Power Matching and Energy Efficiency Improvement of Hydraulic Excavator Driven with Speed and Displacement Variable Power Source

Mobile machinery energy efficiency and emission pollution are the national and worldwide issues. This paper contributes in solving these problems by applying a speed variable power source. Unfortunately, almost all of the speed variable systems have the dynamic response problem when the motor starts with full load or heavy load. To address this problem, a hydraulic accumulator is used to balance the load of the power source for assisting starting of the motor and a matching method combined with speed and displacement control of the pump is proposed to improve the energy efficiency and dynamic performance simultaneously under different working conditions. Also, the power source/valve combined control strategy of an independent metering system is designed to realize flow matching of the whole system. Firstly, a test system is established to study the dynamic performance and energy efficiency of the speed variable power source with an auxiliary accumulator. Working performance and energy consumption of the power source under different rotating speeds and different loads are studied. And then, the hydraulic excavator test rig with the proposed system is constructed. Furthermore, the working performance of the excavator with the speed-fixed and speed-variable strategy are studied comparatively. Results show that, compared with fixed-speed strategy, the electric power consumption during the idle period and partial load condition can be reduced about 2.05 kW and 1.37 kW. The energy efficiency of speed variable power source is about 40%-71%, which is higher than that of the fixed-speed power source by 3%–10%.

Analysis of Power Matching on Energy Savings of a Pneumatic Rotary Actuator Servo-Control System

When saving energy in a pneumatic system,the problem of energy losses is usually solved by reducing the air supply pressure.The power-matching method is applied to optimize the air-supply pressure of the pneumatic system,and the energy-saving effect is verified by experiments.First,the experimental platform of a pneumatic rotary actuator servo-control system is built,and the mechanism of the valve-controlled cylinder system is analyzed.Then,the output power characteristics and load characteristics of the system are derived,and their characteristic curves are drawn.The employed air compressor is considered as a constant-pressure source of a quantitative pump,and the power characteristic of the system is matched.The power source characteristic curve should envelope the output characteristic curve and load characteristic curve.The minimum gas supply pressure obtained by power matching represents the optimal gas supply pressure.The comparative experiments under two different gas supply pressure conditions show that the system under the optimal gas supply pressure can greatly reduce energy losses.

Matching and Simulation of Power Parameters of Electric Transporter based on Cruise Software

In view of the characteristics of warehouse or freight yard carrying out transfer and loading conditions,the performance parameter matching of the power system of an electric transfer vehicle was studied,and the driving motor and power battery of the key components of the vehicle were reasonably selected.Cruise software was used to simulate the loading process of the vehicle.The results show that the performance design of the power system of the electric transport vehicle and its key components is reasonable,meeting the requirements of maximum speed,climbing performance and starting driving performance,and providing a reference and credible basis for the design of the power system of the vehicle.

OPTIMIZATION DESIGN METHOD FOR INPUT IMPEDANCE MATCHING NETWORK OF LOW NOISE AMPLIFIER

According to the theories of optimal noise match and optimal power match, a method for calculating the optimal source impedance of low noise amplifier （LNA） is proposed based on the input reflection coefficient S11. Moreover.with the help of Smith chart, the calculation process is detailed, and the trade-off between the lowest noise figure and the maximum power gain is obtained during the design of LNA input impedance matching network. Based on the Chart 0. 35-μm CMOS process, a traditional cascode LNA circuit is designed and manufactured. Simulation and experimental results have a good agreement with the theoretical analysis, thus proving the correctness of theoretical analysis and the feasibility of the method.

Matched Filter Based Spectrum Sensing When Primary User Has Multiple Power Levels

In this paper,we investigate the matched filter based spectrum sensing in a more reasonable cognitive radio(CR) scenario when the primary user(PU) has more than one transmit power levels,as regulated in most standards,i.e.,IEEE 802.11 Series,GSM,LTE,LTE-A,etc.This new multiple primary transmit power(MPTP) scenario is specialized by two different targets:detecting the presence of PU and identifying the power level.Compared to the traditional binary sensing where only the presence of PU is checked,SU may attain more information about the primary network(making CR more "intelligent") and design the subsequent optimization strategy.The key technology is the multiple hypothesis testing as opposed to the traditional binary hypothesis testing.We discuss two situations under whether the channel phase is known or not,and we derive the closed form solutions for decision regions and several performance metrics,from which some interesting phenomenons are observed and the related discussions are presented.Numerical examples are provided to corroborate the proposed studies.

Xiangfan Coal-fired Power Plant - a matched large power plant for Three Gorges Project starts to construct

Xiangfan Coal-fired Power Plant, a key energy construction project matched with Three Gorges Project, approved by the State Council. formally started to build in the suburb of Xiangfan City, Hubei Province on November 29, 1996.

Passive-source multitaper-spectral method based low-frequency data reconstruction for active seismic sources

Passive seismic data contain large amounts of low-frequency information. To effectively extract and compensate active seismic data that lack low frequencies, we propose a multitaper spectral reconstruction method based on multiple sinusoidal tapers and derive equations for multisource and multitrace conditions. Compared to conventional cross correlation and deconvolution reconstruction methods, the proposed method can more accurately reconstruct the relative amplitude of recordings. Multidomain iterative denoising improves the SNR of retrieved data. By analyzing the spectral characteristics of passive data before and after reconstruction, we found that the data are expressed more clearly after reconstruction and denoising. To compensate for the low-frequency information in active data using passive seismic data, we match the power spectrum, supplement it, and then smooth it in the frequency domain. Finally, we use numerical simulation to verify the proposed method and conduct prestack depth migration using data after low-frequency compensation. The proposed power-matching method adds the losing low frequency information in the active seismic data using the low-frequency information of passive- source seismic data. The imaging of compensated data gives a more detailed information of deep structures.

Symbol recognition and automatic conversion in GIS vector maps

Symbols are considered as the language of a map;hence,accurate understanding of the meaning of symbols is crucial when obtaining geographical information from a map： the symbolisation of spatial data is of key importance in cartography.A geographical information system（GIS） provides a convenient mapping platform and powerful functions for spatial data symbolisation,while the presence of various mapping standards impedes the understanding of maps and sharing of map information.On the other hand,the available GIS platforms find it difficult to deal with automatic conversion between maps and different mapping standards.To resolve this problem,an approach for symbol recognition and automatic conversion is proposed,and a conversion system based on the approach and the Arc GIS Engine platform is developed to realise automatic conversion between maps produced based on different mapping standards.To test these conversion effects of the proposed system,the petroleum sector is chosen as the research field and the mutual conversion of a map in practical work among the three mapping standards（i.e.the Chinese Petroleum,Shell and USGS standards） governing this field is taken as a casestudy.The results show that the conversion system has a high conversion accuracy and strong applicability.

CMOS Dual-Band Low Noise Amplifer

A CMOS dual-band low noise amplifer (LNA) design is presented.The purpose of th is work is intended to substitute only one LNA for two individual LNA's in dual -band transceivers for applications such as wireless local area network complying with both IEEE 802.11a and 802.11b/g.Dua l-band simultaneous input power and noise matching and load shaping are discuss ed.The chip is implemented in 0.25μm CMOS mixed and RF process.The measured pe rformance is summarized and discussed.

Integration of energy recovery network including recycling residual pressure energy with pinch technology

Work exchange is a promising innovative technology in recovering residual pressure energy. However, at the systematic level, the comprehensive utilization of different energy resources in an energy system has become an issue of concern. In this work, a systematic approach is proposed, one that successively integrates heat, work and adjusts operation parameters. A detailed procedure for building a heat-work coupling transfer network is provided. The synthesis mainly consists of constructing a work exchange sub-network with pinch analysis based on positive displacement type work exchangers. Simultaneously, another kind of sub-network based on turbine-type work exchangers is built as a schematic comparison. The influence of applying a positive displacement work exchanger on the system is investigated. Finally, as a case study, a renovation design of a typical rectisol process in the coal-water slurry gasification section of an ammonia plant is presented. The results show that the added work exchanger has little impact on the existing heat exchange sub-network. Moreover,extra pressure energy is recovered by coupling the transfer network. It is concluded that the heat-work systematic design is a promising and powerful method to use energy more efficiently.

Resource pre-allocation algorithms for low-energy task scheduling of cloud computing

In order to lower the power consumption and improve the coefficient of resource utilization of current cloud computing systems, this paper proposes two resource pre-allocation algorithms based on the ＂shut down the redundant, turn on the demanded＂ strategy here. Firstly, a green cloud computing model is presented, abstracting the task scheduling problem to the virtual machine deployment issue with the virtualization technology. Secondly, the future workloads of system need to be predicted： a cubic exponential smoothing algorithm based on the conservative control（CESCC） strategy is proposed, combining with the current state and resource distribution of system, in order to calculate the demand of resources for the next period of task requests. Then, a multi-objective constrained optimization model of power consumption and a low-energy resource allocation algorithm based on probabilistic matching（RA-PM） are proposed. In order to reduce the power consumption further, the resource allocation algorithm based on the improved simulated annealing（RA-ISA） is designed with the improved simulated annealing algorithm. Experimental results show that the prediction and conservative control strategy make resource pre-allocation catch up with demands, and improve the efficiency of real-time response and the stability of the system. Both RA-PM and RA-ISA can activate fewer hosts, achieve better load balance among the set of high applicable hosts, maximize the utilization of resources, and greatly reduce the power consumption of cloud computing systems.

A 900 MHz,21 dBm CMOS linear power amplifier with 35% PAE for RFID readers

A two-stage differential linear power amplifier （PA） fabricated by 0.18 μm CMOS technology is presented. An output matching and harmonic termination network is exploited to enhance the output power, efficiency and harmonic performance. Measurements show that the designed PA reaches a saturated power of 21.1 dBm and the peak power added efficiency （PAE） is 35.4%, the power gain is 23.3 dB from a power supply of 1.8 V and the harmonics are well controlled. The total area with ESD protected PAD is 1.2 × 0.55 mm2. System measurements also show that this power amplifier meets the design specifications and can be applied for RFID reader.