Mass and heat transfer mechanism in wood during radio frequency/vacuum drying and numerical analysis

The mass and heat transfer mechanisms during radio frequency/vacuum （RF/V） drying of square-edged timber were analyzed and discussed in detail, and a new one-dimensional mathematical model to describe the transport phenomena of mass and heat during continuous RF/V drying was derived from conservation equations based on the mass and heat transfer theory of porous materials The new model provided a relatively fast and efficient way to simulate vacuum drying behavior assisted by dielectric heating. Its advantages compared with the conventional models include： （1） Each independent vari- able has a separate control equation and is solved inde- pendently by converting the partial differential equation into a difference equation with the finite volume method; （2） The calculated data from different parts of the specimen can be displayed in the evolution curves, and the change law of the,parameters can be better described. After analyzing the calculated results, most of the important phenomena observed during RF/V drying were adequately described by this model.

Insights into the dwarfing mechanism of pear(Pyrus betulaefolia) based on anatomical and structural analysis using X-ray scanning

The lack of a suitable rootstock to control scion growth has limited the development of high-density plantations in pear production, which is partly attributed to poor understanding of the dwarfing mechanism. In the present study, the rootstock of the dwarf-type pear (Pyrus betulaefolia)PY-9’ was identified and used as the material for anatomical analysis.PY-9’ grew to half the tree height of the normal cultivar Zhengdu’, along with fewer internodes and shorter length. Significant differences in growth rate betweenPY-9’ andZhengdu’ were detected at approximately 30 days after full bloom, which corresponded with the time of the greatest difference in water potential between the dwarf and normal cultivar.PY-9’ showed a higher photosynthetic rate thanZhengdu’. Anatomical analysis showed thatPY-9’ had higher area ratios of both phloem and xylem and more developed vascular tissues thanZhengdu’. The three-dimensional reconstructed skeleton of the xylem from X-ray computed tomography scanning revealed greater intervessel connectivity inZhengdu’ than inPY-9’, which could contribute to the more vigorous growth ofZhengdu’. This study thus provides the first comparison of the microstructural properties of xylem elements between a dwarfing-type and vigorous-type pear rootstock, providing new insights into the dwarfing mechanism in pear and facilitating breeding of dwarf pear rootstocks to increase crop productivity.

Configuration Synthesis and Grasping Performance Analysis of Multi-Loop Coupling Capture Mechanism for Launch and Recovery of Torpedo-Shaped Autonomous Underwater Vehicle

Research of capture mechanisms with strong capture adaptability and stable grasp is important to solve the problem of launch and recovery of torpedo-shaped autonomous underwater vehicles(AUVs).A multi-loop coupling capture mechanism with strong adaptability and high retraction rate has been proposed for the launch and recovery of torpedo-shaped AUVs with different morphological features.Firstly,the principle of capturing motion retraction is described based on the appearance characteristics of torpedo-shaped AUVs,and the configuration synthesis of the capture mechanism is carried out using the method of constrained chain synthesis.Secondly,the screw theory is employed to analyze the degree of freedom(DoF)of the capture mechanism.Then,the 3D model of the capture mechanism is established,and the kinematics and dynamics simulations are carried out.Combined with the capture orientation requirements of the capture mechanism,the statics and vibration characteristics analyses are carried out.Furthermore,considering the capture process and the underwater working environment,the motion characteristics and hydraulics characteristics of the capture mechanism are analyzed.Finally,a principle prototype is developed and the torpedo-shaped AUVs capture experiment is completed.The work provides technical reserves for the research and development of AUV capture special equipment.

Multimodal Sentiment Analysis Based on a Cross-Modal Multihead Attention Mechanism

Multimodal sentiment analysis aims to understand people’s emotions and opinions from diverse data.Concate-nating or multiplying various modalities is a traditional multi-modal sentiment analysis fusion method.This fusion method does not utilize the correlation information between modalities.To solve this problem,this paper proposes amodel based on amulti-head attention mechanism.First,after preprocessing the original data.Then,the feature representation is converted into a sequence of word vectors and positional encoding is introduced to better understand the semantic and sequential information in the input sequence.Next,the input coding sequence is fed into the transformer model for further processing and learning.At the transformer layer,a cross-modal attention consisting of a pair of multi-head attention modules is employed to reflect the correlation between modalities.Finally,the processed results are input into the feedforward neural network to obtain the emotional output through the classification layer.Through the above processing flow,the model can capture semantic information and contextual relationships and achieve good results in various natural language processing tasks.Our model was tested on the CMU Multimodal Opinion Sentiment and Emotion Intensity(CMU-MOSEI)and Multimodal EmotionLines Dataset(MELD),achieving an accuracy of 82.04% and F1 parameters reached 80.59% on the former dataset.

Mechanism of imipenem-induced mental disorder: A meta-analysis

BACKGROUND Imipenem is a highly effective carbapenem antibiotic,which is widely used in the treatment of many serious bacterial infections.At the same time,it can also cause some adverse reactions,mental abnormalities are the most concerned central nervous system adverse reactions.Different patients respond differently to imipenem,and the effect of imipenem on psychiatric disorders is unclear.Therefore,meta-analysis summarizing the results of multiple previous studies can provide stronger evidence support for clinical guidelines to guide clinical rational use of imipenem to minimize risks.After reviewing the literature published between 2003 and 2017,seven controlled trials with a total of 550 patients were included,with 273 and 277 patients in the control and experimental groups,respectively.The sample size of the study ranged from a minimum of 30 cases to a maximum of 61 cases.Patients in the experimental group were treated with imipenem while the control group was treated with conventional drugs.Meta-analysis showed that the incidence of mental disorders in the experimental group was higher than that in the control group(odds ratio=3.66,95%confidence interval:1.11-12.11,P=0.030);however,there was no significant difference in the incidence of adverse reactions between the two groups(odds ratio=0.05,95%confidence interval:0.00 to 0.10,P=0.060).Funnel diagrams showed that the scattered points of each study were symmetrical and distributed in an inverted funnel shape;therefore,there was no publication bias.CONCLUSION Imipenem can cause mental disorders in patients.However,the low quality of the included literature may have affected the final results.Therefore,it is necessary to conduct a high-quality randomized controlled study with multiple samples to further confirm the mechanism of imipenem-induced mental disorders and provide effective guidance for clinical treatment.

Analysis and Design of the Globoidal Indexing Cam Mechanism

We first design and analyze the contour surface of the globoidal indexing cam with the aid of computer, and then do optimum design according to the requirements of dynamics. Finally, we discuss the problem of the pressure angle of the globoidal indexing cam mechanism in detail and put forward a new concept of equivalent pressure angle.

DYNAMICS ANALYSIS OF 2-DOF SPHERICAL PARALLEL MECHANISM

The analytical formulations of the velocity and the acceleration of a 2-DOF spherical parallel mechanism are derived by the screw theory. Based on building its dynamics model by the principle of virtual work and reciprocal product of the screw, the equation of the motor moment is obtained. Through the transformation of dynamics model, the configuration space method of the dynamics equation and the corresponding coefficients are presented. Finally, the result of an example shows that the inertia moment and the gravity play a more important role than the coriolis and centrifugal moment, and the former is ten times of the latter in the magnitude. So, the latter can be neglected only when the velocity of mechanism is very slow.

Error Analysis of Three Degree-of-Freedom Changeable Parallel Measuring Mechanism

A three degree-of-freedom (DOF) planar changeable parallel mechanism is designed by means of control of different drive parameters. This mechanism possesses the characteristics of two kinds of parallel mechanism. Based on its topologic structure, a coordinate system for position analysis is set-up and the forward kinematic solutions are analyzed. It was found that the parallel mechanism is partially decoupled. The relationship between original errors and position-stance error of moving platform is built according to the complete differential-coefficient theory. Then we present a special example with theory values and errors to evaluate the error model, and numerical error solutions are gained. The investigations concentrating on mechanism errors and actuator errors show that the mechanism errors have more influences on the position-stance of the moving platform. It is demonstrated that improving manufacturing and assembly techniques can greatly reduce the moving platform error. The small change in position-stance error in different kinematic positions proves that the error-compensation of software can improve considerably the precision of parallel mechanism.

Configuration and kinematics analysis of locking-releasing mechanism for side-loaded lunar rover

In order to save space for storing precision equipments,lower the center of mass of Lander and reduce lunar rover's dimension constraint limited by mechanism of Lander,the locking-releasing mechanism of side-loaded lunar rover loaded outside Lander is presented,which is a kind of metamorphic mechanism.To ensure the working of this mechanism as the metamorphic process designed,configuration analysis of the locking-releasing mechanism is carried out,and topological structures are described by Huston lower numbered arrays.A kinematic mathematical model of the mechanism is established through homogeneous transformation matrix.The kinematic simulation validates the feasibility of the locking-releasing mechanism when the configurations are shifted from one to the other.

Application of Task-Oriented Method of Serial Robot for Mechanism Analysis and Evaluation

Revealing the relations among robotic comprehensive performance,configuration,scales and working tasks is the basis to optimize robotic mechanism. Due to the correlation and diversity of the single performance indexes,statistical principles of linear dimension reduction and nonlinear dimension reduction are introduced into comprehensive performance analysis and evaluation for typical serial robot. The robotic mechanism's configuration,scales and task with the best comprehensive performance can be obtained by principal component analysis( PCA) and kernel principal component analysis( KPCA) respectively. The results show that KPCA can reveal the nonlinear relations among different single performance indexes more effectively and provide more comprehensive performance information than PCA. Thus,task-oriented method of serial robot for mechanism analysis and evaluation is proposed,which also provides scientific research basis for the mechanism synthesis and optimum task order.

Study on Numerical Comparison Method of Four-bar Straight-line Guidance Mechanism

In order to solve four-bar straight-line guidance mechanism synthesis problem for the arbitrarily given straight-line’s"angle requirement"and"point-position requirement",a numerical comparison synthesis method for single and double straight-line guidance mechanism is presented,which is convenient to realize by computer program.The basic idea of this method is:to select a four-bar linkage whose relative bar length of crank is 1 as a basic four-bar linkage.Then the other three relative bars’length is changed,and a lot of basic four-bar linkage can be obtained.There are many single and double ball-points of each basic four-bar linkage.With the motion of a basic four-bar linkage,there is straight-line segment of each Ball-point’s path.The data of these basic four-bar linkages is saved to a database.When designing a four-bar straight-line guidance mechanism,the design data is compared with the data in database and a satisfactory four-bar linkage can be obtained.The method effectively solves the straight-line guidance mechanism synthesis problem.

Vibration Analysis of Fetching Carton Mechanism of Square Carpets Packaging

In this paper,according to the cantilever beam of fetching carton mechanism in square packaging machine, considering the impact of motion of air cylinder on it,its dynamics model and finite element model are built by using ANSYS. This paper not only acquires the deformation distribution,stress distribution and natural frequency of the cantilever beam in the static state; but also gets the dynamic response curve in the maximum deformation and the dynamic stress response curve in the near of the maximum stress during the motion of air cylinder. Result shows that no matter static state or dynamic state,deformation of the cantilever in the fetching carton mechanism is acceptable. The design of mechanism is reliable and its motion is also stable; no resonance can occur on the cantilever beam.

Analysis and discussion on launching mechanism and tactical electromagnetic railgun technology

This paper begins with a discussion on the significance of multi-physical fields in the research of railgun launching mechanism, followed by an introduction of research work about dynamic measurements and numerical simulations. The application of some measurement methods including the atomic emission spectrum, fiber-optic strain, optical level, pulsed X-ray, and high-speed video in observing the launching process was introduced. The models about the electromechanical dynamic processes and multi-physical fields in a railgun were developed. The mechanisms of the grooving, arc transition, and gouging were analyzed. These work provided a deeper understanding of launching mechanism of electromagnetic railgun. Some issues about the tactical railgun, such as the fiber composite overwrapped barrel, recoil,loading modes and eddy current loss were also discussed. Taking a medium-caliber launcher as an example, the basic process of design and analysis was introduced.

INVERSE KINEMATIC AND DYNAMIC ANALYSIS OF A 3-DOF PARALLEL MECHANISM

According to the structure character of the passive sub-chain of the 3TPS-TPparallel mechanism, the kinematic constraint equations of the movable platform are established,based on which the closed-form inverse kinematics formula of the parallel mechanism are presented.Through parting the spherical joints of the active sub-chains and using the force and momentequilibrium of both the active sub-chains and passive sub-chain, the constraint forces acting on theparted joints are determined. Subsequently, the analytic expressions of the actuator driving forcesare derived by means of the force equilibrium of the upper links of active sub-chains.

VIBRATION NUMERICAL ANALYSIS OF COUNTER-ROTATING TURBINE WITH WAKE-FLOW USING FLUID-STRUCTURE INTERACTION METHOD

The design of counter-rotating turbine is one of new techniques to improve the thrust-weight ratio of jet propulsion engines.Numerical analysis of a low pressure（LP）counter-rotating turbine rotor blade is presented by using ANSYS/CFX software.Interaction of aerodynamics and solid mechanics coupling in the computation is applied.In some rating of turbine,stress distribution and vibration characteristics of low pressure turbine（LPT）blade are computed.The wake aerodynamic forces and LPT blade vibration are transformed in frequency domain using fast Fourier transform（FFT）method.The results show that under wake aerodynamic force excitation,the first order modal vibration is more easily aroused and the higher order response cannot be ignored.Moreover,with different temperature fields,the vibration responses of blade are also different.

FORCE ANALYSIS CONSIDERING MANUFACTURE ERROR OF PIN-HOLE-OUTPUT MECHANISM IN CYCLOID DRIVE

Based on the analysis of the pin-hole-output mechanism in the cycloid drive,a more accurate force analysis method is provided, in which the manufacture error is considered, bywhich the contact force between pin and pin-hole can be calculated more accurately in the wholedriving process.

FORWARD KINEMATICS ANALYSIS FOR A NOVEL 5-DOF PARALLEL MECHANISM USING TETRAHEDRON CONFIGURATIONS

Forward kinematics analysis of a novel 5-DOF parallel mechanism using tetrahedron configurations is presented. Such mechanism is suitable to many tasks requiring less than 6 DOFs. It consists of a movable platform connected to the base by five identical 6-DOF active limbs plus one active limb with its DOF being exactly the same as the specified DOF of the movable platform, which leads to its legs＇ topology 4-UPS/UPU. Based on the tetmhedron geometry, both closed-form solution with an extra sensor and numerical method using iterative algorithm are employed to obtain the forward kinematics solutions of the mechanism. Compared with the conventional methods, the proposed closed-form solution has the advantages in automatically avoiding unnecessary complex roots and getting a unique solution for the forward kinematics. Finally, an example shows that the proposed numerical algorithm is so effective that it enables a real-time forward kinematics solution to be achieved and the initial value can be chosen easily.

PERFORMANCE ANALYSIS AND KINEMATIC DESIGN OF PURE TRANSLATIONAL PARALLEL MECHANISM WITH VERTICAL GUIDE-WAYS

Performance analysis and kinematic design of the 3-PUU pure translational parallel mechanism with vertical guide-ways are investigated. Two novel performance indices, the critical slider stroke and the main section area of workspace, are defined; The expressions of two other indices, i.e. the global dexterity and global force transfer ratio are revised based on the main section of workspace. Using these indices, performance changes versus the varieties of dimensional parameters of mechanism are investigated in detail and the graphic descriptions of change tendencies of the performance indices are illustrated. By means of these obtained graphic descriptions, kinematic parameters for the 3-PUU pure translational parallel mechanism with better characteristics can be directly acquired.

Stiffness Analysis of Corrugated Flexure Beam Used in Compliant Mechanisms

Conventional flexible joints generally have limited range of motion and high stress concentration. To overcome these shortcomings, corrugated flexure beam（CF beam） is designed because of its large flexibility obtained from longer overall length on the same span. The successful design of compliant mechanisms using CF beam requires manipulation of the stiffnesses as the design variables. Empirical equations of the CF beam stiffness components, except of the torsional stiffness, are obtained by curve-fitting method. The application ranges of all the parameters in each empirical equation are also discussed. The ratio of off-axis to axial stiffness is considered as a key characteristic of an effective compliant joint. And parameter study shows that the radius of semi-circular segment and the length of straight segment contribute most to the ratio. At last, CF beam is used to design translational and rotational flexible joints, which also verifies the validity of the empirical equations. CF beam with large flexibility is presented, and empirical equations of its stiffness are proposed to facilitate the design of flexible joint with large range of motion.

Numerical simulation of compound media coupling mechanism of deep mining overburden strata

Aiming at the regularity of deep mining strata movement, through the application of plate theory and discrete medium theory in establishing the coupling model of the deep mining strata composite medium, the continuum media and the non-continuum media were coupled into the compound media giant system, and the stress of compound layer and strain coupling relationship were established. The accuracy of forecasting surface subsidence in deep mining conditions was improved. The deep mining was simulated through 3-D numerical value by the FLAC3D finite difference software, and the coupling relationship and coupling layer in the strata composite layer were analyzed. The results show that, under the deep mining condition, the coupling zone is in the position of coal seam roof with the thickness of 15-20 times, on which, the stress-strain has much difference on the coupling zone. Considering interlayer effect of coupling zone can improve the prediction precision of surface subsidence.