One of the main disadvantages of combustion synthesis of ceramic/metal composite materials is the relatively high level of porosity present in the products. To synthesize TiC/Al composites with a dense structure, this...One of the main disadvantages of combustion synthesis of ceramic/metal composite materials is the relatively high level of porosity present in the products. To synthesize TiC/Al composites with a dense structure, this paper proposes a novel application of an elevated-temperature Al-melt to directly ignite and simultaneously infiltrate Al-Ti-C preform dipped in the melt. The emphasis was placed on the combustion synthesis process and mi-crostructural evolution of the preform in the melt, by a liquid quenching test combined with the measurement of the temperature history of the dipped preform. The results show that the combustion synthesis process of the preform in the elevated-temperature melt involves a series of reactions, and that higher temperature of the melt is favourable for the formation of TiC. The synthesized TiC/Al composites exhibit a dense structure, which is attributed to the infiltration of the melt into the preform.展开更多
The melt treatment of A1-7%Si alloy by the flux injection method in a resistance furnance was investigated. The experimental results show that the flux injection method can realize the melt treatment of A1-7%Si alloy....The melt treatment of A1-7%Si alloy by the flux injection method in a resistance furnance was investigated. The experimental results show that the flux injection method can realize the melt treatment of A1-7%Si alloy. In purification, the flux injection method is superior to the standard lance degassing method. For the injection flux, the purifier Na2SiF6 is more powerful than Na3A1F6, the modifiers SrCl2, and R.E. Cl3 are quick acting, like NaF, but less powerful, the grain refiner containing K2TiF6 and KBF4 with Ti/B=1 is more potent than that with Ti/B=5. The analytical results indicate that the mass-transfer rate for the flux injection method is much higher than that for the conventional method .展开更多
Ti-6Al-4V(TC4)used in dentistry and orthopedics as implant biomaterial faces the risk of microbiologically influenced corrosion(MIC)owing to the residence of diverse oral microorganisms.Hereinto,Streptococcus mutans i...Ti-6Al-4V(TC4)used in dentistry and orthopedics as implant biomaterial faces the risk of microbiologically influenced corrosion(MIC)owing to the residence of diverse oral microorganisms.Hereinto,Streptococcus mutans is a critical pathogenic microorganism that causes dental caries.This work investigated the corrosive effects of S.mutans on TC4 and functional gradient TC4/TC4-5Cu coupons fabricated by selective laser melting(SLM)through various electrochemical measurements,surface examination,observation of biofilm and corrosion analysis.The results indicated that the Cu-bearing alloy showed an inhibitory effect on the biofilms due to the release of Cu element,thereby reducing the corrosion rate of MIC.The corrosion current density(icorr)of TC4(11.7±0.8)nA cm−2 is higher than that of TC4/TC4-5Cu(7.4±0.4)nA cm−2 in the presence of S.mutans,while the maximum pit depth of TC4 is 1.6 times that of TC4/TC4-5Cu.Therefore,metal modification through Cu alloying is an effective strategy to improve the MIC resistance.展开更多
The melting temperature and critical transition temperature Tc of YBa2Cu3O7-δ with deferent content additives of PbO and BaPbO3 were studied. When PbO was doped in YBa2Cu3O7-δ, the melting temperature of YBa2Cu3O7-...The melting temperature and critical transition temperature Tc of YBa2Cu3O7-δ with deferent content additives of PbO and BaPbO3 were studied. When PbO was doped in YBa2Cu3O7-δ, the melting temperature of YBa2Cu3O7-δ was reduced, however its superconductivity was weakened. From the XRD pattern of the sintered mixture of YBa2Cu3O7-δ and PbO, it was known that there was a reaction between YBa2Cu3O7-δ and PbO, and the product was BaPbO3. Hence different contents of BaPbO3 (10mass%, 20mass% and 30mass%) were added in YBa2Cu3O7-δ. It was proved that there were no reactions between YBa2Cu3O7-δ and BaPbO3. And the superconductivity of the mixtures was much better than that of the samples with PbO additive.展开更多
Experiments on the partitioning of Cu between different granitic silicate melts and the respective coexisting aqueous fluids have been performed under conditions of 850 ℃, 100 MPa and oxygen fugacity （fO2） buffered...Experiments on the partitioning of Cu between different granitic silicate melts and the respective coexisting aqueous fluids have been performed under conditions of 850 ℃, 100 MPa and oxygen fugacity （fO2） buffered at approaching Ni-NiO （NNO）. Partition coefficients of Cu （Dcu = Cfluid/Cmelt） were varied with different alumina/alkali mole ratios [Al2O3/（Na2O ＋ K2O）, abbreviated as Al/ Alk], Na/K mole ratios, and SiO2 mole contents. The DCu increased from 1.28 ± 0.01 to 22.18 ±0.22 with the increase of Al/Alk mole ratios （ranging from 0.64 to 1.20） and Na/K mole ratios （ranging from 0.58 to 2.56）. The experimental results also showed that Dcu was positively correlated with the HCl concentration of the starting fluid. The Dcu was independent of the SiO2 mole content in the range of SiO2 content considered. No Dcu value was less than 1 in our experiments at 850 ℃ and 100 MPa, indicating that Cu preferred to enter the fluid phase rather than the coexisting melt phase under most conditions in the melt-fluid system, and thus a significant amount of Cu could be transported in the fluid phase in the magmatichydrothermal environment. The results indicated that Cu favored partitioning into the aqueous fluid rather than the melt phase if there was a high Na/K ratio, Na-rich, peraluminous granitic melt coexisting with the high Cl^- fluid.展开更多
Due to the unique structure of perovskite materials,their capacitance can be improved by introducing oxygen vacancy.In this paper,the LaMnO3-δ material containing oxygen vacancy was synthesized by molten salt method ...Due to the unique structure of perovskite materials,their capacitance can be improved by introducing oxygen vacancy.In this paper,the LaMnO3-δ material containing oxygen vacancy was synthesized by molten salt method in KNO3-NaNO3-NaNO2 melt.The La-Mn-O crystal grows gradually in molten salt with the increase of temperature.It was confirmed that LaMnO3-δ with perovskite structure and incomplete oxygen content were synthesized by molten salt method and presented a three-dimensional shape.LaMnO3-δ stores energy by redox reaction and adsorption of OH-in electrolyte simultaneously.In comparison with the stoichiometric LaMnO3 prepared by the sol-gel method,LaMnO3-δ prepared by molten salt method proffered higher capacitance and better performance.The galvanostatic charge-discharge curve showed specific capacitance of 973.5 F/g under current density of 1 A/g in 6 M KOH.The capacitance of LaMn03-δ was 82.7%under condition of 5 A/g compared with the capacitance at the current of 1A/g,and the specific capacitances of 648.0 and 310.0 F/g were obtained after 2000 and 5000 cycles of galvanostatic charging-discharging,respectively.Molten salt synthesis method is relatively simple and suitable for industrial scale,presenting a promising prospect in the synthesis of perovskite oxide materials.展开更多
A mesoscopic model has been established to investigate the thermodynamic mechanisms and densification behavior of nickel-based superalloy during additive manufacturing/three-dimensional （3D） printing （AM/3DP） by n...A mesoscopic model has been established to investigate the thermodynamic mechanisms and densification behavior of nickel-based superalloy during additive manufacturing/three-dimensional （3D） printing （AM/3DP） by numerical simulation, using a finite volume method （FVM）. The influence of the applied linear energy density （LED） on dimensions of the molten pool, thermodynamic mechanisms within the pool, bubbles migration and resultant densification behavior of AM/3DP-processed superalloy has been discussed. It reveals that the center of the molten pool slightly shifts with a lagging of 4 ktm towards the center of the moving laser beam. The Mar- angoni convection, which has various flow patterns, plays a crucial role in intensifying the convective heat and mass transfer, which is responsible for the bubbles migration and densification behavior of AM/3DP-processed parts. At an optimized LED of 221.5 J/m, the outward convection favors the numerous bubbles to escape from the molten pool easily and the resultant considerably high relative density of 98.9 % is achieved. However, as the applied LED further increases over 249.5 J/m, the convection pattern is apparently intensified with the formation of vortexes and the bubbles tend to be entrapped by the rotating flow within the molten pool, resulting in a large amount of residual porosity and a sharp reduction in densification of the superalloy. The change rules of the relative density and the corresponding distribution of porosity obtained by experiments are in accordance with the simulation results.展开更多
17-4 precipitation-hardened(PH)stainless steel(SS)exhibits high strength and good corrosion resistance via Cu-precipitation hardening.Unlike conventional wrought 17-4PH SS,Cu segregation andε-Cu pre-cipitates are obs...17-4 precipitation-hardened(PH)stainless steel(SS)exhibits high strength and good corrosion resistance via Cu-precipitation hardening.Unlike conventional wrought 17-4PH SS,Cu segregation andε-Cu pre-cipitates are observed in additively manufactured(AM)17-4PH SS owing to the repeated rapid cooling after heating,which characterizes the AM process.In this study,solution treatment was conducted under various temperatures(1,000,1,050,1,100,and 1,200℃)and durations(1,2,4,and 8 h)to minimize the negative effects of Cu segregation andε-Cu precipitates on precipitation hardening.The mechanical prop-erties and microstructures of each condition for the Cu precipitation behavior were examined.Although theε-Cu precipitates did not disappear after solution treatment,the average diameter of theε-Cu precipi-tates tended to decrease with increasing solution treatment temperature and duration.Therefore,solution treatment at a temperature of 1,200℃ for 8 h was the best,resulting in improved strength compared to the conventional solution treatment at 1,050℃.Solution treatment on at least 1,100℃ is effective in AM.展开更多
基金Financially supported by the Foundation for Excellent Youth of Wuhan City (No. 20015005028) and the Opening Foundation of State Key Lab of Advanced Technology for Materials Synthesis and Processing.
文摘One of the main disadvantages of combustion synthesis of ceramic/metal composite materials is the relatively high level of porosity present in the products. To synthesize TiC/Al composites with a dense structure, this paper proposes a novel application of an elevated-temperature Al-melt to directly ignite and simultaneously infiltrate Al-Ti-C preform dipped in the melt. The emphasis was placed on the combustion synthesis process and mi-crostructural evolution of the preform in the melt, by a liquid quenching test combined with the measurement of the temperature history of the dipped preform. The results show that the combustion synthesis process of the preform in the elevated-temperature melt involves a series of reactions, and that higher temperature of the melt is favourable for the formation of TiC. The synthesized TiC/Al composites exhibit a dense structure, which is attributed to the infiltration of the melt into the preform.
文摘The melt treatment of A1-7%Si alloy by the flux injection method in a resistance furnance was investigated. The experimental results show that the flux injection method can realize the melt treatment of A1-7%Si alloy. In purification, the flux injection method is superior to the standard lance degassing method. For the injection flux, the purifier Na2SiF6 is more powerful than Na3A1F6, the modifiers SrCl2, and R.E. Cl3 are quick acting, like NaF, but less powerful, the grain refiner containing K2TiF6 and KBF4 with Ti/B=1 is more potent than that with Ti/B=5. The analytical results indicate that the mass-transfer rate for the flux injection method is much higher than that for the conventional method .
基金supported by the National Natural Science Foundation of China(No.52301091)the Medical Engineering Intersection Joint Funds of the Natural Science Foundation of Liaoning Province of China(No.2022-YGJC-01).
文摘Ti-6Al-4V(TC4)used in dentistry and orthopedics as implant biomaterial faces the risk of microbiologically influenced corrosion(MIC)owing to the residence of diverse oral microorganisms.Hereinto,Streptococcus mutans is a critical pathogenic microorganism that causes dental caries.This work investigated the corrosive effects of S.mutans on TC4 and functional gradient TC4/TC4-5Cu coupons fabricated by selective laser melting(SLM)through various electrochemical measurements,surface examination,observation of biofilm and corrosion analysis.The results indicated that the Cu-bearing alloy showed an inhibitory effect on the biofilms due to the release of Cu element,thereby reducing the corrosion rate of MIC.The corrosion current density(icorr)of TC4(11.7±0.8)nA cm−2 is higher than that of TC4/TC4-5Cu(7.4±0.4)nA cm−2 in the presence of S.mutans,while the maximum pit depth of TC4 is 1.6 times that of TC4/TC4-5Cu.Therefore,metal modification through Cu alloying is an effective strategy to improve the MIC resistance.
文摘The melting temperature and critical transition temperature Tc of YBa2Cu3O7-δ with deferent content additives of PbO and BaPbO3 were studied. When PbO was doped in YBa2Cu3O7-δ, the melting temperature of YBa2Cu3O7-δ was reduced, however its superconductivity was weakened. From the XRD pattern of the sintered mixture of YBa2Cu3O7-δ and PbO, it was known that there was a reaction between YBa2Cu3O7-δ and PbO, and the product was BaPbO3. Hence different contents of BaPbO3 (10mass%, 20mass% and 30mass%) were added in YBa2Cu3O7-δ. It was proved that there were no reactions between YBa2Cu3O7-δ and BaPbO3. And the superconductivity of the mixtures was much better than that of the samples with PbO additive.
文摘Experiments on the partitioning of Cu between different granitic silicate melts and the respective coexisting aqueous fluids have been performed under conditions of 850 ℃, 100 MPa and oxygen fugacity （fO2） buffered at approaching Ni-NiO （NNO）. Partition coefficients of Cu （Dcu = Cfluid/Cmelt） were varied with different alumina/alkali mole ratios [Al2O3/（Na2O ＋ K2O）, abbreviated as Al/ Alk], Na/K mole ratios, and SiO2 mole contents. The DCu increased from 1.28 ± 0.01 to 22.18 ±0.22 with the increase of Al/Alk mole ratios （ranging from 0.64 to 1.20） and Na/K mole ratios （ranging from 0.58 to 2.56）. The experimental results also showed that Dcu was positively correlated with the HCl concentration of the starting fluid. The Dcu was independent of the SiO2 mole content in the range of SiO2 content considered. No Dcu value was less than 1 in our experiments at 850 ℃ and 100 MPa, indicating that Cu preferred to enter the fluid phase rather than the coexisting melt phase under most conditions in the melt-fluid system, and thus a significant amount of Cu could be transported in the fluid phase in the magmatichydrothermal environment. The results indicated that Cu favored partitioning into the aqueous fluid rather than the melt phase if there was a high Na/K ratio, Na-rich, peraluminous granitic melt coexisting with the high Cl^- fluid.
基金financially supported by the China Scholarship Council,the National Natural Science Foundation of China(21976047,21790373 and 51774104)the Fundamental Research funds for the Central Universities(3072019CF1005)+1 种基金the Scientific Research and Special Foundation Heilongjiang Postdoctoral Science Foundation(LBH-Q15019,LBH-Q15020 and LBH-TZ0411)Ph.D.Student Research and Innovation Fund of the Fundamental Research Funds for the Central Universities(3072019GIP1011)。
文摘Due to the unique structure of perovskite materials,their capacitance can be improved by introducing oxygen vacancy.In this paper,the LaMnO3-δ material containing oxygen vacancy was synthesized by molten salt method in KNO3-NaNO3-NaNO2 melt.The La-Mn-O crystal grows gradually in molten salt with the increase of temperature.It was confirmed that LaMnO3-δ with perovskite structure and incomplete oxygen content were synthesized by molten salt method and presented a three-dimensional shape.LaMnO3-δ stores energy by redox reaction and adsorption of OH-in electrolyte simultaneously.In comparison with the stoichiometric LaMnO3 prepared by the sol-gel method,LaMnO3-δ prepared by molten salt method proffered higher capacitance and better performance.The galvanostatic charge-discharge curve showed specific capacitance of 973.5 F/g under current density of 1 A/g in 6 M KOH.The capacitance of LaMn03-δ was 82.7%under condition of 5 A/g compared with the capacitance at the current of 1A/g,and the specific capacitances of 648.0 and 310.0 F/g were obtained after 2000 and 5000 cycles of galvanostatic charging-discharging,respectively.Molten salt synthesis method is relatively simple and suitable for industrial scale,presenting a promising prospect in the synthesis of perovskite oxide materials.
基金supported by the National Natural Science Foundation of China (51575267, 51322509)the Top-Notch Young Talents Program of China+9 种基金the Outstanding Youth Foundation of Jiangsu Province of China (BK20130035)the Program for New Century Excellent Talents in University (NCET-13-0854)the Science and Technology Support Program (the Industrial Part)Jiangsu Provincial Department of Science and Technology of China (BE2014009-2)the 333 high-level talents training project (BRA2015368)the Science and Technology Foundation for Selected Overseas Chinese Scholar, Ministry of Human Resources and Social Security of Chinathe Aeronautical Science Foundation of China (2015ZE52051)the Shanghai Aerospace Science and Technology Innovation Fund (SAST2015053)the Fundamental Research Funds for the Central Universities (NE2013103, NP2015206 and NZ2016108)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘A mesoscopic model has been established to investigate the thermodynamic mechanisms and densification behavior of nickel-based superalloy during additive manufacturing/three-dimensional （3D） printing （AM/3DP） by numerical simulation, using a finite volume method （FVM）. The influence of the applied linear energy density （LED） on dimensions of the molten pool, thermodynamic mechanisms within the pool, bubbles migration and resultant densification behavior of AM/3DP-processed superalloy has been discussed. It reveals that the center of the molten pool slightly shifts with a lagging of 4 ktm towards the center of the moving laser beam. The Mar- angoni convection, which has various flow patterns, plays a crucial role in intensifying the convective heat and mass transfer, which is responsible for the bubbles migration and densification behavior of AM/3DP-processed parts. At an optimized LED of 221.5 J/m, the outward convection favors the numerous bubbles to escape from the molten pool easily and the resultant considerably high relative density of 98.9 % is achieved. However, as the applied LED further increases over 249.5 J/m, the convection pattern is apparently intensified with the formation of vortexes and the bubbles tend to be entrapped by the rotating flow within the molten pool, resulting in a large amount of residual porosity and a sharp reduction in densification of the superalloy. The change rules of the relative density and the corresponding distribution of porosity obtained by experiments are in accordance with the simulation results.
基金This work was funded by Yangyoung Foundation and supported by the Technology Innovation Program(grant No.20009815,Development of DfAM-based 3D printing technology for lightweight and integrated aerospace parts)funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea).
文摘17-4 precipitation-hardened(PH)stainless steel(SS)exhibits high strength and good corrosion resistance via Cu-precipitation hardening.Unlike conventional wrought 17-4PH SS,Cu segregation andε-Cu pre-cipitates are observed in additively manufactured(AM)17-4PH SS owing to the repeated rapid cooling after heating,which characterizes the AM process.In this study,solution treatment was conducted under various temperatures(1,000,1,050,1,100,and 1,200℃)and durations(1,2,4,and 8 h)to minimize the negative effects of Cu segregation andε-Cu precipitates on precipitation hardening.The mechanical prop-erties and microstructures of each condition for the Cu precipitation behavior were examined.Although theε-Cu precipitates did not disappear after solution treatment,the average diameter of theε-Cu precipi-tates tended to decrease with increasing solution treatment temperature and duration.Therefore,solution treatment at a temperature of 1,200℃ for 8 h was the best,resulting in improved strength compared to the conventional solution treatment at 1,050℃.Solution treatment on at least 1,100℃ is effective in AM.
