Preparation of FeCoNi medium entropy alloy from Fe^(3+)-Co^(2+)-Ni^(2+)solution system

In recent years,medium entropy alloys have become a research hotspot due to their excellent physical and chemical performances.By controlling reasonable elemental composition and processing parameters,the medium entropy alloys can exhibit similar properties to high entropy alloys and have lower costs.In this paper,a FeCoNi medium entropy alloy precursor was prepared via sol-gel and coprecipitation methods,respectively,and FeCoNi medium entropy alloys were prepared by carbothermal and hydrogen reduction.The phases and magnetic properties of FeCoNi medium entropy alloy were investigated.Results showed that FeCoNi medium entropy alloy was produced by carbothermal and hydrogen reduction at 1500℃.Some carbon was detected in the FeCoNi medium entropy alloy prepared by carbothermal reduction.The alloy prepared by hydrogen reduction was uniform and showed a relatively high purity.Moreover,the hydrogen reduction product exhibited better saturation magnetization and lower coercivity.

Adaptive Robust Filtering Algorithm for BDS Medium and Long Baseline Three Carrier Ambiguity Resolution

For classical TCAR(three carrier ambiguity resolution)algorithm is affected by ionospheric delay and measurement noise,it is difficult to reliably fix ambiguity at medium and long baselines.An improved TCAR algorithm which takes the influence of ionospheric delay into account and has good adaptive robustness is proposed.On the basis of the non-geometric TCAR model,ionospheric delay is obtained by linearly combining extra-wide-lane with fixed ambiguity,and then wide-lane ambiguity is solved.Solving narrow-lane ambiguity by adaptive robust filtering by constructing optimal combination observation,which can effectively improve the fixed success rate of narrow-lane ambiguity and reduce the adverse effects of gross error.Experimental results show that the improved TCAR algorithm can guarantee a high fixed correct rate of wide-lane ambiguity,effectively improve fixed success rate of narrow-lane ambiguity,and has a good ability to resist gross error.

Conditioned medium from human dental pulp stem cells treats spinal cord injury by inhibiting microglial pyroptosis

Human dental pulp stem cell transplantation has been shown to be an effective therapeutic strategy for spinal cord injury.However,whether the human dental pulp stem cell secretome can contribute to functional recovery after spinal cord injury remains unclear.In the present study,we established a rat model of spinal cord injury based on impact injury from a dropped weight and then intraperitoneally injected the rats with conditioned medium from human dental pulp stem cells.We found that the conditioned medium effectively promoted the recovery of sensory and motor functions in rats with spinal cord injury,decreased expression of the microglial pyroptosis markers NLRP3,GSDMD,caspase-1,and interleukin-1β,promoted axonal and myelin regeneration,and inhibited the formation of glial scars.In addition,in a lipopolysaccharide-induced BV2 microglia model,conditioned medium from human dental pulp stem cells protected cells from pyroptosis by inhibiting the NLRP3/caspase-1/interleukin-1βpathway.These results indicate that conditioned medium from human dental pulp stem cells can reduce microglial pyroptosis by inhibiting the NLRP3/caspase-1/interleukin-1βpathway,thereby promoting the recovery of neurological function after spinal cord injury.Therefore,conditioned medium from human dental pulp stem cells may become an alternative therapy for spinal cord injury.

Filtering Two-Phase Medium in Pipes and Channels on the Entrance Part of Flow

Processes of filtering two-phase media in filtration devices play an important role in various industries. Significant role in the process of filtering is the initial section of flow, which defines the basic parameters： the profile and value of the velocity, pressure gradients, concentration and dispersion of sediment particles, etc. The problem is solved by the method of surfaces of equal cost, the results enabled to establish the influence of the input section on the filtering process.

Nonlinear Filtering With Sample-Based Approximation Under Constrained Communication:Progress, Insights and Trends

The nonlinear filtering problem has enduringly been an active research topic in both academia and industry due to its ever-growing theoretical importance and practical significance.The main objective of nonlinear filtering is to infer the states of a nonlinear dynamical system of interest based on the available noisy measurements. In recent years, the advance of network communication technology has not only popularized the networked systems with apparent advantages in terms of installation,cost and maintenance, but also brought about a series of challenges to the design of nonlinear filtering algorithms, among which the communication constraint has been recognized as a dominating concern. In this context, a great number of investigations have been launched towards the networked nonlinear filtering problem with communication constraints, and many samplebased nonlinear filters have been developed to deal with the highly nonlinear and/or non-Gaussian scenarios. The aim of this paper is to provide a timely survey about the recent advances on the sample-based networked nonlinear filtering problem from the perspective of communication constraints. More specifically, we first review three important families of sample-based filtering methods known as the unscented Kalman filter, particle filter,and maximum correntropy filter. Then, the latest developments are surveyed with stress on the topics regarding incomplete/imperfect information, limited resources and cyber security.Finally, several challenges and open problems are highlighted to shed some lights on the possible trends of future research in this realm.

Recursive Filtering for Stochastic Systems With Filter-and-Forward Successive Relays

In this paper,the recursive filtering problem is considered for stochastic systems over filter-and-forward successive relay(FFSR)networks.An FFSR is located between the sensor and the remote filter to forward the measurement.In the successive relay,two cooperative relay nodes are adopted to forward the signals alternatively,thereby existing switching characteristics and inter-relay interferences(IRI).Since the filter-and-forward scheme is employed,the signal received by the relay is retransmitted after it passes through a linear filter.The objective of the paper is to concurrently design optimal recursive filters for FFSR and stochastic systems against switching characteristics and IRI of relays.First,a uniform measurement model is proposed by analyzing the transmission mechanism of FFSR.Then,novel filter structures with switching parameters are constructed for both FFSR and stochastic systems.With the help of the inductive method,filtering error covariances are presented in the form of coupled difference equations.Next,the desired filter gain matrices are further obtained by minimizing the trace of filtering error covariances.Moreover,the stability performance of the filtering algorithm is analyzed where the uniform bound is guaranteed on the filtering error covariance.Finally,the effectiveness of the proposed filtering method over FFSR is verified by a three-order resistance-inductance-capacitance circuit system.

Bayesian Filtering for High-Dimensional State-Space Models With State Partition and Error Compensation

In the era of exponential growth of data availability,the architecture of systems has a trend toward high dimensionality,and directly exploiting holistic information for state inference is not always computationally affordable.This paper proposes a novel Bayesian filtering algorithm that considers algorithmic computational cost and estimation accuracy for high-dimensional linear systems.The high-dimensional state vector is divided into several blocks to save computation resources by avoiding the calculation of error covariance with immense dimensions.After that,two sequential states are estimated simultaneously by introducing an auxiliary variable in the new probability space,mitigating the performance degradation caused by state segmentation.Moreover,the computational cost and error covariance of the proposed algorithm are analyzed analytically to show its distinct features compared with several existing methods.Simulation results illustrate that the proposed Bayesian filtering can maintain a higher estimation accuracy with reasonable computational cost when applied to high-dimensional linear systems.

Dynamic Event-Triggered Quadratic Nonfragile Filtering for Non-Gaussian Systems:Tackling Multiplicative Noises and Missing Measurements

This paper focuses on the quadratic nonfragile filtering problem for linear non-Gaussian systems under multiplicative noises,multiple missing measurements as well as the dynamic event-triggered transmission scheme.The multiple missing measurements are characterized through random variables that obey some given probability distributions,and thresholds of the dynamic event-triggered scheme can be adjusted dynamically via an auxiliary variable.Our attention is concentrated on designing a dynamic event-triggered quadratic nonfragile filter in the well-known minimum-variance sense.To this end,the original system is first augmented by stacking its state/measurement vectors together with second-order Kronecker powers,thus the original design issue is reformulated as that of the augmented system.Subsequently,we analyze statistical properties of augmented noises as well as high-order moments of certain random parameters.With the aid of two well-defined matrix difference equations,we not only obtain upper bounds on filtering error covariances,but also minimize those bounds via carefully designing gain parameters.Finally,an example is presented to explain the effectiveness of this newly established quadratic filtering algorithm.

A Formulation of the Porous Medium Equation with Time-Dependent Porosity: A Priori Estimates and Regularity Results

We consider a generalized form of the porous medium equation where the porosity ϕis a function of time t: ϕ=ϕ(x,t): ∂(ϕS)∂t−∇⋅(k(S)∇S)=Q(S).In many works, the porosity ϕis either assumed to be independent of (or to depend very little of) the time variable t. In this work, we want to study the case where it does depend on t(and xas well). For this purpose, we make a change of unknown function V=ϕSin order to obtain a saturation-like (advection-diffusion) equation. A priori estimates and regularity results are established for the new equation based in part on what is known from the saturation equation, when ϕis independent of the time t. These results are then extended to the full saturation equation with time-dependent porosity ϕ=ϕ(x,t). In this analysis, we make explicitly the dependence of the various constants in the estimates on the porosity ϕby the introduced transport vector w, through the change of unknown function. Also we do not assume zero-flux boundary, but we carry the analysis for the case Q≡0.

3D robust anisotropic diffusion filtering algorithm for sparse view neutron computed tomography 3D image reconstruction

The most critical part of a neutron computed tomography(NCT) system is the image processing algorithm,which directly affects the quality and speed of the reconstructed images.Various types of noise in the system can degrade the quality of the reconstructed images.Therefore,to improve the quality of the reconstructed images of NCT systems,efficient image processing algorithms must be used.The anisotropic diffusion filtering(ADF) algorithm can not only effectively suppress the noise in the projection data,but also preserve the image edge structure information by reducing the diffusion at the image edges.Therefore,we propose the application of the ADF algorithm for NCT image reconstruction.To compare the performance of different algorithms in NCT systems,we reconstructed images using the ordered subset simultaneous algebraic reconstruction technique(OS-SART) algorithm with different regular terms as image processing algorithms.In the iterative reconstruction,we selected two image processing algorithms,the Total Variation and split Bregman solved total variation algorithms,for comparison with the performance of the ADF algorithm.Additionally,the filtered back-projection algorithm was used for comparison with an iterative algorithm.By reconstructing the projection data of the numerical and clock models,we compared and analyzed the effects of each algorithm applied in the NCT system.Based on the reconstruction results,OS-SART-ADF outperformed the other algorithms in terms of denoising,preserving the edge structure,and suppressing artifacts.For example,when the 3D Shepp–Logan was reconstructed at 25 views,the root mean square error of OS-SART-ADF was the smallest among the four iterative algorithms,at only 0.0292.The universal quality index,mean structural similarity,and correlation coefficient of the reconstructed image were the largest among all algorithms,with values of 0.9877,0.9878,and 0.9887,respectively.

Enhancing Erectile Function and Alleviating Andropause Symptoms: Clinical Efficacy of a Human Stem Cell Conditioned Medium Cream

Erectile dysfunction (ED) is increasingly prevalent in Japan, exceeding 30%, and increasing with age. Unhealthy lifestyle habits, obesity, insufficient exercise, and smoking have been implicated in its pathogenesis, along with endothelial dysfunction of the corpora cavernosa and impaired blood flow to the penis considered underlying factors. However, the current treatments are limited to Phosphodiesterase-5 (PDE5) inhibitors. ED is the primary symptom of andropathy. This study reports the clinical efficacy of human stem cell-conditioned medium cream for ED treatment. Ten men without underlying diseases suspected of andropause with ED (mean age 43.2 ± 4.4 y, Hb 15.2 ± 0.6 gm/dL, AST/ALT 30.2/37.9 ± 12.4/14.0, eGFR 82.7 ± 12.4 mL/min/1.73 m2) were targeted. The cream was applied twice daily to the genital and scrotal areas. The erectile hardness score (EHS), International Index of Erectile Function-5 (IIEF-5), and Aging Male Symptoms (AMS) scale were used to evaluate the participants before and 30 days after use, and the results were compared using paired t-tests. The post-use qualitative opinions were collected through interviews. Significant improvements were observed compared to baseline in the IIEF-5 (11.8 ± 4.6→17.2 ± 5.1, P < 0.001), and AMS (46.3 ± 6.7→37.6 ± 5.3, P < 0.001) scores post cream use. EHS did not show a statistically significant difference, but a trend towards improvement was observed. Qualitative feedback included increased morning erection, improved maintenance of erection during intercourse, and reduced post work fatigue. Human stem cell-conditioned medium contains endothelial growth factors that potentially contribute to the improvement of ED and andropause by enhancing corporal endothelial function. Future studies should include control groups to further investigate the efficacy of these treatments.

CRBFT:A Byzantine Fault-Tolerant Consensus Protocol Based on Collaborative Filtering Recommendation for Blockchains

Blockchain has been widely used in finance,the Internet of Things(IoT),supply chains,and other scenarios as a revolutionary technology.Consensus protocol plays a vital role in blockchain,which helps all participants to maintain the storage state consistently.However,with the improvement of network environment complexity and system scale,blockchain development is limited by the performance,security,and scalability of the consensus protocol.To address this problem,this paper introduces the collaborative filtering mechanism commonly used in the recommendation system into the Practical Byzantine Fault Tolerance(PBFT)and proposes a Byzantine fault-tolerant(BFT)consensus protocol based on collaborative filtering recommendation(CRBFT).Specifically,an improved collaborative filtering recommendation method is designed to use the similarity between a node’s recommendation opinions and those of the recommender as a basis for determining whether to adopt the recommendation opinions.This can amplify the recommendation voice of good nodes,weaken the impact of cunningmalicious nodes on the trust value calculation,andmake the calculated resultsmore accurate.In addition,the nodes are given voting power according to their trust value,and a weight randomelection algorithm is designed and implemented to reduce the risk of attack.The experimental results show that CRBFT can effectively eliminate various malicious nodes and improve the performance of blockchain systems in complex network environments,and the feasibility of CRBFT is also proven by theoretical analysis.

Review on the plastic instability of medium -Mn steels for identifying the formation mechanisms of Lüders and Portevin -Le Chatelier bands

Plastic instability,including both the discontinuous yielding and stress serrations,has been frequently observed during the tensile deformation of medium-Mn steels(MMnS)and has been intensively studied in recent years.Unfortunately,research results are controversial,and no consensus has been achieved regarding the topic.Here,we first summarize all the possible factors that affect the yielding and flow stress serrations in MMnS,including the morphology and stability of austenite,the feature of the phase interface,and the deformation parameters.Then,we propose a universal mechanism to explain the conflicting experimental results.We conclude that the discontinuous yielding can be attributed to the lack of mobile dislocation before deformation and the rapid dislocation multiplication at the beginning of plastic deformation.Meanwhile,the results show that the stress serrations are formed due to the pinning and depinning between dislocations and interstitial atoms in austenite.Strain-induced martensitic transformation,influenced by the mechanical stability of austenite grain and deformation parameters,should not be the intrinsic cause of plastic instability.However,it can intensify or weaken the discontinuous yielding and the stress serrations by affecting the mobility and density of dislocations,as well as the interaction between the interstitial atoms and dislocations in austenite grains.

A Dual-Cluster-Head Based Medium Access Control for Large-Scale UAV Ad-Hoc Networks

Unmanned Aerial Vehicle(UAV)ad hoc network has achieved significant growth for its flexibility,extensibility,and high deployability in recent years.The application of clustering scheme for UAV ad hoc network is imperative to enhance the performance of throughput and energy efficiency.In conventional clustering scheme,a single cluster head(CH)is always assigned in each cluster.However,this method has some weaknesses such as overload and premature death of CH when the number of UAVs increased.In order to solve this problem,we propose a dual-cluster-head based medium access control(DCHMAC)scheme for large-scale UAV networks.In DCHMAC,two CHs are elected to manage resource allocation and data forwarding cooperatively.Specifically,two CHs work on different channels.One of CH is used for intra-cluster communication and the other one is for inter-cluster communication.A Markov chain model is developed to analyse the throughput of the network.Simulation result shows that compared with FM-MAC(flying ad hoc networks multi-channel MAC,FM-MAC),DCHMAC improves the throughput by approximately 20%~50%and prolongs the network lifetime by approximately 40%.

Heat-Generating Effects Involving Multiple Nanofluids in a Hybrid Convective Boundary Layer Flow on the Sloping Plate in a Porous Medium

The hybrid convective boundary layer circulation involving multiple nanofluids via a medium with pores is approaching a sloping plate. An investigation regarding the heat-generating effects upon the examined nanofluid flows has been carried out through computational analysis. A mathematical framework employing governing differential equations that are partial has been implemented to produce an ensemble of ordinary differential equations, which happen to be nonlinear that incorporate nanofluid flows by utilizing acceptable transformations. Through the combination of the Nachtsheim-Swigert shooting method and the Runge-Kutta method, the group of resulting non-dimensionalized equations is solved computationally. In a few special, confined cases, the corresponding numeric output is thereafter satisfactorily matched with the existing available research. The consequences of heat generation regarding local skin friction coefficient and rate of heat in conjunction with mass transfer have been investigated, evaluated, and reported on the basis of multiple nanofluid flows.

Multiple Matching Attenuation Based on Curvelet Domain Extended Filtering

The paper develops a multiple matching attenuation method based on extended filtering in the curvelet domain,which combines the traditional Wiener filtering method with the matching attenuation method in curvelet domain.Firstly,the method uses the predicted multiple data to generate the Hilbert transform records,time derivative records and time derivative records of Hilbert transform.Then,the above records are transformed into the curvelet domain and multiple matching attenuation based on least squares extended filtering is performed.Finally,the attenuation results are transformed back into the time-space domain.Tests on the model data and field data show that the method proposed in the paper effectively suppress the multiples while preserving the primaries well.Furthermore,it has higher accuracy in eliminating multiple reflections,which is more suitable for the multiple attenuation tasks in the areas with complex structures compared to the time-space domain extended filtering method and the conventional curvelet transform method.

Micromechanism and mathematical model of stress sensitivity in tight reservoirs of binary granular medium

Research on reservoir rock stress sensitivity has traditionally focused on unary granular structures,neglecting the binary nature of real reservoirs,especially tight reservoirs.Understanding the stresssensitive behavior and mathematical characterization of binary granular media remains a challenging task.In this study,we conducted online-NMR experiments to investigate the permeability and porosity evolution as well as stress-sensitive control mechanisms in tight sandy conglomerate samples.The results revealed stress sensitivity coefficients between 0.042 and 0.098 and permeability damage rates ranging from 65.6%to 90.9%,with an average pore compression coefficient of 0.0168—0.0208 MPa 1.Pore-scale compression occurred in three stages:filling,compression,and compaction,with matrix pores playing a dominant role in pore compression.The stress sensitivity of binary granular media was found to be influenced by the support structure and particle properties.High stress sensitivity was associated with small fine particle size,high fines content,high uniformity coefficient of particle size,high plastic deformation,and low Young's modulus.Matrix-supported samples exhibited a high irreversible permeability damage rate(average=74.2%)and stress sensitivity coefficients(average=0.089),with pore spaces more slit-like.In contrast,grain-supported samples showed low stress sensitivity coefficients(average=0.021)at high stress stages.Based on the experiments,we developed a mathematical model for stress sensitivity in binary granular media,considering binary granular properties and nested interactions using Hertz contact deformation and Poiseuille theory.By describing the change in activity content of fines under stress,we characterized the non-stationary state of compressive deformation in the binary granular structure and classified the reservoir into three categories.The model was applied for production prediction using actual data from the Mahu reservoir in China,showing that the energy retention rates of support-dominated,fill-dominated,and matrix-controlled reservoirs should be higher than 70.1%,88%,and 90.2%,respectively.

Accurate method based on data filtering for quantitative multi-element analysis of soils using CF-LIBS

To obtain more stable spectral data for accurate quantitative analysis of multi-element,especially for the large-area in-situ elements detection of soils, we propose a method for a multielement quantitative analysis of soils using calibration-free laser-induced breakdown spectroscopy(CF-LIBS) based on data filtering. In this study, we analyze a standard soil sample doped with two heavy metal elements, Cu and Cd, with a specific focus on the line of Cu I324.75 nm for filtering the experimental data of multiple sample sets. Pre-and post-data filtering,the relative standard deviation for Cu decreased from 30% to 10%, The limits of detection(LOD)values for Cu and Cd decreased by 5% and 4%, respectively. Through CF-LIBS, a quantitative analysis was conducted to determine the relative content of elements in soils. Using Cu as a reference, the concentration of Cd was accurately calculated. The results show that post-data filtering, the average relative error of the Cd decreases from 11% to 5%, indicating the effectiveness of data filtering in improving the accuracy of quantitative analysis. Moreover, the content of Si, Fe and other elements can be accurately calculated using this method. To further correct the calculation, the results for Cd was used to provide a more precise calculation. This approach is of great importance for the large-area in-situ heavy metals and trace elements detection in soil, as well as for rapid and accurate quantitative analysis.

Electrically controllable spin filtering in zigzag phosphorene nanoribbon based normal–antiferromagnet–normal junctions

We investigated the electric controllable spin-filtering effect in a zigzag phosphorene nanoribbon(ZPNR) based normal–antiferromagnet–normal junction. Two ferromagnets are closely coupled to the edges of the nanoribbon and form the edge-to-edge antiferromagnetism. Under an in-plane electric field, the two degenerate edge bands of the edge-to-edge antiferromagnet split into four spin-polarized sub-bands and a 100% spin-polarized current can be easily induced with the maximal conductance 2e~2/h. The spin polarization changes with the strength of the electric field and the exchange field,and changes sign at opposite electric fields. The spin-polarized current switches from one edge to the other by reversing the direction of the electric field. The edge current can also be controlled spatially by changing the electric potential of the scattering region. The manipulation of edge current is useful in spin-transfer-torque magnetic random-access memory and provides a practical way to develop controllable spintronic devices.

Assessing Factors Influencing Solar Energy Adoption among Small and Medium Enterprises in Mzuzu City, Malawi

One of the many renewable energy sources that offer advantages is solar energy, which also lowers energy prices and promotes environmental sustainability and energy security. Despite these advantages, various barriers, such as installation costs, have prevented small and medium-sized enterprises from investigating this invention. Malawi has a significant energy shortfall such that most businesses have been hindered from their profit maximization goals. The “Photovoltaic systems” (PV) that transform sunlight into electricity are the subject of this study. This type of solar energy system is situated on the building’s roof and generally produces electricity for businesses and even homes. Solar energy offers a great impact to small and medium enterprises in Mzuzu city with a cost-effective and dependable alternative to energy that has the potential to change the game. Therefore the aim of the study was to identify factors that encourage the adoption of solar energy among small medium enterprises in the city of Mzuzu city. And to identify some of barriers faced when adopting solar energy among small and medium enterprises in the city of Mzuzu. The research approach employed in the study was a survey. A survey is a type of research methodology in which primary data is gathered from a sample using a questionnaire. When information is to be gathered from a wider sample, a survey is employed. A bigger sample size was needed in this study in order to facilitate hypothesis testing. It is advised to apply a logical approach while using the survey. The survey utilized a five-point Likert scale. The study used convenience sampling to select study participants. The sample size in this study was determined using Cochran’s sample size formula. Statistical Package for Social Sciences (SPSS) and Microsoft Excel were used for statistical analysis. About 97.2% of the participants were aware of solar as a source of energy compared to 2.8 % who were unaware. The majority of participants use solar energy for lighting only, seconded by those who use electricity. The least number of participants use solar energy for cooling only. The majority of participants 21.5% indicated partnership and collaboration as the most motivating factor for the adoption of solar energy. This was followed by technical expertise 19.1 % the least number of participants 10.8% expressed that policy and regulatory frameworks were associated with the adoption of solar energy. This study found that there are no statistically significant factors influencing barriers to the adoption of solar energy. The price of solar energy adoption was identified as the least factor associated with the acceptance or rejection of solar energy. Nonetheless, the reasons given by the homes that had embraced solar technology aligned with the findings of other studies. This survey also found that although the public was aware of solar energy, and technology, there were still a number of factors that mattered, especially for non-adopters.