Based on the temperature situation during the rolling process of 4200 mm/3500 mm medium and thick plates at Baosteel,this article analyzes the influencing factors of temperature changes during the rolling process from...Based on the temperature situation during the rolling process of 4200 mm/3500 mm medium and thick plates at Baosteel,this article analyzes the influencing factors of temperature changes during the rolling process from the perspective of heat transfer theory and the temperature change law during the rolling process.The temperature loss during the four rolling processes is tracked on site,and the temperature drop model parameters during the rolling process of 4200mm/3500mm medium and thick plates at Baosteel are quantitatively provided.It is applied to actual rolling production and has achieved good results.展开更多
A fundamental theory for the analysis of residual welding stresses and deformation based on the inherent strain distribution along the welded joint is introduced. Distribution of inherent strains and longitudinal resi...A fundamental theory for the analysis of residual welding stresses and deformation based on the inherent strain distribution along the welded joint is introduced. Distribution of inherent strains and longitudinal residual stresses in medium thickness plate weldment is calculated and analyzed. A new method of calculating inherent strains and longitudinal residual stresses is proposed.展开更多
The 3-D traction field in the pressure screw-pair of a 3 500 heavy and mediumplate mill press down system is successfully calculated by applying the 3-D frictional contactmultipole-BEM and the corresponding program th...The 3-D traction field in the pressure screw-pair of a 3 500 heavy and mediumplate mill press down system is successfully calculated by applying the 3-D frictional contactmultipole-BEM and the corresponding program that has been developed. The computing results show themedium diameter orientation is unreliable, especially under the interference of an outer forcecouple. Under such working conditions, the circumferential traction distribution on the screw teethis extremely uneven, which is the main reason for the destruction and short life time ofscrew-pairs. When utilizing the same precision (the relative tolerance is 10X10^(-5)), themultipole-BEM uses almost the same CPU time as used by the FEM, but the needed computer memory sizeis only one eightieth of that needed by the FEM (10 MB vs. 800 MB). The multipole-BEM is well suitedfor computing large-scale engineering problems.展开更多
文摘Based on the temperature situation during the rolling process of 4200 mm/3500 mm medium and thick plates at Baosteel,this article analyzes the influencing factors of temperature changes during the rolling process from the perspective of heat transfer theory and the temperature change law during the rolling process.The temperature loss during the four rolling processes is tracked on site,and the temperature drop model parameters during the rolling process of 4200mm/3500mm medium and thick plates at Baosteel are quantitatively provided.It is applied to actual rolling production and has achieved good results.
文摘A fundamental theory for the analysis of residual welding stresses and deformation based on the inherent strain distribution along the welded joint is introduced. Distribution of inherent strains and longitudinal residual stresses in medium thickness plate weldment is calculated and analyzed. A new method of calculating inherent strains and longitudinal residual stresses is proposed.
基金This project is supported by National Natural Science Foundation of China(No.50075075) National "Ten-Five" Science and Technology Project of China(No.ZZ 01-13A-02-02-03). J
文摘The 3-D traction field in the pressure screw-pair of a 3 500 heavy and mediumplate mill press down system is successfully calculated by applying the 3-D frictional contactmultipole-BEM and the corresponding program that has been developed. The computing results show themedium diameter orientation is unreliable, especially under the interference of an outer forcecouple. Under such working conditions, the circumferential traction distribution on the screw teethis extremely uneven, which is the main reason for the destruction and short life time ofscrew-pairs. When utilizing the same precision (the relative tolerance is 10X10^(-5)), themultipole-BEM uses almost the same CPU time as used by the FEM, but the needed computer memory sizeis only one eightieth of that needed by the FEM (10 MB vs. 800 MB). The multipole-BEM is well suitedfor computing large-scale engineering problems.
