STUDY ON TESTING TECHNIQUE FOR MEASUREMENT OF FATIGUE－CREEP INTERACTION RESISTANCE

By using dropped stress creep method a new testing technique for measurement of the fa-tigue-creep interaction resistance is developed. At varied adjusted mean stresses the creep testingwas performed repeatedly When an unlimited extensive incubation period with zero creep rate oc-curred. the stress cavsing zero creep rate is defined as fatigue-creep resistance. The developped test-ing technique was used to measure the fatigue-creep resistance in F anc C regions. The dynamic ef-fective stress could yield a better descrption of fatigue and creep interaction. The fatigue-creep rateequations with varied exponents inF of C region are established. The different deformation mecha-nisms in F or C regions are indicated

A Cross-cultural Examination of the Noise-sensitivity Scale-short Form:Measurement Invariance Testing between the US and Chinese Samples

Unwanted sound that is unpleasant or disruptive to hear, often interpreted as noise, is a widespread environmental pollutant. Similar to other environmental pollutants, this noise incurs a variety of costs to society. Numerous negative health impacts are linked to increases in noise exposure,such as increased cardiovascular risk;and sleep

MLSI-RT: memorize LOS range measurements identified residual test location algorithm and performance analysis

The dominant error source of mobile terminal location in wireless sensor networks （WSNs） is the non-line-of-sight （NLOS） propagation error. Among the algorithms proposed to mitigate the influence of NLOS propagation error, residual test （RT） is an efficient one, however with high computational complexity （CC）. An improved algorithm that memorizes the light of sight （LOS） range measurements （RMs） identified memorize LOS range measurements identified residual test （MLSI-RT） is presented in this paper to address this problem. The MLSI-RT is based on the assumption that when all RMs are from LOS propagations, the normalized residual follows the central Chi-Square distribution while for NLOS cases it is non-central. This study can reduce the CC by more than 90%.

Block-based test data adequacy measurement criteria and test complexity metrics

On the basis of software testing tools we developed for programming languages, we firstly present a new control flowgraph model based on block. In view of the notion of block, we extend the traditional program\|based software test data adequacy measurement criteria, and empirically analyze the subsume relation between these measurement criteria. Then, we define four test complexity metrics based on block. They are J\|complexity 0; J\|complexity 1; J\|complexity \{1+\}; J\|complexity 2. Finally, we show the Kiviat diagram that makes software quality visible.

SMART STRUCTURES USING PIEZOELEMENTS FOR ACTIVE VIBRATION AND NOISE SUPPRESSION IN AVIATION AND AEROSPACE

Smart material and structure (SMS) is a challenging novel technique for the 21 century especially in fields of aviation and aerospace. Vibration and noise suppression smart structure is an important branch of SMS. There are several typical structures such as the cabin of an airplane, space station, the solar board of satellite and the rotor blade of a helicopter, of which the vibrations and radiation noises have bad influences on precise equipments and aiming systems. In order to suppress vibrations and noises of these structures, several algorithms are applied to the models which simulate the structures. Experiments are performed to suppress vibrations and noises by bonding sensors and actuators to the structures at the optimized locations and using computer based measurement and control systems. For the blade vibration control of a helicopter, a non contact method of signal transmission by magneto electric coupling is discussed. The experimental results demonstrate that the methods used for active control are effective.

Experimental Investigation on Basic Prototype of Solid Propellant Impulsive Microthrusters

A new type of impulsive microthruster and its measurement system were designed for the aim of testing the performance of a basic prototype of solid propellant impulsive microthruster. Two sets of tests were conducted. The tests show that the ignitor and the main charge of the microthruster match well, the dynamic and static capability of the test and measurement meets the test requirement and the result is creditable. The measured technical characteristics of the microthruster are that the ignition delay time is shorter than 0 3?ms, the total impulse is over 3?N·s, the operational time is shorter than 16?ms and the mass ratio of the thruster is 0 216.

Design and theoretical analysis of test system for propellants' gas pressure in warhead

Aiming at harsh environment of cluster bombs center tube explosion dispersion and difficulties in installation of traditional test systems,a storage test system based on 16-bit ultra-low power microcontroller MSP430 is designed in order to acquire gas pressure during cluster bombs dispersion.To meet the requirement of low power consumption,the working states of system＇s modules during data acquisition are elaborated and the equation to calculate the gas pressure change during cylindrical center tube opening the hatch is deduced.The field test is conducted and good test results are obtained.

An NT-MT Combined Method for Gross Error Detection and Data Reconciliation

An NT-MT combined method based on nodal test (NT) and measurement test (MT) is developed for gross error detection and data reconciliation for industrial application. The NT-MT combined method makes use of both NT and MT tests and this combination helps to overcome the defects in the respective methods. It also avoids any artificial manipulation and eliminates the huge combinatorial problem that is created in the combined method based on the nodal test in the case of more than one gross error for a large process system. Serial compensation strategy is also used to avoid the decrease of the coefficient matrix rank during the computation of the proposed method. Simulation results show that the proposed method is very effective and possesses good performance.

Study and application of monitoring plane displacement of a similarity model based on time-series images

In order to compensate for the deficiency of present methods of monitoring plane displacement in similarity model tests,such as inadequate real-time monitoring and more manual intervention,an effective monitoring method was proposed in this study,and the major steps of the monitoring method include:firstly,time-series images of the similarity model in the test were obtained by a camera,and secondly,measuring points marked as artificial targets were automatically tracked and recognized from time-series images.Finally,the real-time plane displacement field was calculated by the fixed magnification between objects and images under the specific conditions.And then the application device of the method was designed and tested.At the same time,a sub-pixel location method and a distortion error model were used to improve the measuring accuracy.The results indicate that this method may record the entire test,especially the detailed non-uniform deformation and sudden deformation.Compared with traditional methods this method has a number of advantages,such as greater measurement accuracy and reliability,less manual intervention,higher automation,strong practical properties,much more measurement information and so on.

Constant-Stress Accelerated Degradation Life Test of an Organic Light-Emitting Diode Display under Violet Light

The lifetime of commercial OLED display devices increases, so does the need for an accelerated lifetime testing method. The present work proposes a simple and accurate blackbox testing approach for commercial PMOLED display lifetime assessment using violet light-induced accelerated aging. Maximum likelihood estimations using lognormal distributions are performed based on datasets acquired from samples exposed to six different degrees of violet irradiance and accelerated life model is shown to accurately fit experimental data using an inverse power law. Based on these results, weighted average of the logarithmic standard deviation, the average life and median life can then be obtained for specific conditions of operation of the devices. As this method relies exclusively on violet light-induced degradation at room-temperature, this minimally-invasive testing procedure requires no significant modification to the display hardware architecture.

Scanning Hartmann test method and its application to lens aberration measurement

A scanning Hartmann test method is proposed and its measurement principle is described. The scanning Hartmann test setup is formed by modifying the Hartmann screen of the conventional Hartmann test setup. With the rotation of the scanning Hartmann screen and the improved hole arrangement, the whole information of the lens to be tested in the full aperture can be obtained. The measurement accuracy of the aberration is improved and the local error of the lens can be got. In the method, no change of the Hartmann screen is needed for measuring the lenses of different aperture sizes. Experimental results of aberration measurements of two lenses are given to verify the usefulness of the setup.