In this study,to efficiently remove Pb(Ⅱ) from aqueous environments,a novel L-serine-modified polyethylene/polypropylene nonwoven fabric sorbent(NWF-serine)was fabricated through the radiation grafting of glycidyl me...In this study,to efficiently remove Pb(Ⅱ) from aqueous environments,a novel L-serine-modified polyethylene/polypropylene nonwoven fabric sorbent(NWF-serine)was fabricated through the radiation grafting of glycidyl methacrylate and subsequent L-serine modification.The effect of the absorbed dose was investigated in the range of 5–50 kGy.NWF-serine was characterized by Fourier transform infrared spectroscopy,thermogravimetric analysis,and scanning electron microscopy.Batch adsorption tests were conducted to investigate the influences of pH,adsorption time,temperature,initial concentration,and sorbent dosage on the Pb(Ⅱ) adsorption performance of NWF-serine.The results indicated that Pb(Ⅱ) adsorption onto NWF-serine was an endothermic process,following the pseudo-second-order kinetic model and Langmuir isotherm model.The saturated adsorption capacity was 198.1 mg/g.NWF-serine exhibited Pb(Ⅱ) removal rates of 99.8% for aqueous solutions with initial concentrations of 100 mg/L and 82.1% for landfill leachate containing competitive metal ions such as Cd,Cu,Ni,Mn,and Zn.Furthermore,NWF-serine maintained 86% of its Pb(Ⅱ) uptake after five use cycles.The coordination of the carboxyl and amino groups with Pb(Ⅱ) was confirmed using X-ray photoelectron spectroscopy and extended X-ray absorption fine structure analysis.展开更多
The monomer methacrylamido propyl trimethy ammonium chloride( MAPTAC) was copolymerized onto the fiber surface of polypropylene( PP) nonwoven fabric under ultroviole radiation. The weak acid red GN dye adsorption and ...The monomer methacrylamido propyl trimethy ammonium chloride( MAPTAC) was copolymerized onto the fiber surface of polypropylene( PP) nonwoven fabric under ultroviole radiation. The weak acid red GN dye adsorption and adsorptive filtration performance of the resulted PP fabrics were investigated.The results showed that the grafting copolymerization preferred to happen in the inner layer of the fabrics. The water flux of the grafted fabrics decreases with the increase of grafting yield. The collapse of the grafted polymer chains causes the flux increase in acidic condition,or vice versa at alkaline version. The coiling of the polyelectrolyte chains upon the dye adsorption seems to violate the routine assumption of the rigid substrate, and this gets the adsorption energy constant negative. The static adsorption process follows the Lagergren's pseudo-second order kinetic equation. The removals of circa( ca.) 100% of the total permeation volume3 500 mL simulated dye wastewater was reached during permeation.The dye adsorbed fabrics were regenerated by the mixed media of the cationic surfactant / ethanol /water. The grafted fabric assumes stable fabric integrity and stability during permeation,and presents excellent dye adsorption capacity,easy desorption, and repeatable utilization.展开更多
A novel antibacterial material （L-PET） was prepared by immobilizing ε-polylysine on polyethylene terephthalate （PET） nonwoven fabrics. Surface modifications of the fabric were performed by using a chemical modifi...A novel antibacterial material （L-PET） was prepared by immobilizing ε-polylysine on polyethylene terephthalate （PET） nonwoven fabrics. Surface modifications of the fabric were performed by using a chemical modification procedure where carboxyl groups were prepared on the PET surface, a coupling agent was grafted, and the ε-polylysine was immobilized. Scanning electron microscopy （SEM） was used to analyze the surface morphology of the fabrics, while the toluidine blue method and X-ray photoelectron spectroscopy （XPS） were used to evaluate the grafting densities. The antibacterial activities of the L-PET were investigated by using the shaking-flask method. The electron micrographs showed that the surface of the blank PET and the modified fabrics did not change. The results of XPS analysis confirmed that ε-polylysine was successfully grafted onto the surface of PET. The results of the antibacterial experiments showed that L-PET fabrics had excellent antibacterial activity against Escherichia coli and Staphylococcus aureus, and that L-PET fabrics were stable in storage for at least two years.展开更多
All types of surfactants (cationic, anionic and nonionic) reported in this paper could enhance the surficial wettability of polypropylene (PP) and polyethylene terephthalate (PET) nonwoven fabrics. However, the effect...All types of surfactants (cationic, anionic and nonionic) reported in this paper could enhance the surficial wettability of polypropylene (PP) and polyethylene terephthalate (PET) nonwoven fabrics. However, the effects of cationic and nonionic surfactants were better. The longer the treatment time of surfactants on the nonwoven fabrics, the better the surficial wettability. The surficial rewetting time would no longer change above a certain treatment time. The rewettability of nonwoven fabrics could be evidently improved just when the concentration of surfactants was just above the CMC, except for sodium dodecylbenzene sulfonate (LAS). The finer the fibers and the looser the structures, the better the surficial rewettability of nonwoven fabrics.展开更多
It has been found that there are marked errors in the value of valid opening size of heat-bonded nonwoven fabrics between theoretical calculations and engineering measurements. A new modified theoretical model is adva...It has been found that there are marked errors in the value of valid opening size of heat-bonded nonwoven fabrics between theoretical calculations and engineering measurements. A new modified theoretical model is advanced in this paper. The equivalent diameter of the pore of a fibre web is used to calculate the valid opening size instead of the maximum diameter of inscribed circle used, because the fibres in practical fibre webs are flexible elastomers with definite diameters and the pore of fibre web may produce deformation in screening teat and engineering usage. The results show that the theoretical calculations coincide well with the engineering measurements. This method offers a theoretical basis for computer simulation to the performance of filters of heatbonded nonwoven fabrics.展开更多
In this paper, the influence of processing parameters and powder binder content was studied and analysed on the properties of high loft nonwoven fabrics mainly using statistical analysis method. The relationship betwe...In this paper, the influence of processing parameters and powder binder content was studied and analysed on the properties of high loft nonwoven fabrics mainly using statistical analysis method. The relationship between the bulkiness and the warmth retention property was also tested. The analytical results reveal that the increase of the powder content, heating temperature and pressure will affect the tensile strength of nonwovens. Moreover, there are interactions between these parameters. The compression properties only change a little for a powder binder content of 15％—20％. However, with the increase of the heating temperature and pressure, the bulkiness and compression rate will reduce significantly. For the bulk density of high loft nonwoven fabrics, there exists a heat transter mechanism of air convection, but the higher the bulkiness of nonwovens, the larger the thickness and the better the warmth retention property of nonwoven fabrics.展开更多
In this paper, two types of high loft nonwoven fabrics have been constructed in the laboratory apparatus made by ourselves with different binders (polyamide and polyethylene powder) and varying binder contents (10%, 2...In this paper, two types of high loft nonwoven fabrics have been constructed in the laboratory apparatus made by ourselves with different binders (polyamide and polyethylene powder) and varying binder contents (10%, 20%, 30% and 40%). The tensile and compression properties of these nonwoven fabrics were tested. It was found that one can reduce powder binder content to increase loft and softness of nonwoven fabrics, but it has to sacrifice its tensile strength. Adhesion force between binder and single fibre was also explored. The experiments showed that the adhesion force at the interface between binder and fibre depends on the fibre variety, the fibre surface morphology, heating temperature and heating time etc..展开更多
The technical parameters and the structural factors of melt-blown nonwovens used as filteringmedium are analysed,the orientation of particles filtered in a filter is described,and the optimalparameters for air filtrat...The technical parameters and the structural factors of melt-blown nonwovens used as filteringmedium are analysed,the orientation of particles filtered in a filter is described,and the optimalparameters for air filtration are obtained.The results are shown as follows:the ratio of tenacity oflongitudinal to cross direction has a close agreement with the random coefficient of fiber arrange-ment in practice;large particles are most likely trapped on the surface of a filter,and smaller parti-cles are filtered throughout the depth of a filter,and the deeper,the smaller;moreover,higher fil-tering efficiency and lower pressure drop can be effected through the optimization of parameters.展开更多
This paper is concerned with the relation between the parameters of nonwoven filter and removing of white cells. Melt-blown polypropylene nonwovens are used as filtration materials of white cells filter. According to ...This paper is concerned with the relation between the parameters of nonwoven filter and removing of white cells. Melt-blown polypropylene nonwovens are used as filtration materials of white cells filter. According to the combination of different fiber diameter, different product density and different weight, optimized combination of parameters of nonwoven filter with more effective removing of white cells is obtained. The result is that removing of white cells is 96.90 percent; recovery of red cells is 92.27 percent.展开更多
The relationship between light scattering intensity and basis weight of nonwoven fabrics is studied by using the theory of electromagnetic wave propagation and scatter-ing in random media.The theoretical analysis show...The relationship between light scattering intensity and basis weight of nonwoven fabrics is studied by using the theory of electromagnetic wave propagation and scatter-ing in random media.The theoretical analysis shows that the backscattering intensity of nonwoven fabric is closely related to its basis weight,and 2 series nonwoven samples manufactured by spun-bonded and thermal-bounded processing methods are tested for checking the theoretical expression.The study shows that the scattering intensity increases with increasing basis weight of nonwoven fabrics in exponential equation,and theoretical expression is consistent with the experimental data.展开更多
基金supported by the National Natural Science Foundation of China(Nos.11605275 and 11675247)。
文摘In this study,to efficiently remove Pb(Ⅱ) from aqueous environments,a novel L-serine-modified polyethylene/polypropylene nonwoven fabric sorbent(NWF-serine)was fabricated through the radiation grafting of glycidyl methacrylate and subsequent L-serine modification.The effect of the absorbed dose was investigated in the range of 5–50 kGy.NWF-serine was characterized by Fourier transform infrared spectroscopy,thermogravimetric analysis,and scanning electron microscopy.Batch adsorption tests were conducted to investigate the influences of pH,adsorption time,temperature,initial concentration,and sorbent dosage on the Pb(Ⅱ) adsorption performance of NWF-serine.The results indicated that Pb(Ⅱ) adsorption onto NWF-serine was an endothermic process,following the pseudo-second-order kinetic model and Langmuir isotherm model.The saturated adsorption capacity was 198.1 mg/g.NWF-serine exhibited Pb(Ⅱ) removal rates of 99.8% for aqueous solutions with initial concentrations of 100 mg/L and 82.1% for landfill leachate containing competitive metal ions such as Cd,Cu,Ni,Mn,and Zn.Furthermore,NWF-serine maintained 86% of its Pb(Ⅱ) uptake after five use cycles.The coordination of the carboxyl and amino groups with Pb(Ⅱ) was confirmed using X-ray photoelectron spectroscopy and extended X-ray absorption fine structure analysis.
基金the Priority Academic Development Program for Textile Science and Textile Engineering of Jiangsu Higher Education Institutions,Chinathe Environmental Protection Department of Jiangsu Province,China(No.2012009)Suzhou Municipal Government,China(No.SYG201202)
文摘The monomer methacrylamido propyl trimethy ammonium chloride( MAPTAC) was copolymerized onto the fiber surface of polypropylene( PP) nonwoven fabric under ultroviole radiation. The weak acid red GN dye adsorption and adsorptive filtration performance of the resulted PP fabrics were investigated.The results showed that the grafting copolymerization preferred to happen in the inner layer of the fabrics. The water flux of the grafted fabrics decreases with the increase of grafting yield. The collapse of the grafted polymer chains causes the flux increase in acidic condition,or vice versa at alkaline version. The coiling of the polyelectrolyte chains upon the dye adsorption seems to violate the routine assumption of the rigid substrate, and this gets the adsorption energy constant negative. The static adsorption process follows the Lagergren's pseudo-second order kinetic equation. The removals of circa( ca.) 100% of the total permeation volume3 500 mL simulated dye wastewater was reached during permeation.The dye adsorbed fabrics were regenerated by the mixed media of the cationic surfactant / ethanol /water. The grafted fabric assumes stable fabric integrity and stability during permeation,and presents excellent dye adsorption capacity,easy desorption, and repeatable utilization.
基金Funded by the National Major Science & Technology Specific Projects (2009ZX10004-703)
文摘A novel antibacterial material （L-PET） was prepared by immobilizing ε-polylysine on polyethylene terephthalate （PET） nonwoven fabrics. Surface modifications of the fabric were performed by using a chemical modification procedure where carboxyl groups were prepared on the PET surface, a coupling agent was grafted, and the ε-polylysine was immobilized. Scanning electron microscopy （SEM） was used to analyze the surface morphology of the fabrics, while the toluidine blue method and X-ray photoelectron spectroscopy （XPS） were used to evaluate the grafting densities. The antibacterial activities of the L-PET were investigated by using the shaking-flask method. The electron micrographs showed that the surface of the blank PET and the modified fabrics did not change. The results of XPS analysis confirmed that ε-polylysine was successfully grafted onto the surface of PET. The results of the antibacterial experiments showed that L-PET fabrics had excellent antibacterial activity against Escherichia coli and Staphylococcus aureus, and that L-PET fabrics were stable in storage for at least two years.
文摘All types of surfactants (cationic, anionic and nonionic) reported in this paper could enhance the surficial wettability of polypropylene (PP) and polyethylene terephthalate (PET) nonwoven fabrics. However, the effects of cationic and nonionic surfactants were better. The longer the treatment time of surfactants on the nonwoven fabrics, the better the surficial wettability. The surficial rewetting time would no longer change above a certain treatment time. The rewettability of nonwoven fabrics could be evidently improved just when the concentration of surfactants was just above the CMC, except for sodium dodecylbenzene sulfonate (LAS). The finer the fibers and the looser the structures, the better the surficial rewettability of nonwoven fabrics.
文摘It has been found that there are marked errors in the value of valid opening size of heat-bonded nonwoven fabrics between theoretical calculations and engineering measurements. A new modified theoretical model is advanced in this paper. The equivalent diameter of the pore of a fibre web is used to calculate the valid opening size instead of the maximum diameter of inscribed circle used, because the fibres in practical fibre webs are flexible elastomers with definite diameters and the pore of fibre web may produce deformation in screening teat and engineering usage. The results show that the theoretical calculations coincide well with the engineering measurements. This method offers a theoretical basis for computer simulation to the performance of filters of heatbonded nonwoven fabrics.
文摘In this paper, the influence of processing parameters and powder binder content was studied and analysed on the properties of high loft nonwoven fabrics mainly using statistical analysis method. The relationship between the bulkiness and the warmth retention property was also tested. The analytical results reveal that the increase of the powder content, heating temperature and pressure will affect the tensile strength of nonwovens. Moreover, there are interactions between these parameters. The compression properties only change a little for a powder binder content of 15％—20％. However, with the increase of the heating temperature and pressure, the bulkiness and compression rate will reduce significantly. For the bulk density of high loft nonwoven fabrics, there exists a heat transter mechanism of air convection, but the higher the bulkiness of nonwovens, the larger the thickness and the better the warmth retention property of nonwoven fabrics.
文摘In this paper, two types of high loft nonwoven fabrics have been constructed in the laboratory apparatus made by ourselves with different binders (polyamide and polyethylene powder) and varying binder contents (10%, 20%, 30% and 40%). The tensile and compression properties of these nonwoven fabrics were tested. It was found that one can reduce powder binder content to increase loft and softness of nonwoven fabrics, but it has to sacrifice its tensile strength. Adhesion force between binder and single fibre was also explored. The experiments showed that the adhesion force at the interface between binder and fibre depends on the fibre variety, the fibre surface morphology, heating temperature and heating time etc..
文摘The technical parameters and the structural factors of melt-blown nonwovens used as filteringmedium are analysed,the orientation of particles filtered in a filter is described,and the optimalparameters for air filtration are obtained.The results are shown as follows:the ratio of tenacity oflongitudinal to cross direction has a close agreement with the random coefficient of fiber arrange-ment in practice;large particles are most likely trapped on the surface of a filter,and smaller parti-cles are filtered throughout the depth of a filter,and the deeper,the smaller;moreover,higher fil-tering efficiency and lower pressure drop can be effected through the optimization of parameters.
文摘This paper is concerned with the relation between the parameters of nonwoven filter and removing of white cells. Melt-blown polypropylene nonwovens are used as filtration materials of white cells filter. According to the combination of different fiber diameter, different product density and different weight, optimized combination of parameters of nonwoven filter with more effective removing of white cells is obtained. The result is that removing of white cells is 96.90 percent; recovery of red cells is 92.27 percent.
基金This project is aupported by key subject foundstion of Shanghai Educational Committee
文摘The relationship between light scattering intensity and basis weight of nonwoven fabrics is studied by using the theory of electromagnetic wave propagation and scatter-ing in random media.The theoretical analysis shows that the backscattering intensity of nonwoven fabric is closely related to its basis weight,and 2 series nonwoven samples manufactured by spun-bonded and thermal-bounded processing methods are tested for checking the theoretical expression.The study shows that the scattering intensity increases with increasing basis weight of nonwoven fabrics in exponential equation,and theoretical expression is consistent with the experimental data.
