Strong shock propagation for the finite-source circular blast in a confined domain

The circular explosion wave produced by the abrupt discharge of gas from a high-temperature heat source serves as a crucial model for addressing explosion phenomena in compressible flow.The reflection of the primary shock and its propagation within a confined domain are studied both theoretically and numerically in this research.Under the assumption of strong shock,the scaling law governing propagation of the main shock is proposed.The dimensionless frequency of reflected shock propagation is associated with the confined distance.The numerical simulation for the circular explosion problem in a confined domain is performed for validation.Under the influence of confinement,the principal shock wave systematically undergoes reflection within the domain until it weakens,leading to the non-monotonic attenuation of kinetic energy in the explosion fireball and periodic oscillations of the fireball volume with a certain frequency.The simulation results indicate that the frequency of kinetic energy attenuation and the volume oscillation of the explosive fireball align consistently with the scaling law.

Ground response and failure mechanism of gob-side entry by roof cutting with hard main roof

This study is the result of long-term efforts of the authors’team to assess ground response of gob-side entry by roof cutting(GSERC)with hard main roof,aiming at scientific control for GSERC deformation.A comprehensive field measurement program was conducted to determine entry deformation,roof fracture zone,and anchor bolt(cable)loading.The results indicate that GSERC deformation presents asymmetric characteristics.The maximum convergence near roof cutting side is 458 mm during the primary use process and 1120 mm during the secondary reuse process.The entry deformation is closely associated with the primary development stage,primary use stage,and secondary reuse stage.The key block movement of roof cutting structure,a complex stress environment,and a mismatch in the supporting design scheme are the failure mechanism of GSERC.A controlling ideology for mining states,including regional and stage divisions,was proposed.Both dynamic and permanent support schemes have been implemented in the field.Engineering practice results indicate that the new support scheme can efficiently ensure long-term entry safety and could be a reliable approach for other engineering practices.

Analysis of Dry-Wet Climate Change Characteristics and Main Influencing Factors in Main Grain Producing Area of Tibet from 1980 to 2021

Based on the daily meteorological observation data of seven meteorological stations in southern Tibet from 1980 to 2021 (April-October), the temporal and spatial variation characteristics and influencing factors of aridity index ( AI ) in the growing season of major grain producing areas in Tibet were studied by using climate tendency rate, Mann-Kendal test, Morlet wavelet analysis, GIS hybrid interpolation method, Pearson correlation coefficient, contribution rate analysis and other methods. The results showed that the average AI in the main grain producing areas of Tibet was 1.7, which belonged to the semi-arid area, and the overall trend was decreasing (humidifying) (-0.036/10 a). The linear decreasing trend was different in different regions, and the area around Lhatse County was the most significant (-0.26/10 a). AI had no obvious abrupt change, and had long- and medium-term fluctuation characteristics of 24 years, 6 years. The spatial distribution was uneven, and had the characteristics of ‘shrinking arid area and expanding humid area . The contribution rates of the main climate influencing factors of AI varied in different regions. In general, the contribution rates after quantification was as follows: precipitation (34.9%)>relative humidity (28.4%)>sunshine (19.9%)>maximum temperature (12.4%).

Acute Left Main Coronary Occlusion Following Transcatheter Aortic Valve Implantation

Background: Aortic stenosis (AS) is caused by either age-related degeneration of aortic valve or congenital malformation of aortic cusps. Severe aortic valve stenosis is a clinically emerging diagnosis in the current world. The three cardinal signs of severe AS are dyspnea, syncope, and angina. Transcatheter aortic valve implantation is one of the safe and effective methods for treating severe aortic valve stenosis, and an alternative to surgery in high-risk patients. Aortic valve calcification and changes after TAVI were specifically assessed by computed tomography. Excessive aortic valve calcification is related to procedural complications. A possible consequence is obstruction of coronary ostia. Heavy calcification of the aortic valve and surrounding structure is an important risk factor for coronary obstruction, heart block, and embolization during aortic valve implantation (TAVI). Here we present a case of an elderly old man, where critical ostial left main coronary artery (LMCA) disease was caused by shifting of a calcium speck rather than obstruction with native leaflet. He was successfully rescued by an emergent CABG. Methods and Results: This is a case of a 69-year-old man with severe calcific aortic stenosis and single-vessel CAD who underwent TAVI with a relatively unremarkable course. Notably, his pre-operative TAVI angiography showed no LMCA stenosis. But 10 days later he presented to the ER with acute myocardial infarction with peak high-intensity troponins, diffuse ST changes, and cardiogenic shock. Urgent coronary angiography and intravascular ultrasound showed critical LMCA stenosis caused by a speck of calcium externally abating the vessel. He underwent emergency coronary artery bypass grafting;intraoperative TEE confirmed the etiology. He had an uneventful postoperative course and was successfully weaned off vasoactive medications. Conclusion: This case illustrates that obstruction of coronary ostia could be a possible complication of TAVI. Calcium distribution should factor in TAVI versus surgical candidacy. Calcium shifting should be watched closely during valve deployment, post-TAVI coronary angiogram should be considered if shifting was significant or suspected to compromise coronary arteries.

Minimally Invasive Total Arterial Coronary Artery Bypass Grafting in Left Main Stem Disease

Objective: The aim was to show that Minimally Invasive total arterial revascularization for left main stem coronary artery disease, via a left anterior Mini thoracotomy using bilateral internal thoracic arteries is feasible, reproducible and safe. Further, there has been no exclusive data or experience with minimally invasive coronary artery bypass grafting in left main stem disease. Methods: From April 2019 to March 2024, 41 patients with left main stem stenosis, left main equivalent disease and unprotected left main with triple vessel disease underwent off pump minimally invasive multivessel coronary artery bypass grafting using either in situ pedicled Bilateral Internal Thoracic arteries or Left and Right Internal Thoracic artery Y composite conduits at three centers. Bilateral Internal Thoracic arteries were harvested under direct vision. All patients had an Intra-Aortic Balloon Pump inserted via the femoral artery prior to induction of anesthesia, to prevent any hemodynamic instability, arrhythmias, and was removed following completion of the procedure in the operating room without any complications. Efficacy and outcomes were evaluated by i) Primary (MACCE)-Major Adverse Cardiac and Cardiovascular events and ii) Secondary outcome measures including total length of stay, return to full physical activity and quality of life. Mean follow-up was 1.4 years (Maximum was 2.5 years). Results: 41 patients with left main stem coronary artery stenosis, underwent total arterial revascularization using bilateral internal thoracic arteries. Left main stem stenosis was present in 29 patients, Unprotected left main stem stenosis with triple vessel disease in 7 and left main equivalence in 5 patients. In this cohort, 29 patients with only left main stem stenosis had 2 grafts each, 7 patients with left main and triple vessel disease had 3 grafts and 5 patients with left main equivalent disease had 2 grafts respectively. The average number of grafts was 2.2. One patient was converted to open sternotomy as an emergency because of hemodynamic instability and myocardial revascularization was done on cardiopulmonary bypass (2.2%). The average hospital stay was 3.7 days. Ejection fraction was 45% ± 5%. There was one mortality (2.2%) but no major morbidity. The average ICU and hospital stay was 24 ± 4 hours and 3.7 days. All patients were free from major adverse cardiac and cerebrovascular events at follow-up. Conclusions: Multivessel total arterial revascularization using left and right internal thoracic arteries, was performed via a left anterior Mini thoracotomy on patients with left main stem disease and showed that it was safe, reproducible and will help extend the armamentarium of the surgeon in minimally invasive Coronary artery bypass grafting. Concomitantly it helped enhance the potential for shorter hospital stay, increased survival, decreased morbidity, and earlier return to full activity. Furthermore, the safety, efficacy, and outcomes of minimally invasive coronary artery bypass grafting in this high-risk group evaluated by primary and secondary outcome measures have been good in this study.

Study on the Countermeasures to Improve the Public Outdoor Leisure and Fitness Function on the Two Rivers and Four Banks in the Main Urban Area of Chongqing

The main urban area of Chongqing is surrounded by two rivers and set against each other.With its unique waterfront landscape,it has the resource conditions to become a leisure tourism destination.Intending to enhance people’s happiness,improve city quality,and promote Chongqing’s main urban area to become a tourist destination,this paper finds out the existing problems in the construction of public outdoor leisure and fitness facilities on the two rivers and four banks of Chongqing’s main urban area through investigation and analysis based on relevant experiences at home and abroad,takes the value chain theory as the guidance,and to find solutions to the problem.On this basis,combined with the law of economic operation,this paper puts forward the guiding ideology,principles,development goals,functional orientation,and development path for the improvement of public outdoor leisure and fitness on two rivers and four banks in the main city of Chongqing,and accordingly puts forward the policy system and guarantee measures for its improvement.

“Eternal Motion” as a “Form of Movement of a Special Nature” and the Main Condition for the Creation of the Universe

The article hypothesizes that DE and DM (UCM) are a “Form of Motion of a Special Nature”, where “Form of Motion” means “Eternal Motion” as the power of dynamics of different levels and varying degrees of self-sufficiency, and by “Special Nature”, gravitational and two other properties of matter, “tied” to the “Eternal Movement” and completely dependent on it. Carriers of key properties of a “Special Nature” have been established: “0”-DE particles and “3”-DM particles (UDM). The unity of their inherent “motionally-gravitational” properties and the peculiarity of the relationship between “motion” and “gravity” are revealed: the higher the intensity of “Eternal Motion”, the stronger the gravitational properties of matter are manifested (and vice versa). The relationship of “time” with the “vibration frequency” and the “mass” of photons with the “degree of bonding and deformation properties of the field” is shown. The maximum level of gravity has been determined, which allows Nature to successfully create the Universe: such a landmark is the proximity to the property of the Primary Source—the “pure graviton” of the OSP space, the most powerful “motionally-gravitational” particle of the Universe. The reasons for the emergence of such an identity of the gravitational properties of particles with the indicators of a “pure graviton” are established: for “0”-DE particles, this is the acquisition of the function of “freedom of movement”;for “3”-DM particles (UDM), the creation of a special structure—a “double field” (“Main” and “Small”). The presence in the “double field” of specific “tools” for the creation of the worlds of the Universe—gravitational “waves” gives rise to impulses (shocks) of varying intensity and shape. A list of functions performed by “waves” in the “Main” and “Small” fields has been compiled. The specific conditions for the formation of “UDM Streams”, their transformation into a “Vortex” and, under the influence of a powerful Initial Impulse (push), sending them to the “place” of the creation of galaxies, are shown. It is suggested that there is a “Cycle of Matter in Nature” in the closed structure of our Universe due to the “work” of “waves” and the functioning of special “factories” in the form of exotic space objects—Black holes.

Construction of Anti-breaking Models of the Main Veins of Flue-cured Tobacco Leaves and Principal Component Analysis

[Objective] This study aimed to explore the related mechanisms of the breaking of flue-cured tobacco leaves. [Method] Anti-breaking models of the main veins of flue-cured tobacco leaves were constructed for principal component analysis on the anti-breaking index, leaf traits and cellulose contents. [Result] The results showed that the growth traits had certain relevance with the cellulose contents while the leaf weight assumed a significant negative correlation with the anti-breaking index, indicating that the heavier the leaf weight was, the weaker the anti-breaking capacity of flue-cured tobacco would be; the cross-sectional area of main veins and the cellulose contents had shown a positive correlation with the anti-breaking index, indicating that the thicker the main vein of flue-cured tobacco was, the higher the cellulose contents would be, and the stronger the anti-breaking capacity of flue-cured tobacco leaves would be. [Conclusion] This study provided theoretical basis and reference to improve tobacco production and enhance the quality of flue-cured tobacco.

Analysis on the Combining Ability and Heritability of Main Agronomic Traits of Hybrid Glutinous Sorghum

Using 3 sterile lines and 12 restorer of glutinous sorghum as experimental materials,36 hybrid combinations（3×12 NCⅡ） were designed to analyze the combining ability and heritability of six main agronomic traits,including plant height,panicle length,growth period,1 000-grain weight,per panicle grains and per panicle grain weight.The results showed that except per panicle grain number all other five agronomic traits have remarkable or extremely remarkable general combining ability and specific combining ability.Six agronomic traits were found to be control by additive genetic effect.Most of these agronomic traits are more easily influenced by restorers than sterile lines,suggesting that more attention should be paid to select restores in hybrid glutinous sorghum breeding.The narrow-sense heritability of these agronomic traits were in order growth period plant height per panicle grain weight panicle length 1 000-grain weight per panicle grains.

Spatial structural analysis of main saddle for single tower spatial cable self-anchored suspension bridge

Based on the engineering background of the Jiangxinzhou Bridge in Nanjing, issues related to the spatial main saddle of the self-anchored suspension bridge are studied. The refinement finite element model is established by the secondary development technology based on the platform of the general finite element program, and a reasonable load pattern is used in its spatial structural analysis, by which its path of force transference and stress distribution are obtained. Matched with the spatial main cable, the tangency point correction method is also discussed. The results show that the lateral wall stress of the saddle groove is higher than the stress within the wall due to the role of lateral forces in the finished bridge state; the horizontal volume force of the main cable can generate a gradient distributed vertical extrusion pressure on the saddle clamping device and the main saddle body; the geometric nonlinear effect of the self- anchored suspension bridge cable system in the construction process is significant, which can be reflected in the spatial tangent point position of the main cable with the main saddle changes a lot from free cable to finished cable.

Statistical characteristics and classification of ionospheric mid-latitude trough as revealed by the observations of DMSP-F18

Statistical characteristics and the classification of the topside ionospheric mid-latitude trough are systemically analyzed,using observations from the Defense Meteorological Satellite Program F18(DMSP-F18)satellite.The data was obtained at an altitude of around 860 km in near polar orbit,throughout 2013.Our study identified the auroral boundary based on the in-situ electron density and electron spectrum,allowing us to precisely determine the location of the mid-latitude trough.This differs from most previous works,which only use Total Electron Content(TEC)or in-situ electron density.In our study,the troughs exhibited a higher occurrence rate in local winter than in summer,and extended to lower latitudes with increasing geomagnetic activity.It was found that the ionospheric mid-latitude trough,which is associated with temperature changes or enhanced ion drift,exhibited distinct characteristics.Specifically,the ionospheric mid-latitude troughs related to electron temperature(Te)peak were located more equatorward of auroral oval boundary in winter than in summer.The ionospheric mid-latitude troughs related to Te-maximum were less frequently observed at 60−70°S magnetic latitude and 90−240°E longitude.Furthermore,the troughs related to ion temperature(Ti)maximums were observed at relatively higher latitudes,occurring more frequently in winter.In addition,the troughs related to ion velocity(Vi)maximums could be observed in all seasons.The troughs with the maximum-Ti and maximum-Vi were located closer to the equatorward boundary of the auroral oval at the nightside,and in both hemispheres.This implies that enhanced ion drift velocity contributes to increased collisional frictional heating and enhanced ion temperatures,resulting in a density depletion within the trough region.

Mathematically modeling the main dimensions of self-elevating drilling units

The present status of self-elevating drilling units was analysed. Based on statistics of the main dimensions of self-elevating drilling units, a mathematical model was established using stepwise return procedures and a back-propagation neural network. mathematical model is applicable and reliable. The of the main dimensions of self-elevating drilling Analysis of examples of calculations showed that the model is useful for mastering the essential variations units and can be used for technical and economic analysis as well as in conceptual designs of drilling units.

Genetic Diversity Analysis of the Main Commercial Varieties of Brassica napus in Guizhou Province

[Objective] The aim was to investigate the genetic diversity of the main commercial varieties of Brassica napus in Guizhou Province at the molecular level. [Method] Nine main commercial rapeseed cultivars in Guizhou were detected by 40 pairs of SSR primers used in the national regional trial of B. napus, and then clus-tering analysis was carried out. [Result] A total of 191 bands were amplified, and 143 （accounting for 75%） of them showed polymorphism among the nine rapeseed cultivars. By cluster analysis, the nine cultivars were divided into two groups. Group A included seven varieties, and group B consisted of two cultivars from Guizhou In-stitute of Oil Crops. The cultivars in group A were further divided into sub-groups A1 and A2 at the similarity coefficient of 0.643 4. Sub-group A1 included three culti-vars from Guizhou Rapeseed Institute, and sub-group A2 included the other four cultivars from Guizhou Institute of Oil Crops. [Conclusion] The cultivars bred by the same institute had similar genetic background. The cultivars from Guizhou Institute of Oil Crops showed wider genetic basis. However, the genetic similarity coefficient between Qianyou 17 and Qianyou 29 was up to 0.87, suggesting that they shared closer genetic basis.

Knowledge Discovery in Maintenance Record of FMS Equipment for Diagnosing

To discover the knowledge of fault diagnosis in maintenance record of flexible manufacture system(FMS) equipment. An algorithm (process) was presented, which consists of ① preparatory phase in which some items in maintenance record are selected and decomposed into associated concepts and attributes, and ② discovering and establishing process, in which some possible relationships between the concepts and attributes can be established and knowledge is formulated. The rich diagnosis knowledge in maintenance record was captured through applying the method. An application of the method to the diagnosis system for FMS equipment showed that the approach is correct and effective.

Application of jet main region specification model in CFD simulation for room air movement analysis

This paper analyzes the applications of four air terminal device（ATD）models（i.e.,the basic model,the box model,the N-point momentum model,the jet main region specification model）in computational fluid dynamics（CFD）simulation and their performance in case study.A full-scale experiment is performed in an environment chamber,and the measured air velocity and temperature fields are compared with the simulation results by using four ATD models.The velocity and temperature fields are measured by an omni-directional thermo-anemometer system.It demonstrates that the basic model and the box model are not applicable to complicated air terminal devices.At the occupant area,the relative errors between simulated and measured air velocities are less than 20% based on the N-point momentum model and the jet main region specification model.Around the ATD zone,the relative error between the numerical and measured air velocity based on the jet main region specification model is less than 15%.The jet main region specification model is proved to be an applicable approach and a more accurate way to study the airflow pattern around the ATD with complicated geometry.

STIFFNESS ANALYSIS OF THE MAIN MODULE FOR PARALLEL MACHINE TOOLS BY FINITE ELEMENT ANALYSIS

With the aid of commercial finite element analysis software package ANSYS,investigations are made on the contributions of main components to stiffness of the main module for parallel machine tools,and it is found that the frame is the main contributor.Then,influences of constraints,strut length and working ways of the main module have also been investigated.It can be concluded that when one of the main planes of the frame without linear drive unit is constrained,the largest whole stiffness can be acquired.And,the stiffness is much better when the main module is used in a vertical machine tool instead of a horizontal one.Finally,the principle of stiffness variation is summarized when the mobile platform reaches various positions within its working space and when various loads are applied.These achievements have provided critical instructions for the design of the main module for parallel machine tools.

A logistic-Lasso-regression-based seismic fragility analysis method for electrical equipment considering structural and seismic parameter uncertainty

Damage to electrical equipment in an earthquake can lead to power outage of power systems.Seismic fragility analysis is a common method to assess the seismic reliability of electrical equipment.To further guarantee the efficiency of analysis,multi-source uncertainties including the structure itself and seismic excitation need to be considered.A method for seismic fragility analysis that reflects structural and seismic parameter uncertainty was developed in this study.The proposed method used a random sampling method based on Latin hypercube sampling(LHS)to account for the structure parameter uncertainty and the group structure characteristics of electrical equipment.Then,logistic Lasso regression(LLR)was used to find the seismic fragility surface based on double ground motion intensity measures(IM).The seismic fragility based on the finite element model of an±1000 kV main transformer(UHVMT)was analyzed using the proposed method.The results show that the seismic fragility function obtained by this method can be used to construct the relationship between the uncertainty parameters and the failure probability.The seismic fragility surface did not only provide the probabilities of seismic damage states under different IMs,but also had better stability than the fragility curve.Furthermore,the sensitivity analysis of the structural parameters revealed that the elastic module of the bushing and the height of the high-voltage bushing may have a greater influence.

合理利用Main Task资源,升华英语课堂教学

本文介绍了Main Task板块资源的特色,分析了该板块教学的现状。教师应借鉴其精华,更新师生的原始数据库,革新英语课堂教学中的思维方式和学习方法,优化课外作业的结构,不断扩充内存,探讨提升学生英语水平的新途径。

On the Main Characters in“Days of the Butterfly”

"Days of the Butterfly"was one of Alice Munro's short stories written in 1950 s, when she was still a new hand. This paper will mainly focus on the development of the main characters in the story, including Myra, the black girl who was the heroine, the teacher Miss Darling, and the Narrator"I". In portraying these characters, Munro adopted several writing techniques including conversation, detailed description, psychological description and so on. She vividly transferred those characters into paper.