Emerging material engineering strategies for amplifying photothermal heterogeneous CO_(2)catalysis

Closing the carbon loop,through CO_(2)capture and utilization,is a promising route to mitigate climate change.Solar energy is a sustainable energy source which can be exploited to drive catalytic reactions for utilizing CO_(2),including converting the CO_(2)into useful products.Solar energy can be harnessed through a range of different pathways to valorize CO_(2).Whilst using solar energy to drive CO_(2)reduction has vast potential to promote catalytic CO_(2)conversions,the progress is limited due to the lack of understanding of property-performance relations as well as feasible material engineering approaches.Herein,we outline the various driving forces involved in photothermal CO_(2)catalysis.The heat from solar energy can be utilized to induce CO_(2)catalytic reduction reactions via the photothermal effect.Further,solar energy can act to modify reaction pathways through light-matter interactions.Light-induced chemical functions have demonstrated the ability to regulate intermediary reaction steps,and thus control the reaction selectivity.Photothermal catalyst structures and specific catalyst design strategies are discussed in this context.This review provides a comprehensive understanding of the heat-light synergy and guidance for rational photothermal catalyst design for CO_(2)utilization.

Integrated Computational Materials Engineering for the Development and Design of High Modulus Al Alloys

Integrated computational materials engineering(ICME)is to integrate multi-scale computational simulations and key experimental methods such as macroscopic,mesoscopic,and microscopic into the whole process of Al alloys design and development,which enables the design and development of Al alloys to upgrade from traditional empirical to the integration of compositionprocess-structure-mechanical property,thus greatly accelerating its development speed and reducing its development cost.This study combines calculation of phase diagram(CALPHAD),Finite element calculations,first principle calculations,and microstructure characterization methods to predict and regulate the formation and structure of composite precipitates from the design of highmodulus Al alloy compositions and optimize the casting process parameters to inhibit the formation of micropore defects in the casting process,and the final tensile strength of Al alloys reaches420 MPa and Young's modulus reaches more than 88 GPa,which achieves the design goal of the high strength and modulus Al alloys,and establishes a new mode of the design and development of the strength/modulus Al alloys.

Molecular Dynamics (MD) Applications in Materials Science and Engineering and Nanotechnology

Molecular dynamics (MD) is a computer simulation technique that helps to explore the behavior and properties of molecules and atoms. MD has been used in research and development in many spaces, including materials science and engineering and nanotechnology. MD has been proven useful in topics like the nano-engineering of construction materials, correcting graphene planar defects, studying self-assembling bio-materials, and the densification, consolidation, and sintering of nanocrystalline materials.

The design and engineering strategies of metal tellurides for advanced metal-ion batteries

Owning various crystal structures and high theoretical capacity,metal tellurides are emerging as promising electrode materials for high-performance metal-ion batteries(MBs).Since metal telluride-based MBs are quite new,fundamental issues raise regarding the energy storage mechanism and other aspects affecting electrochemical performance.Severe volume expansion,low intrinsic conductivity and slow ion diffusion kinetics jeopardize the performance of metal tellurides,so that rational design and engineering are crucial to circumvent these disadvantages.Herein,this review provides an in-depth discussion of recent investigations and progresses of metal tellurides,beginning with a critical discussion on the energy storage mechanisms of metal tellurides in various MBs.In the following,recent design and engineering strategies of metal tellurides,including morphology engineering,compositing,defect engineering and heterostructure construction,for high-performance MBs are summarized.The primary focus is to present a comprehensive understanding of the structural evolution based on the mechanism and corresponding effects of dimension control,composition,electron configuration and structural complexity on the electrochemical performance.In closing,outlooks and prospects for future development of metal tellurides are proposed.This work also highlights the promising directions of design and engineering strategies of metal tellurides with high performance and low cost.

Research on Copyright Protection Method of Material Genome Engineering Data Based on Zero-Watermarking

In order to effectively solve the problem of copyright protection of materials genome engineering data,this paper proposes a method for copyright protection of materials genome engineering data based on zero-watermarking technology.First,the important attribute values are selected from the materials genome engineering database;then,use the method of remainder to group the selected attribute values and extract eigenvalues;then,the eigenvalues sequence is obtained by the majority election method;finally,XOR the sequence with the actual copyright information to obtain the watermarking information and store it in the third-party authentication center.When a copyright dispute requires copyright authentication for the database to be detected.First,the zero-watermarking construction algorithm is used to obtain an eigenvalues sequence;then,this sequence is XORed with the watermarking information stored in the third-party authentication center to obtain copyright information to-be-detected.Finally,the ownership is determined by calculating the similarity between copyright information to-be-detected and copyright information that has practical significance.The experimental result shows that the zero-watermarking method proposed in this paper can effectively resist various common attacks,and can well achieve the copyright protection of material genome engineering database.

Department of Metallurgy and Materials Engineering of Chongqing University

Chongqing University is located inChongqing City,Sichuan Province.Foundedoriginally in 1929,the university has sincethen greatly expanded in its scope ofeducation and organization.Now it becomesone of China’s key universities of scienceand engineering with 18 departments and38 specialities.In addition it has 20 researchinstitutes and about one hundred laboratories.The department of metallurgy and ma-terials engineering of Chongqing University

Examination of the Thermal Cloaking Effectiveness with Layered Engineering Materials

The concentrically layered thermal cloaks with isotropic materials could realize the equivalent thermal cloaking effect with Pendry＇s cloak, while the effectiveness is scarcely investigated quantitatively. Here we examine the cloaking effectiveness quantitatively by evaluating the standard deviation of the temperature difference between the simulated plane with the layered thermal cloak and Pendry＇s thermal cloak. The design rules for the isotropic materials in terms of thermal conductivity and layer thickness are presented. The present method could quan- titatively evaluate the cloaking effectiveness, and could open avenues for analyzing the cloaking effect, detecting the （anti-） cloaks, etc.

Creative Economy and Materials Science & Engineering

New materials are fundamental to the growth,security,and quality of life of human being sand open doors to technologies in civil,chemical,nuclear,aeronautical,mechanical,biomedical,and electrical engineering.Creative companies use multiple materials in the development of their activities,such as solid stone,fiber glass,concrete,and glass reinforced concrete,for example.Based on bibliographic research,the article examines the synergy between materials science&engineering and creative economy.The main argument indicates that this synergy creates solutions and functionalities that add value to existing products and allow the development of new products with competitive advantages.It may also contribute to the preservation of cultural values and promote sustainability.

Materials Science-Technology and Intelligent Engineering

This paper analyses the peculiar acting mechanism of artificial neural network (ANN) tech, and explores the great immediate significence for the intelligent sci-tech (IST) to research and develop the nano-tech.

Research progress in CALPHAD assisted metal additive manufacturing

Metal additive manufacturing(MAM)technology has experienced rapid development in recent years.As both equipment and materials progress towards increased maturity and commercialization,material metallurgy technology based on high energy sources has become a key factor influencing the future development of MAM.The calculation of phase diagrams(CALPHAD)is an essential method and tool for constructing multi-component phase diagrams by employing experimental phase diagrams and Gibbs free energy models of simple systems.By combining with the element mobility data and non-equilibrium phase transition model,it has been widely used in the analysis of traditional metal materials.The development of CALPHAD application technology for MAM is focused on the compositional design of printable materials,the reduction of metallurgical imperfections,and the control of microstructural attributes.This endeavor carries considerable theoretical and practical significance.This paper summarizes the important achievements of CALPHAD in additive manufacturing(AM)technology in recent years,including material design,process parameter optimization,microstructure evolution simulation,and properties prediction.Finally,the limitations of applying CALPHAD technology to MAM technology are discussed,along with prospective research directions.

Ultrahard X-ray multifunctional application beamline at the SSRF

The ultrahard X-ray multifunctional application beamline(BL12SW)is a phase-II beamline project at the Shanghai Syn-chrotron Radiation Facility.The primary X-ray techniques used at the beamline are high-energy X-ray diffraction and imaging using white and monochromatic light.The main scientific objectives of ultrahard X-ray beamlines are focused on two research areas.One is the study of the structural properties of Earth’s interior and new materials under extreme high-temperature and high-pressure conditions,and the other is the characterization of materials and processes in near-real service environments.The beamline utilizes a superconducting wiggler as the light source,with two diamond windows and SiC discs to filter out low-energy light(primarily below 30 keV)and a Cu filter assembly to control the thermal load entering the subsequent optical components.The beamline is equipped with dual monochromators.The first was a meridional bending Laue monochromator cooled by liquid nitrogen,achieving a full-energy coverage of 30-162 keV.The second was a sagittal bending Laue monochromator installed in an external building,providing a focused beam in the horizontal direction with an energy range of 60-120 keV.There were four experimental hutches:two large-volume press experimental hutches(LVP1 and LVP2)and two engineering material experimental hutches(ENG1 and ENG2).Each hutch was equipped with various near-real service conditions to satisfy different requirements.For example,LVP1 and LVP2 were equipped with a 200-ton DDIA press and a 2000-ton dual-mode(DDIA and Kawai)press,respectively.ENG1 and ENG2 provide in situ tensile,creep,and fatigue tests as well as high-temperature conditions.Since June 2023,the BL12SW has been in trial operation.It is expected to officially open to users by early 2024.

Materials genome engineering accelerates the research and development of organic and perovskite photovoltaics

The emerging photovoltaic(PV)technologies,such as organic and perovskite PVs,have the characteristics of complex compositions and processing,resulting in a large multidimensional parameter space for the development and optimization of the technologies.Traditional manual methods are time-consuming and laborintensive in screening and optimizing material properties.Materials genome engineering(MGE)advances an innovative approach that combines efficient experimentation,big database and artificial intelligence(AI)algorithms to accelerate materials research and development.High-throughput(HT)research platforms perform multidimensional experimental tasks rapidly,providing a large amount of reliable and consistent data for the creation of materials databases.Therefore,the development of novel experimental methods combining HT and AI can accelerate materials design and application,which is beneficial for establishing material-processing-property relationships and overcoming bottlenecks in the development of emerging PV technologies.This review introduces the key technologies involved in MGE and overviews the accelerating role of MGE in the field of organic and perovskite PVs.

Study on Landscape Application of Glass Materials

Landscape architecture engineering materials change rapidly. Glass is a kind of isotropic amorphous homogeneous non-crystal materials which are of diverse types, complex composition, plasticity, mirror property, abrasion resistance, durability and texture. Therefore, more attention should be paid on the application of land- scape materials.

Optimization of clay material mixture ratio and filling process in gypsum mine goaf

Because there is neither waste rock nor mill tailings in the gypsum mine, and the buildings on the goaf of gypsum mine are needed to be protected, the research proposed the scheme of the clay filling technology. Gypsum, cement, lime and water glass were used as adhesive, and the strength of different material ratios were investigated in this study. The influence factors of clay strength were obtained in the order of cement, gypsum, water glass and lime. The results show that the cement content is the determinant influence factor, and gypsum has positive effects, while the water glass can enhance both clay strength and the fluidity of the filing slurry. Furthermore, combining chaotic optimization method with neural network, the optimal ratio of composite cementing agent was obtained. The results show that the optimal ratio of water glass, cement, lime and clay (in quality) is 1.17:6.74:4.17:87.92 in the process of bottom self-flow filling, while the optimal ratio is 1.78:9.58:4.71:83.93 for roof-contacted filling. A novel filling process to fill in gypsum mine goaf with clay is established. The engineering practice shows that the filling cost is low, thus, notable economic benefit is achieved.

Scoping biology-inspired chemical engineering

Biology is a rich source of great ideas that can inspire us to find successful ways to solve the challenging problems in engineering practices including those in the chemical industry. Bio-inspired chemical engineering(Bio Ch E)may be recognized as a significant branch of chemical engineering. It may consist of, but not limited to, the following three aspects: 1) Chemical engineering principles and unit operations in biological systems; 2) Process engineering principles for producing existing or developing new chemical products through living ‘devices';and 3) Chemical engineering processes and equipment that are designed and constructed through mimicking(does not have to reproduce one hundred percent) the biological systems including their physical–chemical and mechanical structures to deliver uniquely beneficial performances. This may also include the bio-inspired sensors for process monitoring. In this paper, the above aspects are defined and discussed which establishes the scope of BioChE.

Future Development of Ocean Engineering in China

Analysis is given to energy sources home and abroad, the employed and customer market in oceanographic engineering and necessity of its development. Risk out of system is put forward just after marine industry into oceanographic engineering market. It also metions several influencing factors including politics, finance and ocean engineering materials.

Structural engineered living materials

Biological structural materials not only exhibit remarkable mechanical properties but also often embody dynamic characteristics such as environmental responsiveness,autonomy,and self-healing,which are difficult to achieve in conventional engineering materials.By merging materials science,synthetic biology,and other disciplines,engineered living materials(ELMs)provide a promising solution to combine living organisms with abiotic components,thus facilitating the construction of functional“living”materials.Like natural materials,ELMs possess vitality and hold immense application potential in areas such as medicine,electronics,and construction,captivating increasing research attention recently.As an emerging branch of ELMs,structural ELMs aim to mimic living biological structural materials by achieving desired mechanical performance while maintaining important“living”characteristics.Here we summarize the recent progress and provide our perspectives for this emerging research area.We first summarize the superiority of structural ELMs by reviewing biological structural materials and biomimetic material design strategies.Subsequently,we provide a systematic discussion on the definition and classifications of structural ELMs,their mechanical performance,and physiological behaviors.Finally,we summarize some critical challenges faced by structural ELMs and highlight directions of future development.We hope this review article can provide a timely summary of the state of the art and relevant perspectives for future development of structural ELMs.

Smart Design and Manufacturing the Welded Q350 Steel Frames via Lifecycle Management Strategy of Digital Twin

Artificial intelligent aided design and manufacturing have been recognized as one kind of robust data-driven and data-intensive technologies in the integrated computational material engi-neering(ICME)era.Motivated by the dramatical developments of the services of China Railway High-speed series for more than a decade,it is essential to reveal the foundations of lifecycle man-agement of those trains under environmental conditions.Here,the smart design and manufacturing of welded Q350 steel frames of CR200J series are introduced,presenting the capability and opportu-nity of ICME in weight reduction and lifecycle management at a cost-effective approach.In order to address the required fatigue life time enduring more than 9×10^(6)km,the response of optimized frames to the static and the dynamic loads are comprehensively investigated.It is highlighted that the maximum residual stress of the optimized welded frame is reduced to 69 MPa from 477 MPa of previous existing one.Based on the measured stress and acceleration from the railways,the fatigue life of modified frame under various loading modes could fulfil the requirements of the lifecycle man-agement.Moreover,our recent developed intelligent quality control strategy of welding process mediated by machine learning is also introduced,envisioning its application in the intelligent weld-ing.