Textured Asymmetric Membrane Electrode Assemblies of Piezoelectric Phosphorene and Ti_(3)C_(2)T_(x)MXene Heterostructures for Enhanced Electrochemical Stability and Kinetics in LIBs

Black phosphorus with a superior theoretical capacity(2596 mAh g^(-1))and high conductivity is regarded as one of the powerful candidates for lithium-ion battery(LIB)anode materials,whereas the severe volume expansion and sluggish kinetics still impede its applications in LIBs.By contrast,the exfoliated two-dimensional phosphorene owns negligible volume variation,and its intrinsic piezoelectricity is considered to be beneficial to the Li-ion transfer kinetics,while its positive influence has not been discussed yet.Herein,a phosphorene/MXene heterostructure-textured nanopiezocomposite is proposed with even phosphorene distribution and enhanced piezo-electrochemical coupling as an applicable free-standing asymmetric membrane electrode beyond the skin effect for enhanced Li-ion storage.The experimental and simulation analysis reveals that the embedded phosphorene nanosheets not only provide abundant active sites for Li-ions,but also endow the nanocomposite with favorable piezoelectricity,thus promoting the Li-ion transfer kinetics by generating the piezoelectric field serving as an extra accelerator.By waltzing with the MXene framework,the optimized electrode exhibits enhanced kinetics and stability,achieving stable cycling performances for 1,000 cycles at 2 A g^(-1),and delivering a high reversible capacity of 524 m Ah g^(-1)at-20℃,indicating the positive influence of the structural merits of self-assembled nanopiezocomposites on promoting stability and kinetics.

Preparation of Nano-porous Materials(Ⅰ) by Polymerization of Amphiphile Self-assemblies

The polymerization of amphiphilic self assemblies is a promising method to synthesize nano structured materials with novel properties. These materials have many attractive features for their application in biomedical area and materials science, such as catalysis, separation, surface modification, and therapeutics areas. A general review on the polymerization of lipids and surfactant self assemblies to amphiphilic self assemblies is given in this paper with 49 references. The polymerization and the subsequently resulted structure of lipids in different morphologies are summarized. The polymerization of polymerizable surfactants(surfmers) in emulsion and liquid crystalline phases are also discussed. The potential application of new nano porous materials is briefly described.

DESIGN REUSE METHOD FOR ASSEMBLIES IN CONCEPT DESIGN

Aiming at difficult sorting and retrieving complicated structure assembliesin assembly lib, a method for compartmentalizing assembly design resource by conceptual productstructure model is presented. The similar assembly retrieval mechanisms of symbol assembly relationgraph matching and symbol assembly relation graph similarity are discussed. The method is validatedby taking valve rod assemblies as example.

Surface-enhanced Raman scattering properties of highly ordered self-assemblies of gold nanorods with different aspect ratios

Gold nanorods with aspect ratios of from 1 （particles） to 31.6 were synthesized by the seed-mediated method and packed in a highly ordered structure on a large scale on silicon substrates through capillary force induced self-assembly behaviour during solvent evaporation. The gold nanorod surface exhibits a strong enhancing effect on Raman scattering spectroscopy. The enhancement of Raman scattering for two model molecules （2-naphthalenethiol and rhodamine 6C） is about 5-6 orders of magnitude. By changing the aspect ratio of the Au nanorods, we found that the enhancement factors decreased with the increase of aspect ratios. The observed Raman scattering enhancement is strong and should be ascribed to the surface plasmon coupling between closely packed nanorods, which may result in huge local electromagnetic field enhancements in those confined junctions.

基于UG-assemblies的冷冲模设计

本文介绍了基于UG的冲模设计方法,并结合实例着重介绍了在UG中利用建模、"自上而下"的装配以及关联设计的方法进行冲压模具设计,以及如何根据冲模图纸规范出总装图和零件图。

Dynamic probabilistic analysis of stress and deformation for bladed disk assemblies of aeroengine

In order to describe and control the stress distribution and total deformation of bladed disk assemblies used in the aeroengine, a highly efficient and precise method of probabilistic analysis which is called extremum response surface method(ERSM) is produced based on the previous deterministic analysis results with the finite element model(FEM). In this work, many key nonlinear factors, such as the dynamic feature of the temperature load, the centrifugal force and the boundary conditions, are taken into consideration for the model. The changing patterns with time of bladed disk assemblies about stress distribution and total deformation are obtained during the deterministic analysis, and at the same time, the largest deformation and stress nodes of bladed disk assemblies are found and taken as input target of probabilistic analysis in a scientific and reasonable way. Not only their reliability, historical sample, extreme response surface(ERS) and the cumulative probability distribution function but also their sensitivity and effect probability are obtained. Main factors affecting stress distribution and total deformation of bladed disk assemblies are investigated through the sensitivity analysis of the model. Finally, compared with the response surface method(RSM) and the Monte Carlo simulation(MCS), the results show that this new approach is effective.

BUCKLING ANALYSIS UNDER COMBINED LOADING OF THIN-WALLED PLATE ASSEMBLIES USING BUBBLE FUNCTIONS

Bubble functions are finite element modes that are zero on the boundary of the element but nonzero at the other point. The present paper adds bubble functions to the ordinary Complex Finite Strip Method(CFSM) to calculate the elastic local buckling stress of plates and plate assemblies. The results indicate that the use of bubble functions greatly improves the convergence of the Finite Strip Method(FSM) in terms of strip subdivision, and leads to much smaller storage required for the structure stiffness and stability matrices. Numerical examples are given, including plates and plate structures subjected to a combination of longitudinal and transverse compression, bending and shear. This study illustrates the power of bubble functions in solving stability problems of plates and plate structures.

Enhancement of current density using effective membranes electrode assemblies for water electrolyser system

The goal of this study was to develop and design a composite proton exchange membrane（PEM） and membrane electrode assembly（MEA） that are suitable for the PEM based water electrolysis system. In particular,it focuses on the development of sulphonated polyether ether ketone（SPEEK） based membranes and caesium salt of silico-tungstic acid（Cs Si WA） matrix compared with one of the transition metal oxides such as titanium dioxide（TiO2）, silicon dioxide（SiO2） and zirconium dioxide（ZrO2）. The resultant membranes have been characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, ion exchange capacity（IEC）, water uptake and atomic force microscopy. Comparative studies on the performance of MEAs were also conducted utilizing impregnation-reduction and conventional brush coating methods. The PEM electrolysis performance of SPEEK-Cs Si WA-ZrO2 composite membrane was more superior than that of other membranes involved in this study. Electrochemical characterization shows that a maximum current density of 1.4 A/cm^2 was achieved at 60 °C, explained by an increased concentration of protonic sites available at the interface.

Microstructural Evolution and Cracking of Pb-free Ball Grid Array Assemblies under Thermal Cycling

Two kinds of CBGA （ceramic ball grid array） assemblies were made by reflow soldering process using two different Pb-free solders. Microstructural evolution and cracks induced by thermal cycling in CBGA assemblies were examined by scanning electron microscopy （SEM） and finite element method （FEM）. Before thermal cycling, intermetallic compounds （IMCs） Cu6Sn5 and Ag3Sn were observed at the solder interface between Cu and Ag metallizations, respectively. After thermal cycling, another IMC Cu3Sn was observed near the Cu pad in both two assemblies and the layers of Cu6Sn5 and Ag3Sn became thicker. As a result of thermal cycling, cyclic stress and strain were accumulated in the solder joint leading to fatigue cracking. Both experiments and FEM revealed that cracks preferred to initiate at the corner of each solder joint. Multi-modes of the crack propagation were found in the two assemblies. Based on Coffin-Manson equation, the thermal fatigue life was calculated and the predicted life showed good agreement with the experimental results.

Fast acclimation of phytoplankton assemblies to acute salinity stress in the Jiulong River Estuary

Mixing of freshwater and seawater creates the well-known salinity gradients along the estuaries. In order to investigate how phytoplankton respond to the acute salinity changes, we exposed natural phytoplankton assemblies from the Jiulong River Estuary to differential saline field water while continuously monitoring their photosynthetic performances under both indoor-and outdoor-growth conditions. When the natural cell assemblies from salinity 30 field water were exposed to series low saline field water(salinity 25, 17, 13 and 7.5), the effective Photosystem II quantum yield(ΔF/Fm′) decreased sharply, e.g., to one-fifth of its initials after 5 min exposure to salinity 7.5 field water, and then increased fast during the following 40 min and almost completely recovered after 320 min. During such an exposure process, non-photochemical quenching(NPQ) sharply increased from 0 to 0.85 within 5 min, and then decreased to nearly 0 within the following 70 min. When these cells re-acclimated to salinity 7.5 field water were exposed to series high saline field water(salinity 13, 17, 25 and 30), a similar response pattern was observed, with the decreased ΔF/Fm′ accompanied with increased NPQ, and followed by the recovery-induced increase in ΔF/Fm′ and decrease in NPQ. A similar response pattern as ΔF/Fm′to the acute osmotic stress was also observed in the photosynthetic carbon fixation capacity according to radiocarbon(14C) incorporation. Our results indicate that estuarine phytoplankton assemblies could rapidly recover from the acute osmotic stress, implying a potential cause for their frequent blooms in coastal-estuarine waters where despite drastically varying salinity, available nutrients are abundant due to the land-derived runoffs or mixing-caused relaxations from sediments.

Preparation of Nano-porous Materials(Ⅱ) by Cross-linking of Amphiphilic Self-assemblies

Amphiphilic block copolymers can exhibit rich and complex morphologies in aqueous solutions, but these structures are usually delicate, easily disturbed by composition change or temperature change. In this work, the use of different methods to cross link block copolymer self assemblies in the presence of a selective solvent and to stabilize the structures is reviewed. In addition, the cross linking reaction kinetics of block copolymer amphiphilic self assemblies is briefly discussed.

Reaction rates in blanket assemblies of a fusion-fission hybrid reactor

To validate neutronics calculation for the blanket design of fusion-fission hybrid reactor,experiments for measuring reaction rates inside two simulating assemblies are performed.Two benchmark assemblies were developed for the neutronics experiments.A D-T fusion neutron source is placed at the center of the setup.One of them consists of three layers of depleted uranium shells and two layers of polyethylene shells,and these shells are arranged alternatively.The ^(238)U capture reaction rates are measured using depleted uranium foils and an HPGe gamma spectrometer.The fission reaction rates are measured using a fission chamber coated with depleted uranium.The other assembly consists of depleted uranium and LiH shells.The tritium production rates are measured using the lithium glass scintillation detector which is placed in the LiH region of the assembly.The measured reaction rates are compared with the calculated ones predicted using MCNP code,and C/E values are obtained.

Photoelectrochemical Studies on High Specific Capacitance-Photoactive Interfaces Based on Poly 3,4- Ethylenedioxythiophene/Metal Oxides Assemblies

Inorganic/organic interfaces (IOI) consist of TiO2/PEDOT (poly 3,4-ethylenedioxythiophene) and [PMo12O40]3- or MoO3/PEDOT were subject to photoelectrochemical studies in both aqueous nanosuspensions and in thin solid films. The effects PEDOT modifier caused on the photoelectrochemical behavior of the IOI were investigated using [Fe(CN)6]4- as the photoactive hydrated electron donor agent. Results show that native PEDOT or PEDOT doped with MoO3 thin films increased charge storage capability evident by the high capacitive current. In the case of nano suspensions composed of TiO2/PEDOT the adsorption process of [Fe(CN)6]3- (photolysis product) control of the photoactivity outcome of the IOI assemblies. TiO2/PEDOT shows a lower heterogeneous photochemical response than native TiO2 in short term photolysis times. At longer photolysis times the IOI shows photoactivity greater than that of native TiO2. The interface activities were explained by analyzing the IOI junction characteristics, such as electron affinity, work function and hole/electrons barrier heights. The aqueous nano-systems retained moderate stability as indicated by the reproducibility of their photocatalytic activities. Both [Fe(CN)6]4-and PEDT contributed to the stability of native TiO2 surfaces.

Ionic Liquid-Enhanced Assembly of Nanomaterials for Highly Stable Flexible Transparent Electrodes

The controlled assembly of nanomaterials has demon-strated significant potential in advancing technological devices.However,achieving highly efficient and low-loss assembly technique for nanomate-rials,enabling the creation of hierarchical structures with distinctive func-tionalities,remains a formidable challenge.Here,we present a method for nanomaterial assembly enhanced by ionic liquids,which enables the fabrication of highly stable,flexible,and transparent electrodes featuring an organized layered structure.The utilization of hydrophobic and non-volatile ionic liquids facilitates the production of stable interfaces with water,effectively preventing the sedimentation of 1D/2D nanomaterials assembled at the interface.Furthermore,the interfacially assembled nanomaterial monolayer exhibits an alternate self-climbing behavior,enabling layer-by-layer transfer and the formation of a well-ordered MXene-wrapped silver nanowire network film.The resulting composite film not only demonstrates exceptional photoelectric performance with a sheet resistance of 9.4Ωsq^(-1) and 93%transmittance,but also showcases remarkable environmental stability and mechanical flexibility.Particularly noteworthy is its application in transparent electromagnetic interference shielding materials and triboelectric nanogenerator devices.This research introduces an innovative approach to manufacture and tailor functional devices based on ordered nanomaterials.

The Compactions of Elasto-Plastic and Visco-Plastic Granular Assemblies

In this paper, the compactions of the elasto-plastic and the visco-plastic granular assemblies are simulated using the finite element method. Governing equations for motion and deformation for particles, including coupling of rigid body motion and deformation for deformable bodies, are investigated. An implicit discrete element method for block systems is developed to make visco-plastic analysis for the assemblies. Among particles, three different contact types, cohering, rubbing and sliding, are taken into account. To verify accuracy and efficiency of the numerical method, some numerical example is simulated and the results are in a satisfactory agreement with the solutions in literatures. The effects of frictional condition, the initial solid volume ratio, the number of particles in the assembly, and different types of compact- tion on the compaction of the elasto-plastic and the visco-plastic aggregates are investigated. It is demonstrated that the effect of frictional condition, the initial solid volume ratio, the number of particles in the assembly, and different types of compaction on the global behavior of the elasto-plastic the visco-plastic granular assemblies under compacting are considerable. The numerical model is extended to simulate the compaction of aggregates consisting of mixed particles of different viscous incompressible materials. It is indicated that, with minor modification, the method could be used in a variety of problems that can be represented using granular media, such as asphalt, polymers, aluminum, snow, food product, etc.

Bureaucratic Factors Impeding the Delivery of Infrastructure at the Metropolitan Municipal and District Assemblies (MMDAs) in Ghana

Decentralisation of infrastructure delivery to sub-national governments has become commonplace in governments worldwide especially in developing countries such as Ghana. This is due to the benefits of decentralisation in improving public service delivery. However, decentralised infrastructure delivery is marred with numerous challenges that render most local governments incapable of providing infrastructure within their localities. This paper explored the bureaucratic factors that impede infrastructure delivery at the MMDAs in Ghana. A questionnaire survey with 121 construction professionals in the Departments of Works (DoWs) of the MMDAs within the Ashanti and Greater Accra Regions of Ghana was conducted. The results indicated six (6) major components of the bureaucratic factors that impede the delivery of infrastructure at the MMDAs: Central government bureaucracy;Minimal control of MMDAs;Political influence;MMDA project funding;Lack of capacity of MMDAs;and Political interference. This paper calls for a more committed central government to the establishment of adequate decentralised structures and implementation of major reforms that would remove the bureaucratic obstacles in the delivery of infrastructure at the MMDAs, to ensure effective infrastructure delivery at the MMDAs.

Response and assembly of abundant and rare taxa in Zaopei under different combination patterns of Daqu and pit mud:from microbial ecology to Baijiu brewing microecosystem

The quality and aroma of strong-flavor Baijiu are mainly dependent on Daqu,pit mud(PM),and the interaction of both.However,little is known about how their combination patterns affect the microbiome and metabolome of Zaopei,especially the metabolic function of rare taxa.Here,an experiment on industrial size was designed to assess the effects of 6 combinations(3 kinds of Daqu×2 kinds of PM)on the composition and assembly of different taxa,as well as the flavor profile.The results showed that Zaopei's microbiota was composed of a few abundant taxa and enormous rare taxa,and rare bacterial and abundant fungal subcommunities were significantly affected by combination patterns.The assembly processes of abundant/rare taxa and bacterial/fungal communities were distinct,and environmental changes mediated the balance between stochastic and deterministic processes in rare bacteria assembly.Furthermore,specific combination patterns improved the flavor quality of Zaopei by enhancing the interspecies interaction,which was closely related to rare taxa,especially rare bacteria.These findings highlighted that rare bacteria might be the keystone in involving community interaction and maintaining metabolic function,which provided a scientific foundation for better understanding and regulating the brewing microbiota from the viewpoint of microbial ecology.

ANALYSIS OF THE HEAT TRANSFER IN FIN ASSEMBLIES BY THE BOUNDARY ELEMENT METHOD

The special formulation that allows an accurate and efficient solution to the heat transfer problems within fin assemblies with very large aspect ratios has been developed in this paper Numerically,it consists of the boundary element method in the wall region and the analytical solution in the fin region This modified BEM makes tractable a large class of heat transfer problems in the long and thin domains which are frequently encountered in practice.

Design and assembly of a nested imaging X-ray telescope for the Hot Universe Baryon Surveyor mission

The Hot Universe Baryon Surveyor (HUBS) mission will carry a nested X-ray telescope capable of observing an energy range from 0.5 keV to 2 keV to study hot baryon evolution. In this paper, we report the latest progress in the design and construction of nested X-ray telescopes which were designed to use a three-stage conic-approximation type assembly to simplify the manufacturing process. The mirror substrate is made using the thermal glass slumping method, with mirrors characterized by a root-mean-square roughness of 0.3 nm, with expected high reflectivity and good thermal stability. We also discuss methods of telescope construction and conduct a deformation analysis of the manufactured mirror. The in situ measurement system program is developed to guide the telescope assembly process.

Performance Investigation of Membrane Electrode Assemblies for High Temperature Proton Exchange Membrane Fuel Cell

Different types of ABPBI (poly(2,5-benzimidazole)) membranes and polymer binders were evaluated to investigate the performance of MEAs for high temperature proton exchange membrane fuel cell (HT-PEMFC). The properties of the prepared MEAs were evaluated and analyzed by polarization curve, electrochemistry impedance spectroscopy (EIS), cyclic voltammetry (CV) and durability test. The results showed that MEA with modified ABPBI membrane (AM) has satisfactory performance and durability for fuel cell application. Compare to conventional PBI or Nafion binders, polytetrafluoroethylene (PTFE) and polyvinylidene difluoride (PVDF) are more attractive as binders in the catalyst layer (CL) of gas diffusion electrode (GDE) for HT-PEMFC.