GEOCHEMISTRY AND TECTONIC ENVIRONMENT AND RESERVOIR FORMATION OF MANTLE-DERIVED NATURAL GAS IN THE SONGLIAO BASIN, NORTHEASTERN CHINA

During several decades of exploration, a number of mantle-derived natural gas pools have been discovered in the vicinities of deep faults in the Songliao Basin, northeastern China. The natural gas in these pools has a δ13C1 value of ?16.50/00 to ?24.20/00, a reversed arrangement in the amount of carbon isotopes in methane and its endogamous products (namely, δ13C1 >δ13C2 >δ13C3 >δ13C4), a 3He/4He value of 1.97 to 2.34×10-6,and an Ar/36Ar value of 1063 to 1949. This indicates a mantle 40 source for the natural gas. The trace elements Cd, In, Te and Re, never found in organic-sourced hydrocarbons, are highly enriched in certain crude oils from the Basin; respectively, concentrations of these elements were found to be 751, 28, 16 and 323 times the average crustal values in China, and this also supports a mantle-derived natural gas origin. The characteristics of mantled-derived magmatic rocks, hydrothermal fluids and gaseous fractions distributed in and near the deep Songliao Basin faults indicate that rifting tectonics is providing the mechanisms for this outgassing of the mantle. Deep extensional (normal) faults provide pathways for upward movement of these materials, and in the Songliao Basin, these deep rift fault zones are associated with reservoir occurrence and cap rock seals, forming good sites for accumulation of mantle-derived natural gas. Furthermore, a layer of low velocity, low density and high conductivity in the deep crust has been identified as a potential reservoir for mantle-derived natural gas.

Complex Exploration Techniques for the Low-permeability Lithologic Gas Pool in the Upper Paleozoic of Ordos Basin

The Ordos basin is a stable craton whose late Paleozoic undergoes two sedimentary stages: from the middle- late Carboniferous offshore plain to the Permian continental river and lake delta. Sandstones in delta plain channels, delta-front river mouth bars and tidal channels are well developed. The sandstones are distributed on or between the genetic source rocks, forming good gas source conditions with widespread subtle lithologic gas pools of low porosity, low permeability, low pressure and low abundance. In recent years, a series of experiments has been done, aimed at overcoming difficulties in the exploration of lithologic gas pools. A set of exploration techniques, focusing on geological appraisal, seismic exploration, accurate logging evaluation and interpretation, well testing fracturing, has been developed to guide the exploration into the upper Paleozoic in the basin, leading to the discoveries of four large gas fields: Sulige, Yulin, Wushenqi and Mizhi.

A Study on the Ore-forming Effect of Mantle-derived Fluid

Based on summarizing of the effect of mantle-derived fluid on the formation of ores, especially on gold ore, and with the latest investigations, such as the formation of ore from the action of shallow-deep fluid, the transportation effect of the thermal energy by mantle-derived fluid, this paper mainly aims at the effect of mantle-derived fluid on the generation of hydrocarbons. With the proof from geochemistry and fluid inclusion, it was suggested that the mantle-derived fluid not only supplied source materials for hydrocarbons, but also supplied essential energy and matter necessary for the generation of hydrocarbons. The mantle-derived fluid had a good effect, but at the same time it had an adverse effect under specific conditions, on the formation of reservoirs. This paper also discusses the future direction and significance of studying mantle-derived fluid.

Discussion of the Mode and Mechanism of Oil and Gas Accumulation in the Nanbaxian Pool in the North of the Qaidam Basin

Because of the difference ofoil and gas accumulation condition between the hanging wall and the footwall of a fault, there is a peculiar accumulation mechanism that oil and gas mainly exists in the hanging wall of the basement fault, but in the footwall of the shallow detachment fault in the Nanbaxian pool. The oil and gas of the Nanbaxian pool came from the mature Jurassic hydrocarbon source rock of the Yibei depression located at the south of the Nanbaxian pool. Firstly, the oil and gas accumulated in the traps of the hanging wall of the basement fault by way of the unconformity and the basement faults, and turned into some primary deep pools; and then, the shallow detachment fault that formed in the later tectonic movement broke into the deep primary pools, which caused the oil and gas migration upwards along the basement faults and the shallow detachment faults and the evolvement into some secondary oil and gas pools later. The history of the Nanbaxian oil and gas accumulation can be summarized successively as the syndepositional upheaval controlled by faults; single hydrocarbon source rock; unconformities and faults as migration channels; buoyancy, overpressure and tectonic stress as dynamic forces; multistage migration and accumulation of oil and gas; and finally an overlapped double-floor pattern of oil and gas accumulation. The most important explorative targets in the north of the Qaidam Basin are traps connected with the primary pools in the footwall by shallow detachment faults.

Formation Laws of Inorganic Gas Pools in the Northern Jiangsu Basin

In the Northern Jiangsu basin there are high pure CO2 gas pools, low condensed oil-containing CO2 gas pools, high condensed oil-containing CO2 gas pools and He-containing natural gas pools, with the δ13Cco2 (PDB) values ranging from ?2.87%o to ?6.50%o, 3He/4He 3.71 × 10?6 to 6.42 × 10?6, R/Ra 2.64 to 4.5, 40Ar/36Ar 705 to 734, belonging to typical mantle source inorganic gas pools which are related to young magmatic activity. The gas layers occur in two major reservoir-caprock systems, the terrestrial Meso-Cenozoic clastic rock system and the marine Meso-Palaeozoic carbonate rock-clastic rock system. Controlled by the difference in the scale of traps in the two reservoir-caprock systems, large and medium-scale inorganic gas pools are formed in the marine Meso-Palaeozoic Group and only small ones are formed in the terrestrial Meso-Cenozoic strata. Inorganic gas pools in this basin are distributed along the two deep lithospheric faults on the west and south boundaries of the basin. Gas pools are developed at the intersected part of the ENE-trending faults that control the half graben and the E-W tenso-shear faults, mainly distributed near the Es1, Ny1 and Ny2-Q basalt eruption centres.

Penetration control by weld pool resonance during gas tungsten arc welding

Presents penetration control by weld pool resonance which occurs when the natural frequency of weld pool is equal to the frequency of sine wave current while the weld pool is excited into oscillation by superimposing sine wave current with definite frequency or regular frequency on DC current, and experiments carried out on detecting resonance signals during both stationary and travelling arc welding with variant frequency pulse current, and concludes with experimental results that penetration control can be realized by weld pool resonance when welding speed is lower than 80mm/min, and this control method is applicable to welding thin (0.5～3.0 mm) plates of carbon steel, low alloy steel, high strength steel and superhigh strength steel, and suitable for alternating polarity welding of stainless steel, titanium alloy steel and aluminum alloy.

Effects of Nitrogen Application Rate to Late Rice on Greenhouse Gas Emissions and Soil Carbon Pool During the Growing Season of Winter Chinese Milk vetch

It is of important referential values for the further understanding of the effects of fertilization on greenhouse gas emissions and the effects of winter green manure on soil carbon pool to study the effects of fertilization on the greenhouse gas emissions and soil carbon pool during the growing season of winter Chinese milk vetch in the process of rice cultivation.This study investigated the effects of nitrogen application in late rice season on the yield of the succeeding Chinese milk vetch and greenhouse gas emissions as well as the soil carbon pool characteristics after the winter planting of Chinese milk vetch with the winter idling of no nitrogen application as the control.The results showed that the yield of Chinese milk vetch was the highest under the nitrogen application of 225 kg/hm^2 in the late rice season,reaching up to 18 388.97 kg/hm^2,which was significantly different from other treatments( P <0.05).Nitrogen application in late rice season increased the emissions of N_2 O,CH_4,CO_2 and global warming potential( GWP) in the growing season of Chinese milk vetch.Compared with the winter idling treatment,winter planting of Chinese milk vetch significantly increased the soil organic carbon and soil carbon pool management index.The yield of Chinese milk vetch was significantly positively correlated with N_2O and CH_4 emissions( P < 0.05),while it presented extremely significant positive correlations with CO_2 emissions,GWP,active organic carbon,and carbon pool management index( P < 0.01).Nitrogen application in the late rice season increased the emissions of N_2 O,CH_4,CO_2,and enhanced the greenhouse gas emission potential during the growing season of Chinese milk vetch.Therefore,without reducing the yield of rice,reducing the amount of nitrogen fertilizer in rice could reduce the greenhouse gas emissions in the growing season of succeeding Chinese milk vetch.

GEOTHERMAL EVOLUTION AND TECTONOSEDIMENTATION OF THE NORTH CHINA CRUSTOBLOCK AND THEIR EFFECTS ON THE FORMATION OF OIL/GAS POOLS

The geothermal history of North China can be divided into at least four stages, i. c. Archaean (much hisher geothermal) stage, Paleoprotcrozoic (hish geothermal)stage, which resulted in four geotectonic stages (pregeosynehoe, geosyncline, platform and diwa stage) in the region. The geothermal field consists of three subgeothermal fields, theupper subgeothermal field with its depth of less than 2000 m, the middle subgeothermal field ranging from 2000 m to 5000 m in depth and the lower subgeothcrmal field locating at more than 5000 m in depth in North China. Sis thermostructural layers are recognised in North China, i. e. the mantle, the lower erust with its heat generation ratc of 0. 6 HGU. Oeothermal field is Corresponding to tectonosedimentary divisions in North China, controlling the tectonosedimentation, the evolution of souree rocks and the formation oF the oil/gas pools.

Conditions for the Formation of Oil and Gas Pools in Tertiary Volcanics in the Western Part of the Huimin Sag, Shandong and Their Distribution

Conditions for the Formation of oil and gas pools in Tertiary volcanics in the western part of the Huimin sag, Shandong and then (?)stribution have been studied based on the geological, seismic and well-logging information. In this paper, the types and lithofacies of the volcanic rocks in the western part of the Huimin sag are described; the relationship between rocks and electrical properties, the seismic reflection structures, the development and distribution of the volcanic rocks are expounded; and the fourfold role of the volcanic activities in the formation of the oil and gas pools is also dealt with. It is considered by the authors that the volcanic activities were not destructive to the formation of oil and gas pools but a factor favourable to the accumulation of organic matters and their conversion to hydrocarbon. The volcanic rocks might have served as reservoir rocks and cap rocks, or as a synsedimentary anticline. The prerequisites and important factors for the formation of oil and gas pools and their distribution are pointed out in the paper.

Formation Mechanism and Controlling Factors of Natural Gas Reservoirs of the Jialingjiang Formation in the East Sichuan Basin

The Lower Triassic Jialingjiang Formation reservoirs are distributed widely in the East Sichuan Basin, which are composed mainly of fractured reservoirs. However, natural gas with high concentration of H2S, ranging from 4% to 7%, was discovered in the Wolonghe Gas pool consisting primarily of porous reservoirs, while the other over 20 fractured gas reservoirs have comparatively low, tiny and even no H2S within natural gases. Researches have proved the H2S of the above reservoirs are all from the TSR origin. Most of the Jialingjiang Formation natural gases are mainly generated from Lower Permian carbonate rocks, the Wolonghe gas pool＇s natural gases are from the Upper Permian Longtan Formation, and the natural gases of the Huangcaoxia and Fuchengzhai gas pools are all from Lower Silurian mudstone. The formation of H2S is controlled by the characteristics and temperature of reservoirs, and is not necessarily related with gas sources. The Jialingjiang Formation in East Sichuan is buried deeply and its reservoir temperature has ever attained the condition of the TSR reaction. Due to poor reservoir potential, most of the gas pools do not have enough room for hydrocarbon reaction except for the Wolonghe gas pool, and thus natural gases with high H2S concentration are difficult to be generated abundantly. The south part of East Sichuan did not generate natural gases with high H2S concentration because the reservoir was buried relatively shallow, and did not suffer high temperature. Hence, while predicting the distribution of H2S, the characteristics and temperature of reservoirs are the necessary factors to be considerd besides the existence of anhydrite.

Helium,Argon and Carbon Isotopic Compositions of Spring Gases in the Hainan Island,China

Chemical and isotopic compositions have been measured for N2-He-rich bubbling gases discharging from hot springs in the Hainan Island, Southern China. Observed 3He/4He ratios （0.1-1.3 RA） indicate the occurrence of a mantle component throughout the island, which has been highly diluted by a crustal radiogenic 4He component. The occurrence of mantle-derived helium is high in the northern island （12%-16% of total He） and gradually decreases towards southern coast （1%-3% of total He）. Such a distribution pattern is most likely controlled by the Pleocene-Quaternary volcanic activities in the northern island and groundwater circulation along the deep major faults. The 4~Ar/36Ar and N2/Ar ratios suggest that N2 and Ar of the hot spring gases are mostly meteoric. Although 13C values of CO2 （-20%0 to -27%0） with low concentrations are consistent with the biogenic origin, the combination of SHe/4He and 51SCco2 suggests a two end-member mixing of mantle and crustal components with CO2/3He ratios of 2x 109 and 8 1011, respectively. However, the low CO2/3He ratios （1- 22106） can not be ascribed in terms of the simple mixing but has to be explained by the addition of radiogenic 4He and loss of CO2 by calcite precipitation in the hydrothermal system, which is most likely controlled by the degree of gas-water-rock interaction.

Welding Deviation Detection Algorithm Based on Extremum of Molten Pool Image Contour

The welding deviation detection is the basis of robotic tracking welding, but the on-line real-time measurement of welding deviation is still not well solved by the existing methods. There is plenty of information in the gas metal arc welding（GMAW） molten pool images that is very important for the control of welding seam tracking. The physical meaning for the curvature extremum of molten pool contour is revealed by researching the molten pool images, that is, the deviation information points of welding wire center and the molten tip center are the maxima and the local maxima of the contour curvature, and the horizontal welding deviation is the position difference of these two extremum points. A new method of weld deviation detection is presented, including the process of preprocessing molten pool images, extracting and segmenting the contours, obtaining the contour extremum points, and calculating the welding deviation, etc. Extracting the contours is the premise, segmenting the contour lines is the foundation, and obtaining the contour extremum points is the key. The contour images can be extracted with the method of discrete dyadic wavelet transform, which is divided into two sub contours including welding wire and molten tip separately. The curvature value of each point of the two sub contour lines is calculated based on the approximate curvature formula of multi-points for plane curve, and the two points of the curvature extremum are the characteristics needed for the welding deviation calculation. The results of the tests and analyses show that the maximum error of the obtained on-line welding deviation is 2 pixels（0.16 ram）, and the algorithm is stable enough to meet the requirements of the pipeline in real-time control at a speed of less than 500 mm/min. The method can be applied to the on-line automatic welding deviation detection.

Three-Dimensional Reconstruction of Welding Pool Surface by Binocular Vision

Current research of binocular vision systems mainly need to resolve the camera’s intrinsic parameters before the reconstruction of three-dimensional(3D)objects.The classical Zhang’calibration is hardly to calculate all errors caused by perspective distortion and lens distortion.Also,the image-matching algorithm of the binocular vision system still needs to be improved to accelerate the reconstruction speed of welding pool surfaces.In this paper,a preset coordinate system was utilized for camera calibration instead of Zhang’calibration.The binocular vision system was modified to capture images of welding pool surfaces by suppressing the strong arc interference during gas metal arc welding.Combining and improving the algorithms of speeded up robust features,binary robust invariant scalable keypoints,and KAZE,the feature information of points(i.e.,RGB values,pixel coordinates)was extracted as the feature vector of the welding pool surface.Based on the characteristics of the welding images,a mismatch-elimination algorithm was developed to increase the accuracy of image-matching algorithms.The world coordinates of matching feature points were calculated to reconstruct the 3D shape of the welding pool surface.The effectiveness and accuracy of the reconstruction of welding pool surfaces were verified by experimental results.This research proposes the development of binocular vision algorithms that can reconstruct the surface of welding pools accurately to realize intelligent welding control systems in the future.

Vision sensing of P-GMAW weld pool using narrow band filters with different center wavelengths

The selection of narrow band filter＇s center wavelength has an important influence on the quality of the weld pool image captured in passive vision mettmd for controlling arc welding process. In this paper, 29 narrow band filters with different center wavelengths ranging from ultraviolet to near infrared wavelength were used to capture images of weld pool during both the peak current period and the base current period of P-GMA W （ pulsed gas metal arc welding）. The experimental results showed that the filters with near infrared center wavelength could weaken the arc most during the peak current period, while during the base current period the entire weld pool could be seen with the filters with wavelength above 600 nm. The camera spectral response and the radio of arc to weld pool emission were considered to analyze the phenomenon of experimental results.

Formation conditions and exploration direction of large natural gas reservoirs in the oil-prone Bohai Bay Basin, East China

The Bohai Bay Basin is a typical oil-prone basin, in which natural gas geological reserves have a small proportion. In this basin, the gas source rock is largely medium-deep lake mudstone with oil-prone type Ⅱ2-Ⅱ1 kerogens, and natural gas preservation conditions are poor due to active late tectonic movements. The formation conditions of large natural gas fields in the Bohai Bay Basin have been elusive. Based on the exploration results of Bohai Bay Basin and comparison with large gas fields in China and abroad, the formation conditions of conventional large-scale natural gas reservoirs in the Bohai Bay Basin were examined from accumulation dynamics, structure and sedimentation. The results show that the formation conditions of conventional large natural gas reservoirs in Bohai Bay Basin mainly include one core element and two key elements. The core factor is the strong sealing of Paleogene "quilt-like" overpressure mudstone. The two key factors include the rapid maturation and high-intensity gas generation of source rock in the late stage and large scale reservoir. On this basis, large-scale nature gas accumulation models in the Bohai Bay Basin have been worked out, including regional overpressure mudstone enriching model, local overpressure mudstone depleting model, sand-rich sedimentary subsag depleting model and late strongly-developed fault depleting model. It is found that Bozhong sag, northern Liaozhong sag and Banqiao sag have favorable conditions for the formation of large-scale natural gas reservoirs, and are worth exploring. The study results have important guidance for exploration of large scale natural gas reservoirs in the Bohai Bay Basin.

Origin,migration,and accumulation of carbon dioxide in the East Changde Gas Field,Songliao Basin,northeastern China

CO2reservoirs are widely distributed within the Yingcheng Formation in the Songliao Basin, but the extreme horizontal heterogeneity of CO2content causes difficulties in the exploration and exploitation of methane. Former studies have fully covered the lithology, structure, and distribution of the reservoirs high in CO2content, but few are reported about migration and accumulation of CO2. Using the East Changde Gas Field as an example, we studied the accumulation mechanisms of CO2 gas. Two original types of accumulation model are proposed in this study. The fault-controlled accumulation model refers to gas accumulation in the reservoir body that is cut by a basement fault(the West Xu Fault), allowing the hydrocarbon gas generated in the lower formation to migrate into the reservoir body through the fault, which results in a relatively lower CO2content. The volcanic conduit-controlled accumulation model refers to a reservoir body that is not cut by the basement fault, which prevents the hydrocarbon gas from being mixed in and leads to higher CO2contents. This conclusion provides useful theories for prediction of CO2distribution in similar basins and reservoirs.

Weld pool vision sensing and image processing for GMAW

It is difficult to acquire satisfied weld pool image by CCD sensor during gas metal arc welding（ GMAW） , for arc disturbs violently, welding current is great and working frequency is high. By using CMOS vision sensor to GMA W process, the vivid weld pool image is collected at any time, furthermore, whose gray compression ratio is controllable by sensor hardware circuit developed. Acquired weld pool image is firstly pre-processed by using Wiener filter and Ostu threshold segmentation algorithm. Subsequently separation between weld pool image and cathode mist region is conducted by means of mathematical morphological algorithm, and the edge of weld pool image is extracted by using Prewitt algorithm.

Noble gas abundances and isotopic compositions in mantle-derived xenoliths,NE China

Following the researches of helium isotopic compositions in mantle-derived xenoliths in eastern China, this study reported noble gas abundances and isotopic compositions of mantle-derived xenoliths from Kuandian of Liaoning Province, Huinan of Jilin Province and Hannuoba of Hebei Province. Compared with the middle ocean ridge basalt (MORB) and other continental areas, mantle-derived xenoliths in NE China are characterized by slightly low noble gas abundances, 3He/4He equivalent to or lower than that of MORB, 40Ar/36Ar lower than that of MORB, 38Ar/36Ar and Ne-Kr-Xe isotopic ratios equivalent to those of atmosphere. These results indicate the heterogeneity of subcontinental lithospheric mantle beneath northeastern China, that is, a MORB reservoir-like mantle beneath Kuandian and an enriched/metasomatized mantle beneath Huinan. Low 40Ar/ 36Ar ratios in the three studied areas may imply that a subducted atmospheric component has been preserved in the subcontinental lithospheric mantle.