Isotope Geochemical Characteristics and Material Sources of Tin--Bearing Porphyries in South China

Tin-bearing porphyries in South China can be divided into the F-rich and F-poorsubtypes. They are high-silica (SiO_2>71%), peraluminous (A/NKC>1.0) and rich inincompatible elements (Rb, Zr, U, W, Sn) and have weak Ce (δCe=0.68-0.82) and strong Eu(δEu=0.01-0.38) negative anomalies. Meantime, they also have low δ_(Nd)(-6.3- -8.4), high^(207)Pb/^(204)Pb (15.588-15.790), medium to high (^(87)Sr/^(86)Sr)_i (0.7084-0.7287) and relatively highδ^(18)O(9.1-10.3‰). These characteristics clearly suggest that the two subtypes of tin-bearingporphyries were derived from the crustal materials. Their differences lie only in the existence ofcertain different components in their source materials. Therefore, there is only one type oftin-bearing prophyry in South China. that is continental crust transformation type.

New Sr Isotope Evidence to Support the Material Source of the Mengyejing Potash Deposit in the Simao Basin from Ancient Marine Halite or Residual Sea

Objective The Mengyejing potash deposit in the Simao Basin is the only producing area of solid potash at present in China. There is still controversy about the material source and distribution of the potash in this deposit （Shen Lijian et al., 2017）, which has influenced not only the prospecting direction and efficiency but also the understanding of the control of Tethys tectonic evolution on the formation and distribution of the mineral resources. This work analyzed the Sr isotope geochemical characteristics of evaporites from core samples in the well MZK-3 in order to further clarify the material source and to explore the potash distribution in the Simao Basin.

Geochemical Tracing of Ore-forming Material Sources of Carlin-type Gold Deposits in the Yunnan-Guizhou-Guangxi Triangle Area --A Case Study of the Application of the Combined Silicon Isotopes Geochemistry and Siliceous Cathodoluminescence Analysis

Abstract This paper deals with characteristics of silicon isotope compositions and siliceous cathodoluminescence of host rocks, ores and hydrothermal silicified quartz of the Carlin-type ore deposits in the Yunnan-Guizhou-Guangxi triangle area. The study shows that primary silicified quartz is nonluminescent but quartz in host rocks and secondary silicified quartz are luminescent by the action of cathode rays. Correspondingly, silicon isotope compositions of host rocks, ores and hydro6thermal quartz veins are clearly distinguished. In strata from the Middle Triassic to the “Dachang” host bed, δ30Si of the host rocks ranges from 0.0% ?0.3%, while that of primary ore-forming silicified fluids from ?0.1% to ?0.4%; in the Upper Permian and Lower Carboniferous strata and Indosinian diabase host beds, δ30Si of the host rocks is from ?0.1% to ?0.2% and that of the primary silicified quartz veins from 0.3 % ?0.5 %. This pattern demonstrates the following geochemical mineralization process, primary ore-forming siliceous fluids migrated upwards quickly along the main passages of deep-seated faults from mantle to crust and entered secondary faults where gold deposits were eventually formed as a result of permeation and replacement of the siliceous ore-forming fluids into different ore-bearing strata. This gives important evidence for the fact that ore-forming fluids of this type of gold deposits were mainly derived from upper mantle differentiation and shows good prospects for deep gold deposits and geochemical background for large and superlarge gold deposits.

Ore-Forming Material Sources of the Shizishan Pb-Zn Deposit in Western Hunan Province,China

Objective The Shizishan Pb-Zn deposit is located in the southeastern margin of the Yangtze Block,and its Pb-Zn orebodies are mainly hosted in the Lower Cambrian Qingxudong Formation limestone.Previous researches have investigated the geological characteristics,geochemistry and fluid inclusions of this deposit.

Rare Earth Elements Geochemistry of Laowan Gold Deposit in Henan Province: Trace to Source of Ore-Forming Materials

The compositions of REE in quartz and pyrite from the main stage of the Laowan gold deposit in Henan Province and that in quartz from Laowan granite were determined by inductively coupled plasma-mass-spectrometry （ICP-MS） to trace the source of ore-forming materials. Meanwhile, the REE compositions of the deposit ore, granite and metamorphic wall rock were also considered for comparative studies in detail. The range of ∑REE of quartz and pyrite from the deposit ores is 4.18 × 10^-6- 30.91 × 10^-6, the average of ∑REE is 13.39 × 10^-6, and the average of ∑REE of quartz in the Laowan granite is 6.68 × 10^-6. There is no distinct difference of REE parameters between the deposit ore quartz and granite quartz. The quartz in gold deposit has the same REE particular parameters as quartzes from Laowan granite, such as δEu, δCe, （La/Yb）N and （La/Sm）N, partition degree of LREE to HREE, especially, the chondrite-normalized REE patterns, but no similarity to those from metamorphic wall rock, which shows that ore-forming hydrothermal fluid is mainly the fluid coming from the Laowan granite magma, rather than metamorphic fluid. Meanwhile, comparison studies on REE features between minerals from the deposit ores and related geological bodies in the deposit show that REE characteristics of minerals can serve as an indicator of ore-forming fluid properties and sources, while the REE characteristics of the bulk samples （such as deposit ores, granites and wall rocks） can not trace the source of the ore-forming materials exactly.

Classification and Source Materials of Continental Crust Transformation Series Granitoids in South China

The granitoids of the continental crust transformation series in South China may be divided into threetypes: (1) synorogenic migmatic and magmatic type. (2) anorogenic continental crust anatexis type, and (3)syncollision type. Based on the results of Sr and Nd isotopic determinations, the source material compositionof the three types of granitoids is calculated with crust-mantle binary mixing simulation. The calculations indi-cate that the granitoids of the first type consist of 78.6-89.7% upper crust endmember materials and15.0-10.3% depleted mantle endmember materials, the granitoids of the second type are composed of 63.7%upper crust endmember materials and 36.3% depleted mantle endmember materials, and those of the third type100% upper crust endmember materials. Hence. the source material composition of the granitoids of all thethree types is dominated by upper crust endmembers.

Ore-forming fluid characteristics and ore-forming materials source of the Tudimiaogou – Yindongshan lead-zinc polymetallic orefield, west Henan

1 Introduction The Tudimiaogou-Yindongshan lead-zinc polymetallic orefield is located in the Tudimiaogou-Weimoshi lead and zinc silver polymetallic metallogenic belt.The belt is an important part of southwestern Henan lead and zinc

Rare Earth Element Geochemistry Characteristics of Laowan Gold Deposit in Henan Province: Trace to Source of Ore-Forming Materials

The compositions of REE in quartz and pyrite from main mineralized stage of the Laowan gold deposit in Henan province and that of quartz from Laowan granite were determined by Inductively Coupled Plasma-Mass-Spectrometry （ICP-MS）. The REE of deposit ore of the Laowan gold deposit, wall-rock and Laowan granite also were studied to trace the source of metallogenic materials in Laowan gold deposit in detail. The range of ∑ REE in quartz and pyrite from gold deposit is 4.18 × 10^-6 - 30.91 × 10^-6, average of 13.39 × 10^-6, 6.68 × 10^-6 of the Laowan granite quartz, obviously lower to REE concentration of deposit, granite and wall-rock. The value of （La/ Yb）N and （La/Sm）N of ore minerals from the gold deposit is 13.23 and 4.17 respectively. The differences in REE parameters, such as δEu, δCe and diffusion degree in REE from light to heavy, among deposit ore minerals and granite mineral are weak. Especially, there are no differences between the chondrite-normalised REE curves of minerals from gold deposit and those of quartzs in Laowan granite, no similarity to wall-rock＇, which shows that ore-forming hydrothermal fluid mainly came from magma fluid resulting from the Laowan granite magma, metamorphic fluid in few. The results also show that REE characteristics of ore minerals in deposit are effective for disclosing oreforming fluid quality comparing with deposit ore＇REE compositions.

The Lithospheric Structure in the South China Block from Receiver Function: Implications for the Source of Mineral System

The South China block(SC),composed of Cathaysia(CA),Jiangnan Orogenic belt(JNB),and Yangtze block(YB),is one of the most important poly-metallic metallogenic provinces in the world(Zhang et al.,2013),containing of four famous major Mesozoic metallogenic belts,involving the Middle-Lower Yangtze Fe-Cu-Au metallogenic belt(MYMB).

Study on REEs as tracers for late permian coal measures in Bijie City,Guizhou Province,China

Analyses of Rare Earth Elements （REEs） in 13 coal samples collected from Late Permian coal measures of Bijie City in western Guizhou Province were conducted using Inductively Coupled Plasma-Mass-Spectrometry （ICP-MS）. The results indicated that REEs patterns were not controlled by materials from the sea, whereas the contribution of land plants was about 1%. The major sources of REEs were from terrigenous material as indicated by negative Eu anomaly. There were similar distribution curves of REEs between Bijie＇s coal and Emeishan basalt. M12 coal seam, which had the highest ∑REE, appeared near the boundary between Longtan Formation and Changxing Formation, which was closely correlated to the eruption of Emeishan basalt. The Emeishan basalt contributed to REEs enrichment of M12. So the sources of REEs were controlled by terrigenous material, and the Emeishan basalt was the predominant source of terrigenous material, which dominated the enrichment and pattern of REEs in Late Permian coal measure from Bijie.

Spatial distributions of organic carbon and nitrogen and their isotopic compositions in sediments of the Changjiang Estuary and its adjacent sea area

The spatial distribution patterns of total organic carbon and total nitrogen show significant correlations with currents of the East China Sea Shelf. Corresponding to distributions of these currents, the study area could be divided into four different parts. Total organic carbon, total nitrogen, and organic carbon and nitrogen stable isotopes in sediments show linear correlations with mean grain size, respectively, thus ＂grain size effect＂ is an important factor that influences their distributions. C/N ratios can reflect source information of organic matter to a certain degree. In contrast, nitrogen stable isotope shows different spatial distribution patterns with C/N and organic carbon stable isotope, according to their relationships and regional distributions. The highest contribution （up to 50%） of terrestrial organic carbon appears near the Changjiang Estuary with isolines projecting towards northeast, indicating the influence of the Changjiang dilution water. Terrestrial particulate organic matter suffers from effects of diagenesis, benthos and incessant inputting of dead organic matter of plankton, after depositing in seabed. Therefore, the contribution of terrestrial organic carbon to particulate organic matter is obviously greater than that to organic matter in sediments in the same place.

Geology and Lead-Sulphur Isotope Compositions of the Tongyu Volcanic-Hosted Massive Sulphide Copper Deposit in the Western Part of the North Qinling Orogen, China

The Tongyu copper deposit, located in the western part of the North Qinling Orogen, China, is one of several volcanic-hosted massive sulphide（VHMS） deposits with industrial value and is also a typical example of mineralization related to the subduction and metallogenesis during the Caledonian orogeny. We conducted systematic lead-sulphur isotope geochemical analyses of the Tongyu deposit to understand the possible ore-forming material sources and tectonic settings. Twenty-six sulphide samples yielded clustered δ^34SCDT values of 1.13‰-3.36‰, average 2.22‰, and show a tower-type distribution,implying that the sulphur of the Tongyu copper deposit mainly originated from a mantle source. The Pb isotope compositions of sulphides（^206Pb/^204Pb = 17.59225-18.56354, average 18.32020; ^207Pb/^204Pb =15.51770-15.69381, average 15.66217; ^208Pb/^204Pb= 37.99969-39.06953, average 38.52722） are close to the values of the volcanic host rocks（^206Pb/^204PbPb= 18.10678-18.26293, average 18.21158; ^207Pb/^204PbPb =15.63196-15.68188, average 15.65345; ^208Pb/^204PbPb= 38.43676-38.56360, average 38.49171）, thus consistent with the Pb in ores and volcanic host rocks having been derived from a common source that was island-arc Pb related to oceanic crust subduction. The northward subduction of the Palaeo-Qinling oceanic crust triggered dehydration of the slab, which generated a large amount of high-oxygen-fugacity aqueous hydrothermal fluid. The fluid rose into the mantle wedge, activated and extracted metallogenic material and promoted partial melting of the mantle wedge. The magma and ore-forming fluid welled up and precipitated, finally forming the Tongyu VHMS copper deposit.

The geological significance of fossils in the coastal loess in the Bohai Straits and Liaodong Peninsula

Based on the analysis of the characteristics of the fossils (mollusks, Radiolaria, planktonic and benthic Foraminifera and Ostracoda) found in the four loess profiles located respectively at Heishigou and Beizhuang Villages on Daheishan Island in the Miaodao Islands in the Bohai Straits, and Daweijia and Yujiawaizi Villages in Jinzhou County, Liaodong Peninsula, the distribution and abundance variation of the fossils in vertical profiles are studied, the source of coastal loess is probed and the relationship between loess deposition and paleoclimatic environment as well as sea-level changes is discussed.

A Metallogenic Model of Gold Deposits of the Jiaodong Granite-Greenstone Belt

An analysis of trace elements and isotopic geochemistry suggest that the ore-forming materials of gold deposits in the Jiaodong granite-greenstone belt have multiple sources, especially the mantle source. Seismic wave, magnetic and gravity fields show that the crust-mantle structure and its coupling mechanism are the fundamental dynamic causes for the exchange and accumulation of materials and energy in the metallogenic system. Considering the evolution history of the structural setting, the tectono-metallogenic dynamics model of the area can be summarized as follows: (1) occurrence of the greenstone belt during the Archean-Proterozoic-the embryonic form of Au-source system; (2) stable tectonic setting in the Paleozoic-an intermittence in gold mineralization; (3) intensive activation and reformation of the greenstone belt in the Mesozoic-tectono-mineralization and tectono-diagensis; (4) posthumous structural activity in the Cenozoic-destruction of orebodies in the later stage. In the middle and late Indosinian, the Tancheng-Lujiang fault zone cut deeply into the upper mantle so that the ore-bearing fluids migrated to higher layers through the crust-mantle interaction, resulting in alteration and mineralization.

Geochemical characteristics of rare earth elements and their implications for the Huachanggou gold deposit in Shaanxi Province, China

The Huachanggou gold deposit is located in the south part of the Mian-Lue suture zone in the Qinling orogenic belt. Rare earth element （REE） concentrations determined by ICP-MS are shown to characterize the ore samples and their wall rocks in three ore zones in order to reveal the origin of ore-forming materials and fluid. In AuI, REE chondrite normalized patterns of ore are similar to those of ore-controlling spilite; the ore-forming materials originated from deep magma, and magmatic activity offered main hydrothermal source for gold mineralization. The REE characteristics of AuII and AuIII are similar, and most of the ore samples are similar with the wall rocks. The ore-forming fluids of AuII and AuIII were metamorphic hydrothermal fluids which had extracted ore-forming materials part from the wall rocks, and part from the spilite in AuI.

Challenges and opportunities for spintronics based on spin orbit torque

Spintronic devices based on spin orbit torque(SoT)have become the most promising pathway to the nextgeneration of ultralow-power nonvolatile logic and memory applications.Typical SOT-based spintronic devices consist of two functional materials:a spin source and a magnetic material.Spin source materials possess a strong spin orbit coupling,enabling efficient interconversion between charge and spin current,Magnetic materials are used to process and archive the information via the interaction between the local magnetic moment and the spin current generated from spin source.Considerable efforts have been put into the design of materials and devices in the past decades to realize the electrical control of magnetic switching.However,a number of key challenges stll remain to be addressed for the practical application.In this paper,we reviewed the development of a range of novel materials for both the spin source and the magnetic functionalities,particularly the complex oxides and organic spintronic materials.We also discussed and highlighted several key issues,such as the mechanism and manipulation of SOT and the large-scale integration of sOT-based devices,which merit more attention in the future.

Managing obsolescence of embedded hardware and software in secure and trusted systems

Obsolescence of integrated systems which contain hardware and software is a problem that affects multiple industries and can occur for many reasons,including technological,economic,organizational,and social factors.It is especially acute in products and systems that have long life cycles,where a high rate of technological innovation of the subcomponents result in a mismatch in life cycles between the components and the systems.While several approaches for obsolescence forecasting exist,they often require data that may not be available.This paper describes an approach using non-probabilistic scenarios coupled with decision analysis to investigate how particular scenarios influence priority setting for products and systems.Scenarios are generated from a list of emergent and future conditions related to obsolescence.The key result is an identification of the most and least disruptive scenarios to the decision maker’s priorities.An example is presented related to the selection of technologies for energy islanding,which demonstrates the methodology using six obsolescence scenarios.The paper should be of broad interest to scholars and practitioners engaged with enterprise risk management and similar challenges of large-scale systems.