, 3, 4） formed the columnar phase which was developed by the TP moieties and the main chain as a whole, suggesting that the side-chains had strong steric effect even though the number of spacer length （m） exceeded 4. In addition, the clearing points （Tis） of the polymers were above 300 ℃. When m = 6 and 8, the polymers displayed hexagonal columnar phase and exhibited the low Tis （91 and 80 ℃ respectively）, originating from the self-assembly of triphenylene due to the decoupling effect and π-π stacking effect. This work offers a viable and inspiring pathway to control the phase transition temperature and phase structure ofTP SCLCPs via simply tailoring the spacer length and increasing the alkyl tail length of TP.

Studies on the Synthesis,Characterization and Properties of the Reactive Thermotropic Liquid Crystalline Polymer

1 Introduction Four species of reactive thermotropic liquid crystalline polymer (LCMC) with different relative molecular weight were synthesized in this work (see scheme 1, n=2, 6, 10, ∞.n means number of repeat structure unit). Their structure, morphology and properties were investigated systemically by differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), Wide-angle X-ray diffraction (WAXD), polarizing opticalmicroscopy (POM) and ubb...

FORMATION OF MESOPHASE MONO-DOMAINS AND MICRO-STRUCTURES IN THIN FILMS OF A SERIES OF COPOLYETHERS CONTAINING BOTH ODD-NUMBERED METHYLENE UNITS

The structural and morphological evolution of mono-domains in thin films has been investigated for a series of liquid crystalline (LC) copolyethers. The copolyethers studied were synthesized by the reaction of 1-(4-hydroxy-4 ' -biphenylyl)-2-(4-hydroxyl-phenyl)propane (TPP) with 1,7-dibromoheptane and 1,11-undecane at different compositions (coTPPs-7/11). In contrast to the solution-cast thin films without annealing, which exhibit the isotropic homogeneous molecular orientation, mono-domains with a homeotropic alignment were found in coTPP-7/11(5/5) after the thin films were annealed in the high-temperature columnar phase (Phi '). Similar to the nucleation process in polymer crystallization, transmission electron microscopic observations show that small mono-domains appear in the initial stage of annealing, where molecules form a uniaxial in-plane chain orientation. With increasing annealing time, the molecular orientation gradually became tilted with respect to the substrate surface, and finally, a uniaxial homeotropic molecular orientation was achieved after a prolonged annealing time. The lateral size of mono-domains was found to increase continuously with annealing time and grew into a circular shape, indicating an isotropic lateral growth scheme which implies a hexagonal molecular packing proved by the electron diffraction experiments.

基于光配向的主链型液晶聚合物预倾角的控制

液晶的方位角和预倾角的调制广泛应用于各类液晶光子器件的研究。液晶预倾角调控常使用的小分子液晶容易受外场干扰导致液晶预倾角的改变,影响液晶器件稳定性和可靠性。液晶聚合物具有相变温度高、耐热、耐强光、耐机械振动、更加稳定不易受外场干扰等优点,因此液晶聚合物预倾角的可控制备有着重要研究意义。由于液晶单体受液晶与空气界面的锚定能的影响,RM257液晶聚合物的预倾角与液晶层的厚度有关,难以实现预倾角的稳定可控。本研究利用两步法曝光偶氮染料亮黄(BY)薄膜诱导液晶单体RM257倾斜,采用多层旋凃及液晶单体RM257光聚合的方式降低液晶与空气界面锚定能对预倾角的影响,实现RM257主链型液晶聚合物预倾角可控制备。结果表明,采用这一方法制备的液晶聚合物薄膜预倾角可在0°~16°之间连续可调,并具有光热稳定的优点,具备实现液晶光子器件所需的图案化能力。本研究有望为液晶光子与显示器件的制备提供新的材料设计思路。