The two-rotational-degrees-of-freedom(2R) parallel mechanism(PM) with two continuous rotational axes(CRAs) has a simple kinematic model.It is therefore easy to implement trajectory planning,parameter calibration...The two-rotational-degrees-of-freedom(2R) parallel mechanism(PM) with two continuous rotational axes(CRAs) has a simple kinematic model.It is therefore easy to implement trajectory planning,parameter calibration,and motion control,which allows for a variety of application prospects.However,no systematic analysis on structural constraints of the 2R-PM with two CRAs has been performed,and there are only a few types of 2R-PM with two CRAs.Thus,a theory regarding the type synthesis of the 2R-PM with two CRAs is systematically established.First,combining the theories of reciprocal screw and space geometry,the spatial arrangement relationships of the constraint forces applied to the moving platform by the branches are explored,which give the 2R-PM two CRAs.The different distributions of the constraint forces in each branch are also studied.On the basis of the obtained structural constraints of branches,and considering the geometric relationships of constraint forces in each branch,the appropriate kinematic chains are constructed.Through the reasonable configuration of branch kinematic chains corresponding to every structural constraint,a series of new 2R-PMs with two CRAs are finally obtained.展开更多
Many rock types have naturally occurring inherent anisotropic planes, such as bedding planes, foliation,or flow structures. Such characteristic induces directional features and anisotropy in rocks' strength anddeform...Many rock types have naturally occurring inherent anisotropic planes, such as bedding planes, foliation,or flow structures. Such characteristic induces directional features and anisotropy in rocks' strength anddeformational properties. The HoekeBrown (HeB) failure criterion is an empirical strength criterionwidely applied to rock mechanics and engineering. A direct modification to HeB failure criterion toaccount for rock anisotropy is considered as the base of the research. Such modification introduced a newdefinition of the anisotropy as direct parameter named the anisotropic parameter (Kb). However, thecomputation of this parameter takes much experimental work and cannot be calculated in a simple way.The aim of this paper is to study the trend of the relation between the degree of anisotropy (Rc) and theminimum value of anisotropic parameter (Kmin), and to predict the Kmin directly from the uniaxialcompression tests instead of triaxial tests, and also to decrease the amount of experimental work. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.展开更多
The pincipl of a 6 DOF (degress of freedom) input device using ultrasonic distance measurement is presented in this paper. The system employs the method of measuring the time of flight. In addition, some techniques, i...The pincipl of a 6 DOF (degress of freedom) input device using ultrasonic distance measurement is presented in this paper. The system employs the method of measuring the time of flight. In addition, some techniques, including automatic gain control, self-adaptive variable threshold and temperature compensation, are also used to improve precision. Then, the positions and orientation of the input device can be calculated by the method of spatial analytic geometry. Meanwhile, commands from the 3-D input device are detected and carried out. The validity and precision of the input device are verified by the experiment in a robot system. The proposed device not only can be used for end effector position and orientation measurement in telerobotics, but also can be an interactive device in virtual reality systems, such as helmet tracking, viewpoint navigation and object manipulation.展开更多
Generalized Thue-Morse sequences were introduced into the vibrational problem of a chain of masses linked by springs of constant strength, and the increasing property of spectrum of linear operator about the vibration...Generalized Thue-Morse sequences were introduced into the vibrational problem of a chain of masses linked by springs of constant strength, and the increasing property of spectrum of linear operator about the vibrational model was proved.展开更多
In this paper, a six-order nonlinear dynamic model with three degrees of freedom is presented for the study of the 'fishtail' motion of a Single Point Mooring System. The effect of parameter variations on the ...In this paper, a six-order nonlinear dynamic model with three degrees of freedom is presented for the study of the 'fishtail' motion of a Single Point Mooring System. The effect of parameter variations on the equilibrium state of the system is analyzed. In order to study the stability of the equilibrium state, the mooring-line length l is chosen as a bifurcation parameter, so that all eigenvalues of the Jacobian matrix under different parameters can be worked out, and then the Hopf-bifurcation point can be found. Finally, the Hopf-bifurcation periodic solution of the system is computed.展开更多
In this paper, a computation method has been developed so as to compare the finite element method (FEM) with the test results directly. The structure is divided into the 'master' and 'slave' degrees of...In this paper, a computation method has been developed so as to compare the finite element method (FEM) with the test results directly. The structure is divided into the 'master' and 'slave' degrees of freedom. The simplified model can be obtained with modal reduction. Then the design sensitivity analysis of the eigenvalues and eigenvectors has been carried out using the modal frequency and modal shape of the test. A two-story frame structure and a jacket model structure have been calculated. Meanwhile, the modified coefficient, the FEM computational and experimental values have been given. It has been shown that the FEM model modified using the test modal value is efficient.展开更多
A newly-developed six-degree-of-freedom calibration system for the wind tunnel balances is introduced. The frame of the system, the functions and the operating principle of different parts are presented in detail. The...A newly-developed six-degree-of-freedom calibration system for the wind tunnel balances is introduced. The frame of the system, the functions and the operating principle of different parts are presented in detail. The system is composed of four parts: the automatically loading subsystem, the automatically resetting subsystem, the data-acquisition subsystem and the measurement subsystem. The results of some cell experiments proved that the system can meet the needs of the present calibration task of the balance. Through further improvement, the system can be also used to calibrate other devices with multi degree-of-freedom and measure the minute shifts, such as the guide rail of machine tool and the assembling of large parts and so on.展开更多
A 40-Gb/s optical time division multiplexing (OTDM) return-to-zero (RZ) transmission experiments including a dynamic polarization mode dispersion (PMD) compensation was reported. The dynamic PMD compensator is made up...A 40-Gb/s optical time division multiplexing (OTDM) return-to-zero (RZ) transmission experiments including a dynamic polarization mode dispersion (PMD) compensation was reported. The dynamic PMD compensator is made up of two-stage four degrees of freedom (DOF). The first stage adopts polarization controller and fixed time-delayed line. The second stage is variable differential group delay (DGD) element. The PMD monitoring technique is based on degree of polarization (DOP) as error signal. A novel practical adaptive optimization algorithm was introduced in dynamic adaptive PMD compensation. The experimental results show that the performance of the PMD compensator is excellent for 40-Gb/s RZ transmission systems with the large DGD. With this compensator, a significant improvement of system performance can be achieved in the eye pattern of a received signal. The first-order compensating ability of the compensator is greater than 30 ps. The second-order compensating ability is greater than 200 ps2. The first-order optimum compensating time is within 10 ms. The second-order optimum compensating time is within 24 ms.展开更多
For the existing problems of walking chair robot such as simple function,lower bearing capacity and not walking in complex environment,a novel varistructured quadruped / biped human-carrying walking chair robot is pro...For the existing problems of walking chair robot such as simple function,lower bearing capacity and not walking in complex environment,a novel varistructured quadruped / biped human-carrying walking chair robot is proposed.The proposed robot could be used as biped and quadruped walking chair robots.Considering the conversion of the walking chair robot from the quadruped to the biped or vice versa,6-UPS and 2-UPS+UP(U,P and S are universal joint,the prismatic pair,and sphere joint,respectively) parallel mechanisms are selected as the leg mechanism of the biped walking robot and quadruped walking robot,respectively.Combining the screw theory and theory of mechanism,the degrees of freedom of the leg mechanism and the body mechanism in diferent motion states are computed so as to meet the requirements of mechanism design.The motion characteristics of the 2-UPS+UP parallel mechanism which is the key part of the walking chair robot are analyzed.Then,the workspace of the moving platform is drawn and the efect of the structural parameters on the workspace volume is studied.Finally,it is found that the volume of the workspace of the moving platform is bigger when the side length ratio and the vertex angle ratio of the fxed platform and the moving platform which are isosceles triangles are close to 1.This study provides a theoretical foundation for the prototype development.展开更多
An MDOF model was developed including the influence of factors such as the engine, the seats, and the passengers to describe vehicle motion using a reduced order model of the controller designed by using the H∞ contr...An MDOF model was developed including the influence of factors such as the engine, the seats, and the passengers to describe vehicle motion using a reduced order model of the controller designed by using the H∞ control method. The control system performance has been investigated by comparing the H∞ controller with a linear quadratic (LQ) controller.展开更多
基金Supported by National Natural Science Foundation of China(Grant No.51405425)Hebei Provincial Natural Science Foundation of China(Grant No.E2014203255)Independent Research Program Topics of Young Teachers in Yanshan University,China(Grant No.13LGA001)
文摘The two-rotational-degrees-of-freedom(2R) parallel mechanism(PM) with two continuous rotational axes(CRAs) has a simple kinematic model.It is therefore easy to implement trajectory planning,parameter calibration,and motion control,which allows for a variety of application prospects.However,no systematic analysis on structural constraints of the 2R-PM with two CRAs has been performed,and there are only a few types of 2R-PM with two CRAs.Thus,a theory regarding the type synthesis of the 2R-PM with two CRAs is systematically established.First,combining the theories of reciprocal screw and space geometry,the spatial arrangement relationships of the constraint forces applied to the moving platform by the branches are explored,which give the 2R-PM two CRAs.The different distributions of the constraint forces in each branch are also studied.On the basis of the obtained structural constraints of branches,and considering the geometric relationships of constraint forces in each branch,the appropriate kinematic chains are constructed.Through the reasonable configuration of branch kinematic chains corresponding to every structural constraint,a series of new 2R-PMs with two CRAs are finally obtained.
文摘Many rock types have naturally occurring inherent anisotropic planes, such as bedding planes, foliation,or flow structures. Such characteristic induces directional features and anisotropy in rocks' strength anddeformational properties. The HoekeBrown (HeB) failure criterion is an empirical strength criterionwidely applied to rock mechanics and engineering. A direct modification to HeB failure criterion toaccount for rock anisotropy is considered as the base of the research. Such modification introduced a newdefinition of the anisotropy as direct parameter named the anisotropic parameter (Kb). However, thecomputation of this parameter takes much experimental work and cannot be calculated in a simple way.The aim of this paper is to study the trend of the relation between the degree of anisotropy (Rc) and theminimum value of anisotropic parameter (Kmin), and to predict the Kmin directly from the uniaxialcompression tests instead of triaxial tests, and also to decrease the amount of experimental work. 2014 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.
文摘The pincipl of a 6 DOF (degress of freedom) input device using ultrasonic distance measurement is presented in this paper. The system employs the method of measuring the time of flight. In addition, some techniques, including automatic gain control, self-adaptive variable threshold and temperature compensation, are also used to improve precision. Then, the positions and orientation of the input device can be calculated by the method of spatial analytic geometry. Meanwhile, commands from the 3-D input device are detected and carried out. The validity and precision of the input device are verified by the experiment in a robot system. The proposed device not only can be used for end effector position and orientation measurement in telerobotics, but also can be an interactive device in virtual reality systems, such as helmet tracking, viewpoint navigation and object manipulation.
文摘Generalized Thue-Morse sequences were introduced into the vibrational problem of a chain of masses linked by springs of constant strength, and the increasing property of spectrum of linear operator about the vibrational model was proved.
文摘In this paper, a six-order nonlinear dynamic model with three degrees of freedom is presented for the study of the 'fishtail' motion of a Single Point Mooring System. The effect of parameter variations on the equilibrium state of the system is analyzed. In order to study the stability of the equilibrium state, the mooring-line length l is chosen as a bifurcation parameter, so that all eigenvalues of the Jacobian matrix under different parameters can be worked out, and then the Hopf-bifurcation point can be found. Finally, the Hopf-bifurcation periodic solution of the system is computed.
文摘In this paper, a computation method has been developed so as to compare the finite element method (FEM) with the test results directly. The structure is divided into the 'master' and 'slave' degrees of freedom. The simplified model can be obtained with modal reduction. Then the design sensitivity analysis of the eigenvalues and eigenvectors has been carried out using the modal frequency and modal shape of the test. A two-story frame structure and a jacket model structure have been calculated. Meanwhile, the modified coefficient, the FEM computational and experimental values have been given. It has been shown that the FEM model modified using the test modal value is efficient.
基金This work was supported by the National Natural Science Foundation of China under Grant No. 60278008.
文摘A newly-developed six-degree-of-freedom calibration system for the wind tunnel balances is introduced. The frame of the system, the functions and the operating principle of different parts are presented in detail. The system is composed of four parts: the automatically loading subsystem, the automatically resetting subsystem, the data-acquisition subsystem and the measurement subsystem. The results of some cell experiments proved that the system can meet the needs of the present calibration task of the balance. Through further improvement, the system can be also used to calibrate other devices with multi degree-of-freedom and measure the minute shifts, such as the guide rail of machine tool and the assembling of large parts and so on.
基金This work was supported by the National Natural Science Foundation of China (No. 60177027 and 60377015) and the National "863" Project of China (No. 2001AA122042).
文摘A 40-Gb/s optical time division multiplexing (OTDM) return-to-zero (RZ) transmission experiments including a dynamic polarization mode dispersion (PMD) compensation was reported. The dynamic PMD compensator is made up of two-stage four degrees of freedom (DOF). The first stage adopts polarization controller and fixed time-delayed line. The second stage is variable differential group delay (DGD) element. The PMD monitoring technique is based on degree of polarization (DOP) as error signal. A novel practical adaptive optimization algorithm was introduced in dynamic adaptive PMD compensation. The experimental results show that the performance of the PMD compensator is excellent for 40-Gb/s RZ transmission systems with the large DGD. With this compensator, a significant improvement of system performance can be achieved in the eye pattern of a received signal. The first-order compensating ability of the compensator is greater than 30 ps. The second-order compensating ability is greater than 200 ps2. The first-order optimum compensating time is within 10 ms. The second-order optimum compensating time is within 24 ms.
基金supported by National Natural Science Foundation of China (No. 61075099) FP7-PEOPLE-2012-IRSES:Marie Curie Action "International Research Staf Exchange Scheme" (No. 318902)
文摘For the existing problems of walking chair robot such as simple function,lower bearing capacity and not walking in complex environment,a novel varistructured quadruped / biped human-carrying walking chair robot is proposed.The proposed robot could be used as biped and quadruped walking chair robots.Considering the conversion of the walking chair robot from the quadruped to the biped or vice versa,6-UPS and 2-UPS+UP(U,P and S are universal joint,the prismatic pair,and sphere joint,respectively) parallel mechanisms are selected as the leg mechanism of the biped walking robot and quadruped walking robot,respectively.Combining the screw theory and theory of mechanism,the degrees of freedom of the leg mechanism and the body mechanism in diferent motion states are computed so as to meet the requirements of mechanism design.The motion characteristics of the 2-UPS+UP parallel mechanism which is the key part of the walking chair robot are analyzed.Then,the workspace of the moving platform is drawn and the efect of the structural parameters on the workspace volume is studied.Finally,it is found that the volume of the workspace of the moving platform is bigger when the side length ratio and the vertex angle ratio of the fxed platform and the moving platform which are isosceles triangles are close to 1.This study provides a theoretical foundation for the prototype development.
文摘An MDOF model was developed including the influence of factors such as the engine, the seats, and the passengers to describe vehicle motion using a reduced order model of the controller designed by using the H∞ control method. The control system performance has been investigated by comparing the H∞ controller with a linear quadratic (LQ) controller.