The rationality of using strain energy storage index(Wet)for evaluating rockburst proneness was theoretically verified based on linear energy storage(LES)law in this study.The LES law is defined as the linear relation...The rationality of using strain energy storage index(Wet)for evaluating rockburst proneness was theoretically verified based on linear energy storage(LES)law in this study.The LES law is defined as the linear relationship between the elastic strain energy stored inside the solid material and the input strain energy during loading.It is used to determine the elastic strain energy and dissipated strain energy of rock specimens at various loading/unloading stress levels.The results showed that the Wetvalue obtained from experiments was close to the corresponding theoretical one from the LES law.Furthermore,with an increase in the loading/unloading stress level,the ratio of elastic strain energy to dissipated strain energy converged to the peak-strength strain energy storage index(Wp et).This index is stable and can better reflect the relative magnitudes of the stored energy and the dissipated energy of rocks at the whole pre-peak stage than the strain energy storage index.The peak-strength strain energy storage index can replace the conventional strain energy storage index as a new index for evaluating rockburst proneness.展开更多
The strain energy storage index WET was widely used to evaluate coal burst liability,but the scientific evidence for selecting the unloading stress level interval(around 80%of peak strength)remains lacking,and WET can...The strain energy storage index WET was widely used to evaluate coal burst liability,but the scientific evidence for selecting the unloading stress level interval(around 80%of peak strength)remains lacking,and WET can not reflect the energy storage and dissipation ratio(ESD ratio)of the whole pre-peak stage for coal materials.In this study,these two key problems in WET calculation and application were solved based on the linear energy storage(LES)law.The LES law was defined as the linear relationship between the elastic strain energy and input strain energy for solid material during loading.Using the LES law,the elastic strain energy and dissipated strain energy of at 10 types of coals were calculated precisely,and ideal ESD ratio and general ESD ratio at any stress level will be obtained subsequently.The results also show that WET is extremely close to the ideal and general ESD ratio,which proves that the selecting stress level of WET calculation is scientific and reasonable.Furthermore,the general ESD ratio converges to the peak ESD ratio(namely peak strain energy storage index WET P)as stress level increases.Compared with WET,Wp ET not only reflects the ESD ratio of coal materials over the whole pre-peak loading stage,but also exhibits excellent stability.Consequently,Wp ET is suggested as a new evaluation index of coal burst liability.展开更多
Coal burst remains one of the gravest safety risks that will be encountered in mining in the future, because the stress conditions will become more complex as mining depths increase. Various influencing elements exist...Coal burst remains one of the gravest safety risks that will be encountered in mining in the future, because the stress conditions will become more complex as mining depths increase. Various influencing elements exist, and varied geological and mining circumstances might result in diverse coal burst phenomena. The impact propensity of coal has variations as a result of the distinct physical and mechanical qualities of each. To identify the impact propensity of coal and then understand the rules of coal burst occurrence, laboratory tests can be conducted to identify the physical and mechanical parameters affecting coal samples. The mechanical properties, energy absorption, and energy dissipation characteristics of coal samples were examined experimentally in this paper using coal samples that were taken from the mine. On the basis of the evaluation of the impact inclination parameters for four fundamental coal samples, novel impact inclination indicators and the relationship between the fractures in the coal sample and the impact inclination parameters were discussed. The following are the key conclusions: 1) On-site samples of No. 15 coal from the Qi yuan Coal Mine were taken (15 s) and processed in accordance with the guidelines for the coal specimen impact inclination test. The accuracy of the specimen was sufficient for the test. 2) Analysis is done on the mechanical relevance and calculation techniques of the four fundamental coal sample impact tendency characteristics, dynamic failure time (DT), elastic strain energy index (W<sub>ET</sub>), impact energy index (K<sub>E</sub>), as well as uniaxial compressive strength (R<sub>C</sub>). 3) Regarding the rock burst danger of rock samples, the potential use of the ratio of pre-peak and post- peak deformation modulus to Kλ and the residual elastic strain energy index C<sub>EF</sub> as the impact propensity indices of coal samples are discussed. It is possible to utilize two new impact propensity indices to evaluate the impact propensity of coal samples, according to test results that reveal a linear correlation between two new impact inclination indexes and four fundamental impact tendency indexes. 4) The statistical analysis of the crack ratio with the four impact propensity indicators after coal specimen failure, and the correlation among the crack ratio with the indicators, are both done. The findings indicate that the four impact propensity indicators have a linear relationship with the crack ratio of the coal sample surface cracks.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.42077244 and 41877272)the Fundamental Research Funds for the Central Universities(Grant No.2242022k30054)。
文摘The rationality of using strain energy storage index(Wet)for evaluating rockburst proneness was theoretically verified based on linear energy storage(LES)law in this study.The LES law is defined as the linear relationship between the elastic strain energy stored inside the solid material and the input strain energy during loading.It is used to determine the elastic strain energy and dissipated strain energy of rock specimens at various loading/unloading stress levels.The results showed that the Wetvalue obtained from experiments was close to the corresponding theoretical one from the LES law.Furthermore,with an increase in the loading/unloading stress level,the ratio of elastic strain energy to dissipated strain energy converged to the peak-strength strain energy storage index(Wp et).This index is stable and can better reflect the relative magnitudes of the stored energy and the dissipated energy of rocks at the whole pre-peak stage than the strain energy storage index.The peak-strength strain energy storage index can replace the conventional strain energy storage index as a new index for evaluating rockburst proneness.
基金supported by the National Natural Science Foundation of China (Grant No.41877272,42077244).
文摘The strain energy storage index WET was widely used to evaluate coal burst liability,but the scientific evidence for selecting the unloading stress level interval(around 80%of peak strength)remains lacking,and WET can not reflect the energy storage and dissipation ratio(ESD ratio)of the whole pre-peak stage for coal materials.In this study,these two key problems in WET calculation and application were solved based on the linear energy storage(LES)law.The LES law was defined as the linear relationship between the elastic strain energy and input strain energy for solid material during loading.Using the LES law,the elastic strain energy and dissipated strain energy of at 10 types of coals were calculated precisely,and ideal ESD ratio and general ESD ratio at any stress level will be obtained subsequently.The results also show that WET is extremely close to the ideal and general ESD ratio,which proves that the selecting stress level of WET calculation is scientific and reasonable.Furthermore,the general ESD ratio converges to the peak ESD ratio(namely peak strain energy storage index WET P)as stress level increases.Compared with WET,Wp ET not only reflects the ESD ratio of coal materials over the whole pre-peak loading stage,but also exhibits excellent stability.Consequently,Wp ET is suggested as a new evaluation index of coal burst liability.
文摘Coal burst remains one of the gravest safety risks that will be encountered in mining in the future, because the stress conditions will become more complex as mining depths increase. Various influencing elements exist, and varied geological and mining circumstances might result in diverse coal burst phenomena. The impact propensity of coal has variations as a result of the distinct physical and mechanical qualities of each. To identify the impact propensity of coal and then understand the rules of coal burst occurrence, laboratory tests can be conducted to identify the physical and mechanical parameters affecting coal samples. The mechanical properties, energy absorption, and energy dissipation characteristics of coal samples were examined experimentally in this paper using coal samples that were taken from the mine. On the basis of the evaluation of the impact inclination parameters for four fundamental coal samples, novel impact inclination indicators and the relationship between the fractures in the coal sample and the impact inclination parameters were discussed. The following are the key conclusions: 1) On-site samples of No. 15 coal from the Qi yuan Coal Mine were taken (15 s) and processed in accordance with the guidelines for the coal specimen impact inclination test. The accuracy of the specimen was sufficient for the test. 2) Analysis is done on the mechanical relevance and calculation techniques of the four fundamental coal sample impact tendency characteristics, dynamic failure time (DT), elastic strain energy index (W<sub>ET</sub>), impact energy index (K<sub>E</sub>), as well as uniaxial compressive strength (R<sub>C</sub>). 3) Regarding the rock burst danger of rock samples, the potential use of the ratio of pre-peak and post- peak deformation modulus to Kλ and the residual elastic strain energy index C<sub>EF</sub> as the impact propensity indices of coal samples are discussed. It is possible to utilize two new impact propensity indices to evaluate the impact propensity of coal samples, according to test results that reveal a linear correlation between two new impact inclination indexes and four fundamental impact tendency indexes. 4) The statistical analysis of the crack ratio with the four impact propensity indicators after coal specimen failure, and the correlation among the crack ratio with the indicators, are both done. The findings indicate that the four impact propensity indicators have a linear relationship with the crack ratio of the coal sample surface cracks.
