Investigation of Oxidation-Reduction Properties of Growing Mediums for Cell Culture of Mammals under the Effect of Cosmo-Geophysical Factors

In model experiments were studied the effect of cosmo-geophysical factors of environment (hypomagnetic conditions during 2 days ≈ 1 mkT;electromagnetic irradiation (10 min - 2 MHz with amplitude 5 V/m and power 30 mkVt, background 2 - 4 mkVt), γ-quantum (10 min—from the source 137Cs) and its combined effect on the physic-chemical properties (ORP and pH) of growing medium for cell culture of mammals as nutrition medium 199 (PanEco, Russia). It was used a clear solution of medium (solution 1) and with the adding of 10% embryo bull serum—model of bio-medium (solution 2). Hypomagnetic conditions evoked the decreasing of ORP and pH value in both solutions, electromagnetic irradiation in the solution 1 which evoked the decreasing of ORP and the increasing of pH value, and in the solution 2, on the contrary, the increasing of ORP with the unchanging pH value. γ-radiation sharply decreased ORP value and didn’t change pH in solution 1, i.e. the reduction properties increased. There is insignificant increasing of ORP value and the decreasing of pH is noted in the solution 2, that it is characterized with the increasing of oxidative properties of solution. Under the combined effect of hypomagnetic conditions and electromagnetic irradiation, the values of investigating parameters in the solution 1 decreased and in the solution 2 increased. It was observed acute decreasing of ORP value in both solutions under the combined effect of hypomagnetic conditions and γ-radiation, i.e. the reductive properties of the solutions increased sharply. In this the concentration H+ significantly decreased, (p γ-radiation led to the decreasing of ORP and pH values in both solutions. Thus, the studying factors significantly change the oxidation-reduction properties of growing mediums. The investigation of the processes in biological mediums plays the important role in the assessment of environment effect during the flight in inter-planet space.

Oily Wastewater Treatment by Porous Ceramics Mediums with Surface Lipophilic Modification

Aiming at the treatment of difficult-to-handle oily wastewater, the ceramics filter mediums made from the iron and steel plant sludge were adopted to surface lipophilic modification so as to remove oil efficiently. The hydrolysis technique by FTIR and conductivity test indicated that under acid conditions hydrogen silicon oil did not hydrolyze but release hydrogen by chemical reaction under alkaline conditions. The results of the experiments including contact angle measurement, FTIR analysis, and SEM analysis illustrate that a layer of lipophile coating indeed exists evenly on the surface of filter mediums after modification. Furthermore, the hydrogen-containing silicone oil was combined through dehydration of Si-H bond with the-OH on the surface of ceramic filter medium.

Effects of mother tree ages, different rooting mediums, light conditions and auxin treatments on rooting behaviour of Dalbergia sissoo branch cuttings

Dalbergia sissoo Roxb. is one of the promising multipurpose tree species of South Asia. Most of the plantations of D. sissoo from seeds are facing severe threats due to the die-back disease, which ultimately causes death of this potential tree-species within a few months. Vegetative propagation could avoid the die-back disease. Thirty mother trees of different age-groups of D. sissoo were selected for evaluating the rooting behaviour of branch cuttings from D. sissoo as influenced by auxins （IAA or IBA at 100, 200, 500 mg·L^-1）, ages of mother trees （10, 4 and 2 years old） and different environment conditions, i.e., different mediums （soil and sand） or light conditions （in shade and open condition）. The results show that application of IAA and IBA induced more numbers of cuttings （collected from 10-year-old mother trees） to root compared to control. Branch cuttings of D. sissoo collected from 10-year-old mother trees and planted in soil bed in open conditions had 100.0% of cuttings to root in IAA （100 mg·L^-1） and IBA （200 mg·L^-1） treatments. Both rooting medium （Soil and sand） influenced significantly （p〈0.05） on rooting response of branch cuttings. Soil medium was found to achieve maximum no. of branch cuttings to root, compared to sand medium.

Effect of Heat Sink and Cooling Mediums on Ferrite Austenite Ratio and Distortion in Laser Welding of Duplex Stainless Steel 2205

In order to control the ferrite and austenite percentage in duplex stainless steel welding, many researchers try to change the laser welding parameters and cooling medium, but ignore to study the influence of heat sink effect on weld strength. In this work, the effect of aluminium heat sink and varying cooling medium on the laser welding of duplex stainless steel (DSS) 2205 is studied. The 2 mm thick DSS sheets welded with pulsed Nd: YAG laser welding machine by varying the cooling medium (air and oil) and an aluminium plate used as a heat sink. The welded specimens tested for tensile strength, micro-hardness, distortion, microstructure and radiography analysis. The faster cooling rate in the oil quenching process enhances the ferrite percentage compared with air-cooled samples. But the faster cooling rate in oil quenching leads to more distortion and using aluminium as a heat sink influenced positively the distortion to a small extent. The lower cooling rate in air quenching leads to a higher tensile strength of the welded specimen. The objective of this work is to analyse experimentally the effect of cooling medium and heat sink in the mechanical and metallurgical properties of laser welded duplex stainless steel.

Factors involved in the success of Castanea henryi stem cuttings in different cutting mediums and cutting selection periods

Chinquapin(Castanea henryi) is a dual-purpose tree species in China valued for as a source of timber and starch.We investigated the effect of four cutting mediums(pure vermiculite;peat:river sand at 3:1 v/v;peat:krasnozem at 1:1 v/v;and pure krasnozem) and three stem cutting periods(March,May,and July) on rooting performance of C.henryi cuttings.Different cutting periods and cutting mediums greatly influenced the rooting rate of C.henryi,ranging from 3.35 to 77.31%.Principal component analysis indicated that the best combination of cutting period and cutting medium was semi-hardwood cuttings(May cuttings)+krasnozem.Histological evidence indicated that adventitious root initials were present by week 5-6,and that the site of root primordia initiation was observed in the vascular cambium.Stem anatomical structures observed at different periods indicated that a xylem/radius ratio of29.90-37.42% and a fractured phloem fiber ring are indicative of rooting success.The relational model between rooting index and medium properties indicated that nutrient content and porosity significantly influenced callus production.However,pH strongly affected C.henryi root formation,with the Pearson correlation coefficients for May and July cuttings of-0.856 and-0.947,respectively.Our protocol is helpful to achieve mass clone propagation of improved C.henryi genotypes,thus overcoming a common hurdle in chinquapin breeding programs.

Nonreciprocal transmission of electromagnetic waves by three-layer magneto-optical mediums

We investigate the non-reciprocal transmission properties of a three-layer structure filled with magneto–optical medium and normal medium. Based on the transfer matrix method, we deduce the total transmission coefficient for a one-dimensional(1 D) structure with anisotropic mediums. When two-side layers with magneto–optical medium loaded in opposite external magnetic field, the time-reversal symmetry of transmission properties will be broken. Our numerical results show that the non-reciprocal transmission properties are influenced by external magnetic fields, incident angle, and thickness of the normal medium layer. Since the non-reciprocal properties can be easily realized and adjusted by the simple structure, such a design has potential applications in integrated circulators and isolators.

The Near-Field Microwave Focusing in the Layer Mediums

This paper deals with the microwave focusing in the layer mediums near the antenna aperture. Based on the plane-wave spectrum theory, the relationship between the Hertz potential and the electromagnetic field is discussed. An approach to the description of the field distribution in the layer mediums in case of an arbitary field source is proposed. Given the focusing current distribution over the antenna aperture, the field distribution of the focal region is worked out. In describing the field distribution over the focal region, the integration of spectrum functions in the spectrum domain (kx,ky) is carried out instead of the complicated Fresnel integral. The approximations are obtained by the saddle-point integration. Comparison with experimental results demonstrates the validity of the approach.

数字普惠金融发展、资源错配抑制与中小企业景气提升

金融歧视下的资源错配,已成为中小企业健康可持续发展的掣肘。如何突破这一约束,融合“普”与“惠”的数字普惠金融被寄予厚望。本文基于数字普惠金融的内涵与中小企业健康可持续发展对金融资源的诉求进行理论分析,然后构建链式多重中介效应模型,利用江苏省13个地级市的数字普惠金融指数及中小企业发展调研数据,检验数字普惠金融发展对中小企业景气提升的作用及其机制。结果发现:数字普惠金融对中小企业景气提升具有显著的正向作用,覆盖广度、使用深度和数字化程度的提高都能促进中小企业景气指数上升。机制分析表明,数字普惠金融的发展能降低中小企业融资成本,从而提高融资匹配度,由此提升中小企业景气指数。特别地,数字普惠金融发展对中小企业景气的提升作用具有“均衡器效应”,景气状况较差的中小企业能够从中获益更多。为此,应当持续推动数字普惠金融发展,借助其抑制金融资源错配功能,破解中小微企业融资约束,提升其发展中的景气度。

Conditioned medium from human dental pulp stem cells treats spinal cord injury by inhibiting microglial pyroptosis

Human dental pulp stem cell transplantation has been shown to be an effective therapeutic strategy for spinal cord injury.However,whether the human dental pulp stem cell secretome can contribute to functional recovery after spinal cord injury remains unclear.In the present study,we established a rat model of spinal cord injury based on impact injury from a dropped weight and then intraperitoneally injected the rats with conditioned medium from human dental pulp stem cells.We found that the conditioned medium effectively promoted the recovery of sensory and motor functions in rats with spinal cord injury,decreased expression of the microglial pyroptosis markers NLRP3,GSDMD,caspase-1,and interleukin-1β,promoted axonal and myelin regeneration,and inhibited the formation of glial scars.In addition,in a lipopolysaccharide-induced BV2 microglia model,conditioned medium from human dental pulp stem cells protected cells from pyroptosis by inhibiting the NLRP3/caspase-1/interleukin-1βpathway.These results indicate that conditioned medium from human dental pulp stem cells can reduce microglial pyroptosis by inhibiting the NLRP3/caspase-1/interleukin-1βpathway,thereby promoting the recovery of neurological function after spinal cord injury.Therefore,conditioned medium from human dental pulp stem cells may become an alternative therapy for spinal cord injury.

Influence of variable viscosity and double diffusion on the convective stability of a nanofluid flow in an inclined porous channel

The influence of variable viscosity and double diffusion on the convective stability of a nanofluid flow in an inclined porous channel is investigated.The DarcyBrinkman model is used to characterize the fluid flow dynamics in porous materials.The analytical solutions are obtained for the unidirectional and completely developed flow.Based on a normal mode analysis,the generalized eigenvalue problem under a perturbed state is solved.The eigenvalue problem is then solved by the spectral method.Finally,the critical Rayleigh number with the corresponding wavenumber is evaluated at the assigned values of the other flow-governing parameters.The results show that increasing the Darcy number,the Lewis number,the Dufour parameter,or the Soret parameter increases the stability of the system,whereas increasing the inclination angle of the channel destabilizes the flow.Besides,the flow is the most unstable when the channel is vertically oriented.

Therapeutic advances in neural regeneration for Huntington’s disease

Huntington’s disease is a neurodegenerative disease caused by the expansion mutation of a cytosine-adenine-guanine triplet in the exon 1 of the HTT gene which is responsible for the production of the huntingtin (Htt) protein. In physiological conditions, Htt is involved in many cellular processes such as cell signaling, transcriptional regulation, energy metabolism regulation, DNA maintenance, axonal trafficking, and antiapoptotic activity. When the genetic alteration is present, the production of a mutant version of Htt (mHtt) occurs, which is characterized by a plethora of pathogenic activities that, finally, lead to cell death. Among all the cells in which mHtt exerts its dangerous activity, the GABAergic Medium Spiny Neurons seem to be the most affected by the mHtt-induced excitotoxicity both in the cortex and in the striatum. However, as the neurodegeneration proceeds ahead the neuronal loss grows also in other brain areas such as the cerebellum, hypothalamus, thalamus, subthalamic nucleus, globus pallidus, and substantia nigra, determining the variety of symptoms that characterize Huntington’s disease. From a clinical point of view, Huntington’s disease is characterized by a wide spectrum of symptoms spanning from motor impairment to cognitive disorders and dementia. Huntington’s disease shows a prevalence of around 3.92 cases every 100,000 worldwide and an incidence of 0.48 new cases every 100,000/year. To date, there is no available cure for Huntington’s disease. Several treatments have been developed so far, aiming to reduce the severity of one or more symptoms to slow down the inexorable decline caused by the disease. In this context, the search for reliable strategies to target the different aspects of Huntington’s disease become of the utmost interest. In recent years, a variety of studies demonstrated the detrimental role of neuronal loss in Huntington’s disease condition highlighting how the replacement of lost cells would be a reasonable strategy to overcome the neurodegeneration. In this view, numerous have been the attempts in several preclinical models of Huntington’s disease to evaluate the feasibility of invasive and non-invasive approaches. Thus, the aim of this review is to offer an overview of the most appealing approaches spanning from stem cell-based cell therapy to extracellular vesicles such as exosomes in light of promoting neurogenesis, discussing the results obtained so far, their limits and the future perspectives regarding the neural regeneration in the context of Huntington’s disease.

Prediction of subsurface settlement induced by shield tunnelling in sandy cobble stratum

This study focuses on the analytical prediction of subsurface settlement induced by shield tunnelling in sandy cobble stratum considering the volumetric deformation modes of the soil above the tunnel crown.A series of numerical analyses is performed to examine the effects of cover depth ratio(C/D),tunnel volume loss rate(h t)and volumetric block proportion(VBP)on the characteristics of subsurface settle-ment trough and soil volume loss.Considering the ground loss variation with depth,three modes are deduced from the volumetric deformation responses of the soil above the tunnel crown.Then,analytical solutions to predict subsurface settlement for each mode are presented using stochastic medium theory.The influences of C/D,h t and VBP on the key parameters(i.e.B and N)in the analytical expressions are discussed to determine the fitting formulae of B and N.Finally,the proposed analytical solutions are validated by the comparisons with the results of model test and numerical simulation.Results show that the fitting formulae provide a convenient and reliable way to evaluate the key parameters.Besides,the analytical solutions are reasonable and available in predicting the subsurface settlement induced by shield tunnelling in sandy cobble stratum.

Some studies on mechanics of continuous mediums viewed as differential manifolds

The continuous mediums are divided into two kinds according to their geometrical configurations,the first one is related to Euclidian manifolds and the other one to Riemannian manifolds/surfaces in the point of view of the modern geometry.Two kinds of finite deformation theories with respect to Euclidian and Riemannian manifolds have been developed in the present paper.Both kinds of theories include the definitions of initial and current physical and parametric configurations,deformation gradient tensors with properties,deformation descriptions,transport theories and governing equations of nature conservation laws.The essential property of the theory with respect to Euclidian manifolds is that the curvilinear coordinates corresponding to the current physical configurations include time explicitly through which the geometrically irregular and time varying physical configurations can be mapped in the diffeomorphism manner to the regular and fixed domains in the parametric space.It is quite essential to the study of the relationships between geometries and mechanics.The theory with respect to Riemannian manifolds provides the systemic ideas and methods to study the deformations of continuous mediums whose geometrical configurations can be considered as general surfaces.The essential property of the theory with respect to Riemannian manifolds is that the thickness variation of a patch of continuous medium is represented by the surface density and its governing equation is rigorously deduced.As some applications,wakes of cylinders with deformable boundaries on the plane,incompressible wakes of a circular cylinder on fixed surfaces and axisymmetric finite deformations of an elastic membrane are numerically studied.

Preparation of FeCoNi medium entropy alloy from Fe^(3+)-Co^(2+)-Ni^(2+)solution system

In recent years,medium entropy alloys have become a research hotspot due to their excellent physical and chemical performances.By controlling reasonable elemental composition and processing parameters,the medium entropy alloys can exhibit similar properties to high entropy alloys and have lower costs.In this paper,a FeCoNi medium entropy alloy precursor was prepared via sol-gel and coprecipitation methods,respectively,and FeCoNi medium entropy alloys were prepared by carbothermal and hydrogen reduction.The phases and magnetic properties of FeCoNi medium entropy alloy were investigated.Results showed that FeCoNi medium entropy alloy was produced by carbothermal and hydrogen reduction at 1500℃.Some carbon was detected in the FeCoNi medium entropy alloy prepared by carbothermal reduction.The alloy prepared by hydrogen reduction was uniform and showed a relatively high purity.Moreover,the hydrogen reduction product exhibited better saturation magnetization and lower coercivity.

揭示氨对正己酸生产影响的机制——影响途径、关键酶和微生物

n-Caproate,which is produced via chain elongation(CE)using waste biomass,can supply various fossilderived products,thus advancing the realization of carbon neutrality.Ammonia released from the degradation of nitrogen-rich waste biomass can act as a nutrient or an inhibitor in anaerobic bioprocesses,including CE,with the distinction being primarily dependent on its concentration.Currently,the optimal concentration of ammonia and the threshold of toxicity for open-culture n-caproate production using ethanol as an electron donor,along with the underlying mechanisms,remain unclear.This study revealed that the optimal concentration of ammonia for n-caproate production was 2.0 g∙L^(-1),whereas concentrations exceeding this threshold markedly suppressed the CE performance.Exploration of the mechanism revealed the involvement of two forms of ammonia(i.e.,ammonium ions and free ammonia)in this inhibitory behavior.High ammonia levels(5.0 g∙L^(-1))induced excessive ethanol oxidation and suppressed the reverse β-oxidation(RBO)process,directly leading to the enhanced activities of enzymes(phosphotransacetylase and acetate kinase)responsible for acetate formation and diminished activities of butyryl-coenzyme A(CoA):acetyl-CoA transferase,caproyl-CoA:butyryl-CoA transferase,and caproyl-CoA:acetyl-CoA transferase that are involved in the syntheses of n-butyrate and n-caproate.Furthermore,the composition of the microbial community shifted from Paraclostridium dominance(at 0.1 g∙L^(-1)ammonia)to a co-dominance of Fermentimonas,Clostridium sensu stricto 12,and Clostridium sensu stricto 15 at 2.0 g∙L^(-1)ammonia.However,these CE-functional bacteria were mostly absent in the presence of excessive ammonia(5.0 g∙L^(-1)ammonia).Metagenomic analysis revealed the upregulation of functions such as RBO,fatty acid synthesis,K^(+)efflux,adenosine triphosphatase(ATPase)metabolism,and metal cation export in the presence of 2.0 g∙L^(-1)ammonia,collectively contributing to enhanced n-caproate production.Conversely,the aforementioned functions(excluding metal cation export)and K^(+)influx were suppressed by excessive ammonia,undermining both ammonia detoxification and n-caproate biosynthesis.The comprehensive elucidation of ammonia-driven mechanisms influencing n-caproate production,as provided in this study,is expected to inspire researchers to devise effective strategies to alleviate ammonia-induced inhibition.

Review on the plastic instability of medium -Mn steels for identifying the formation mechanisms of Lüders and Portevin -Le Chatelier bands

Plastic instability,including both the discontinuous yielding and stress serrations,has been frequently observed during the tensile deformation of medium-Mn steels(MMnS)and has been intensively studied in recent years.Unfortunately,research results are controversial,and no consensus has been achieved regarding the topic.Here,we first summarize all the possible factors that affect the yielding and flow stress serrations in MMnS,including the morphology and stability of austenite,the feature of the phase interface,and the deformation parameters.Then,we propose a universal mechanism to explain the conflicting experimental results.We conclude that the discontinuous yielding can be attributed to the lack of mobile dislocation before deformation and the rapid dislocation multiplication at the beginning of plastic deformation.Meanwhile,the results show that the stress serrations are formed due to the pinning and depinning between dislocations and interstitial atoms in austenite.Strain-induced martensitic transformation,influenced by the mechanical stability of austenite grain and deformation parameters,should not be the intrinsic cause of plastic instability.However,it can intensify or weaken the discontinuous yielding and the stress serrations by affecting the mobility and density of dislocations,as well as the interaction between the interstitial atoms and dislocations in austenite grains.

Micromechanism and mathematical model of stress sensitivity in tight reservoirs of binary granular medium

Research on reservoir rock stress sensitivity has traditionally focused on unary granular structures,neglecting the binary nature of real reservoirs,especially tight reservoirs.Understanding the stresssensitive behavior and mathematical characterization of binary granular media remains a challenging task.In this study,we conducted online-NMR experiments to investigate the permeability and porosity evolution as well as stress-sensitive control mechanisms in tight sandy conglomerate samples.The results revealed stress sensitivity coefficients between 0.042 and 0.098 and permeability damage rates ranging from 65.6%to 90.9%,with an average pore compression coefficient of 0.0168—0.0208 MPa 1.Pore-scale compression occurred in three stages:filling,compression,and compaction,with matrix pores playing a dominant role in pore compression.The stress sensitivity of binary granular media was found to be influenced by the support structure and particle properties.High stress sensitivity was associated with small fine particle size,high fines content,high uniformity coefficient of particle size,high plastic deformation,and low Young's modulus.Matrix-supported samples exhibited a high irreversible permeability damage rate(average=74.2%)and stress sensitivity coefficients(average=0.089),with pore spaces more slit-like.In contrast,grain-supported samples showed low stress sensitivity coefficients(average=0.021)at high stress stages.Based on the experiments,we developed a mathematical model for stress sensitivity in binary granular media,considering binary granular properties and nested interactions using Hertz contact deformation and Poiseuille theory.By describing the change in activity content of fines under stress,we characterized the non-stationary state of compressive deformation in the binary granular structure and classified the reservoir into three categories.The model was applied for production prediction using actual data from the Mahu reservoir in China,showing that the energy retention rates of support-dominated,fill-dominated,and matrix-controlled reservoirs should be higher than 70.1%,88%,and 90.2%,respectively.

Imaging through scattering layers using a near-infrared low-spatial-coherence fiber random laser

Optical memory effect-based speckle-correlated technology has been developed for reconstructing hidden objectsfrom disordered speckle patterns,achieving imaging through scattering layers.However,the lighting efficiency and fieldof view of existing speckle-correlated imaging systems are limited.Here,a near-infrared low spatial coherence fiberrandom laser illumination method is proposed to address the above limitations.Through the utilization of random Rayleighscattering within dispersion-shifted fibers to provide feedback,coupled with stimulated Raman scattering for amplification,a near-infrared fiber random laser exhibiting a high spectral density and extremely low spatial coherence is generated.Based on the designed fiber random laser,speckle-correlated imaging through scattering layers is achieved,with highlighting efficiency and a large imaging field of view.This work improves the performance of speckle-correlated imagingand enriches the research on imaging through scattering medium.

Fiber Bundle Topology Optimization for Surface Flows

This paper presents a topology optimization approach for the surface flows on variable design domains.Via this approach,the matching between the pattern of a surface flow and the 2-manifold used to define the pattern can be optimized,where the 2-manifold is implicitly defined on another fixed 2-manifold named as the base manifold.The fiber bundle topology optimization approach is developed based on the description of the topological structure of the surface flow by using the differential geometry concept of the fiber bundle.The material distribution method is used to achieve the evolution of the pattern of the surface flow.The evolution of the implicit 2-manifold is realized via a homeomorphous map.The design variable of the pattern of the surface flow and that of the implicit 2-manifold are regularized by two sequentially implemented surface-PDE filters.The two surface-PDE filters are coupled,because they are defined on the implicit 2-manifold and base manifold,respectively.The surface Navier-Stokes equations,defined on the implicit 2-manifold,are used to describe the surface flow.The fiber bundle topology optimization problem is analyzed using the continuous adjoint method implemented on the first-order Sobolev space.Several numerical examples have been provided to demonstrate this approach,where the combination of the viscous dissipation and pressure drop is used as the design objective.

Cosmic Ray-driven Bioenergetics for Life in Molecular Clouds

According to models such as panspermia or the Nebula-Relay hypothesis,the ancestors of life on Earth once lived in molecular clouds.Then what are the energy source and bioenergetics for such lifeforms?A new bioenergetic mechanism powered by cosmic ray ionization of hydrogen molecules is proposed and its relation with the origin of chemiosmosis is also discussed in this paper.Based on this mechanism,the Last Universal Common Ancestor may be a type of lifeform that utilizes hydrogen molecules as donors of electron transport chains.