Preparation and Performance Research of Cement-based Grouting Materials with High Early Strength and Expansion

Main performance of the cement grouting materials made up by Portland cement（PC） and sulphoaluminate cement（SAC） was investigated in this program, a kind of expanding agent（EA） which was mainly constituted by metakaolin and alunite was utilized for the compensation of the shrinkage, the hydration products and micro structure of the grouting materials were researched by X-ray diffraction（XRD） and scanning electron microscopy（SEM）. The results showed that a high expansion rate of the grouting materials could be reached as the expanding agent mixed in 6% of PC mass; the addition of SAC in the S2（PC：SAC：EA=34：6：2.25） brought a further improvement of the expansion rate of the grouting materials, the analysis of XRD and SEM showed that due to the reaction of expanding agent and SAC in the grouting materials, more ettringite crystal was generated, which resulted in a higher early strength, the addition of SAC played an expansion and strength reinforcement role in the grouting materials.

Influence of Cathode Materials on Opening Performance of Plasma Opening Switch

Experiments have been conducted on a plasma opening switch (POS) test-bed to investigate the influence of cathode materials made of aluminum, stainless steel, molybdenum and tungsten on opening performance for conduction time up to 3 microseconds, conduction current up to 100 kA. Remarkaly different opening characteristics have been shown for these materials,with tungsten being of the best opening performance.

Chinese RE Performance Materials on the Fast Developing Way (Continued)

(2) Other Magnetic Materials RE Giant Magnetostrictive Materials (GMM) Research of GMM in China started since 1980s but developed rapidly. The products can be produced in batches today. However, application of such materials in apparatus is laggard than developed countries. GMM materials are mainly applied in step motors, linear actuators, ultrasonic systems, sonar systems, valves, precise controls, active vibration damping etc. It is estimated that the near 10 years will be the fast developing period of global GMM market. Global production of GMM materials during 1989 to 2005 is listed in Table 3.

Summary of the Performance of V_(2)O_(5)Materials as Lithium Battery Cathode

Lithium battery has recently gained more and more attention worldwide.It has wide usage that range from toys to electric cars.Choosing a suitable material that best fits the overall performance as electrode for the battery is very essential.For cathode material,apart from the traditional and widely-used LiCoCO_(2),LiFePO_(4)and so on,there are innovations that include the use of V_(2)O_(5).Researches have been done focusing on how to further improve the performance for V_(2)O_(5)cathode in terms of different structure,forms or combination with other chemical molecules.This research paper will make a summary of the materials derived from traditional V_(2)O_(5)as well as their performances.

MULTI-SCALE AND MULTI-PHASE NANOCOMPOSITE CERAMIC TOOLS AND CUTTING PERFORMANCE

An advanced ceramic cutting tool material Al2O3/TiC/TiN （LTN） is developed by incorporation and dispersion of micro-scale TiC particle and nano-scale TiN particle in alumina matrix. With the optimal dispersing and fabricating technology, this multi-scale and multi-phase nanocomposite ceramic tool material can get both higher flexural strength and fracture toughness than that of A1203/TiC （LZ） ceramic tool material without nano-scale TiN particle, especially the fracture toughness can reach to 7.8 MPa . m^0.5. The nano-scale TiN can lead to the grain fining effect and promote the sintering process to get a higher density. The coexisting transgranular and intergranular fracture mode induced by micro-scale TiC and nano-scale TiN, and the homogeneous and densified microstructure can result in a remarkable strengthening and toughening effect. The cutting performance and wear mechanisms of the advanced multi-scale and multi-phase nanocomposite ceramic cutting tool are researched.

Microscopic properties and sealing performance of new gas drainage drilling sealing material

The geological condition of Chinese coal mines are complex and high gassy,which account for ffty percent to seventy percent.Because of the abundant pores and cracks around the drainage drilling hole,the gas concentration attenuates rapidly,and the effective gas drainage period is short.The traditional sealing materials of yellow mud and cement-sand grout will readily shrink after the drilling hole is sealed,the sealing length is short and the sealing quality is not satisfactory.Currently widely used polyurethane material will shrink when it comes into contact with water,and the price is also very high.In this study,taking cement as a base material,a novel composite sealing material mixed by expansion admixture,additive,and fbrin and coupling agent was developed and the sealing performance and expansion property of the material were also studied and analyzed.The FEI Quanta TM 250 environmental scanning electron microscope was used to investigate the microstructure of material.The results revealed that the new composite sealing material had a desirable expansion performance and a defnite fluidity convenient for grouting.The solidifed material,combining closely with the drilling wall,possessed an adequate strength and was not easy to shrink.Compared to the conventional polyurethane,the gas drainage concentration by drilling sealing exceeded 40 percent,and the sealing capacity improves5 times,the sealing effect increases signifcantly.

Ballistic Performance and Damage Characteristics of Chemical Vapor Infiltration Quasi 3D-Cf/SiC Composites

To investigate the ballistic performance and damage characteristics of quasi threedimensional（3D） needle-punched Cf/SiC composites prepared by chemical vapor infiltration（CVI）,penetration experiments were conducted by using 7.62 mm armor piercing incendiary（API）.Macro and micro fracture morphologies were then observed on recycled targets.The results show that the protection coefficient of 3D Cf/SiC composites is 2.54.High porosity and many micro thermal stress cracks may directly lead to the lower ballistic performance.Flat fracture morphology was observed on the crater surface.The low dynamic fracture strength along layer direction may be attributed to the voids and microcracks caused by residual thermal stress.The damage characteristics of Cf/Si C composites include matrix cracking,fiber bundle cracking,interfacial debonding,fiber fracture,and fiber bundle pull-out.And interfacial debonding and fiber fracture may play major roles in energy absorption.

Effect of Natural Zeolite on Performance of Sulfoaluminate Cement-based Planting Cementitious Material

This paper aimed to improve the water-retention performance and basic physical properties of sulfoaluminate cement（SAC）-based planting cementitious material. The effect of natural zeolite on the performance of SAC-based planting material was investigated. The water-retention performance, porosity, compressive strength, and alkalinity had been tested and TG-DSC analysis had been adopted in this paper. Experimental results showed that zeolite was effective to improve the water-retention capacity and 10%, 20% and 30% natural zeolite increased the pore volume of the hardened pastes by 10.6%, 26.0%, and 38.6%, especially pore size below 0.1 μm was increased by 9.7%, 26.2% and 17.5%. And 10% zeolite was beneficial to the compressive strengths of cementitious material and 1, 3, and 28 d compressive strength reached up to 35.9, 55.0, 80.3 MPa. Furthermore zeolite decreased the alkalinity of pore fluid of hardened cementitious material, while the addition of zeolite reached up to 30%, the alkalinity of pore fluid of hardened cementitious material decreased by 8.9%. Therefore zeolite was suitable for improving the performance of SAC-based planting cementitious material.

The road towards sustainable control of schistosomiasis in the Democratic Republic of Congo:Pre-assessment of staff performance and material resources in endemic regions

Objective: To improve knowledge and practice of health staff as well as the availability of material resources for diagnosis and management of schistosomiasis in two endemic provinces of DRC(Kinshasa and Bas-Congo).Methods: Structured interviews were performed using questionnaires with staff from 35 healthcare facilities in 9 health zones(HZ) of Kinshasa and 2 HZ in Bas-Congo.Results: Schistosomiasis was reported to be present in all the included HZ.Health staff knew the most important symptoms of schistosomiasis, but advanced symptoms were more accurately reported in Bas-Congo.Knowledge of symptoms related to schistosomiasis such as anemia(P = 0.0 115) and pollakiuria(P = 0.0 260) was statistically different in both two provinces.Kato-Katz technique and urine filtration were unavailable in both provinces.Parasitological diagnosis was mostly performed using the direct smear method.PZQ was available in 70% of the health facilities, all situated in Bas-Congo.Diagnosis and treatment mostly relied on symptoms and cost more in urban area than in rural.Conclusions: Though knowledge on schistosomiasis among health staff appears sufficient, substantial efforts still must be made to improve the availability of diagnostic tools and treatment in the health facilities in DRC.

Improved High-rate Performance and Cycling Stability of 1D LiFePO_4 Nanorods by a Facile Annealing Process

To alleviate the main limitations of lithium ion diffusion rate and poor electronic conductivity for LiFePO4 cathode material, it is desirable to synthesize nano-size LiFePO4 material due to its enhanced electronic and lithium ion transport rates and thus an improved high-rate performance. However, our previous synthesized LiFePO4 nanorods only exhibited low high-rate and slightly unstable cycle performance. Possible reasons are the poor crystallization and Fe2＋ oxidation of LiFePO4 nanorods prepared by hydrothermal method. In this paper, LiFePO4 nanorods were simply dealt with at 700 ℃ for 4 h under the protection of Ar and H2 mixture gas. The electrochemical properties of LiFePO4/Li cells were investigated by galvanostatic test and cyclic voltammetry（CV）. The experimental results indicated that the annealed LiFePO4 nanorods delivered an excellent cycling stability and obviously improved capacity of 150 mA·h·g-1 at 1C, and even 122 mA·h·g-1 at 5C.

AI-enabled materials discovery for advanced ceramic electrochemical cells

Ceramic electrochemical cells(CECs)are promising devices for clean and efficient energy conversion and storage due to their high energy efficiency,more extended system durability,and less expensive materials.However,the search for suitable materials with desired properties,including high ionic and electronic conductivity,thermal stability,and chemical compatibility,presents ongoing challenges that impede widespread adoption and further advancement in the field.Artificial intelligence(AI)has emerged as a versatile tool capable of enhancing and expediting the materials discovery cycle in CECs through data-driven modeling,simulation,and optimization techniques.Herein,we comprehensively review the state-of-the-art AI applications for materials design and optimization for CECs,covering various material aspects,database construction,data pre-processing,and AI methods.We also present some representative case studies of AI-predicted and synthesized materials for CECs and provide insightful highlights about their approaches.We emphasize the main implications and contributions of the AI approach for advancing the CEC technology,such as reducing the trial-and-error experiments,exploring the vast materials space,discovering novel and optimal materials,and enhancing the understanding of the materials-performance relationships.We also discuss the AI approach’s main limitations and future directions for CECs,such as addressing the data and model challenges,improving and extending the AI models and methods,and integrating with other computational and experimental techniques.We conclude by suggesting some potential applications and collaborations for AI in materials design for CECs.

Development of overlay tester for fracture test of asphalt mixture

To determine the fracture characteristics of asphalt mixture a novel fracture test with modified loading modes loading fixtures and the control system of the conventional overlay tester is implemented by the asphalt material performance tester AMPT .In order to evaluate the validity of the proposed fracture test four different loading rates including 1 2 3 and 4 mm/min are examined in the AMPT. The results indicate that the fracture behavior is similar to creep at a low loading rate and does not show significant marginal tail extension at a high loading rate.It clearly shows the phase of crack initiation crack propagation and fracture at a loading rate of 3 mm/min. Besides eight fracture parameters such as fracture energy tensile strength and tensile modulus are applied to evaluate the fracture characteristics of asphalt mixture.Development of the overlay tester for the fracture test of asphalt mixture can be considered as a new fracture test of asphalt mixture.

舰艇用LZN-2型高性能阻尼材料释放物定性定量分析与评价

舰艇舱室多为密闭环境,舱室内使用的非金属材料释放物是舱室污染的主要来源,因此对所选用的非金属材料必须进行常温释放物的定性定量分析.由于舰艇的特殊性,不仅要求非金属材料在常温条件下释放物的浓度符合舰艇舱室容许浓度,还要求材料在高温条件(火灾或爆炸)下不产生高毒性的物质.……

Effect of anti-biofilm glass–ionomer cement on Streptococcus mutans biofilms

Dental restorative materials with antimicrobial properties can inhibit bacterial colonization, which may result in a reduction of caries at tooth-filling interaction zones. This study aimed to develop antibacterial glass-ionomer cements （GIC） containing a quaternary ammonium monomer （dimethylaminododecyl methacrylate, DMADDM）, and to investigate their effect on material performance and antibacterial properties. Different mass fractions （0, 1.1% and 2.2%） of DMADDM were incorporated into the GIC. The flexure strength, surface charge density, surface roughness and fluoride release were tested. A Streptococcus mutans biofilm model was used. Exopolysaccharides （EPS） staining was used to analyze the inhibitory effect of DMADDM on the biofilm matrix. In addition, biofilm metabolic activity, lactic acid metabolism and the expression of glucosyltransferase genes g/fB, gtfC and gtfD were measured. GIC containing 1.1% and 2.2% DMADDM had flexural strengths matching those of the commercial control （P〉0.1）. DMADDM was able to increase the surface charge density but reduced surface roughness （P〈0.05）. The incorporation of 1.1% and 2.2% DMADDM elevated the release of fluoride by the GIC in the first 2 days （P〈0.05）. The novel DMADDM-modified GIC significantly reduced biofilm metabolic activity （P〈 0.05） and decreased lactic acid production （P〈 0.05）. The quantitative polymerase chain reaction （qPCR） results showed that the expression of gtfB, g/fC and gtfD decreased when mass fractions of DMADDM increased （P〈0.05）. EPS staining showed that both the bacteria and EPS in biofilm decreased in the DMADDM groups. The incorporation of DMADDM could modify the properties of GIC to influence the development of S. mutans biofilms. In this study, we investigated the interface properties of antibacterial materials for the first time. GIC containing DMADDM can improve material performance and antibacterial properties and may contribute to the better management of secondary caries.

New Adhesive Material for Construction Joint of Tunnel Lining

The new adhesive material for the construction joints of tunnel lining(named as SZC) was studied based on the structural characteristics of interfaces and the characteristic of bonding construction, and the performance indexes were verified by tests. The experimental results show that the adhesive capability of interface is improved effectively by using SZC material, the properties, such as anti-freezing, erosion-resistance and anti-shrinkage are improved greatly as well as durability.

Microstructures and Mechanical,Electrical,High-temperature Properties of Cu/Ti_2AlC FGM Fabricated by Hot-pressing

The microstructure and the electrical, thermal, friction, and mechanical properties of Cu/Ti_2AlC fabricated by hot-pressing at 900 ℃ for 1 h were investigated in the present work. Microstructural observations have shown that the plate-like Ti_2AlC grains distribute irregularly in the network of Cu grains, and well-structured, crack-free bonds between the layers. With the increase in the content of Ti_2AlC from layer A to layer D, the electrical resistivity increases from 1.381×10^（-7）Ω·m to 1.918 ×10^（-7）Ω·m, the hardness increases from about 980.27 MPa to about 2196.01 MPa, and the friction coefficient from above 0.20 reduces to about 0.15. Oxidation rate increases with the increases of temperature. Exfoliation was obviously observed on the surface of oxidation layer A. The surface of layer D was still intact and the spalling and other defects were not found. The mass decreases in the acid solution, and increases in the alkaline solution. The largest corrosion rate is found in 6.5% HNO_3 or 4% Na OH solution.

Tool wear performance and surface integrity studies for milling DD5 Ni-based single crystal superalloy

Based on the results of slot milling experiments on the DD5 Ni-based single crystal superalloy(001) crystal plane along the [110]crystal direction, in this paper, efforts were devoted to investigate the tool wear process, wear mechanism and failure modes of the physical vapor deposition(PVD)-AlTiN and TiAlN coated tools under dry milling and water-based minimum quantity lubrication(MQL) conditions. The scanning electron microscope(SEM) morphological observation and energy dispersive X-ray spectroscopy(EDX) elements analysis methods were adopted. Moreover, under the water-based MQL condition, the surface integrity such as surface roughness, dimensional and shape accuracy, microhardness and microstructure alteration were researched. The results demonstrated that the tool edge severe adhesion with the work material, induced by the high Al content in the PVD-AlTiN coating caused the catastrophic tool tip fracture. In contrast, the PVD-TiAlN tool displayed a steady and uniform minor flank wear, even though the material peeling and slight chipping also occurred in the final stage. In addition, due to the high effective cooling and lubricating actions of the water-based MQL method, the PVD-TiAlN coated tool demonstrated intact tip geometry; consequently it could be repaired and reused even if the failure criterion was attained. Moreover, as the accumulative milling length and the tool wear increased, all indicators of the surface integrity forehand were deteriorated.

Light-weighting in aerospace component and system design

Light-weighting involves the use of advanced materials and engineering methods to enable structural elements to deliver the same,or enhanced,technical performance while using less material.The concept has been extensively explored and utilised in many industries from automotive applications to fashion and packaging and offers significant potential in the aviation sector.Typical implementations of light-weighting have involved use of high performance materials such as composites and optimisation of structures using computational aided engineering approaches with production enabled by advanced manufacturing methods such as additive manufacture,foam metals and hot forming.This paper reviews the principal approaches used in light-weighting,along with the scope for application of light-weighting in aviation applications from power-plants to airframe components.A particular area identified as warranting attention and amenable to the use of lightweighting approaches is the design of solar powered aircraft wings.The high aspect ratio typically used for these can be associated with insufficient stiffness,giving rise to non-linear deformation,aileron reversal,flutter and rigid-elastic coupling.Additional applications considered include ultralight aviation components and sub-systems,UAVs,and rockets.Advanced optimisation approaches can be applied to optimise the layout of structural elements,as well as geometrical parameters in order to maximise structural stiffness,minimise mass and enable incorporation of energy storage features.The use of additive manufacturing technologies,some capable of producing composite or multi-material components is an enabler for light-weighting,as features formally associated with one principal function can be designed to fulfil multiple functionalities。

Characterization and Electrochemical Properties of Nanostructured Zr-Doped Anatase TiO_2 Tubes Synthesized by Sol–Gel Template Route

A series of nanostructured Zr-doped anatase TiO_2 tubes with the Zr/Ti molar ratio of 0.01, 0.02, 0.03, and0.09 were prepared by a sol–gel technology on a carbon fiber template. The electrochemical performance of Zr-doped anatase TiO_2 as anodes for rechargeable lithium batteries was investigated and compared with undoped titania. Tests represented that after 35-fold charge/discharge cycling at C/10 the reversible capacity of Zr-doped titania（Zr/Ti = 0.03） reaches 135 m A h g^（-1）, while the capacity of undoped titania（Zr/Ti = 0） yielded only 50 m A h g^（-1）. Based on the results of the physicochemical investigation, three reasons of improving electrochemical performance of Zr-doped titania were suggested. According to the scanning electron microscopy and transmission electron microscopy, Zr^（4＋） doping induces a decrease in nanoparticle size, which facilitates the Li＋diffusion. The Raman investigations show the more open structure of Zr-doped TiO_2 as compared to undoped titania due to changing of the unit cell parameters, that significantly affects on the reversibility of the insertion/extraction process. The electrochemical impedance spectroscopy results indicate that substitution of Zr^（4＋） for Ti^（4＋） into anatase TiO_2 has favorable effects on the conductivity.