An efficient and mild recycling of waste melamine formaldehyde foams by alkaline hydrolysis

Melamine formaldehyde foam(MFF)generates many poisonous chemicals through the traditional recycling methods for organic resin wastes.Herein,a high MFF degradation ratio of ca.97 wt.%was achieved under the mild conditions(160℃)in a NaOH–H2O system with ammelide and ammeline as the main degradation products.The alkaline solvent had an obvious corrosion effect for MFF,as indicated by scanning electron microscopy(SEM).The reaction process and products distribution were studied by Fourier-transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS),and ^(13)C nuclear magnetic resonance(NMR).Besides,the MFF degradation products that have the similar chemical structures and bonding performances to those of melamine can be directly used as the raw material for synthesis of melamine urea-formaldehyde resins(MUFs).Moreover,the degradation system demonstrated here showed the high degradation efficiency after reusing for 7 times.The degradation process generated few harmful pollutants and no pre-or post-treatments were required,which proves its feasibility in the safe removal or recovery of waste MFF.

NiCoZn/C@melamine sponge-derived carbon composites with highperformance electromagnetic wave absorption

NiMZn/C@melamine sponge-derived carbon(MSDC)composites(M=Co,Fe,and Mn)were prepared by a vacuum pump-ing solution method followed by carbonization.A large number of carbon nanotubes(CNTs)homogeneously attached to the surfaces of the three-dimensional cross-linked of the sponge-derived carbon in the NiCoZn/C@MSDC composite,and CNTs were detected in the NiFeZn/C@MSDC and NiMnZn/C@MSDC composites.Ni_(3)ZnC_(0.7),Ni_(3)Fe,and MnO in-situ formed in the NiFeZn/C@MSDC and NiMnZn/C@MSDC composites.The CNTs in the NiCoZn/C@MSDC composite efficiently modulated its complex permittivity.Thus,the composite exhibited the best performance among the composites,with the minimum reflection loss(RL_(min))of-33.1 dB at 18 GHz and thickness of 1.4 mm.The bandwidth for RL of≤-10 dB was up to 5.04 GHz at the thickness of 1.7 mm and loading of 25wt%.The op-timized impedance matching,enhanced interfacial and dipole polarization,remarkable conduction loss,and multiple reflections and scat-tering of the incident microwaves improved the microwave absorption performance.The effects of Co,Ni,and Fe on the phase and mor-phology provided an alternative way for developing highly efficient and broadband microwave absorbers.

Ultrahydrophobic melamine sponge via interfacial modification with reduced graphene oxide/titanium dioxide nanocomposite and polydimethylsiloxane for oily wastewater treatment

Three-dimensional(3D)porous absorbents have attracted significant attention in the oily wastewater treatment technology due to their high porosity and elasticity.Given their amphiphilic surface,they have a propensity to simultaneously absorb water and oil,which restricts their range of applications.In this study,a reduced graphene oxide and titanium dioxide nanocomposite(rGO/TiO_(2))was used to fabricate an ultra-hydrophobic melamine sponge(MS)through interfacial modification using a solution immersion technique.To further modify it,poly-dimethylsiloxane(PDMS)was grafted onto its surface to establish stronger covalent bonds with the composite.The water contact angle of the sponge(rGO/TiO_(2)/PDMS/MS)was 164.2°,which satisfies the condition for ultrahydrophobicity.The evidence of its water repellency was demonstrated by the Cassie-Baxter theory and the lotus leaf effect.As a result of the increased density of rGO/TiO_(2)/PDMS/MS,it recorded an initial capacity that was 2 g/g lower than the raw MS for crude oil absorption.The raw MS retained 53% of its initial absorption capacity after 20 cycles of absorption,while rGO/TiO_(2)/PDMS/MS retained 97%,suggesting good recyclability.Excellent oil and organic solvent recovery(90%-96%)was demonstrated by rGO/TiO_(2)/PDMS/MS in oil-water combinations.In a continuous separation system,it achieved a remarkable separation efficiency of 2.4×10^(6)L/(m^(3)·h),and in turbulent emulsion separation,it achieved a demulsification efficiency of 90%-91%.This study provides a practical substitute for massive oil spill cleaning.

Facile SERS screening of melamine in bovine milk with 2D printed AgNPs/glass fabric filter paper as the flexible substrate

Melamine is one of the most frequently detected adulterants in dairy products.The current study proposes a surface-enhanced Raman spectroscopy(SERS)-based analytical tool for fast and reliable screening of melamine in bovine milk.A hand-held Raman spectrometer was used in conjunction with a substrate composed of silver nanoparticles(AgNPs)that was 2D printed onto glass fiber(GF)filter paper.Under optimized conditions,a sensitive and fingerprint-like signal at 674 cm^(-1) was obtained.The AgNPs/GF substrate exhibited high sensitivity to melamine in milk down to 1.9498×10^(-5)mg/mL,which is well below the USA and EU safety limits(2.5×10^(-3)mg/mL).Remarkably,the proposed technology was also highly reproducible,showing spot-to-spot and block-to-block variations below 3.3%and 4.9%at 674 cm^(-1) in Raman intensity,respectively.The characteristic peak intensity and concentration of melamine showed an acceptable linear relationship(R^(2)=0.9909)within the range of 0.0001-1 mg/mL.Overall,the method established in this study can provide an efficient and effective method for the quantitative target screening and detection of melamine in dairy products.

Characterization of Flame Retardancy and Oil-Water Separation Capacity of Superhydrophobic Silylated Melamine Sponges

A silylated melamine sponge(SMS)was prepared by two simple steps,namely,immersion and dehydration of a melamine sponge coated with methyltrichlorosilane.The silylated structure of SMS was characterized by FT-IR(Fourier-transform infrared)spectroscopy,SEM(Scanning electron microscopy)and in terms of water contact angles.Its oil-water absorption and separation capacities were measured by FT-IR and UV-visible spectrophoto-metry.The experimental results have shown that oligomeric silanol covalently bonds by Si-N onto the surface of melamine sponge skeletons.SMS has shown superhydrophobicity with a water contact angle exceeding 150°±1°,a better separation efficiency with regard to diesel oil(by 99.31%(wt/wt%)in oil-water mixture and even up to 99.99%(wt/wt%)for diesel oil in its saturated aqueous solution.Moreover,SMS inherited the intrinsicflame retardancy of the melamine sponge.In general,SMS has shown superhydrophobicity,high porosity,excellent selectivity,remarkable recyclability,and better absorption capacity for various oils and organic solvents,and a high separation efficiency for oil in saturated aqueous solutions.

Determination of Melamine by Infrared Spectroscopy Based on Nonlinear Modeling

[Objective] The aim was to develop a nonlinear model of quantitative analysis of melamine content by infrared spectroscopy and provide theoretical basis for the nondestructive detection of melamine. [Method] According to dynamics,mathematical modeling and optimization theory,linear and nonlinear models were respectively set up by taking an absorption peak of 1 550 cm-1 as characteristic absorption peak. [Result] The correlation coefficient of nonlinear model was 0.922 7 and the recovery was 96%,which showed that the nonlinear model was more accurate than linearity model with correlation coefficient of 0.904 9 and recovery of 557%. [Conclusion] It is feasible to determine melamine content by using the nonlinear model quantitatively.

基于Mel声谱图与改进SEResNet的鱼类行为识别

养殖环境中饲料投放、水流变化等刺激源导致鱼类声音分辨难,使行为识别准确率不高,为解决上述问题,提出基于Mel声谱图(Mel spectrogram)与改进SEResNet的鱼类行为识别模型TAP-SEResNet。首先针对鱼类行为声音频率波动大、特征差异小,造成特征提取难的问题,采用高分辨率、特征表示较好的Mel声谱图以捕捉鱼类声音的频谱特征。其次针对鱼类声音特征关键信息易丢失的难题,提出在SEResNet模型中融合时序聚合池化层(Temporal Aggregated Pooling,TAP),提取池化区域的最大值和平均值,保留鱼类行为更多细粒度声音特征,提高识别准确率。为验证所提模型的有效性,分别设计了消融试验和模型性能对比试验,试验结果显示:TAP-SEResNet相比SEResNet在不降低检测速度的条件下准确率提升了3.23%;相比PANNS-CNN14、ECAPA-TDNN及MFCC+ResNet等先进声音识别模型,TAP-SEResNet在准确率上分别提升了5.32%、2.80%和1.64%。所提模型有助于养殖过程中对鱼类行为实现精准监测,对精准养殖具有重要的推动作用。

Simultaneous Determination of Melamine, Ammelide, Ammeline, and Cyanuric Acid in Milk and Milk Products by Gas Chromatography-tandem Mass Spectrometry

Objective To develop an analytical method for simultaneously qualitative and quantitative determination of melamine and triazine-related by-products including ammelide, ammeline, and cyanuric acid in milk and milk products by gas chromatography- tandem mass spectrometry （GC-MS/MS）. Methods Melamine and triazine-related by-products namely ammelide, ammeline and cyanuric acid in the samples were extracted in a solvent mixture of diethylamine, water, and acetonitrile （10：40：50, V/V/V）. After centrifugation, an aliquot of the supernatant was evaporated to dryness under a gentle stream of nitrogen gas, and then melamine and triazine-related by-products were derivatized using BSTFA with 1% TMCS. The derivatives of melamine and its analogues were determined by gas chromatography/tandem mass spectrometry using multiple reactional monitoring （MRM） with 2, 6-Diamino-4-chloropyrimidine （DACP） being used as an internal standard. Results The linear detectable ranges were from 0.004 mg/kg to 1.6 mg/kg for melamine, ammelide, ammeline, and cyanuric acid with a correlation coefficient no less than 0.999. The recovery rates of the tour compounds in spiked blank milk powder at concentrations 0.5, 1, 2 mg/kg were between 61.4%-117.2%, and the relative standard deviation was no more than 11.5% （n=6）. The detection limits of melamine, ammelide, ammeline and cyanuric acid in milk powder were 0.002 mg/kg with a ratio of signal to noise of 3. Conclusion This GC-MS/MS method for simultaneous determination of melamine, ammelide, ammeline, and cyanuric acid in milk and milk products is sensitive and specific.

A Survey on Occurrence of Melamine and Its Analogues in Tainted Infant Formula in China

Objective To investigate the occurrence and concentrations of melamine and its analogues in tainted infant formula and to identify the etiologic factors for the urinary stones epidemic in infants and young children in China in 2008. Methods Sanlu infant formula samples were collected from families of the affected children in Gansu province, and markets in Gansu and Hebei provinces and Beijing city. Melamine and its analogues, including cyanuric acid, ammeline, and ammelide were measured by gas chromatography/tandem mass spectrometry. Results High prevalence and concentrations of melamine were found in Sanlu infant formula samples, with low concentrations of cyanuric acid, ammeline and ammelide. Melamine were detected in 87 out of 111 Sanlu infant formula samples with a range of 118 to 4 700 mg/kg, Conclusion The results provide strong evidence for melamine as the etiological factor for the urinary stones epidemic in infants and young children in China in 2008.

Flame retardant polyamide 6 by in situ polymerization of ε-caprolactam in the presence of melamine derivatives

An improved method for preparing melamine cyanurate （MCA） based flame retardant polyamide 6 （FRPA6） materials has been proposed. This processing method, i.e., improved in situ polymerization, was used to synthesize flame retardant PA6. In situ formed MCA nanoparticles were supposed to be linked to PA6 chains in the ε-caprolactam hydrolytic polymerization system to obtain startype polymers for the first time. Through TEM photographs, it can be found that the in situ formed MCA nanoparticles with diametric size of less than 50 nm, are nanoscaled, highly uniformly dispersed in the PA6 matrix. Synthesized flame retardant PA6 have good fire performance which can achieve UL-94 V-0 rating at 1.6 mm thickness with the presence of 7.34 wt.% MCA in the matrix.

Study on Migration of Melamine from Food Packaging Materials on Markets

Objectives To study the migration of melamine into foods from plastic food packaging materials and dairy product containers commonly used in China. Methods 37 samples were collected from the market. The EU migration testing conditions were adopted with distilled water, 3% acetic acid, n-hexane and 15% ethanol being chosen as the simulating solutions. The HPLC method was used to detect melamine. Results No melamine was detected in 15 dairy product containers. Among the 22 plastic samples, 16 of polypropylene, and polycarbonate types had no detectable amount melamine while a low level of melamine was found in 3 of the 6 melamine resin containers. Conclusion Migration of melamine from food packaging materials in China market is in line with the requirements of EU.

Melamine modified carbon felts anode with enhanced electrogenesis capacity toward microbial fuel cells

Surface electropositivity and low internal resistance are important factors to improve the anode performance in microbial fuel cells (MFCs). Nitrogen doping is an effective way for the modification of traditional carbon materials. In this work, heat treatment and melamine were used to modify carbon felts to enhance electrogenesis capacity of MFCs. The modified carbon felts were characterized using X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), atomic force microscopy (AFM) and malvern zeta potentiometer. Results show that the maximum power densities under heat treatment increase from 276.1 to 423.4 mW/m(2) (700 degrees C) and 461.5 mW/m(2) (1200 degrees C) and further increase to 472.5 mW/m(2) (700 degrees C) and 515.4 mW/m(2) (1200 degrees C) with the co-carbonization modification of melamine. The heat treatment reduces the material resistivity, improves the zeta potential which is beneficial to microbial adsorption and electron transfer. The addition of melamine leads to the higher content of surface pyridinic and quaternary nitrogen and higher zeta potential. It is related to higher MFCs performance. Generally, the melamine modification at high temperature increases the feasibility of carbon felt as MFCs's anode materials. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Preparation and characterization of hexadecane microcapsule with polyurea-melamine formaldehyde resin shell materials

This paper gives a brief report of the preparation of hexadecane microcapsule with polyurea-melamine formaldehyde resin shell materials(HMPM).The sealing performance and thermal stability of HMPM was enhanced much more effectively than that of microcapsule with polyurea shell material(HPM).The results of microscopical imaging analysis system,DSC,TG,and laser particle analyzer were briefly introduced.

Synthesis of melamine-formaldehyde microcapsules containing oil-based fragrances via intermediate polyacrylate bridging layers

A general and versatile strategy to prepare melamine-formaldehyde(MF)microcapsules encapsulating oil-based fragrances by combining solvent evaporation and in situ polymerization was proposed in this work.The oil-based fragrance was pre-encapsulated by an inner polyacrylate membrane via solvent evaporation,followed by in situ polymerization of MF precondensates as an outer shell.The polyacrylate membrane is used as an intermediate bridging layer to stabilize the oil-based fragrance,and to provide driving forces for in situ polymerization of MF precondensates through electrostatic attractions between carboxyl groups and ammonium ions.It was demonstrated that MF microcapsules containing clove oil were prepared successfully.The amount and the composition of the intermediate polyacrylate bridging layer were critical.Smooth and sphere-shaped MF-clove oil microcapsules were prepared when the weight ratio of polyacrylate to clove oil was over 60 wt%and the concentration of acrylic acid(AA)increased to 10 wt%in polyacrylate.In addition,MF microcapsules containing sunflower oil and hexyl salicylate were prepared by using this method.The work suggests that this new approach can be potentially used to encapsulate various core materials,tuning the shell properties of microcapsules such as thickness,mechanical strength and release properties.

Tailoring the Self-assembly of Melamine on Au（111） via Doping with Cu Atoms

The doping effect of Cu on the self-assembly film of melamine on an Au（111） surface has been investigated with scanning tunneling microscopy （STM）. The evaporated Cu adatoms occupy the positions underneath the amino groups and change the hydrogen bonding pat- tern between the melamine molecules. Accordingly, the self-assembly structure has changed stepwise from a well-defined honeycomb into a track-like and then a triangular structure depending on the amount of Cu adatoms. The interaction between Cu adatom and melamine is moderate thus the Cu adatoms can be released upon mild heating to around 100 ℃. These findings are different from previous observations of either the coordination assembly or the physically trapped metal adatoms.

基于Mel-GADF与ConvNeXt-T的变压器铁心松动故障诊断方法

为解决传统梅尔(Mel)时频谱图对变压器铁心松动程度识别率较低的问题,提出一种基于梅尔-格拉姆角差场(Mel-GADF)时频谱图与ConvNeXt-T网络相结合的变压器铁心松动故障诊断模型。将变压器声纹信号生成Mel时频谱图,同时将原始声纹数据经过格拉姆角场(GAF)变换得到格拉姆角和场(GASF)与GADF这2种时频谱图;生成Mel-GASF与Mel-GADF这2种特征融合的时频谱图来弥补Mel时频谱图的低频缺失问题;将3种时频谱图放入ConvNeXt-T网络进行训练对比,选出效果最佳的诊断模型。以型号为S13-M-200/10的变压器为对象进行空载试验,对不同铁心松动程度下的声纹信号进行分析,分析结果表明,将Mel-GADF作为特征时频谱图结合ConvNeXt-T网络,可将测试集准确率从传统Mel时频谱图的98.273%提升至99.500%,提升了1.227个百分点。

Chemiluminescence determination of melamine with Luminol-K_3Fe(CN)_6 system

A sensitive chemiluminescence（CL） method was developed for determining melamine in urine and plasma samples based on the fact that melamine can remarkably enhance the chemiluminescence of Luminol-K3 Fe（CN）6 system in alkaline medium. The determination conditions were optimized. Under optimum conditions, the chemiluminescence intensity had a good linear relationship with melamine in the range of 9.0 × 10^-9 - 7.0 × 10^-6 g/mL with a correlation coefficient of 0. 9992. The detection limits （3o） were 3.54 ng/mL for urine sample and 6.58 ng/mL for plasma sample. The average recoveries of melamine were 102.6% for urine sample and 95.1% for plasma sample. Melamine in samples was extracted with liquid-liquid extraction procedures and the assay results coincided very well with that determined with flow injection chemiluminescence method. The method provides a reproducible and stable approach for sensitive detection and quantification of melamine in urine and plasma samples.

Ni Flower/MXene-Melamine Foam Derived 3D Magnetic/Conductive Networks for Ultra-Efficient Microwave Absorption and Infrared Stealth

The development of multifunctional and efficient electromagnetic wave absorbing materials is a challenging research hotspot.Here,the magnetized Ni flower/MXene hybrids are successfully assembled on the surface of melamine foam(MF)through electrostatic self-assembly and dip-coating adsorption process,realizing the integration of microwave absorption,infrared stealth,and flame retardant.Remarkably,the Ni/MXene-MF achieves a minimum reflection loss(RLmin)of−62.7 dB with a corresponding effective absorption bandwidth(EAB)of 6.24 GHz at 2 mm and an EAB of 6.88 GHz at 1.8 mm.Strong electromagnetic wave absorption is attributed to the three-dimensional magnetic/conductive networks,which provided excellent impedance matching,dielectric loss,magnetic loss,interface polarization,and multiple attenuations.In addition,the Ni/MXene-MF endows low density,excellent heat insulation,infrared stealth,and flame-retardant functions.This work provided a new development strategy for the design of multifunctional and efficient electromagnetic wave absorbing materials.

Assessment on Dietary Melamine Exposure from Tainted Infant Formula

Objective To estimate the dietary melamine exposure in Chinese infants and young children from the consumption of melamine adulterated Sanlu infant formula. Methods Four age groups of infants and young children （3, 6, 12, and 24 months） were chosen as the assessed subjects and the maximum amount of infant formula consumption was estimated based on the recommended usage level in the package insert of Sanlu infant formula and other brands. Melamine was analyzed in 111 Sanlu infant fbrmula samples collected from the markets in Beijing and Gansu province using the LC-MS-MS with a limit of quantification of 0.05 mg/kg. Four levels of melamine concentration were chosen to estimate the dietary intakes, including the mean, median, 90th percentile, and maximum. Results The infants of 3 months had the highest intake of melamine, and with the increase of the age （inonth）, the intake decreased. Based on the median melamine concentration （1 000 mg/kg） as an example, the melamine intakes fur the infants of 3, 6, 12, and 24 months were 23.4, 21.4, 15.0, and 8.6 mg/kg bw/d, respectively. Conclusion Dietary melamine intakes from tainted Sanln infant formula significantly exceeded the TDI level （0.2 mg/kg bw/d） recommended by the WHO Expert Meeting in 2008. However, the present assessment has some limitations including the poor representative samples, the varied melamine concentrations in the adulterated Sanlu infant formula, and other brand infant formula possibly consumed by these infants.

Preparation and Property Analysis of Melamine Formaldehyde Foam

Melamine formaldehyde (MF) foam is kind of fire-retardant material and has great potential in acoustic and thermal insulation area. In this article, MF resin foam was prepared by microwave radiation. We discussed the thermal stability of MF foam and the effect of different emulsifiers on its morphology, apparent density, fire-retardancy and mechanical property. The decomposition temperature of MF foam we prepared is nearly 400℃ and the constitution of residue after combustion is made up of carbon and graphite. Emulsifier influenced the apparent density of MF foam and using coemulsifiers can get flexible foam with uniform cell size, good morphology and low apparent density. When the fire-retardant MF foam’s apparent density is low of 5.53 kg/cm-3, its value of LOI can reach 32.4. The mechanical property of foam is consistent with apparent density.