Hundred years after the conjecture of the British astronomer Eddington that the sun is powered by nuclear fusion of hydrogen, new physics theory may help make energy harvesting by nuclear fusion soon a reality. Resear...Hundred years after the conjecture of the British astronomer Eddington that the sun is powered by nuclear fusion of hydrogen, new physics theory may help make energy harvesting by nuclear fusion soon a reality. Researchers as well as investors funding fusion megaprojects are asked to deal with new relativistic corrections for mass and energy proposed by Suleiman in his Information Relativity Theory (IRT). These corrections were calculated in this contribution. It will help to decide whether a venture will be successful and to save big investments when in doubt. The assumed optimal kinetic energy for controlled nuclear fusion must be corrected to a somewhat higher level. At very high kinetic energy in the upper GeV range, it remains not enough baryonic mass to be transformed in energy. The fusion probability faded out to zero already at the golden limit of the recession speed of between target nucleon and projectile nucleon. Cold nuclear fusion, if ever possible, is recommended for protons rather than deuterons at highest experimental possible temperatures around 1000 (K) and needs fine-tuned kinetic nucleon energy. It would be also of interest whether a golden ratio based nuclear fuel confinement chamber could be beneficial. In this connection, also cold nuclear fusion setups should be discussed. Nature is governed by the golden ratio and criticality of physical systems influenced by it, and nuclear physics is not an exception. Computer simulations of the underlying controlled nuclear fusion processes should gain profit from IRT corrected starting information and may tackle anew possible low energy nuclear transmutations considering the wave-like dark components of matter and energy.展开更多
In this paper, firstly, the bias between observed radiances from the Advanced TIROS-N Operational Vertical Sounder (ATOVS) and those simulated from a model first-guess are corrected. After bias correction, the obser...In this paper, firstly, the bias between observed radiances from the Advanced TIROS-N Operational Vertical Sounder (ATOVS) and those simulated from a model first-guess are corrected. After bias correction, the observed minus calculated (O-B) radiances of most channels were reduced closer to zero, with peak values in each channel shifted towards zero, and the distribution of O-B closer to a Gaussian distribution than without bias correction. Secondly, ATOVS radiance data with and without bias correction are assimilated directly with an Ensemble Kalman Filter (EnKF) data assimilation system, which are then adopted as the initial fields in the forecast model T106L19 to simulate Typhoon Prapiroon (2006) during the period 2-4 August 2006. The prediction results show that the assimilation of ATOVS radiance data with bias correction has a significant and positive impact upon the prediction of the typhoon's track and intensity, although the results are not perfect.展开更多
Element doping has been proved to be a useful method to correct for the mass bias fractionation when analyzing iron isotope compositions.We present a systematic re-assessment on how the doped nickel may affect the iro...Element doping has been proved to be a useful method to correct for the mass bias fractionation when analyzing iron isotope compositions.We present a systematic re-assessment on how the doped nickel may affect the iron isotope analysis in this study by carrying out several experiments.We find three important factors that can affect the analytical results,including the Ni:Fe ratio in the analyte solutions,the match of the Ni:Fe ratio between the unknown sample and standard solutions,and the match of the Fe concentration between the sample and standard solutions.Thus,caution is required when adding Ni to the analyte Fe solutions before analysis.Using our method,theδ56Fe and δ57Fe values of the USGS standards W-2 a,BHVO-2,BCR-2,AGV-2 and GSP-2 are consistent with the recommended literature values,and the long-term(one year) external reproducibility is better than 0.03 and 0.05‰(2 SD) for δ56Fe and δ57Fe,respectively.Therefore,the analytical method established in our laboratory is a method of choice for high quantity Fe isotope data in geological materials.展开更多
Ti separation was achieved by ion-exchange chromatography using Bio-Rad AG 1-X8 anion-exchange and DGA resins.For high-Fe/Ti and high-Mg/Ti igneous samples,a three-column procedure was required,whereas a two-column pr...Ti separation was achieved by ion-exchange chromatography using Bio-Rad AG 1-X8 anion-exchange and DGA resins.For high-Fe/Ti and high-Mg/Ti igneous samples,a three-column procedure was required,whereas a two-column procedure was used for low-Fe/Ti and low-Mg/Ti igneous samples.The Ti isotopes were analysed by MC-ICP-MS,and instrumental mass bias was corrected using a ^(47)Ti-^(49)Ti double-spike technique.The ^(47)Ti-^(49)Ti double-spike and SRM 3162a were calibrated using SRM 979-Cr,certificated value ^(53)Cr/^(52)Crt rue=0.11339.Isobaric interference was evaluated by analysing Alfa-Ti doped with Na,Mg,Ca,and Mo,and results indicate that high concentrations of Na and Mg have no significant effect on Ti isotope analyses;however,Ca and Mo interferences lead to erroneousδ^(49/47)Ti values when Ca/Ti and Mo/Ti ratios exceed 0.01 and 0.1,respectively.Titanium isotopic compositions were determined for 12 igneous reference materials,BCR-2,BHVO-2,GBW07105,AGV-1,AGV-2,W-2,GBW07123,GBW07126,GBW07127,GBW07101,JP-1,and DTS-2b.Samples yieldδ^(49/47)Ti(‰)of−0.035±0.022,−0.038±0.031,0.031±0.022,0.059±0.038,0.044±0.037,0.000±0.015,0.154±0.044,−0.044±0.018,0.010±0.022,0.064±0.043,0.169±0.034,and−0.047±0.025(relative to OL-Ti,±2SD),respectively;of which isotopic compositions of DTS-2b,JP-1,GBW07101,GBW07105,GBW07123,GBW07126,and GBW07127 are reported for the first time.Standard Alfa-Ti was analysed repeatedly over a ten-month period,indicating a reproducibility of±0.047(2SD)forδ^(49/47)Ti,similar to the precisions obtained for geochemical reference materials.展开更多
We studied the m=0 limit of different components of Wigner functions for massive fermions. Comparingwith the chiral kinetic theory, we separated the vanishing and non-vanishing parts of vector and axial-vector compone...We studied the m=0 limit of different components of Wigner functions for massive fermions. Comparingwith the chiral kinetic theory, we separated the vanishing and non-vanishing parts of vector and axial-vector components,up to the first order of . Then, we discussed the possible physical meaning of the vanishing and non-vanishingparts and their different behaviors at thermal equilibrium.展开更多
Transverse pressure gradient(TPG)is one of the key factors influencing the boundary layer airflow diversion in a bump inlet.This paper proposes a novel TPG-based hypersonic bump inlet design method.This method consist...Transverse pressure gradient(TPG)is one of the key factors influencing the boundary layer airflow diversion in a bump inlet.This paper proposes a novel TPG-based hypersonic bump inlet design method.This method consists of two steps.First,a parametric optimization approach is employed to design a series of 2D inlets with various compression efficiencies.Then,according to the prescribed TPG,the optimized inlets are placed in different osculating planes to generate a 3D bump inlet.This method provides a means to directly control the aerodynamic parameters of the bump rather than the geometric parameters.By performing this method to a hypersonic chin inlet,a long and wide bump surface is formed in the compression wall,which leads to good integration of the bump/inlet.Results show that a part of the near-wall boundary layer flow is diverted by the bump,resulting in a slight decrease in the mass flow but a significant improvement in the total pressure recovery.In addition,the starting ability is significantly improved by adding the bump surface.Analysis reveals that the bump has a 3D rebuilding effect on the large-scale separation bubble of the unstarted inlet.Finally,a mass flow correction is performed on the designed bump inlet to increase the mass flow to full airflow capture.The results show that the mass flow rate of the corrected bump inlet reaches up to 0.9993,demonstrating that the correction method is effective.展开更多
文摘Hundred years after the conjecture of the British astronomer Eddington that the sun is powered by nuclear fusion of hydrogen, new physics theory may help make energy harvesting by nuclear fusion soon a reality. Researchers as well as investors funding fusion megaprojects are asked to deal with new relativistic corrections for mass and energy proposed by Suleiman in his Information Relativity Theory (IRT). These corrections were calculated in this contribution. It will help to decide whether a venture will be successful and to save big investments when in doubt. The assumed optimal kinetic energy for controlled nuclear fusion must be corrected to a somewhat higher level. At very high kinetic energy in the upper GeV range, it remains not enough baryonic mass to be transformed in energy. The fusion probability faded out to zero already at the golden limit of the recession speed of between target nucleon and projectile nucleon. Cold nuclear fusion, if ever possible, is recommended for protons rather than deuterons at highest experimental possible temperatures around 1000 (K) and needs fine-tuned kinetic nucleon energy. It would be also of interest whether a golden ratio based nuclear fuel confinement chamber could be beneficial. In this connection, also cold nuclear fusion setups should be discussed. Nature is governed by the golden ratio and criticality of physical systems influenced by it, and nuclear physics is not an exception. Computer simulations of the underlying controlled nuclear fusion processes should gain profit from IRT corrected starting information and may tackle anew possible low energy nuclear transmutations considering the wave-like dark components of matter and energy.
基金supported by the Knowledge Innovation Program of the Chinese Academy of Sciences (Grant Nos KZCX2-YW-202 and KZCX2-YW-Q03-3)the Chinese Special Scientific Research Project for Public Interest (Grant No GYHY200906004)
文摘In this paper, firstly, the bias between observed radiances from the Advanced TIROS-N Operational Vertical Sounder (ATOVS) and those simulated from a model first-guess are corrected. After bias correction, the observed minus calculated (O-B) radiances of most channels were reduced closer to zero, with peak values in each channel shifted towards zero, and the distribution of O-B closer to a Gaussian distribution than without bias correction. Secondly, ATOVS radiance data with and without bias correction are assimilated directly with an Ensemble Kalman Filter (EnKF) data assimilation system, which are then adopted as the initial fields in the forecast model T106L19 to simulate Typhoon Prapiroon (2006) during the period 2-4 August 2006. The prediction results show that the assimilation of ATOVS radiance data with bias correction has a significant and positive impact upon the prediction of the typhoon's track and intensity, although the results are not perfect.
基金This work was supported by National Nature Science Foundation of China(Grant Numbers 41776067 and 41630968).
文摘Element doping has been proved to be a useful method to correct for the mass bias fractionation when analyzing iron isotope compositions.We present a systematic re-assessment on how the doped nickel may affect the iron isotope analysis in this study by carrying out several experiments.We find three important factors that can affect the analytical results,including the Ni:Fe ratio in the analyte solutions,the match of the Ni:Fe ratio between the unknown sample and standard solutions,and the match of the Fe concentration between the sample and standard solutions.Thus,caution is required when adding Ni to the analyte Fe solutions before analysis.Using our method,theδ56Fe and δ57Fe values of the USGS standards W-2 a,BHVO-2,BCR-2,AGV-2 and GSP-2 are consistent with the recommended literature values,and the long-term(one year) external reproducibility is better than 0.03 and 0.05‰(2 SD) for δ56Fe and δ57Fe,respectively.Therefore,the analytical method established in our laboratory is a method of choice for high quantity Fe isotope data in geological materials.
基金financially supported by the National Natural Science Foundation of China(Project Nos.41473005,41973020,41873027)。
文摘Ti separation was achieved by ion-exchange chromatography using Bio-Rad AG 1-X8 anion-exchange and DGA resins.For high-Fe/Ti and high-Mg/Ti igneous samples,a three-column procedure was required,whereas a two-column procedure was used for low-Fe/Ti and low-Mg/Ti igneous samples.The Ti isotopes were analysed by MC-ICP-MS,and instrumental mass bias was corrected using a ^(47)Ti-^(49)Ti double-spike technique.The ^(47)Ti-^(49)Ti double-spike and SRM 3162a were calibrated using SRM 979-Cr,certificated value ^(53)Cr/^(52)Crt rue=0.11339.Isobaric interference was evaluated by analysing Alfa-Ti doped with Na,Mg,Ca,and Mo,and results indicate that high concentrations of Na and Mg have no significant effect on Ti isotope analyses;however,Ca and Mo interferences lead to erroneousδ^(49/47)Ti values when Ca/Ti and Mo/Ti ratios exceed 0.01 and 0.1,respectively.Titanium isotopic compositions were determined for 12 igneous reference materials,BCR-2,BHVO-2,GBW07105,AGV-1,AGV-2,W-2,GBW07123,GBW07126,GBW07127,GBW07101,JP-1,and DTS-2b.Samples yieldδ^(49/47)Ti(‰)of−0.035±0.022,−0.038±0.031,0.031±0.022,0.059±0.038,0.044±0.037,0.000±0.015,0.154±0.044,−0.044±0.018,0.010±0.022,0.064±0.043,0.169±0.034,and−0.047±0.025(relative to OL-Ti,±2SD),respectively;of which isotopic compositions of DTS-2b,JP-1,GBW07101,GBW07105,GBW07123,GBW07126,and GBW07127 are reported for the first time.Standard Alfa-Ti was analysed repeatedly over a ten-month period,indicating a reproducibility of±0.047(2SD)forδ^(49/47)Ti,similar to the precisions obtained for geochemical reference materials.
文摘We studied the m=0 limit of different components of Wigner functions for massive fermions. Comparingwith the chiral kinetic theory, we separated the vanishing and non-vanishing parts of vector and axial-vector components,up to the first order of . Then, we discussed the possible physical meaning of the vanishing and non-vanishingparts and their different behaviors at thermal equilibrium.
基金the National Natural Science Foundation of China(No.12102470)the Hunan Provincial Innovation Foundation for Postgraduate(No.CX20200082),China。
文摘Transverse pressure gradient(TPG)is one of the key factors influencing the boundary layer airflow diversion in a bump inlet.This paper proposes a novel TPG-based hypersonic bump inlet design method.This method consists of two steps.First,a parametric optimization approach is employed to design a series of 2D inlets with various compression efficiencies.Then,according to the prescribed TPG,the optimized inlets are placed in different osculating planes to generate a 3D bump inlet.This method provides a means to directly control the aerodynamic parameters of the bump rather than the geometric parameters.By performing this method to a hypersonic chin inlet,a long and wide bump surface is formed in the compression wall,which leads to good integration of the bump/inlet.Results show that a part of the near-wall boundary layer flow is diverted by the bump,resulting in a slight decrease in the mass flow but a significant improvement in the total pressure recovery.In addition,the starting ability is significantly improved by adding the bump surface.Analysis reveals that the bump has a 3D rebuilding effect on the large-scale separation bubble of the unstarted inlet.Finally,a mass flow correction is performed on the designed bump inlet to increase the mass flow to full airflow capture.The results show that the mass flow rate of the corrected bump inlet reaches up to 0.9993,demonstrating that the correction method is effective.