不同海域Custom450高强度不锈钢的腐蚀规律研究

目的 研究Custom450钢在青岛、舟山、厦门及三亚等4个海域大气和飞溅环境中的自然腐蚀规律。方法 采用形貌分析、腐蚀速率、点腐蚀深度分析等方法对Custom450钢在上述4个海域大气和飞溅区的腐蚀规律进行研究。结果 Custom450钢在4个海域大气环境的年平均腐蚀速率相当,且未观察到有点蚀现象发生,舟山海域的年平均腐蚀速率最小,为0.001 41 mm/a,三亚海域的年平均腐蚀速率最大,为0.001 54 mm/a。4个海域飞溅区的年平均腐蚀速率范围为0.0021~0.0028mm/a,舟山海域的年平均腐蚀速率为0.002 1 mm/a,平均及最大点腐蚀深度分别为5.7μm和25.99μm,均低于其他3个海域。结论 Custom450钢在4个海域的大气环境暴露1 a后,未发现明显的腐蚀现象,表明该钢短期内在上述4个海域海洋大气环境中具有良好的耐蚀性。在飞溅环境中的腐蚀速率高于大气环境,且有明显的点腐蚀现象发生,钢中未溶的NbC相会促进点腐蚀现象的发生。

Customized scaffolds for large bone defects using 3D‑printed modular blocks from 2D‑medical images

Additive manufacturing(AM)has revolutionized the design and manufacturing of patient-specific,three-dimensional(3D),complex porous structures known as scaffolds for tissue engineering applications.The use of advanced image acquisition techniques,image processing,and computer-aided design methods has enabled the precise design and additive manufacturing of anatomically correct and patient-specific implants and scaffolds.However,these sophisticated techniques can be timeconsuming,labor-intensive,and expensive.Moreover,the necessary imaging and manufacturing equipment may not be readily available when urgent treatment is needed for trauma patients.In this study,a novel design and AM methods are proposed for the development of modular and customizable scaffold blocks that can be adapted to fit the bone defect area of a patient.These modular scaffold blocks can be combined to quickly form any patient-specific scaffold directly from two-dimensional(2D)medical images when the surgeon lacks access to a 3D printer or cannot wait for lengthy 3D imaging,modeling,and 3D printing during surgery.The proposed method begins with developing a bone surface-modeling algorithm that reconstructs a model of the patient’s bone from 2D medical image measurements without the need for expensive 3D medical imaging or segmentation.This algorithm can generate both patient-specific and average bone models.Additionally,a biomimetic continuous path planning method is developed for the additive manufacturing of scaffolds,allowing porous scaffold blocks with the desired biomechanical properties to be manufactured directly from 2D data or images.The algorithms are implemented,and the designed scaffold blocks are 3D printed using an extrusion-based AM process.Guidelines and instructions are also provided to assist surgeons in assembling scaffold blocks for the self-repair of patient-specific large bone defects.

Corneal collagen cross-linking in patients with keratoconus from the Dresden protocol to customized solutions:theoretical basis

Keratoconus is an ectatic condition characterized by gradual corneal thinning,corneal protrusion,progressive irregular astigmatism,corneal fibrosis,and visual impairment.The therapeutic options regarding improvement of visual function include glasses or soft contact lenses correction for initial stages,gas-permeable rigid contact lenses,scleral lenses,implantation of intrastromal corneal ring or corneal transplants for most advanced stages.In keratoconus cases showing disease progression corneal collagen crosslinking(CXL)has been proven to be an effective,minimally invasive and safe procedure.CXL consists of a photochemical reaction of corneal collagen by riboflavin stimulation with ultraviolet A radiation,resulting in stromal crosslinks formation.The aim of this review is to carry out an examination of CXL methods based on theoretical basis and mathematical models,from the original Dresden protocol to the most recent developments in the technique,reporting the changes proposed in the last 15y and examining the advantages and disadvantages of the various treatment protocols.Finally,the limits of non-standardized methods and the perspectives offered by a customization of the treatment are highlighted.

Building Custom Spreadsheet Functions with Python: End-User Software Engineering Approach

End-user computing empowers non-developers to manage data and applications, enhancing collaboration and efficiency. Spreadsheets, a prime example of end-user programming environments widely used in business for data analysis. However, Excel functionalities have limits compared to dedicated programming languages. This paper addresses this gap by proposing a prototype for integrating Python’s capabilities into Excel through on-premises desktop to build custom spreadsheet functions with Python. This approach overcomes potential latency issues associated with cloud-based solutions. This prototype utilizes Excel-DNA and IronPython. Excel-DNA allows creating custom Python functions that seamlessly integrate with Excel’s calculation engine. IronPython enables the execution of these Python (CSFs) directly within Excel. C# and VSTO add-ins form the core components, facilitating communication between Python and Excel. This approach empowers users with a potentially open-ended set of Python (CSFs) for tasks like mathematical calculations, statistical analysis, and even predictive modeling, all within the familiar Excel interface. This prototype demonstrates smooth integration, allowing users to call Python (CSFs) just like standard Excel functions. This research contributes to enhancing spreadsheet capabilities for end-user programmers by leveraging Python’s power within Excel. Future research could explore expanding data analysis capabilities by expanding the (CSFs) functions for complex calculations, statistical analysis, data manipulation, and even external library integration. The possibility of integrating machine learning models through the (CSFs) functions within the familiar Excel environment.

Omni-Channel Retailing and Firm Performance from a Customer Lifetime Value Perspective

In the digital era,retailers are keen to find out whether omni-channel retailing helps improve long-term firm performance.In this paper,we employ machine learning techniques on a large consumption data set in order to measure customer lifetime value(CLV)as the basis for determining long-term firm performance,and we provide an empirical analysis of the relationship between omni-channel retailing and CLV.The results suggest that omni-channel retailing may effectively enhance CLV.Further analysis reveals that this process is influenced by heterogeneous consumer requirements and that significant differences exist in the extent to which the omni-channel transition may influence CLV depending on consumer preferences for diversity of commodities,sensitivity to the cost of contract performance,and sensitivity to warehousing costs.Hence,retailers should provide consumers with a complete portfolio of goods and services based on target consumers’heterogeneous requirements in order to increase omni-channel efficiency.

Ethnic Customs and Rural Tourism Development in Xinbin Manchu Autonomous County of Fushun City

The development of ethnic minority tourism is currently a hot topic in domestic tourism development.As an important component of Chinese civilization,the Manchu people have created brilliant culture in the long river of historical development.As the hometown of the Manchu people,Fushun has unique folk cultural tourism resources and a strong ethnic flavor.Nowadays,under the promotion of the rural revitalization strategy,the construction of new rural areas is constantly developing,and rural tourism is gradually becoming a new industry.Therefore,in the context of the increasingly prosperous rural tourism industry,it has become increasingly important to combine the ethnic customs of Manchu culture with rural tourism.Taking the ethnic customs and integrated development of rural tourism in Xinbin Manchu Autonomous County of Fushun City,Liaoning Province as the research object,this paper mainly sorts out the current situation and characteristics of rural tourism development in the region,systematically explores the problems in development and how to further optimize development,and proposes new models suitable for the development of folk tourism in Xinbin of Fushun,in order to achieve maximum economic and social benefits and provide a reference for promoting the development of tourism in the region.

The User Analysis of Amazon Using Artificial Intelligence at Customer Churn

Customer churns remains a key focus in this research, using artificial intelligence-based technique of machine learning. Research is based on the feature-based analysis four main features were used that are selected on the basis of our customer churn to deduct the meaning full analysis of the data set. Data-set is taken from the Kaggle that is about the fine food review having more than half a million records in it. This research remains on feature based analysis that is further concluded using confusion matrix. In this research we are using confusion matrix to conclude the customer churn results. Such specific analysis helps e-commerce business for real time growth in their specific products focusing more sales and to analyze which product is getting outage. Moreover, after applying the techniques, Support Vector Machine and K-Nearest Neighbour perform better than the random forest in this particular scenario. Using confusion matrix for obtaining the results three things are obtained that are precision, recall and accuracy. The result explains feature-based analysis on fine food reviews, Amazon at customer churn Support Vector Machine performed better as in overall comparison.

The Customer Requirements Analysis Method of Engineering Products Based on Multiple Preference Information

To effectively evaluate the fuzziness of the market environment in product planning,a customer requirements analysis method based on multiple preference information is proposed.Firstly,decision-makers use a preferred information form to evaluate the importance of each customer requirement.Secondly,a transfer function is employed to unify various forms of preference information into a fuzzy complementary judgment matrix.The ranking vector is then calculated using row and normalization methods,and the initial importance of customer requirements is obtained by aggregating the weights of decision members.Finally,the correction coefficients of initial importance and each demand are synthesized,and the importance of customer requirements is determined through normalization.The development example of the PE jaw crusher demonstrates the effectiveness and feasibility of the proposed method.

A Custom Manipulator for Dental Implantation Through Model-Based Design

This paper presents a Model-Based Design(MBD)approach for the design and control of a customized manipulator intended for drilling and position-ing of dental implants accurately with minimal human intervention.While performing an intra-oral surgery for a prolonged duration within a limited oral cavity,the tremor of dentist's hand is inevitable.As a result,wielding the drilling tool and inserting the dental implants safely in accurate position and orientation is highly challenging even for experienced dentists.Therefore,we introduce a customized manipulator that is designed ergonomically by taking in to account the dental chair specifications and anthropomorphic data such that it can be readily mounted onto the existing dental chair.The manipulator can be used to drill holes for dental inserts and position them with improved accuracy and safety.Further-more,a thorough multi-body motion analysis of the manipulator was carried out by creating a virtual prototype of the manipulator and simulating its controlled movements in various scenarios.The overall design was prepared and validated in simulation using Solid works,MATLAB and Simulink through Model Based Design(MBD)approach.The motion simulation results indicate that the manipulator could be built as a prototype readily.

A biomimetic nanoplatform for customized photothermal therapy of HNSCC evaluated on patient-derived xenograft models

Cancer cell membrane(CCM)derived nanotechnology functionalizes nanoparticles(NPs)to recognize homologous cells,exhibiting translational potential in accurate tumor therapy.However,these nanoplatforms are majorly generated from fixed cell lines and are typically evaluated in cell line-derived subcutaneous-xenografts(CDX),ignoring the tumor heterogeneity and differentiation from inter-and intra-individuals and microenvironments between heterotopic-and orthotopic-tumors,limiting the therapeutic efficiency of such nanoplatforms.Herein,various biomimetic nanoplatforms(CCM-modified gold@Carbon,i.e.,Au@C-CCM)were fabricated by coating CCMs of head and neck squamous cell carcinoma(HNSCC)cell lines and patient-derived cells on the surface of Au@C NP.The generated Au@C-CCMs were evaluated on corresponding CDX,tongue orthotopic xenograft(TOX),immunecompetent primary and distant tumor models,and patient-derived xenograft(PDX)models.The Au@C-CCM generates a photothermal conversion efficiency up to 44.2% for primary HNSCC therapy and induced immunotherapy to inhibit metastasis via photothermal therapy-induced immunogenic cell death.The homologous CCM endowed the nanoplatforms with optimal targeting properties for the highest therapeutic efficiency,far above those with mismatched CCMs,resulting in distinct tumor ablation and tumor growth inhibition in all four models.This work reinforces the feasibility of biomimetic NPs combining modular designed CMs and functional cores for customized treatment of HNSCC,can be further extended to other malignant tumors therapy.

Novel Early-Warning Model for Customer Churn of Credit Card Based on GSAIBAS-Cat Boost

As the banking industry gradually steps into the digital era of Bank 4.0,business competition is becoming increasingly fierce,and banks are also facing the problem of massive customer churn.To better maintain their customer resources,it is crucial for banks to accurately predict customers with a tendency to churn.Aiming at the typical binary classification problem like customer churn,this paper establishes an early-warning model for credit card customer churn.That is a dual search algorithm named GSAIBAS by incorporating Golden Sine Algorithm(GSA)and an Improved Beetle Antennae Search(IBAS)is proposed to optimize the parameters of the CatBoost algorithm,which forms the GSAIBAS-CatBoost model.Especially,considering that the BAS algorithm has simple parameters and is easy to fall into local optimum,the Sigmoid nonlinear convergence factor and the lane flight equation are introduced to adjust the fixed step size of beetle.Then this improved BAS algorithm with variable step size is fused with the GSA to form a GSAIBAS algorithm which can achieve dual optimization.Moreover,an empirical analysis is made according to the data set of credit card customers from Analyttica official platform.The empirical results show that the values of Area Under Curve(AUC)and recall of the proposedmodel in this paper reach 96.15%and 95.56%,respectively,which are significantly better than the other 9 common machine learning models.Compared with several existing optimization algorithms,GSAIBAS algorithm has higher precision in the parameter optimization for CatBoost.Combined with two other customer churn data sets on Kaggle data platform,it is further verified that the model proposed in this paper is also valid and feasible.

COVID-19 Detection Based on 6-Layered Explainable Customized Convolutional Neural Network

This paper presents a 6-layer customized convolutional neural network model(6L-CNN)to rapidly screen out patients with COVID-19 infection in chest CT images.This model can effectively detect whether the target CT image contains images of pneumonia lesions.In this method,6L-CNN was trained as a binary classifier using the dataset containing CT images of the lung with and without pneumonia as a sample.The results show that the model improves the accuracy of screening out COVID-19 patients.Compared to othermethods,the performance is better.In addition,the method can be extended to other similar clinical conditions.

Customer Churn Prediction Framework of Inclusive Finance Based on Blockchain Smart Contract

In view of the fact that the prediction effect of influential financial customer churn in the Internet of Things environment is difficult to achieve the expectation,at the smart contract level of the blockchain,a customer churn prediction framework based on situational awareness and integrating customer attributes,the impact of project hotspots on customer interests,and customer satisfaction with the project has been built.This framework introduces the background factors in the financial customer environment,and further discusses the relationship between customers,the background of customers and the characteristics of pre-lost customers.The improved Singular Value Decomposition(SVD)algorithm and the time decay function are used to optimize the search and analysis of the characteristics of pre-lost customers,and the key index combination is screened to obtain the data of potential lost customers.The framework will change with time according to the customer’s interest,adding the time factor to the customer churn prediction,and improving the dimensionality reduction and prediction generalization ability in feature selection.Logistic regression,naive Bayes and decision tree are used to establish a prediction model in the experiment,and it is compared with the financial customer churn prediction framework under situational awareness.The prediction results of the framework are evaluated from four aspects:accuracy,accuracy,recall rate and F-measure.The experimental results show that the context-aware customer churn prediction framework can be effectively applied to predict customer churn trends,so as to obtain potential customer data with high churn probability,and then these data can be transmitted to the company’s customer service department in time,so as to improve customer churn rate and customer loyalty through accurate service.

Multi-Objective Cold Chain Path Optimization Based on Customer Satisfaction

To improve customer satisfaction of cold chain logistics of fresh agricultural goods enterprises and reduce the comprehensive distribution cost composed of fixed cost, transportation cost, cargo damage cost, refrigeration cost, and time penalty cost, a multi-objective path optimization model of fresh agricultural products distribution considering client satisfaction is constructed. The model is solved using an enhanced Elitist Non-dominated Sorting Genetic Algorithm (NSGA-II), and differential evolution is incorporated to the evolution operator. The algorithm produced by the revised algorithm produces a better Pareto optimum solution set, efficiently balances the relationship between customer pleasure and cost, and serves as a reference for the long-term growth of organizations. .

Research on the Value Positioning of University Library Based on Customer Delivered Value

With the rise of various new reading media and the rapid development of the digitization of paper resources,the traditional function positioning of university libraries based on information query is facing unprecedented challenges.How to deal with the change of social information?The library should be demand-oriented,re-examine its own value and find a new starting point.With the help of the concept of customer delivered value and based on 4P theory,this paper constructs the value chain of university library from the dimensions of product,image,personnel and service,and forms a multi-dimensional development positioning system.

“New Regulations”born regarding the pilot customized cosmetics

On April 10th,2023,Shanghai Medical Products Administration released a notice on publicly asking for opinions about Rules for the On-site Personalized Service Examination of Ordinary Cosmetics of Shanghai Pudong New Area(Trial)(exposure draft).This notice mainly explained the targeted group,purpose of release,condition of applying for filing,rules which organizations and relevant people should obey,quality administration system of personalized cosmetics.

Effective Customer Review Analysis Using Combined Capsule Networks with Matrix Factorization Filtering

Nowadays,commercial transactions and customer reviews are part of human life and various business applications.The technologies create a great impact on online user reviews and activities,affecting the business process.Customer reviews and ratings are more helpful to the new customer to purchase the product,but the fake reviews completely affect the business.The traditional systems consume maximum time and create complexity while analyzing a large volume of customer information.Therefore,in this work optimized recommendation system is developed for analyzing customer reviews with minimum complexity.Here,Amazon Product Kaggle dataset information is utilized for investigating the customer review.The collected information is analyzed and processed by batch normalized capsule networks(NCN).The network explores the user reviews according to product details,time,price purchasing factors,etc.,ensuring product quality and ratings.Then effective recommendation system is developed using a butterfly optimized matrix factorizationfiltering approach.Then the system’s efficiency is evaluated using the Rand Index,Dunn index,accuracy,and error rate.

旅游短视频营销对顾客融入的影响机制研究

以SIPS(sympathize-identify-participate-spread)模型为基础,对417名旅游短视频观看者进行问卷调查,通过实证研究构建旅游短视频营销对顾客融入的影响机制模型,旨在探索旅游目的地形象宣传的新方向和旅游短视频创作重点。研究发现:旅游短视频营销从传播内容、传播场景和传播主体3个方面正向影响顾客融入,顾客灵感具有部分中介作用;关系强度正向调节旅游短视频营销与顾客灵感的关系,旅游短视频营销通过顾客灵感正向影响顾客融入的间接效应,在高关系强度条件下更强烈。

服装个性化定制中信息技术的应用与展望

随着人们个性化需求的不断增加,服装个性化定制已成为时尚发展趋势之一。信息技术在推动服装个性化定制发展中扮演着重要的角色,可以收集和处理用户的个性化信息,并将其转化为具体的设计和生产方案。文章首先对服装产业信息技术的研究进展进行总结,阐述新一代信息技术在服装产业的应用情况;其次分析了信息技术在服装个性化定制领域的应用现状,按照定制流程分别总结信息技术在提高生产效率、降低成本和满足用户需求方面的优势及不足;最后根据目前服装个性化定制在数据共享、协同设计和柔性生产等方面的需求,从建模技术和系统平台构建两个方面对服装个性化定制发展进行展望。

Customer Segment Prediction on Retail Transactional Data Using K-Means and Markov Model

Retailing is a dynamic business domain where commodities and goods are sold in small quantities directly to the customers.It deals with the end user customers of a supply-chain network and therefore has to accommodate the needs and desires of a large group of customers over varied utilities.The volume and volatility of the business makes it one of the prospectivefields for analytical study and data modeling.This is also why customer segmentation drives a key role in multiple retail business decisions such as marketing budgeting,customer targeting,customized offers,value proposition etc.The segmentation could be on various aspects such as demographics,historic behavior or preferences based on the use cases.In this paper,historic retail transactional data is used to segment the custo-mers using K-Means clustering and the results are utilized to arrive at a transition matrix which is used to predict the cluster movements over the time period using Markov Model algorithm.This helps in calculating the futuristic value a segment or a customer brings to the business.Strategic marketing designs and budgeting can be implemented using these results.The study is specifically useful for large scale marketing in domains such as e-commerce,insurance or retailers to segment,profile and measure the customer lifecycle value over a short period of time.