Severe matrix effects and high signal uncertainty are two key bottlenecks for the quantitative performance and wide applications of laser-induced breakdown spectroscopy(LIBS).Based on the understanding that the superp...Severe matrix effects and high signal uncertainty are two key bottlenecks for the quantitative performance and wide applications of laser-induced breakdown spectroscopy(LIBS).Based on the understanding that the superposition of both matrix effects and signal uncertainty directly affects plasma parameters and further influences spectral intensity and LIBS quantification performance,a data selection method based on plasma temperature matching(DSPTM)was proposed to reduce both matrix effects and signal uncertainty.By selecting spectra with smaller plasma temperature differences for all samples,the proposed method was able to build up the quantification model to rely more on spectra with smaller matrix effects and signal uncertainty,therefore improving final quantification performance.When applied to quantitative analysis of the zinc content in brass alloys,it was found that both accuracy and precision were improved using either a univariate model or multiple linear regression(MLR).More specifically,for the univariate model,the root-mean-square error of prediction(RMSEP),the determination coefficients(R^(2))and relative standard derivation(RSD)were improved from 3.30%,0.864 and 18.8%to 1.06%,0.986 and 13.5%,respectively;while for MLR,RMSEP,R^(2)and RSD were improved from 3.22%,0.871 and 26.2%to 1.07%,0.986 and 17.4%,respectively.These results prove that DSPTM can be used as an effective method to reduce matrix effects and improve repeatability by selecting reliable data.展开更多
The matrix effects of 14 organophosphorus pesticides in 9 kinds of vegetables matrices were preliminarily studied by gas chromatography/flame photomet- ric detection(FPD) in the paper. The matrix effects of 14 organ...The matrix effects of 14 organophosphorus pesticides in 9 kinds of vegetables matrices were preliminarily studied by gas chromatography/flame photomet- ric detection(FPD) in the paper. The matrix effects of 14 organophosphoms pesticides in 9 kinds of vegetable matrices at 0.05, 0.1 and 0.2 mg/L were compared, respectively. The results showed that matrix enhancement effect and matrix attenuation effect existed in all cases, while matrix effects did not have strong correlation with concentrations of pesticides, but were related to species of vegetables and structure and polarity of pesticides.展开更多
Formulation/pharmaceutical excipients play a major role in formulating drug candidates,with the objectives of ease of administration,targeted delivery and complete availability.Many excipients used in pharmaceutical f...Formulation/pharmaceutical excipients play a major role in formulating drug candidates,with the objectives of ease of administration,targeted delivery and complete availability.Many excipients used in pharmaceutical formulations are orphanized in preclinical drug discovery.These orphan excipients could enhance formulatability of highly lipophilic compounds.Additionally,they are safe in preclinical species when used below the LD50 values.However,when the excipients are used in formulating compounds with diverse physico-chemical properties,they pose challenges by modulating study results through their bioanalytical matrix effects.Excipients invariably present in study samples and not in the calibration curve standards cause over-/under-estimation of exposures.Thus,the mechanism by which excipients cause matrix effects and strategies to nullify these effects needs to be revisited.Furthermore,formulation excipients cause drug interactions by moderating the pathways of drug metabolizing enzymes and drug transport proteins.Although it is not possible to get rid of excipient driven interactions,it is always advised to be aware of these interactions and apply the knowledge to draw meaningful conclusions from study results.In this review,we will comprehensively discuss a)orphan excipients that have wider applications in preclinical formulations,b)bioanalytical matrix effects and possible approaches to mitigating these effects,and c)excipient driven drug interactions and strategies to alleviate the impacts of drug interactions.展开更多
The effect of the solid matrix and porosity of the porous medium are first introduced to the study of power-law nanofluids, and the Marangoni boundary layer flow with heat generation is investigated. Two cases of soli...The effect of the solid matrix and porosity of the porous medium are first introduced to the study of power-law nanofluids, and the Marangoni boundary layer flow with heat generation is investigated. Two cases of solid matrix of porous medium including glass balls and aluminum foam are considered. The governing partial differential equations are simplified by dimensionless variables and similarity transformations, and are solved numerically by using a shooting method with the fourth-fifth-order Runge-Kutta integration technique. It is indicated that the increase of the porosity leads to the enhancement of heat transfer in the surface of the Marangoni boundary layer flow.展开更多
Laser-induced breakdown spectroscopy(LIBS)has been used for soil analysis,but its measurement accuracy is often influenced by matrix effects of different kinds of soils.In this work,a method for matrix effect suppress...Laser-induced breakdown spectroscopy(LIBS)has been used for soil analysis,but its measurement accuracy is often influenced by matrix effects of different kinds of soils.In this work,a method for matrix effect suppressing was developed using laser-induced plasma acoustic signals to correct the original spectrum,thereby improving the analysis accuracy of the soil elements.A good linear relationship was investigated firstly between the original spectral intensity and the acoustic signals.The relative standard deviations(RSDs)of Mg,Ca,Sr,and Ba elements were then calculated for both the original spectrum and the spectrum with the acoustic correction,and the RSDs were significantly reduced with the acoustic correction.Finally,calibration curves of MgⅠ285.213 nm,CaⅠ422.673 nm,SrⅠ460.733 nm and BaⅡ455.403 nm were established to assess the analytical performance of the proposed acoustic correction method.The values of the determination coefficient(R~2)of the calibration curves for Mg,Ca,Sr,and Ba elements,corrected by the acoustic amplitude,are improved from 0.9845,0.9588,0.6165,and 0.6490 to 0.9876,0.9677,0.8768,and 0.8209,respectively.The values of R~2 of the calibration curves corrected by the acoustic energy are further improved to 0.9917,0.9827,0.8835,and 0.8694,respectively.These results suggest that the matrix effect of LIBS on soils can be clearly improved by using acoustic correction,and acoustic energy correction works more efficiently than acoustic amplitude correction.This work provides a simple and efficient method for correcting matrix effects in the element analysis of soils by acoustic signals.展开更多
Steel strips are the main of steel products and flatness is an important quality indicator of steel strips. Flatness control is the key and highly difficult technique of strip mills. The bottle-neck restricting the im...Steel strips are the main of steel products and flatness is an important quality indicator of steel strips. Flatness control is the key and highly difficult technique of strip mills. The bottle-neck restricting the improvement of flatness control techniques is that the research on flatness theories and control mathematic models is not in accordance with the requirement of technique developments. To build a simple, rapid and accurate explicit formulation control model has become an urgent need for the development of flatness control technique. This paper puts forward the conception of dynamic effective matrix based on the effective matrix method for flatness control proposed by the authors under the consideration of the influence of the change of parameters in roiling processes on the effective matrix, and the concept is validated by industrial productions. Three methods of the effective matrix generation are induced: the calculation method based on the flatness prediction model; the calculation method based on the data excavation in rolling processes and the direct calculation method based on the network model. A fuzzy neural network effective matrix model is built based on the clusters, and then the network structure is optimized and the high-speed-calculation problem of the dynamic effective matrix is solved. The flatness control scheme for cold strip mills is proposed based on the dynamic effective matrix. On stand 5 of the 1 220 mm five-stand 4-high cold strip tandem mill, the industrial experiment with the control methods of tilting roll and bending roll is done by the control scheme of the static effective matrix and the dynamic effective matrix, respectively. The experiment result proves that the control effect of the dynamic effective matrix is much better than that of the static effective matrix. This paper proposes a new idea and method for the dynamic flatness control in the rolling processes of cold strip mills and develops the theory and model of the flatness control effective matrix method.展开更多
Objective With the development of analytic technologies, in-situ dating on U-bearing oxide minerals (e.g., cassiterite, rutile and baddeleyite) has been widely used in geological chronological researches and has at...Objective With the development of analytic technologies, in-situ dating on U-bearing oxide minerals (e.g., cassiterite, rutile and baddeleyite) has been widely used in geological chronological researches and has attracted remarkable attention to explore evolution of the earth and obtain age information of various geological processes. Matrix effect related studies are especially important during in-situ U- Pb dating based on Laser Ablation Multiple Collector Inductively Coupled Plasma Mass Spectrometry (LA-MC- ICPMS). However, to our knowledge, only few thorough and systematical matrix effect study of U-bearing oxide minerals has been reported. In this study, we systematically analyzed the matrix effect of U-bearing oxide minerals in order to take place the standards which are difficult to prepare with available standards.展开更多
Matrix effect primarily impacts the accuracy and precision of zircon LA-ICP-MS U-Pb data.This paper describes three types of matrix effect in zircon LA-ICPMS U-Pb dating,i.e.,the element matrix effect,high Ddpa or ura...Matrix effect primarily impacts the accuracy and precision of zircon LA-ICP-MS U-Pb data.This paper describes three types of matrix effect in zircon LA-ICPMS U-Pb dating,i.e.,the element matrix effect,high Ddpa or uranium matrix effect and alpha dose matrix effect,and illustrates the correction of these three effects.In addition,we point out the limitation and possible problems of the existing correction methods.展开更多
Objective To evaluate the long-term therapeutic effect and histologic result of ADM combined with autologous thin split-thickness skin graft.Methods 23 patients were treated with acellalar dermal matrix(ADM) combined ...Objective To evaluate the long-term therapeutic effect and histologic result of ADM combined with autologous thin split-thickness skin graft.Methods 23 patients were treated with acellalar dermal matrix(ADM) combined with autoiogous展开更多
“Breeding by design” for pure lines may be achieved by construction of an additive QTL-allele matrix in a germplasm panel or breeding population, but this option is not available for hybrids, where both additive and...“Breeding by design” for pure lines may be achieved by construction of an additive QTL-allele matrix in a germplasm panel or breeding population, but this option is not available for hybrids, where both additive and dominance QTL-allele matrices must be constructed. In this study, a hybrid-QTL identification approach, designated PLSRGA, using partial least squares regression(PLSR) for model fitting integrated with a genetic algorithm(GA) for variable selection based on a multi-locus, multi-allele model is described for additive and dominance QTL-allele detection in a diallel hybrid population(DHP). The PLSRGA was shown by simulation experiments to be superior to single-marker analysis and was then used for QTL-allele identification in a soybean DPH yield experiment with eight parents. Twenty-eight main-effect QTL with 138 alleles and nine QTL × environment QTL with 46 alleles were identified, with respective contributions of 61.8% and 23.5% of phenotypic variation. Main-effect additive and dominance QTL-allele matrices were established as a compact form of the DHP genetic structure. The mechanism of heterosis superior-to-parents(or superior-to-parents heterosis, SPH) was explored and might be explained by a complementary locus-set composed of OD+(showing positive over-dominance, most often), PD+(showing positive partial-to-complete dominance, less often) and HA+(showing positive homozygous additivity, occasionally) loci, depending on the parental materials. Any locus-type, whether OD+, PD + and HA+, could be the best genotype of a locus. All hybrids showed various numbers of better or best genotypes at many but not necessarily all loci, indicating further SPH improvement. Based on the additive/dominance QTL-allele matrices, the best hybrid genotype was predicted, and a hybrid improvement approach is suggested. PLSRGA is powerful for hybrid QTL-allele detection and cross-SPH improvement.展开更多
Carbon dots(CDs), because of their unique properties, are being rapidly developed as important luminescent materials for imaging, sensing, and use in photonic devices. However, most of the reported fundamental propert...Carbon dots(CDs), because of their unique properties, are being rapidly developed as important luminescent materials for imaging, sensing, and use in photonic devices. However, most of the reported fundamental properties of the CDs are results of investigations conducted in the solution state, which may be completely different from those conducted in the solid state. In this work, we study the luminescence properties, photostability, and the dynamics of CDs in different matrix environments, from ensemble to the single-particle level. We observed that the properties associated with the emission centers and photostability of CDs were extremely sensitive to the local chemical environment. A better understanding of the dependence of the spectroscopic properties of CDs on the complex local chemical environment is an important step toward finding new ways of controlling the optical properties of CDs and optimizing their use in various applications.展开更多
A microwave plasma torch (MPT) simultaneous spectrometer was used to study the spectral character and the matrix effect on alkali metal ions in solution. The main parameters were optimized. The microwave forward pow...A microwave plasma torch (MPT) simultaneous spectrometer was used to study the spectral character and the matrix effect on alkali metal ions in solution. The main parameters were optimized. The microwave forward power was 100 W. The argon flow rate that was used to sustain the Ar-MPT included the flow rate of carrier gas and the flow rate of support gas, which were 0. 8 and 1.0 L/min, respectively. The HC1 concentration in the solution was 0.02 mol/L. The observation height was 9. 0 ram. The detection limits of Li, Na, K, Rb, and Cs were 0. 0003, 0. 0004, 0. 009, 0.07 and 2.4 mg/L, respectively, and the resuhs obtained by the Ar-MPT were compared with those obtained by argon inductively coupled plasma(Ar-ICP) and argon microwave induced plasma(Ar-MIP). The interference effects of several matrix elements were also studied.展开更多
Chromatographic behavior of co-eluted compounds from un-extracted drug-free plasma samples was studied by LC-MS and LC-MS/MS with positive APCI.Under soft gradient,total ion chromatogram(TIC) consisted of two major ...Chromatographic behavior of co-eluted compounds from un-extracted drug-free plasma samples was studied by LC-MS and LC-MS/MS with positive APCI.Under soft gradient,total ion chromatogram(TIC) consisted of two major peaks separated by a constant lower intensity region.Early peak(0.15-0.4 min) belongs to polar plasma compounds and consisted of smaller mass ions(m/z〈 250);late peak(3.6-4.6 min) belongs to thermally unstable phospholipids and consisted of fragments with mlz〈300.Late peak is more sensitive to variations in chromatographic and MS parameters.Screening of most targeted cardiovascular drugs at levels lower than 50 ng/mL has been possible by LC-MS for drugs with retention factors larger than three.Matrix effects and recovery,at 20 and 200 ng/mL,were evaluated for spiked plasma samples with 15 cardiovascular drugs,by MRM-LC-MS/MS.Average recoveries were above 90%and matrix effects expressed as percent matrix factor(%MF) were above 100%,indicating enhancement character for APCI.Large uncertainties were significant for drugs with smaller masses(m/z〈 250) and retention factors lower than two.展开更多
The concentrations of SiO,Al2O,KO,NaO,CaO,MgO,Fe2Oand TiO,and loss on ignition(L.O.I.) are the main inorganic components of geological samples.Concentrations of the eight oxides and L.O.I.are also the main indicators ...The concentrations of SiO,Al2O,KO,NaO,CaO,MgO,Fe2Oand TiO,and loss on ignition(L.O.I.) are the main inorganic components of geological samples.Concentrations of the eight oxides and L.O.I.are also the main indicators of concern in the production of building ceramics.Quantitative analysis of the eight oxides and L.O.I.was performed using fiber-laserbased laser-induced breakdown spectroscopy(LIBS).A combination of continuous background deduction,full width at half maximum(FWHM) intensity integral and spectral sum normalization was proposed for data processing.After the data processing combined the continuous background deduction,FWHM intensity integral and spectral sum normalization,the mean absolute errors(MAEs) of the calibration of L.O.I.,SiO,Al2O,KO,NaO,CaO,MgO,Fe2Oand TiOwas reduced from 2.03%,12.06%,4.84%,1.10%,0.69%,0.31%,0.11%,0.20%and 0.10% to 1.80%,9.48%,2.12%,0.36%,0.58%,0.11%,0.08%,0.19% and 0.05%,respectively.This multivariate method was further introduced and discussed to improve the analysis performance.The MAEs of L.O.I.,SiO,Al2O,KO and NaO were further reduced to1.12%,2.07%,1.38%,0.35% and 0.43%,respectively.The results show that the overall prediction error can meet the requirements for the production of building ceramics.The LIBS desktop analyzer has great potential in detection applications on geological samples.展开更多
A An analytical method using high resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) for rapid simultaneous determination of 24 elements (Be, Mg, A1, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Ge, As, Se, ...A An analytical method using high resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) for rapid simultaneous determination of 24 elements (Be, Mg, A1, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Ge, As, Se, Mo, Ag, Cd, Sn Sb, Ba, Pt, Au, and Pb) in high purity cobalt was described. Sample digestions were performed in closed microwave vessels using HNO3 and HCI. The matrix effects because of the presence of excess HCI and Co were evaluated. The usefulness of high mass resolution for overcoming some spectral interference was demonstrated. The optimum conditions for the determination were tested and discussed. The standard addition method was employed for quantitative analysis. The detection limits were 0.016-1.50 ].tg·g^-1, the recovery ratios were 92.2%-111.2%, and the RSD was less than 3.6%. The method was accurate, quick, and convenient. It was applied to the determination of trace impurities in high purity cobalt with satisfactory results.展开更多
An analytical method using high resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) for rapid simultaneous determination of Be, Mg, Al, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Ge, As, Se, Mo, Ag, Cd, Sn, ...An analytical method using high resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) for rapid simultaneous determination of Be, Mg, Al, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Ge, As, Se, Mo, Ag, Cd, Sn, Sb, Ba, Pt, Au and Pb in high purity cobalt was described. Sample digestions were performed in closed microwave vessels using HNO3 and HCl. The matrix effects due to the presence of excess HCl and Co were evaluated. The usefulness of high mass resolution for overcoming some spectral interference was demonstrated. The optimum conditions for the determination was tested and discussed. Correction for matrix effects, Sc, Rh and Bi were used as internal standards. The detection limits is 0.003-0.57 μg/g, the recovery ratio is 92.2%-111.2%, and the RSD is less than 3.6%. The method is accurate, quick and convenient. It has been applied to the determination of trace impurities in high purity cobalt with satisfactory results.展开更多
A novel inductively coupled plasma mass spectrometry method for direct determination of trace rare earth impurities in high purity europium oxide (Eu_2O_3) was developed. The spectral interference,matrix effect,instru...A novel inductively coupled plasma mass spectrometry method for direct determination of trace rare earth impurities in high purity europium oxide (Eu_2O_3) was developed. The spectral interference,matrix effect,instrument parameters fluctuation were investigated and the optimized experimental conditions were established. Under the selected conditions,the detection limits of the method are 3~7 ng·L (-1),the RSD is varied between 2.1%~8.4%,and the percentage recovery is ranged from 90% to 113% for the analytes. The solid detection limit for gross amount of 13 rare earth impurities is 0.19 μg·g (-1) when the matrix (Eu) concentration of 0.1 mg·ml (-1) was chosen. Compared with the reported methods in the literature,this method has several attractive features: simple,small sample amount required,no internal standard and matrix matching requirements.展开更多
Spatial precession is a special micro-motion of the spinning-directional target, and the micro-Doppler signature of the cone-shaped target with precession is studied. The micro-motion model of precession is built firs...Spatial precession is a special micro-motion of the spinning-directional target, and the micro-Doppler signature of the cone-shaped target with precession is studied. The micro-motion model of precession is built first, and then the micro-Doppler model is developed based on the proposed concept of micro-motion ma- trix, by which the theoretical formula of micro-Doppler signature of precession is derived. In order to further approach to the actual case, the occlusion effect is firstly considered in micro-Doppler, and the simulated result with occlusion effect is well in accordance with the measured result in microwave anechoic chamber, which suggests that the micro-motion model and micro-Doppler model of precession are both valid.展开更多
Sample preparation is considered as the bottleneck step in bioanalysis because each biological matrix has its own unique challenges and complexity.Competent sample preparation to extract the desired analytes and remov...Sample preparation is considered as the bottleneck step in bioanalysis because each biological matrix has its own unique challenges and complexity.Competent sample preparation to extract the desired analytes and remove redundant components is a crucial step in each bioanalytical approach.The matrix effect is a key hurdle in bioanalytical sample preparation,which has gained extensive consideration.Novel sample preparation techniques have advantages over classical techniques in terms of accuracy,automation,ease of sample preparation,storage,and shipment and have become increasingly popular over the past decade.Our objective is to provide a broad outline of current developments in various bioanalytical sample preparation techniques in chromatographic and spectroscopic examinations.In addition,how these techniques have gained considerable attention over the past decade in bioanalytical research is mentioned with preferred examples.Modern trends in bioanalytical sample preparation techniques,including sorbent-based microextraction techniques,are primarily emphasized.展开更多
In this study, extractability of 13 organochlorine pesticides aged in six different soil types, was investigated. Acceptable recoveries were achieved for most of the analytes spiked into five of the soil types. No app...In this study, extractability of 13 organochlorine pesticides aged in six different soil types, was investigated. Acceptable recoveries were achieved for most of the analytes spiked into five of the soil types. No apparent correlation was perceptible between the soil characteristics and extractability of the aged analytes, signifying exhaustiveness of the extraction. However, recovery was considerably minimized (<75%) in the clay ensuring the hypothesis of study stating “extraction efficiency might be matrix dependent”. Therefore, the study demonstrates importance of optimizing extraction conditions even for those believed to be less prone to matrix effect, due to distinct properties of analyte-matrix interactions.展开更多
基金financial support from the Scientific Research Program for Young Talents of China National Nuclear Corporation(2020)National Natural Science Foundation of China(Nos.51906124 and 62205172)+1 种基金Shanxi Province Science and Technology Department(No.20201101013)Guoneng Bengbu Power Generation Co.,Ltd(No.20212000001)。
文摘Severe matrix effects and high signal uncertainty are two key bottlenecks for the quantitative performance and wide applications of laser-induced breakdown spectroscopy(LIBS).Based on the understanding that the superposition of both matrix effects and signal uncertainty directly affects plasma parameters and further influences spectral intensity and LIBS quantification performance,a data selection method based on plasma temperature matching(DSPTM)was proposed to reduce both matrix effects and signal uncertainty.By selecting spectra with smaller plasma temperature differences for all samples,the proposed method was able to build up the quantification model to rely more on spectra with smaller matrix effects and signal uncertainty,therefore improving final quantification performance.When applied to quantitative analysis of the zinc content in brass alloys,it was found that both accuracy and precision were improved using either a univariate model or multiple linear regression(MLR).More specifically,for the univariate model,the root-mean-square error of prediction(RMSEP),the determination coefficients(R^(2))and relative standard derivation(RSD)were improved from 3.30%,0.864 and 18.8%to 1.06%,0.986 and 13.5%,respectively;while for MLR,RMSEP,R^(2)and RSD were improved from 3.22%,0.871 and 26.2%to 1.07%,0.986 and 17.4%,respectively.These results prove that DSPTM can be used as an effective method to reduce matrix effects and improve repeatability by selecting reliable data.
文摘The matrix effects of 14 organophosphorus pesticides in 9 kinds of vegetables matrices were preliminarily studied by gas chromatography/flame photomet- ric detection(FPD) in the paper. The matrix effects of 14 organophosphoms pesticides in 9 kinds of vegetable matrices at 0.05, 0.1 and 0.2 mg/L were compared, respectively. The results showed that matrix enhancement effect and matrix attenuation effect existed in all cases, while matrix effects did not have strong correlation with concentrations of pesticides, but were related to species of vegetables and structure and polarity of pesticides.
文摘Formulation/pharmaceutical excipients play a major role in formulating drug candidates,with the objectives of ease of administration,targeted delivery and complete availability.Many excipients used in pharmaceutical formulations are orphanized in preclinical drug discovery.These orphan excipients could enhance formulatability of highly lipophilic compounds.Additionally,they are safe in preclinical species when used below the LD50 values.However,when the excipients are used in formulating compounds with diverse physico-chemical properties,they pose challenges by modulating study results through their bioanalytical matrix effects.Excipients invariably present in study samples and not in the calibration curve standards cause over-/under-estimation of exposures.Thus,the mechanism by which excipients cause matrix effects and strategies to nullify these effects needs to be revisited.Furthermore,formulation excipients cause drug interactions by moderating the pathways of drug metabolizing enzymes and drug transport proteins.Although it is not possible to get rid of excipient driven interactions,it is always advised to be aware of these interactions and apply the knowledge to draw meaningful conclusions from study results.In this review,we will comprehensively discuss a)orphan excipients that have wider applications in preclinical formulations,b)bioanalytical matrix effects and possible approaches to mitigating these effects,and c)excipient driven drug interactions and strategies to alleviate the impacts of drug interactions.
基金Supported by the National Natural Science Foundation of China under Grant No 51305080
文摘The effect of the solid matrix and porosity of the porous medium are first introduced to the study of power-law nanofluids, and the Marangoni boundary layer flow with heat generation is investigated. Two cases of solid matrix of porous medium including glass balls and aluminum foam are considered. The governing partial differential equations are simplified by dimensionless variables and similarity transformations, and are solved numerically by using a shooting method with the fourth-fifth-order Runge-Kutta integration technique. It is indicated that the increase of the porosity leads to the enhancement of heat transfer in the surface of the Marangoni boundary layer flow.
基金financially supported by National Natural Science Foundation of China(No.12064029)by Jiangxi Provincial Natural Science Foundation(No.20202BABL202024)by the Open project program of Key Laboratory of Opto-Electronic Information Science and Technology of Jiangxi Province(No.ED202208094)。
文摘Laser-induced breakdown spectroscopy(LIBS)has been used for soil analysis,but its measurement accuracy is often influenced by matrix effects of different kinds of soils.In this work,a method for matrix effect suppressing was developed using laser-induced plasma acoustic signals to correct the original spectrum,thereby improving the analysis accuracy of the soil elements.A good linear relationship was investigated firstly between the original spectral intensity and the acoustic signals.The relative standard deviations(RSDs)of Mg,Ca,Sr,and Ba elements were then calculated for both the original spectrum and the spectrum with the acoustic correction,and the RSDs were significantly reduced with the acoustic correction.Finally,calibration curves of MgⅠ285.213 nm,CaⅠ422.673 nm,SrⅠ460.733 nm and BaⅡ455.403 nm were established to assess the analytical performance of the proposed acoustic correction method.The values of the determination coefficient(R~2)of the calibration curves for Mg,Ca,Sr,and Ba elements,corrected by the acoustic amplitude,are improved from 0.9845,0.9588,0.6165,and 0.6490 to 0.9876,0.9677,0.8768,and 0.8209,respectively.The values of R~2 of the calibration curves corrected by the acoustic energy are further improved to 0.9917,0.9827,0.8835,and 0.8694,respectively.These results suggest that the matrix effect of LIBS on soils can be clearly improved by using acoustic correction,and acoustic energy correction works more efficiently than acoustic amplitude correction.This work provides a simple and efficient method for correcting matrix effects in the element analysis of soils by acoustic signals.
基金supported by National Natural Science Foundation of China(Grant No. 50675186)Hebei Provincial Major Natural Science Foundation of China (Grant No. E2006001038)
文摘Steel strips are the main of steel products and flatness is an important quality indicator of steel strips. Flatness control is the key and highly difficult technique of strip mills. The bottle-neck restricting the improvement of flatness control techniques is that the research on flatness theories and control mathematic models is not in accordance with the requirement of technique developments. To build a simple, rapid and accurate explicit formulation control model has become an urgent need for the development of flatness control technique. This paper puts forward the conception of dynamic effective matrix based on the effective matrix method for flatness control proposed by the authors under the consideration of the influence of the change of parameters in roiling processes on the effective matrix, and the concept is validated by industrial productions. Three methods of the effective matrix generation are induced: the calculation method based on the flatness prediction model; the calculation method based on the data excavation in rolling processes and the direct calculation method based on the network model. A fuzzy neural network effective matrix model is built based on the clusters, and then the network structure is optimized and the high-speed-calculation problem of the dynamic effective matrix is solved. The flatness control scheme for cold strip mills is proposed based on the dynamic effective matrix. On stand 5 of the 1 220 mm five-stand 4-high cold strip tandem mill, the industrial experiment with the control methods of tilting roll and bending roll is done by the control scheme of the static effective matrix and the dynamic effective matrix, respectively. The experiment result proves that the control effect of the dynamic effective matrix is much better than that of the static effective matrix. This paper proposes a new idea and method for the dynamic flatness control in the rolling processes of cold strip mills and develops the theory and model of the flatness control effective matrix method.
基金financially supported by the National Natural Science Foundation of China(grants No.41503052 and 41373053)the National Science and Technology Infrastructure(grant No.DDK14-39)
文摘Objective With the development of analytic technologies, in-situ dating on U-bearing oxide minerals (e.g., cassiterite, rutile and baddeleyite) has been widely used in geological chronological researches and has attracted remarkable attention to explore evolution of the earth and obtain age information of various geological processes. Matrix effect related studies are especially important during in-situ U- Pb dating based on Laser Ablation Multiple Collector Inductively Coupled Plasma Mass Spectrometry (LA-MC- ICPMS). However, to our knowledge, only few thorough and systematical matrix effect study of U-bearing oxide minerals has been reported. In this study, we systematically analyzed the matrix effect of U-bearing oxide minerals in order to take place the standards which are difficult to prepare with available standards.
文摘Matrix effect primarily impacts the accuracy and precision of zircon LA-ICP-MS U-Pb data.This paper describes three types of matrix effect in zircon LA-ICPMS U-Pb dating,i.e.,the element matrix effect,high Ddpa or uranium matrix effect and alpha dose matrix effect,and illustrates the correction of these three effects.In addition,we point out the limitation and possible problems of the existing correction methods.
文摘Objective To evaluate the long-term therapeutic effect and histologic result of ADM combined with autologous thin split-thickness skin graft.Methods 23 patients were treated with acellalar dermal matrix(ADM) combined with autoiogous
基金supported by the National Key Research and Development Program of China (2021YFF1001204,2017YFD0101500)the MOE Program of Introducing Talents of Discipline to Universities (“111”Project, B08025)+4 种基金the MOE Program for Changjiang Scholars and Innovative Research Team in University (PCSIRT_17R55)the MARA CARS-04 Programthe Jiangsu Higher Education PAPD Programthe Fundamental Research Funds for the Central Universities (KYZZ201901)the Jiangsu JCICMCP Program。
文摘“Breeding by design” for pure lines may be achieved by construction of an additive QTL-allele matrix in a germplasm panel or breeding population, but this option is not available for hybrids, where both additive and dominance QTL-allele matrices must be constructed. In this study, a hybrid-QTL identification approach, designated PLSRGA, using partial least squares regression(PLSR) for model fitting integrated with a genetic algorithm(GA) for variable selection based on a multi-locus, multi-allele model is described for additive and dominance QTL-allele detection in a diallel hybrid population(DHP). The PLSRGA was shown by simulation experiments to be superior to single-marker analysis and was then used for QTL-allele identification in a soybean DPH yield experiment with eight parents. Twenty-eight main-effect QTL with 138 alleles and nine QTL × environment QTL with 46 alleles were identified, with respective contributions of 61.8% and 23.5% of phenotypic variation. Main-effect additive and dominance QTL-allele matrices were established as a compact form of the DHP genetic structure. The mechanism of heterosis superior-to-parents(or superior-to-parents heterosis, SPH) was explored and might be explained by a complementary locus-set composed of OD+(showing positive over-dominance, most often), PD+(showing positive partial-to-complete dominance, less often) and HA+(showing positive homozygous additivity, occasionally) loci, depending on the parental materials. Any locus-type, whether OD+, PD + and HA+, could be the best genotype of a locus. All hybrids showed various numbers of better or best genotypes at many but not necessarily all loci, indicating further SPH improvement. Based on the additive/dominance QTL-allele matrices, the best hybrid genotype was predicted, and a hybrid improvement approach is suggested. PLSRGA is powerful for hybrid QTL-allele detection and cross-SPH improvement.
基金financial support from National Natural Science Foundation of China (No.22073046)Fundamental Research Funds for the Central Universities。
文摘Carbon dots(CDs), because of their unique properties, are being rapidly developed as important luminescent materials for imaging, sensing, and use in photonic devices. However, most of the reported fundamental properties of the CDs are results of investigations conducted in the solution state, which may be completely different from those conducted in the solid state. In this work, we study the luminescence properties, photostability, and the dynamics of CDs in different matrix environments, from ensemble to the single-particle level. We observed that the properties associated with the emission centers and photostability of CDs were extremely sensitive to the local chemical environment. A better understanding of the dependence of the spectroscopic properties of CDs on the complex local chemical environment is an important step toward finding new ways of controlling the optical properties of CDs and optimizing their use in various applications.
文摘A microwave plasma torch (MPT) simultaneous spectrometer was used to study the spectral character and the matrix effect on alkali metal ions in solution. The main parameters were optimized. The microwave forward power was 100 W. The argon flow rate that was used to sustain the Ar-MPT included the flow rate of carrier gas and the flow rate of support gas, which were 0. 8 and 1.0 L/min, respectively. The HC1 concentration in the solution was 0.02 mol/L. The observation height was 9. 0 ram. The detection limits of Li, Na, K, Rb, and Cs were 0. 0003, 0. 0004, 0. 009, 0.07 and 2.4 mg/L, respectively, and the resuhs obtained by the Ar-MPT were compared with those obtained by argon inductively coupled plasma(Ar-ICP) and argon microwave induced plasma(Ar-MIP). The interference effects of several matrix elements were also studied.
基金supported by Dean of Scientific Research at Jordan University of Science and Technology(JUST)(No.159/ 2012)
文摘Chromatographic behavior of co-eluted compounds from un-extracted drug-free plasma samples was studied by LC-MS and LC-MS/MS with positive APCI.Under soft gradient,total ion chromatogram(TIC) consisted of two major peaks separated by a constant lower intensity region.Early peak(0.15-0.4 min) belongs to polar plasma compounds and consisted of smaller mass ions(m/z〈 250);late peak(3.6-4.6 min) belongs to thermally unstable phospholipids and consisted of fragments with mlz〈300.Late peak is more sensitive to variations in chromatographic and MS parameters.Screening of most targeted cardiovascular drugs at levels lower than 50 ng/mL has been possible by LC-MS for drugs with retention factors larger than three.Matrix effects and recovery,at 20 and 200 ng/mL,were evaluated for spiked plasma samples with 15 cardiovascular drugs,by MRM-LC-MS/MS.Average recoveries were above 90%and matrix effects expressed as percent matrix factor(%MF) were above 100%,indicating enhancement character for APCI.Large uncertainties were significant for drugs with smaller masses(m/z〈 250) and retention factors lower than two.
基金supported by National Natural Science Foundation of China(No.62173321)the Key Research Program of Frontier Sciences,CAS(No.QYZDJ-SSW-JSC037)+2 种基金the Science and Technology Service Network Initiative Program,CAS(No.KFJ-STS-QYZD-2021-19-002)the Liaoning Provincial Natural Science Foundation(No.2021-BS-022)the Youth Innovation Promotion Association,CAS。
文摘The concentrations of SiO,Al2O,KO,NaO,CaO,MgO,Fe2Oand TiO,and loss on ignition(L.O.I.) are the main inorganic components of geological samples.Concentrations of the eight oxides and L.O.I.are also the main indicators of concern in the production of building ceramics.Quantitative analysis of the eight oxides and L.O.I.was performed using fiber-laserbased laser-induced breakdown spectroscopy(LIBS).A combination of continuous background deduction,full width at half maximum(FWHM) intensity integral and spectral sum normalization was proposed for data processing.After the data processing combined the continuous background deduction,FWHM intensity integral and spectral sum normalization,the mean absolute errors(MAEs) of the calibration of L.O.I.,SiO,Al2O,KO,NaO,CaO,MgO,Fe2Oand TiOwas reduced from 2.03%,12.06%,4.84%,1.10%,0.69%,0.31%,0.11%,0.20%and 0.10% to 1.80%,9.48%,2.12%,0.36%,0.58%,0.11%,0.08%,0.19% and 0.05%,respectively.This multivariate method was further introduced and discussed to improve the analysis performance.The MAEs of L.O.I.,SiO,Al2O,KO and NaO were further reduced to1.12%,2.07%,1.38%,0.35% and 0.43%,respectively.The results show that the overall prediction error can meet the requirements for the production of building ceramics.The LIBS desktop analyzer has great potential in detection applications on geological samples.
基金the Natural Science Foundation of Hunan Province, China (No. 05JJ40017).
文摘A An analytical method using high resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) for rapid simultaneous determination of 24 elements (Be, Mg, A1, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Ge, As, Se, Mo, Ag, Cd, Sn Sb, Ba, Pt, Au, and Pb) in high purity cobalt was described. Sample digestions were performed in closed microwave vessels using HNO3 and HCI. The matrix effects because of the presence of excess HCI and Co were evaluated. The usefulness of high mass resolution for overcoming some spectral interference was demonstrated. The optimum conditions for the determination were tested and discussed. The standard addition method was employed for quantitative analysis. The detection limits were 0.016-1.50 ].tg·g^-1, the recovery ratios were 92.2%-111.2%, and the RSD was less than 3.6%. The method was accurate, quick, and convenient. It was applied to the determination of trace impurities in high purity cobalt with satisfactory results.
基金supported by the Natural Science Foundation of Hunan Province(No.05JJ40017)Education Department of Hunan Province(No.05B064).
文摘An analytical method using high resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) for rapid simultaneous determination of Be, Mg, Al, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Ga, Ge, As, Se, Mo, Ag, Cd, Sn, Sb, Ba, Pt, Au and Pb in high purity cobalt was described. Sample digestions were performed in closed microwave vessels using HNO3 and HCl. The matrix effects due to the presence of excess HCl and Co were evaluated. The usefulness of high mass resolution for overcoming some spectral interference was demonstrated. The optimum conditions for the determination was tested and discussed. Correction for matrix effects, Sc, Rh and Bi were used as internal standards. The detection limits is 0.003-0.57 μg/g, the recovery ratio is 92.2%-111.2%, and the RSD is less than 3.6%. The method is accurate, quick and convenient. It has been applied to the determination of trace impurities in high purity cobalt with satisfactory results.
文摘A novel inductively coupled plasma mass spectrometry method for direct determination of trace rare earth impurities in high purity europium oxide (Eu_2O_3) was developed. The spectral interference,matrix effect,instrument parameters fluctuation were investigated and the optimized experimental conditions were established. Under the selected conditions,the detection limits of the method are 3~7 ng·L (-1),the RSD is varied between 2.1%~8.4%,and the percentage recovery is ranged from 90% to 113% for the analytes. The solid detection limit for gross amount of 13 rare earth impurities is 0.19 μg·g (-1) when the matrix (Eu) concentration of 0.1 mg·ml (-1) was chosen. Compared with the reported methods in the literature,this method has several attractive features: simple,small sample amount required,no internal standard and matrix matching requirements.
文摘Spatial precession is a special micro-motion of the spinning-directional target, and the micro-Doppler signature of the cone-shaped target with precession is studied. The micro-motion model of precession is built first, and then the micro-Doppler model is developed based on the proposed concept of micro-motion ma- trix, by which the theoretical formula of micro-Doppler signature of precession is derived. In order to further approach to the actual case, the occlusion effect is firstly considered in micro-Doppler, and the simulated result with occlusion effect is well in accordance with the measured result in microwave anechoic chamber, which suggests that the micro-motion model and micro-Doppler model of precession are both valid.
基金the National Natural Science Foundation of China(Grant No.:81741144)Ministry of Science and Technology of the People's Republic of China(Grant No.:2018ZX09J18107-002)for their financial assistance.
文摘Sample preparation is considered as the bottleneck step in bioanalysis because each biological matrix has its own unique challenges and complexity.Competent sample preparation to extract the desired analytes and remove redundant components is a crucial step in each bioanalytical approach.The matrix effect is a key hurdle in bioanalytical sample preparation,which has gained extensive consideration.Novel sample preparation techniques have advantages over classical techniques in terms of accuracy,automation,ease of sample preparation,storage,and shipment and have become increasingly popular over the past decade.Our objective is to provide a broad outline of current developments in various bioanalytical sample preparation techniques in chromatographic and spectroscopic examinations.In addition,how these techniques have gained considerable attention over the past decade in bioanalytical research is mentioned with preferred examples.Modern trends in bioanalytical sample preparation techniques,including sorbent-based microextraction techniques,are primarily emphasized.
基金financial support provided by the Swedish International Development Agencythe Department for Research Co-operation(SIDA/SAREC)and the International Science Program(ISP).
文摘In this study, extractability of 13 organochlorine pesticides aged in six different soil types, was investigated. Acceptable recoveries were achieved for most of the analytes spiked into five of the soil types. No apparent correlation was perceptible between the soil characteristics and extractability of the aged analytes, signifying exhaustiveness of the extraction. However, recovery was considerably minimized (<75%) in the clay ensuring the hypothesis of study stating “extraction efficiency might be matrix dependent”. Therefore, the study demonstrates importance of optimizing extraction conditions even for those believed to be less prone to matrix effect, due to distinct properties of analyte-matrix interactions.