Aiming at the assembly accuracy of a large aircraft transport jig, the effect of component error and the error of work-piece surface on the work-piece position and orientation in the 3-2-1 fixturing scheme is studied ...Aiming at the assembly accuracy of a large aircraft transport jig, the effect of component error and the error of work-piece surface on the work-piece position and orientation in the 3-2-1 fixturing scheme is studied with the object pose space description method. The error mapping model between the connecting part of the front frame rack and its support base is modeled using the homogeneous transformation matrix(HTM) method. The probabilistic error is simulated using the Monte Carlo method. The measurement experiment was conducted by the laser tracker to verify the effectiveness of the approach, and the approach has been successfully applied to the production of transport jig.展开更多
Corrosion re sistance of Zircaloy-4 alloy tube in superheated steam at 673 K/10.3 MPa is anisotropic.A part of the surface undergoes uniform corrosion while the other suffers nodular corrosion.Narrow and wide nodules ...Corrosion re sistance of Zircaloy-4 alloy tube in superheated steam at 673 K/10.3 MPa is anisotropic.A part of the surface undergoes uniform corrosion while the other suffers nodular corrosion.Narrow and wide nodules are observed after an exposure period of 3 and 30 days,respectively.A new matrix transformation method is established in order to study the formation mechanism of nodules in the cross-section(CS) of Zircaloy-4 alloy tube using the EBSD technique,while the CS perpendicular to axial direction(AD).The results reveal that the microtexture is a key factor behind the two types of corrosion.Furthermore,the oxide layers grow anisotropically over the corroded surface.A thick oxide layer forms over the nodular corrosion region on the grains with c-axis oriented in the range of 40° around tangential direction(TD),whereas a thin oxide layer over the uniform corrosion region is detected on the grains with c-axis oriented in the range of 68° around TD.In short,the anisotropic growth of oxide layer was caused by the change of microtexture of the Zr-4 alloy tube,and this anisotropic growth of oxide layer contributed to the nodules formation.展开更多
基金Supported by National Key Technology Research and Development Program of China(No.2012BAF01B07)
文摘Aiming at the assembly accuracy of a large aircraft transport jig, the effect of component error and the error of work-piece surface on the work-piece position and orientation in the 3-2-1 fixturing scheme is studied with the object pose space description method. The error mapping model between the connecting part of the front frame rack and its support base is modeled using the homogeneous transformation matrix(HTM) method. The probabilistic error is simulated using the Monte Carlo method. The measurement experiment was conducted by the laser tracker to verify the effectiveness of the approach, and the approach has been successfully applied to the production of transport jig.
文摘Corrosion re sistance of Zircaloy-4 alloy tube in superheated steam at 673 K/10.3 MPa is anisotropic.A part of the surface undergoes uniform corrosion while the other suffers nodular corrosion.Narrow and wide nodules are observed after an exposure period of 3 and 30 days,respectively.A new matrix transformation method is established in order to study the formation mechanism of nodules in the cross-section(CS) of Zircaloy-4 alloy tube using the EBSD technique,while the CS perpendicular to axial direction(AD).The results reveal that the microtexture is a key factor behind the two types of corrosion.Furthermore,the oxide layers grow anisotropically over the corroded surface.A thick oxide layer forms over the nodular corrosion region on the grains with c-axis oriented in the range of 40° around tangential direction(TD),whereas a thin oxide layer over the uniform corrosion region is detected on the grains with c-axis oriented in the range of 68° around TD.In short,the anisotropic growth of oxide layer was caused by the change of microtexture of the Zr-4 alloy tube,and this anisotropic growth of oxide layer contributed to the nodules formation.
