Nondestructive technique for identifying nuclides using neutron resonance transmission analysis at CSNS Back-n

Nondestructive and noninvasive neutron assays are essential applications of neutron techniques.Neutron resonance transmission analysis(NRTA)is a powerful nondestructive method for investigating the elemental composition of an object.The back-streaming neutron line(Back-n)is a newly built time-of-flight facility at the China Spallation Neutron Source(CSNS)that provides neutrons in the eV to 300 MeV range.A feasibility study of the NRTA method for nuclide identification was conducted at the CSNS Back-n via two test experiments.The results demonstrate that it is feasible to identify different elements and isotopes in samples using the NRTA method at Back-n.This study reveals its potential future applications.

Efficient and selective extraction of uranium from seawater based on a novel pulsed liquid chromatography radionuclide separation method

The novel pulsed liquid chromatography radionuclide separation method presented here provides a new and promising strategy for the extraction of uranium from seawater.In this study,a new chromatographic separation method was proposed,and a pulsed nuclide automated separation device was developed,alongside a new chromatographic column.The length of this chromatographic column was 10 m,with an internal warp of 3 mm and a packing size of 1 mm,while the total separation units of the column reached 12,250.The most favorable conditions for the separation of nuclides were then obtained through optimizing the separation conditions of the device:Sample pH in the column=2,sample injection flow rate=5.698 mL/min,chromatographic column heating temperature=60℃.Separation experiments were also carried out for uranium,europium,and sodium ions in mixed solutions;uranium and sodium ions in water samples from the Ganjiang River;and uranium,sodium,and magnesium ions from seawater samples.The separation factors between the different nuclei were then calculated based on the experimental data,and a formula for the separation level was derived.The experimental results showed that the separation factor in the mixed solution of uranium and europium(1:1)was 1.088,while achieving the initial separation of uranium and europium theoretically required a 47-stage separation.Considering the separation factor of 1.50for the uranium and sodium ions in water samples from the Ganjiang River,achieving the initial separation of uranium and sodium ions would have theoretically required at least a 21-stage separation.Furthermore,for the seawater sample separation experiments,the separation factor of uranium and sodium ions was 1.2885;therefore,more than 28 stages of sample separation would be required to achieve uranium extraction from seawater.The novel pulsed liquid chromatography method proposed in this study was innovative in terms of uranium separation and enrichment,while expanding the possibilities of extracting uranium from seawater through chromatography.

Determining topographic shielding from digital elevation models for cosmogenic nuclide analysis: a GIS model for discrete sample sites

Topographic shielding(TS) is an important factor in cosmogenic nuclide surface exposure dating. The development of geographic information systems(GIS) and the availability of digital elevation models(DEMs) make it possible to derive this factor directly from a DEM. Most available GIS models derive the TS factors for an area(all cells in a DEM) without the consideration of surface conditions of individual sites, such as the strike, dip,and height above ground, into the calculation. This paper presents a new GIS model to derive the TS factors for discrete sample sites. This model uses the Skyline and Skyline Graph functions in ArcGIS to extract the set of azimuth and elevation angles of topographic obstructions around each site from a DEM(considering the sample height above ground)and then incorporates the strike and dip information of the sample surface to derive the TS factor. All processing tools and steps are streamlined in ArcGIS modelbuilder and this model can be run like a standard ArcGIS geoprocessing tool. It provides an easy and user-friendly means to derive the TS factors for discrete samples based on a DEM and the measured strike, dip and sample height for each site.

Determining Topographic Shielding from Digital Elevation Models for Cosmogenic Nuclide Analysis:a GIS Approach and Field Validation

Topographic shielding of cosmic radiation flux is a key parameter in using cosmogenic nuclides to determine surface exposure ages or erosion rates. Traditionally, this parameter is measured in the field and uncertainty and/or inconsistency may exist among different investigators. This paper provides an ArcGIS python code to determine topographic shielding factors using digital elevation models （DEMs）. This code can be imported into ArcGIS as a geoprocessing tool with a user-friendly graphical interface. The DEM-derived parameters using this method were validated with field measurements in central Tian Shan. Results indicate that DEM-derived shielding factors are consistent with field-measured values. It provides a valuable tool to save fieldwork efforts and has the potential to provide consistent results for different regions in the world to facilitate the comparison of cosmogenie nuclide results.

Comparative Proteomic Analysis of Human Benign Prostatic Hyperplastic Tissue Before and After Irradiation with Radioactive Nuclide

The expressed proteins were extracted from human benign prostatic hyperplastic tissues obtained with transurethral resection of the prostate before and after their irradiation with radioactive nuclide. The proteins were separated by two-dimensional gel electrophoresis and analyzed by mass spectrometry. Four proteins were differentially expressed and were identified with a database search. Three were associated with the regulation of cell motion and one was lactate dehydrogenase B, which plays an important role in the process of cell energy metabolism and cell state changes in tissue. The comparative proteomic analysis indicates that after irradiation with radioactive nuclide, changes occur in human benign prostatic hyperplastic cells, and associated proteins are expressed. Analysis of these proteins should help to identify the mechanism involved when human prostatic hyperplasia is treated by irradiation with radioactive nuclide.

Fast nuclide identification based on a sequential Bayesian method

The rapid identification of radioactive substances in public areas is crucial.However,traditional nuclide identification methods only consider information regarding the full energy peaks of the gamma-ray spectrum and require long recording times,which lead to long response times.In this paper,a novel identification method using the event mode sequence(EMS)information of target radionuclides is proposed.The EMS of a target radionuclide and natural background radiation were established as two different probabilistic models and a decision function based on Bayesian inference and sequential testing was constructed.The proposed detection scheme individually processes each photon.When a photon is detected and accepted,the corresponding posterior probability distribution parameters are estimated using Bayesian inference and the decision function is updated.Then,value of the decision function is compared to preset detection thresholds to obtain a detection result.Experiments on different target radionuclides(137Cs and 60Co)were performed.The count rates of the regions of interest(ROI)in the backgrounds between[651,671],[1154,1186],and[1310,1350]keV were 2.35,5.14,and 0.57 CPS,respectively.The experimental results demonstrate that the average detection time was 6.0 s for 60Co(with an activity of 80400 Bq)at a distance of 60 cm from the detector.The average detection time was 7 s for 137Cs(with an activity of 131000 Bq)at a distance of 90 cm from the detector.The results demonstrate that the proposed method can detect radioactive substances with low activity.

Numerical modeling of deep-seated landslides interacting with man-made structures

This paper describes the interaction between deep-seated landslides and man-made structures such as dams, penstocks, viaducts, and tunnels. Selected case studies are reported first with the intent to gain insights into the complexities associated with the interaction of these structures with deep-seated landslides(generally referred to as deep-seated gravity slope deformations, DSGSDs). The main features, which characterize these landslides, are mentioned together with the interaction problems encountered in each case. Given the main objective of this paper, the numerical modeling methods adopted are outlined as means for increase in the understanding of the interaction problems being investigated. With the above in mind, the attention moves to an important and unique case history dealing with the interaction of a large-size twin-tunnel excavated with an earth pressure balance(EPB)tunnel boring machine(TBM) and a deep-seated landslide, which was reactivated due to the stress changes induced by tunnel excavation in landslide shear zone. The geological and geotechnical conditions are described together with the available monitoring data on the landslide movements, based on the advanced and conventional monitoring tools used. Numerical modeling is illustrated as an aid to back-analyze the monitored surface and subsurface deformations and to assist in finding the appropriate engineering solution for putting the tunnel into service and as a follow-up means for future understanding and control of the interaction problems. The simulation is based on a novel time-dependent model representing the landslide behavior.

DEPTH PROFILING OF RADIOACTIVE NUCLIDES IN SOIL

Analyses of 114 soil samples in Ningbo City show that,in general,there are statistical differences of 137Cs and 40K contents between every layers,the other kinds of natural radionuclides present an increasing tendency with depth.When the γ radiation dose rate is estimated by Beck Formula,owing to the effect of those nonuniform distributions is less than 1% and can be ignored.'

Simulation of experimental spectra for medium-heavy nuclides in accelerator mass spectrometry

Some interferences are often encountered in accelerator mass spectrometry (AMS) measurements, espe-cially for medium-heavy nuclide measurement. It is difficult for online discrimination of the nuclide of interest from the interfering ones. In order to solve this problem, we developed a method to simulate the experimental spectra of medium-heavy nuclides in AMS measurements. The results obtained from this method are in good agreement with experimental values.

Considering and comparing regeneration in natural and man-made stands in northern Iran

In this study the regeneration diversity of Syahkal forests afforestated and natural stands in north of Iran was studied and compared from the point of view of evenness and diversity index. In order to accomplish this study two natural and man-made stands that almost are located in the same height above the sea level were chosen. The area of each stand was 30 ha and the inventory was done by the random-systematic method with a 5R land measurement （500 m2） selected. Also, in order to study the regeneration in the center of each sample piece 125 square meters micro plots were formed. The results show that regeneration diversity index in natural stands is more than that in man-made stands which in this case Mc-Arthur index with 2.41 has the most amount while Simpson index with 0.543 has the least amount. But the evenness indexes in man-made stands are more than that in natural stand which the main reason is the purity of the man-made stand.

Experimental Results on Excess Heat Power, Impurity Nuclides and X-Ray Production in Experiments with a High-Voltage Electric Discharge System

It reviewed results on low-energy nuclear reaction （LENR） processes in a high-voltage （1,000-4,000 V） electric discharge system. The experimental results are divided into three sets： excess heat measurements; yield of impurity nuclides （nuclear ash）; X-ray measurements. Up to 8 W of excess power was observed, with a power gain of up to 170% was seen in glow discharge experiments. Up to 300 W of excess power, with a power gain up to 340% was observed in experiments using a high-voltage electrolysis cell. The impurity nuclide yield showing a shift of up to a few per cent from natural isotopic abundances was detected by spark mass spectrometry, by secondary ionic mass spectrometry, and by secondary neutral mass spectrometry. X-ray emission in the range of 0.6-6.0 keV, has been observed. Based on these experimental results we propose a phenomenological model for LENR based on the interaction of an electric discharge with condensed matter （of the cathode）.

Predicting the Binding Energies of the 1s Nuclides with High Precision, Based on Baryons which Are Yang-Mills Magnetic Monopoles

In an earlier paper, the author employed the thesis that baryons are Yang-Mills magnetic monopoles and that proton and neutron binding energies are determined based on their up and down current quark masses to predict a relationship among the electron and up and down quark masses within experimental errors and to obtain a very accurate relationship for nuclear binding energies generally and for the binding of 56Fe in particular. The free proton and neutron were understood to each contain intrinsic binding energies which confine their quarks, wherein some or most (never all) of this energy is released for binding when they are fused into composite nuclides. The purpose of this paper is to further advance this thesis by seeing whether it can explain the specific empirical binding energies of the light 1s nuclides, namely, 2H, 3H, 3He and 4He, with high precision. As the method to achieve this, we show how these 1s binding energies are in fact the components of inner and outer tensor products of Yang-Mills matrices which are implicit in the expressions for these intrinsic binding energies. The result is that the binding energies for the 4He, 3He and 3H nucleons are respectively, independently, explained to less than four parts in one million, four parts in 100,000, and seven parts in one million, all in AMU. Further, we are able to exactly relate the neutron minus proton mass difference to a function of the up and down current quark masses, which in turn enables us to explain the 2H binding energy most precisely of all, to just over 8 parts in ten million. These energies have never before been theoretically explained with such accuracy, which leads to the conclusion that the underlying thesis provides the strongest theoretical explanation to date of what baryons are, and of how protons and neutrons confine their quarks and bind together into composite nuclides. As is also reviewed in Section 9, these results may lay the foundation for more easily catalyzing nuclear fusion energy release.

Residual Nuclides Induced in Cu Target by a 250 MeV Proton Beam

Residual nuclide production is studied experimentally by bombarding a Cu target with a 250 MeV proton beam. The data are measured by the off-line γ-spectroscopy method. Six nuclides are identified and their cross sections are determined. The corresponding calculated results by the MCNPX and GEANT4 codes are compared with the experimental data to check the validity of the codes. A comparison shows that the MCNPX simulation has a better agreement with the experiment. The energy dependence of residual nuclide production is studied with the aid of MCNPX simulation, and it is found that the mass yields for the nuclides in the light mass region increase significantly with the proton energy.

Existence of the fifth unstable nuclided series

ＥｘｉｓｔｅｎｃｅｏｆｔｈｅｆｉｆｔｈｕｎｓｔａｂｌｅｎｕｃｌｉｄｅｄｓｅｒｉｅｓＺｈａｎｇＪｉａ－Ｈｕａ（张家骅）（ＳｈａｎｇｈａｉＩｎｓｔｉｔｕｔｅｏｆＮｕｃｌｅａｒＲｅｓｅａｒｃｈ，ｔｈｅＣｈｉｎｅｓｅＡｃａｄｅｍｙｏｆＳｃｉｅｎｃｅｓ，Ｓｈａ...

5-1 Introduction to Code System COUPLE3.0 for Neutron Transport and Nuclides Burn-up Analyses

The code system COUPLE2.0[1] was developed by the Institute of Nuclear and New Energy Technology (INET) of Tsinghua University, which can be used for coupled neutron transport and nuclide burn-up analyses of Accelerator Driven sub- critical reactor System(ADS). The Institute of Modern Physics, Chinese Academy of Sciences imported the code system in 2014, and developed the version COUPLE3.0 according to the requirements of new function and preliminary verifications based on the fast reactor and ADS benchmarks were done.

Ecology and Fish Biodiversity of Man-Made Lakes of Southern Benin (West Africa): Implications for Species Conservation and Fisheries Management

Man-made lakes are alternative and potential habitats for biodiversity conservation, fisheries and extensive aquaculture. We investigated the ecology and the fish community structure of two (2) sand-dragged man-made lakes, Lake Ahozon and Lake Bewacodji of Southern Benin, with implications for species conservation, fisheries management and aquaculture valorization. From August 2014 to July 2015, habitats conditions were evaluated and fishes were sampled monthly with seine, cast net, experimental gill net and hooks in the open water and aquatic vegetation habitats of both lakes. Overall, the water quality of Lake Ahozon was globally favorable for the growth and the survival of the fish resources whereas Lake Bewacodji exhibited a poor water quality indicated mainly by an acid pH (mean: 6.32 ± 0.58) and low dissolved oxygen concentrations (mean: 3.52 ± 1.25 mg/l) caused by dense floating plants, Nymphea sp mainly and huge daily dumping of domestic wastes. The study revealed low species richness, d = 5.89 and d = 3.87, and low species diversity, H’ = 0.76 and H’ = 0.48 for Lakes Ahozon and Bewacodji, respectively, with Lake Ahozon more diverse than Lake Bewacodji. The fish community of Lake Ahozon comprised six (6) species, 3 cichlids Sarotherodon galilaeus, Oreochromis niloticus and Tilapia guineensis, the silver catfish, Chrysichthys nigrodigitatus (Claroteidae), the African bonytongue, Heterotis niloticus (Osteoglossidae), and the African catfish, Clarias gariepinus (Clariidae). Numerically, S. galilaeus dominated Lake Ahozon and made 85.21% of the sample. In Lake Bewacodji, the fish composition comprised four (4) species, Sarotherodon galilaeus multifasciatus, the dominant species making numerically 91.58% of the total sample, T. guineensis, C. gariepinus and C. nigrodigitatus. With regard to trophic structure, the fish assemblages of both lakes were numerically dominated by planktinovores/ detritivores, mainly S. galilaeus, O. niloticus, T. guineensis and C. nigrodigitatus making together 99.46% of Lake Ahozon fish community, and S. galilaeus multifasciatus, T. guineensis and C. nigrodigitatus accounting together for about 98.59% of Lake Bewacodji. In Lake Ahozon, standard length (SL) frequencies histograms showed an unimodal size distribution for H. niloticus, the nile tilapia O. niloticus and C. gariepinus whereas the two cichlids, S. galilaeus and T. guineensis exhibited a bimodal size distribution. In Lake Bewacodji, S. galilaeus multifasciatus, C. nigrodigitatus and C. gariepinus exhibited an unimodal size distribution. A sustainable exploitation of both man-made lakes requires the implementation of an integrated management scheme which should include habitat restoration and protection plan, fisheries/aquacultural valorization, ecological sound agriculture/ecotourism and environmental monitoring.

An Effective Method for Studying Heavy Neutron-Rich Nuclide

ＡｎＥｆｅｃｔｉｖｅＭｅｔｈｏｄｆｏｒＳｔｕｄｙｉｎｇＨｅａｖｙＮｅｕｔｒｏｎ┐ＲｉｃｈＮｕｃｌｉｄｅＷａｎｇＪｉｃｈｅｎｇ，ＧｕｏＧｕａｎｇｈｕｉ，ＺｈａｏＪｉｎｈｕａａｎｄＹａｎｇＹｏｎｇｆｅｎｇＩｎｓｔｉｔｕｔｅｏｆＭｏｄｅｒｎＰｈｙｓｉｃｓ，...

The 25th CIMFC(Bengbu 2019):Exploring the future of the man-made fibers

The 25th China International Man-made Fiber Conference (Bengbu 2019)(hereinafter referred to as CIMFC 2019), themed on “Opening and Integaration for Interactive Development — Coordinated Progress of Global Man-Made Fiber Industry”, was convened in Bengbu City, Anhui Province. CIMFC 2019 was sponcored by China National Textile and Apparel Council (CNTAC), organized by China Chemical Fibers Association, Chi-na Textile International Exchange Center, and China BBCA Group Corp., supported by Bengbu Municipal People’s Goverment, and co-organized by Bengbu Investment Promotion and Foreign cooperation Center, Bengbu Municipal Bureau of Commerce and Foreign Affairs, and Oerlikon Man-made Fiber.

Treatment Registration and Nuclide Decay Calculation System

Objective ：To design a software to do the complicated and multiple calculations automatically in routine internal radionuelide irradiation therapy to avoid mistakes and shorten patients waiting times. Methods：The software is designed on the Microsoft Windows XP operating system. Visual Basic 5.0 and Microsoft Access 2000 are used respectively as the programming language and database system here. The data and DBGrid controls and VB data window guide of Visual Basic were used to control access to and Access database. Results ： Not only can the radioactivity of any radionuelide be calculated, but also the administered total iodine dose of therapy for hyperthyroidism or thyroid cancer and the total administered 153Sm-EDTMP solutions for remedy of bone metastasis of malignant tumor can be ciphered out. Conclusion ：The work becomes easier, faster, more correct and interesting when the software can make the complicated and multiple calculations automatically. Patients＇ information, diagnosis and treatment can be recorded for further study.

MAN-MADE

名月背叛了虎帝大人，他要所有的新型M-M战士听命于他。于是，被博士利用变身药丸救出的流年他们决定要阻止名月。