基于Massive MIMO的5G高业务量场景组网方案

针对5G用户量大、流量密度大等高密重载特殊场景,引入分布式Massive MIMO技术,给出典型场景的速率和容量提升方案,并对方案进行了验证。最后总结了典型场景的组网应用建议,对提升5G用户感知,促进5G市场发展具有重要意义。

Deep learning for joint channel estimation and feedback in massive MIMO systems

The great potentials of massive Multiple-Input Multiple-Output(MIMO)in Frequency Division Duplex(FDD)mode can be fully exploited when the downlink Channel State Information(CSI)is available at base stations.However,the accurate CsI is difficult to obtain due to the large amount of feedback overhead caused by massive antennas.In this paper,we propose a deep learning based joint channel estimation and feedback framework,which comprehensively realizes the estimation,compression,and reconstruction of downlink channels in FDD massive MIMO systems.Two networks are constructed to perform estimation and feedback explicitly and implicitly.The explicit network adopts a multi-Signal-to-Noise-Ratios(SNRs)technique to obtain a single trained channel estimation subnet that works well with different SNRs and employs a deep residual network to reconstruct the channels,while the implicit network directly compresses pilots and sends them back to reduce network parameters.Quantization module is also designed to generate data-bearing bitstreams.Simulation results show that the two proposed networks exhibit excellent performance of reconstruction and are robust to different environments and quantization errors.

Extreme massive hydraulic fracturing in deep coalbed methane horizontal wells:A case study of the Linxing Block,eastern Ordos Basin,NW China

Deep coal seams show low permeability,low elastic modulus,high Poisson’s ratio,strong plasticity,high fracture initiation pressure,difficulty in fracture extension,and difficulty in proppants addition.We proposed the concept of large-scale stimulation by fracture network,balanced propagation and effective support of fracture network in fracturing design and developed the extreme massive hydraulic fracturing technique for deep coalbed methane(CBM)horizontal wells.This technique involves massive injection with high pumping rate+high-intensity proppant injection+perforation with equal apertures and limited flow+temporary plugging and diverting fractures+slick water with integrated variable viscosity+graded proppants with multiple sizes.The technique was applied in the pioneering test of a multi-stage fracturing horizontal well in deep CBM of Linxing Block,eastern margin of the Ordos Basin.The injection flow rate is 18 m^(3)/min,proppant intensity is 2.1 m^(3)/m,and fracturing fluid intensity is 16.5 m^(3)/m.After fracturing,a complex fracture network was formed,with an average fracture length of 205 m.The stimulated reservoir volume was 1987×10^(4)m^(3),and the peak gas production rate reached 6.0×10^(4)m^(3)/d,which achieved efficient development of deep CBM.

A Correlation-Based Stochastic Model for Massive MIMO Channel

In this paper,the channel impulse response matrix(CIRM)can be expressed as a sum of couplings between the steering vectors at the base station(BS)and the eigenbases at the mobile station(MS).Nakagami distribution was used to describe the fading of the coupling between the steering vectors and the eigenbases.Extensive measurements were carried out to evaluate the performance of this proposed model.Furthermore,the physical implications of this model were illustrated and the capacities are analyzed.In addition,the azimuthal power spectrum(APS)of several models was analyzed.Finally,the channel hardening effect was simulated and discussed.Results showed that the proposed model provides a better fit to the measured results than the other CBSM,i.e.,Weichselberger model.Moreover,the proposed model can provide better tradeoff between accuracy and complexity in channel synthesis.This CIRM model can be used for massive MIMO design in the future communication system design.

Optimization of resource allocation in FDD massive MIMO systems

The performance of massive MIMO systems relies heavily on the availability of Channel State Information at the Transmitter(CSIT).A large amount of work has been devoted to reducing the CSIT acquisition overhead at the pilot training and/or CsI feedback stage.In fact,the downlink communication generally includes three stages,i.e.,pilot training,CsI feedback,and data transmission.These three stages are mutually related and jointly determine the overall system performance.Unfortunately,there exist few studies on the reduction of csIT acquisition overhead from the global point of view.In this paper,we integrate the Minimum Mean Square Error(MMSE)channel estimation,Random Vector Quantization(RVQ)based limited feedback and Maximal Ratio Combining(MRC)precoding into a unified framework for investigating the resource allocation problem.In particular,we first approximate the covariance matrix of the quantization error with a simple expression and derive an analytical expression of the received Signal-to-Noise Ratio(SNR)based on the deterministic equivalence theory.Then the three performance metrics(the spectral efficiency,energy efficiency,and total energy consumption)oriented problems are formulated analytically.With practical system requirements,these three metrics can be collaboratively optimized.Finally,we propose an optimization solver to derive the optimal partition of channel coherence time.Experiment results verify the benefits of the proposed resource allocation schemes under three different scenarios and illustrate the tradeoff of resource allocation between three stages.

Off-Grid Compressed Channel Estimation with Parallel Interference Cancellation for Millimeter Wave Massive MIMO

Millimeter wave(mmWave)massive multiple-input multiple-output(MIMO)plays an important role in the fifth-generation(5G)mobile communications and beyond wireless communication systems owing to its potential of high capacity.However,channel estimation has become very challenging due to the use of massive MIMO antenna array.Fortunately,the mmWave channel has strong sparsity in the spatial angle domain,and the compressed sensing technology can be used to convert the original channel matrix into the sparse matrix of discrete angle grid.Thus the high-dimensional channel matrix estimation is transformed into a sparse recovery problem with greatly reduced computational complexity.However,the path angle in the actual scene appears randomly and is unlikely to be completely located on the quantization angle grid,thus leading to the problem of power leakage.Moreover,multiple paths with the random distribution of angles will bring about serious interpath interference and further deteriorate the performance of channel estimation.To address these off-grid issues,we propose a parallel interference cancellation assisted multi-grid matching pursuit(PIC-MGMP)algorithm in this paper.The proposed algorithm consists of three stages,including coarse estimation,refined estimation,and inter-path cyclic iterative inter-ference cancellation.More specifically,the angular resolution can be improved by locally refining the grid to reduce power leakage,while the inter-path interference is eliminated by parallel interference cancellation(PIC),and the two together improve the estimation accuracy.Simulation results show that compared with the traditional orthogonal matching pursuit(OMP)algorithm,the normalized mean square error(NMSE)of the proposed algorithm decreases by over 14dB in the case of 2 paths.

Power Allocation for SE Maximization in Uplink Massive MIMO System Under Minimum Rate Constraint

In this paper,we optimize the spectrum efficiency(SE)of uplink massive multiple-input multiple-output(MIMO)system with imperfect channel state information(CSI)over Rayleigh fading channel.The SE optimization problem is formulated under the constraints of maximum power and minimum rate of each user.Then,we develop a near-optimal power allocation(PA)scheme by using the successive convex approximation(SCA)method,Lagrange multiplier method,and block coordinate descent(BCD)method,and it can obtain almost the same SE as the benchmark scheme with lower complexity.Since this scheme needs three-layer iteration,a suboptimal PA scheme is developed to further reduce the complexity,where the characteristic of massive MIMO(i.e.,numerous receive antennas)is utilized for convex reformulation,and the rate constraint is converted to linear constraints.This suboptimal scheme only needs single-layer iteration,thus has lower complexity than the near-optimal scheme.Finally,we joint design the pilot power and data power to further improve the performance,and propose an two-stage algorithm to obtain joint PA.Simulation results verify the effectiveness of the proposed schemes,and superior SE performance is achieved.

Massive Dirac particles based on gapped graphene with Rosen-Morse potential in a uniform magnetic field

We explore the gapped graphene structure in the two-dimensional plane in the presence of the Rosen-Morse potential and an external uniform magnetic field.In order to describe the corresponding structure,we consider the propagation of electrons in graphene as relativistic fermion quasi-particles,and analyze it by the wave functions of two-component spinors with pseudo-spin symmetry using the Dirac equation.Next,to solve and analyze the Dirac equation,we obtain the eigenvalues and eigenvectors using the Legendre differential equation.After that,we obtain the bounded states of energy depending on the coefficients of Rosen-Morse and magnetic potentials in terms of quantum numbers of principal n and spin-orbit k.Then,the values of the energy spectrum for the ground state and the first excited state are calculated,and the wave functions and the corresponding probabilities are plotted in terms of coordinates r.In what follows,we explore the band structure of gapped graphene by the modified dispersion relation and write it in terms of the two-dimensional wave vectors K_(x) and K_(y).Finally,the energy bands are plotted in terms of the wave vectors K_(x) and K_(y) with and without the magnetic term.

Optimal AP Deployment in Cell-Free Massive MIMO Systems with LoS/NLoS Transmissions:A Stochastic Geometry Approach

Cell-free massive multiple-input multipleoutput(MIMO)is a promising technology for future wireless communications,where a large number of distributed access points(APs)simultaneously serve all users over the same time-frequency resources.Since users and APs may locate close to each other,the line-of-sight(Lo S)transmission occurs more frequently in cell-free massive MIMO systems.Hence,in this paper,we investigate the cell-free massive MIMO system with Lo S and non-line-of-sight(NLo S)transmissions,where APs and users are both distributed according to Poisson point process.Using tools from stochastic geometry,we derive a tight lower bound for the user downlink achievable rate and we further obtain the energy efficiency(EE)by considering the power consumption on downlink payload transmissions and circuitry dissipation.Based on the analysis,the optimal AP density and AP antenna number that maximize the EE are obtained.It is found that compared with the previous work that only considers NLo S transmissions,the actual optimal AP density should be much smaller,and the maximized EE is actually much higher.

Turbo Message Passing Based Burst Interference Cancellation for Data Detection in Massive MIMO-OFDM Systems

This paper investigates the fundamental data detection problem with burst interference in massive multiple-input multiple-output orthogonal frequency division multiplexing(MIMO-OFDM) systems. In particular, burst interference may occur only on data symbols but not on pilot symbols, which means that interference information cannot be premeasured. To cancel the burst interference, we first revisit the uplink multi-user system and develop a matrixform system model, where the covariance pattern and the low-rank property of the interference matrix is discussed. Then, we propose a turbo message passing based burst interference cancellation(TMP-BIC) algorithm to solve the data detection problem, where the constellation information of target data is fully exploited to refine its estimate. Furthermore, in the TMP-BIC algorithm, we design one module to cope with the interference matrix by exploiting its lowrank property. Numerical results demonstrate that the proposed algorithm can effectively mitigate the adverse effects of burst interference and approach the interference-free bound.

Progress and prospects of EOR technology in deep,massive sandstone reservoirs with a strong bottom-water drive

The Triassic massive sandstone reservoir in the Tahe oilfield has a strong bottom-water drive and is characterized by great burial depth,high temperature and salinity,a thin pay zone,and strong heterogeneity.At present,the water-cut is high in each block within the reservoir;some wells are at an ultrahigh water-cut stage.A lack of effective measures to control water-cut rise and stabilize oil production have necessitated the application of enhanced oil recovery(EOR)technology.This paper investigates the development and technological advances for oil reservoirs with strong edge/bottom-water drive globally,and compares their application to reservoirs with characteristics similar to the Tahe oilfield.Among the technological advances,gas injection from the top and along the direction of structural dip has been used to optimize the flow field in a typical bottom-water drive reservoir.Bottom-water coning is restrained by gas injection-assisted water control.In addition,increasing the lateral driving pressure differential improves the plane sweep efficiency which enhances oil recovery in turn.Gas injection technology in combination with technological measures like channeling prevention and blocking,and water plugging and profile control,can achieve better results in reservoir development.Gas flooding tests in the Tahe oilfield are of great significance to identifying which EOR technology is the most effective and has the potential of large-scale application for improving development of deep reservoirs with a strong bottomwater drive.

Performance Analysis of ZF and RZF in Low-Resolution ADC/DAC Massive MIMO Systems

Large number of antennas and higher bandwidth usage in massive multiple-input-multipleoutput(MIMO)systems create immense burden on receiver in terms of higher power consumption.The power consumption at the receiver radio frequency(RF)circuits can be significantly reduced by the application of analog-to-digital converter(ADC)of low resolution.In this paper we investigate bandwidth efficiency(BE)of massive MIMO with perfect channel state information(CSI)by applying low resolution ADCs with Rician fadings.We start our analysis by deriving the additive quantization noise model,which helps to understand the effects of ADC resolution on BE by keeping the power constraint at the receiver in radar.We also investigate deeply the effects of using higher bit rates and the number of BS antennas on bandwidth efficiency(BE)of the system.We emphasize that good bandwidth efficiency can be achieved by even using low resolution ADC by using regularized zero-forcing(RZF)combining algorithm.We also provide a generic analysis of energy efficiency(EE)with different options of bits by calculating the energy efficiencies(EE)using the achievable rates.We emphasize that satisfactory BE can be achieved by even using low-resolution ADC/DAC in massive MIMO.

Low-complexity signal detection for massive MIMO systems via trace iterative method

Linear minimum mean square error(MMSE)detection has been shown to achieve near-optimal performance for massive multiple-input multiple-output(MIMO)systems but inevitably involves complicated matrix inversion,which entails high complexity.To avoid the exact matrix inversion,a considerable number of implicit and explicit approximate matrix inversion based detection methods is proposed.By combining the advantages of both the explicit and the implicit matrix inversion,this paper introduces a new low-complexity signal detection algorithm.Firstly,the relationship between implicit and explicit techniques is analyzed.Then,an enhanced Newton iteration method is introduced to realize an approximate MMSE detection for massive MIMO uplink systems.The proposed improved Newton iteration significantly reduces the complexity of conventional Newton iteration.However,its complexity is still high for higher iterations.Thus,it is applied only for first two iterations.For subsequent iterations,we propose a novel trace iterative method(TIM)based low-complexity algorithm,which has significantly lower complexity than higher Newton iterations.Convergence guarantees of the proposed detector are also provided.Numerical simulations verify that the proposed detector exhibits significant performance enhancement over recently reported iterative detectors and achieves close-to-MMSE performance while retaining the low-complexity advantage for systems with hundreds of antennas.

Design Framework of Unsourced Multiple Access for 6G Massive IoT

In this paper,ambient IoT is used as a typical use case of massive connections for the sixth generation(6G)mobile communications where we derive the performance requirements to facilitate the evaluation of technical solutions.A rather complete design of unsourced multiple access is proposed in which two key parts:a compressed sensing module for active user detection,and a sparse interleaver-division multiple access(SIDMA)module are simulated side by side on a same platform at balanced signal to noise ratio(SNR)operating points.With a proper combination of compressed sensing matrix,a convolutional encoder,receiver algorithms,the simulated performance results appear superior to the state-of-the-art benchmark,yet with relatively less complicated processing.

基于Massive MIMO的5G基站能效优化研究

5G网络已成熟商用,但是其能效问题一直影响着5G发展,MassiveMIMO技术是提升网络覆盖、用户体验和系统容量的核心技术,可作为提升5G网络能效的一种手段。开展了基于蚁群算法的迭代寻优算法的研究,解决海量MIMO参数组合最优解迭代问题。同时构建了基于数字孪生技术的功率优化模型,实现5G网络能效的优化。模型实验和现网验证结果显示:该算法能够达到预期效果,为后续基站的能效优化和MIMO智慧优化演进提供参考。

Cartographic Study and Modeling of the Bakwanga Kimberlite Massive 5 at Kasai Oriental in the Democratic Republic of Congo

Bakwanga kimberlite massive 5 in Kasai Oriental is part of a set of 13 kimberlite massives numbered according to the order in which they were discovered. They are located on an alignment with a more or less W-E direction making up the Northern group known as Bakwanga. The importance of the Bakwanga kimberlite massives on the country’s economy in the production of diamonds sufficiently proves the interest of geological research work in this area. The objective of this work is to determine a mathematical model of the shape of the massive as close as possible to reality and through cartography. The cartographic study and modeling of this kimberlite massive were carried out using data from core samples taken on longitudinal and transverse profiles of the 50 × 50 meter mesh drilling plan intersecting this kimberlite massive. We intend to deduce the structure and lithostratigraphy of the kim-berlitic facies and the direct environment of massive 5. As a result, we note that the majority of surveys on the extent of this massive have intersected: Red clayey sand - Polymorphic sandstone - Nodular sandstone, with kaolin blocks and nodules - Epiclastic Kimberlite - Xenokimberlite - Massive Kimberlite - Mesozoic sandstone - Dolomite (enclosing). The shape of the Massive 5 model is vaguely elliptical with a W-E longitudinal axis of 575 m and N-S axis of 275 meters. Surveys have shown that Massive 5 is in fact composed of two pipes, located in the W (western pipe) and E (eastern pipe) ends of the massif. The two chimneys of the two pipes have walls ranging from subvertical at the eastern pipe to very steep walls of around 70˚ to 80˚ for the western pipe and the average diameter of the two pipes is ±50 meters. At level 600, the massive has an area of ±10.5 hectares and it gradually decreases in depth and the modeling of the latter shows a concentric decrease in the volume of the massive from the surface to depth in the shape of a mushroom. 3 eruptive phases established this Kimber-litic massive, the first two phases (old) of which formed the crater of the western pipe and the third formed the crater of the eastern pipe in the dolomites. These dolomites constitute everywhere the surrounding area of the massive;the distinction of these 3 phases is made possible thanks to Epiclastic deposits, Xenokim-berlites and massive Kimberlites.

地铁隧道有限空间Massive MIMO性能研究

基于实际场景测量,对地铁隧道有限空间Massive MIMO性能进行了研究。采用复用天线阵列法实现收发同步切换分时虚拟MIMO测量。基于测量数据,主要分析了3.5 GHz和5.6 GHz频段Massive MIMO信道在隧道场景的性能,研究了信道矩阵的特征值分布和条件数,着重分析了不同收发天线距离对Massive MIMO信道容量的影响,考虑了基于信噪比的有效秩选择方法。研究结果表明,在3.5 GHz及5.6 GHz频段上,Massive MIMO信道矩阵条件数的范围处在30 dB至55 dB之间,信道容量有较大的提升,且信道矩阵的有效秩随收发机距离增大的衰减趋势明显。以上结果对隧道场景下一代无线通信系统的设计与部署提供了依据。

Massive Unsourced Random Access Under Carrier Frequency Offset

Unsourced random access(URA)is a new perspective of massive access which aims at supporting numerous machine-type users.With the appearance of carrier frequency offset(CFO),joint activity detection and channel estimation,which is vital for multiple-input and multiple-output URA,is a challenging task.To handle the phase corruption of channel measurements under CFO,a novel compressed sensing algorithm is proposed,leveraging the parametric bilinear generalized approximate message passing framework with a Markov chain support model that captures the block sparsity structure of the considered angular domain channel.An uncoupled transmission scheme is proposed to reduce system complexity,where slot-emitted messages are reorganized relying on clustering unique user channels.Simulation results reveal that the proposed transmission design for URA under CFO outperforms other potential methods.

Joint Flexible Duplexing and Power Allocation with Deep Reinforcement Learning in Cell-Free Massive MIMO System

Network-assisted full duplex(NAFD)cellfree(CF)massive MIMO has drawn increasing attention in 6G evolvement.In this paper,we build an NAFD CF system in which the users and access points(APs)can flexibly select their duplex modes to increase the link spectral efficiency.Then we formulate a joint flexible duplexing and power allocation problem to balance the user fairness and system spectral efficiency.We further transform the problem into a probability optimization to accommodate the shortterm communications.In contrast with the instant performance optimization,the probability optimization belongs to a sequential decision making problem,and thus we reformulate it as a Markov Decision Process(MDP).We utilizes deep reinforcement learning(DRL)algorithm to search the solution from a large state-action space,and propose an asynchronous advantage actor-critic(A3C)-based scheme to reduce the chance of converging to the suboptimal policy.Simulation results demonstrate that the A3C-based scheme is superior to the baseline schemes in term of the complexity,accumulated log spectral efficiency,and stability.

DQL-Based Intelligent Scheduling Algorithm for Automatic Driving in Massive MIMO V2I Scenarios

Connected and autonomous vehicle(CAV)vehicle to infrastructure(V2I)scenarios have more stringent requirements on the communication rate,delay,and reliability of the Internet of vehicles(Io V).New radio vehicle to everything(NR-V2X)adopts link adaptation(LA)to improve the efficiency and reliability of road safety information transmission.In order to solve the problem that the existing LA scheduling algorithms cannot adapt to the Doppler shift and complex fast time-varying channel in V2I scenario,resulting in low reliability of information transmission,this paper proposes a deep Q-learning(DQL)-based massive multiple-input multiple-output(MIMO)LA scheduling algorithm for autonomous driving V2I scenario.The algorithm combines deep neural network(DNN)with Q-learning(QL)algorithm,which is used for joint scheduling of modulation and coding scheme(MCS)and space division multiplexing(SDM).The system simulation results show that the algorithm proposed in this paper can fully adapt to the different channel environment in the V2I scenario,and select the optimal MCS and SDM for the transmission of road safety information,thereby the accuracy of road safety information transmission is improved,collision accidents can be avoided,and bring a good autonomous driving experience.