Matching effect in superconducting NbN thin film with a square lattice of holes

A square hole array is fabricated over a micro-bridge of NbN thin film by electron beam lithography and reactive ion milling. Magneto-resistance is measured across the micro-bridge filled with a hole array near the superconducting transition temperature. It is found that magneto-resistance minima occur when the number of vortices is an integer multiple or a fractional multiple of the number of holes. The temperature and the current dependences of the matching effect are studied.

Vortex pinning and rectification effect in a nanostructured superconducting film with a square array of antidot triplets

We study the stability of vortices pinning and dynamics in a superconducting thin strip containing a square array of antidot triplets by using the nonlinear Ginzburg–Landau(GL)theory.Compared with the regular square array of circular holes,the vortices are no longer pinned inside the circular holes,but instead stabilized at the center of the antidot triplets depending on the geometry parameters.Moreover,the influences of the geometry parameters and the polarity of the applied current on the current–voltage(I–V)characteristics are also studied.The critical current for the sample turning into a normal state becomes smaller when the hole diameter D is smaller and the spacing B between the holes is larger.Due to the asymmetric pinning sites,our numerical simulations demonstrate that the positive and negative rectified voltages appear alternately in the resistive state of the sample under an ac current of square pulses.

Wire network behavior of superconducting films with lower symmetrical mesoscopic hole arrays

Superconducting films with the same hole density but different geometric symmetry have been designed and fabricated. The R(H) curves show obvious periodic oscillations with several dips at fractional matching fields. It is found that the period of the oscillations in the low field is not necessary equal to that derived from the hole density, but consistent with that from the corresponding wire networks when the large disk-like film regions are regarded as nodes. The experimental results of R(H), T_(c)(H) and j_(c)(H) at fractional matching fields within the first oscillation also support the rationality of considering films with large-diametered hole arrays as wire networks. Our results demonstrate that the connectivity of superconducting films with large-diametered hole arrays plays a more important role in the oscillations of R(H) curves.

Interstitial vortex in superconducting film with periodic hole arrays

The response of superconducting Nb films with a diluted triangular and square array of holes to a perpendicular magnetic field are investigated. Due to small edge-to-edge separation of the holes, the patterned films are similar to multi-connected superconducting islands. Two regions in the magnetoresistance R（H） curves can be identified according to the field intervals of the resistance minima. Moreover, in between these two regions, variation of the minima spacing was observed. Our results provide strong evidence of the coexistence of interstitial vortices in the islands and fluxoids in the holes.

Interstitial vortex in superconducting film with periodic hole arrays

The response of superconducting Nb films with a diluted triangular and square array of holes to a perpendicular magnetic field are investigated.Due to small edge-to-edge separation of the holes,the patterned films are similar to multi-connected superconducting islands.Two regions in the magnetoresistance R(H) curves can be identified according to the field intervals of the resistance minima.Moreover,in between these two regions,variation of the minima spacing was observed.Our results provide strong evidence of the coexistence of interstitial vortices in the islands and fluxoids in the holes.

Review on second-harmonic generation of ultrasonic guided waves in solid media(Ⅰ): Theoretical analyses

Considering the high sensitivity of the nonlinear ultrasonic measurement technique and great advantages of the guided wave testing method, the use of nonlinear ultrasonic guided waves provides a promising means for evaluating and characterizing the hidden and/or inaccessible damage/degradation in solid media. Increasing attention on the development of the testing method based on nonlinear ultrasonic guided waves is largely attributed to the theoretical advances of nonlinear guided waves propagation in solid media. One of the typical acoustic nonlinear responses is the generation of second harmonics that can be used to effectively evaluate damage/degradation in materials/structures. In this paper, the theoretical progress of second-harmonic generation（SHG） of ultrasonic guided wave propagation in solid media is reviewed. The advances and developments of theoretical investigations on the effect of SHG of ultrasonic guided wave propagation in different structures are addressed. Some obscure understandings and the ideas in dispute are also discussed.

Optimization of Thermal Conductivity of Alumina-Filled Composites by Numerical Simulations

Understanding the correlation between the physical features of composite components and thermal conductive pathway is beneficial to optimizing the overall heat-transfer performance.Herein,we conduct numerical simulation to investigate the thermal conductivity and heat flux distributions of alumina(Al_(2)O_(3))-filled composites.The finite element model was verified by both experimental data and theoretical models.The crucial factors include the influence of the interface thermal resistance,the intrinsic thermal conductivity of the matrix and Al_(2)O_(3)filler,and the size effect of Al_(2)O_(3)fillers were investigated.For single Al_(2)O_(3)-filled composites,the results indicate that increasing the intrinsic thermal conductivity of the matrix is conductive to bridge the Al_(2)O_(3)pathway along heat-transfer direction,but there are very limited contributions by enhancing the intrinsic thermal conductivity of Al_(2)O_(3)filler,tuning the size of Al_(2)O_(3)filler,and reducing the interface thermal resistance.After introducing the multiscale fillers,it is found that the high thermal conductivity can be achieved by regulating their size matching effect.At the optimal binary ratio of 70:30(40µm:15µm)and ternary ratio of 55:35:10(40µm:15µm:10µm),the heat-conduction network presents the dominant skeleton of large-sized filler and the bridging branch of small-sized fillers features,which facilitates the formation of a complete and continuous thermal conductive network.This study gives a practical guidance for the thermal conductive design of Al_(2)O_(3)-filled composites.