In consideration of the uncertainty of basic events failure rate and lack of probability statistical information in fault tree analysis( FTA) of excavator variable-frequency speed control system, the interval theory w...In consideration of the uncertainty of basic events failure rate and lack of probability statistical information in fault tree analysis( FTA) of excavator variable-frequency speed control system, the interval theory was employed and combined with conventional FTA method. The basic events failure probabilities were described by interval numbers,and the interval operators of logical gates in FTA were deduced based on interval theory. Finally,the reliability assessment of excavator variable-frequency speed control system was done by interval FTA method. The result shows that the interval FTA method is suitable for the complex system with insufficient failure data.展开更多
CNC machine tool is a large complex system which contains both mechanical and electrical components.As one of these components,the spindle is crucial for the performance of CNC machine tool.To improve the quality of C...CNC machine tool is a large complex system which contains both mechanical and electrical components.As one of these components,the spindle is crucial for the performance of CNC machine tool.To improve the quality of CNC machine,the reliability of spindle was evaluated in this paper using a fault tree analysis(FTA)method.The FTA method is a set of calculation methods based on Boolean algebra.However,it is difficult to analyze a large and complex fault tree with inaccurate results and low efficiency as well as the complexity of time and space.Both of them will result in the so-called "combinatorial explosion".To overcome this problem,the analysis method based on binary decision diagram(BDD)was introduced in our works,and a sorting method about bottom events was also recommended which can reduce the size of the BDD effectively.展开更多
Smart grid was proposed as a practical form of future power distribution system. Evaluating the reliability of smart grids was of great importance and significance. A revised fault tree model was proposed to distingui...Smart grid was proposed as a practical form of future power distribution system. Evaluating the reliability of smart grids was of great importance and significance. A revised fault tree model was proposed to distinguish and separate grid-connected operation mode and islanded operation mode of smart grids,focusing on the perspective of the consumers. A hierarchical Monte Carlo simulation method for reliability evaluation was also proposed based on the proposed fault tree model. A case of reliability evaluation for the future renewable electric energy delivery and management( FREEDM) system was carried out and analyzed. The proposed methods can be applicable to other forms of smart grids.展开更多
为了分析机场跑道侵入的影响因素,更有针对性地对预防机场跑道侵入提出合理建议,结合相关信息通告中统计的数据,首先从人员因素、环境因素、设备因素和管理因素4个方面分析跑道侵入的事故成因,并建立了故障树(Fault Tree Analysis,FTA)...为了分析机场跑道侵入的影响因素,更有针对性地对预防机场跑道侵入提出合理建议,结合相关信息通告中统计的数据,首先从人员因素、环境因素、设备因素和管理因素4个方面分析跑道侵入的事故成因,并建立了故障树(Fault Tree Analysis,FTA)模型和贝叶斯网络(Bayesian Network,BN)模型,然后利用软件Netica对贝叶斯网络模型进行了后验概率推理与敏感性分析,最后根据分析结果提出了相应的建议。结果表明,人员因素影响程度最大,其次是管理因素,而环境因素和设备因素的影响程度相对偏小。展开更多
The unmanned aerial vehicles( UAV) has been becoming more and more important in the aviation industry.Despite the superior performance and advanced technology,major accident of UAV happens frequently due to the impact...The unmanned aerial vehicles( UAV) has been becoming more and more important in the aviation industry.Despite the superior performance and advanced technology,major accident of UAV happens frequently due to the impact of their systems,long distance of remote control and skill of manipulator technology.According to the application of engineering application,failure mode effects and criticality analysis( FMECA),failure reporting analysis and corrective action comprehensive analysis systems( FRACAS)and fault tree analysis( FTA)( 3 F) were combined.And also a set of user-friendly,more time,more efficient and accurate reliability analysis system were explored.展开更多
针对传统Petri网(P/T系统)无法根据后继标识确定系统失效部位的问题,采用着色Petri网(Colored Petri Net,CPN)建立动车组列控车载子系统的故障传播模型。首先,通过CPN与传统Petri网理论的对比说明采用CPN建模的可行性。其次,根据车载子...针对传统Petri网(P/T系统)无法根据后继标识确定系统失效部位的问题,采用着色Petri网(Colored Petri Net,CPN)建立动车组列控车载子系统的故障传播模型。首先,通过CPN与传统Petri网理论的对比说明采用CPN建模的可行性。其次,根据车载子系统的结构组成及工作模式建立故障树模型,并通过Petri网描述故障树逻辑门事件之间的逻辑关系,给出故障树的Petri网表示方法,建立车载子系统的P/T系统模型;进一步根据CPN理论确定托肯染色方法、权函数等模型参数,将P/T系统转化为着色网系统,并举例说明后继标识的计算规则。最后,通过与传统Petri网推理及故障识别过程的对比,证明了采用CPN分析系统故障机理的正确性及在故障识别过程中的高效性。所提方法可为车载子系统的故障识别提供一定依据。展开更多
基金National High-Tech Research and Development Program(863 Program),China(No.2012AA062001)
文摘In consideration of the uncertainty of basic events failure rate and lack of probability statistical information in fault tree analysis( FTA) of excavator variable-frequency speed control system, the interval theory was employed and combined with conventional FTA method. The basic events failure probabilities were described by interval numbers,and the interval operators of logical gates in FTA were deduced based on interval theory. Finally,the reliability assessment of excavator variable-frequency speed control system was done by interval FTA method. The result shows that the interval FTA method is suitable for the complex system with insufficient failure data.
基金National Science and Technology Major Project of China(No.2013ZX04013-011)
文摘CNC machine tool is a large complex system which contains both mechanical and electrical components.As one of these components,the spindle is crucial for the performance of CNC machine tool.To improve the quality of CNC machine,the reliability of spindle was evaluated in this paper using a fault tree analysis(FTA)method.The FTA method is a set of calculation methods based on Boolean algebra.However,it is difficult to analyze a large and complex fault tree with inaccurate results and low efficiency as well as the complexity of time and space.Both of them will result in the so-called "combinatorial explosion".To overcome this problem,the analysis method based on binary decision diagram(BDD)was introduced in our works,and a sorting method about bottom events was also recommended which can reduce the size of the BDD effectively.
文摘Smart grid was proposed as a practical form of future power distribution system. Evaluating the reliability of smart grids was of great importance and significance. A revised fault tree model was proposed to distinguish and separate grid-connected operation mode and islanded operation mode of smart grids,focusing on the perspective of the consumers. A hierarchical Monte Carlo simulation method for reliability evaluation was also proposed based on the proposed fault tree model. A case of reliability evaluation for the future renewable electric energy delivery and management( FREEDM) system was carried out and analyzed. The proposed methods can be applicable to other forms of smart grids.
文摘为了分析机场跑道侵入的影响因素,更有针对性地对预防机场跑道侵入提出合理建议,结合相关信息通告中统计的数据,首先从人员因素、环境因素、设备因素和管理因素4个方面分析跑道侵入的事故成因,并建立了故障树(Fault Tree Analysis,FTA)模型和贝叶斯网络(Bayesian Network,BN)模型,然后利用软件Netica对贝叶斯网络模型进行了后验概率推理与敏感性分析,最后根据分析结果提出了相应的建议。结果表明,人员因素影响程度最大,其次是管理因素,而环境因素和设备因素的影响程度相对偏小。
基金Naional Natural Science Foundntion of China(No.71761030)
文摘The unmanned aerial vehicles( UAV) has been becoming more and more important in the aviation industry.Despite the superior performance and advanced technology,major accident of UAV happens frequently due to the impact of their systems,long distance of remote control and skill of manipulator technology.According to the application of engineering application,failure mode effects and criticality analysis( FMECA),failure reporting analysis and corrective action comprehensive analysis systems( FRACAS)and fault tree analysis( FTA)( 3 F) were combined.And also a set of user-friendly,more time,more efficient and accurate reliability analysis system were explored.
文摘针对传统Petri网(P/T系统)无法根据后继标识确定系统失效部位的问题,采用着色Petri网(Colored Petri Net,CPN)建立动车组列控车载子系统的故障传播模型。首先,通过CPN与传统Petri网理论的对比说明采用CPN建模的可行性。其次,根据车载子系统的结构组成及工作模式建立故障树模型,并通过Petri网描述故障树逻辑门事件之间的逻辑关系,给出故障树的Petri网表示方法,建立车载子系统的P/T系统模型;进一步根据CPN理论确定托肯染色方法、权函数等模型参数,将P/T系统转化为着色网系统,并举例说明后继标识的计算规则。最后,通过与传统Petri网推理及故障识别过程的对比,证明了采用CPN分析系统故障机理的正确性及在故障识别过程中的高效性。所提方法可为车载子系统的故障识别提供一定依据。
