Quantitative Metal Magnetic Memory Reliability Modeling for Welded Joints

Metal magnetic memory（MMM） testing has been widely used to detect welded joints. However, load levels, environmental magnetic field, and measurement noises make the MMM data dispersive and bring difficulty to quantitative evaluation. In order to promote the development of quantitative MMM reliability assessment, a new MMM model is presented for welded joints. Steel Q235 welded specimens are tested along the longitudinal and horizontal lines by TSC-2M-8 instrument in the tensile fatigue experiments. The X-ray testing is carried out synchronously to verify the MMM results. It is found that MMM testing can detect the hidden crack earlier than X-ray testing. Moreover, the MMM gradient vector sum K_（vs） is sensitive to the damage degree, especially at early and hidden damage stages. Considering the dispersion of MMM data, the K_（vs） statistical law is investigated, which shows that K_（vs） obeys Gaussian distribution. So K_（vs） is the suitable MMM parameter to establish reliability model of welded joints. At last, the original quantitative MMM reliability model is first presented based on the improved stress strength interference theory. It is shown that the reliability degree R gradually decreases with the decreasing of the residual life ratio T, and the maximal error between prediction reliability degree R_1 and verification reliability degree R_2 is 9.15%. This presented method provides a novel tool of reliability testing and evaluating in practical engineering for welded joints.

Three-Dimensional Simulations of RESET Operation in Phase-Change Random Access Memory with Blade-Type Like Phase Change Layer by Finite Element Modeling

An optimized device structure for reducing the RESET current of phase-change random access memory （PCRAM） with blade-type like （BTL） phase change layer is proposed. The electrical thermal analysis of the BTL cell and the blade heater contactor structure by three-dimensional finite element modeling are compared with each other during RESET operation. The simulation results show that the programming region of the phase change layer in the BTL cell is much smaller, and thermal electrical distributions of the BTL cell are more concentrated on the TiN/GST interface. The results indicate that the BTL cell has the superiorities of increasing the heating efficiency, decreasing the power consumption and reducing the RESET current from 0.67mA to 0.32mA. Therefore, the BTL cell will be appropriate for high performance PCRAM device with lower power consumption and lower RESET current.

Effects of ginsenoside of stem and leaf combined with choline on learning and memory ability of rat models with Alzheimer diseases

BACKGROUND： Central adrenergic nerve and 5-serotonergic nerve can influence central cholinergic nerve on learning and memory and make easy for study; however, ginsenoside of stem and leaf （GSL） can improve functions of central adrenergic nerve; moreover, 5-serotonergic nerve and the combination with choline can produce synergistic effect and enhance learning and memory ability so as to improve learning and memory disorder of patients with Alzheimer disease （AD）. OBJECTIVE ： To observe the effects of GSL combining with choline on learning and memory of AD model rats DESIGN ： Randomized grouping design and controlled animal study SETIING ： Department of Pharmacology, Taishan Medical College MATERIALS ： The experiment was carried out in the Pharmacological Department of Medical College of Jilin University from October 1996 to January 1997. Forty healthy male Wistar rats of clean grade were randomly divided into 5 groups, including sham-injury group, model group, GSL group, choline group and combination group, with 8 rats in each group. Main medications： GSL with the volume more than 92.8% was provided by Department of Chemistry, Norman Bethune Medical College of Jilin University. Panaxatriol, the main component, was detected with thin layer scanning technique and regarded as the index of GSL quality [（55±1）%, CV= 2%, n = 5]. Choline was provided by the Third Shanghai Laboratory Factory. METHODS ： 150 nmol quinolinic acid was used to damage bilateral Meynert basal nuclei of adult rats so as to establish AD models. Rats in GSL, choline and combination groups were intragastric administrated with 400 mg/kg GSL, 200 mg/kg choline （20 mL/kg）, and both respectively last for 17 days starting from two days before operation. Rats in sham-injury group and model group were perfused with the same volume of distilled water once in each morning for the same days. （1） Passive avoidance step-down test： Five minutes later, rats jumped up safe platform when they were shocked with 36 V alternating current. If rats jumped down from the platform and the feet touched railings, the response was wrong. Numbers of wrong response were recorded within 3 minutes, and then the test was redone after 24 hours. （2） Morris water-maze spatial localization task： Swimming from jumping-off to platform directly was regarded as right response. Additionally, 4 successively right responses were regarded as the standard. Each rat was trained 10 times a day with 120 s per time for 3 successive days. The interval was 30 s. Three days later, numbers of right response were recorded. The training times were increased to 30 for unlearned rats. （3） Measurement of activity of choline acetylase in cerebral cortex： Rats were sacrificed at 17 days after operation to obtain cerebral cortex to measure activity of choline acetylase with radiochemistry technique. （4） Synergistic effect： It was expressed as Q value： Q value = factual incorporative effect/anticipant incorporative effect; Q ≥ 1 was regarded as synergistic effect. Anticipant incorporative effect = （EA＋EB-EA·EB）, EA and EB were single timing effect, respectively in GSL group and choline group. E（step-down test and Morris water maze test） = （x in model group - factual value in medicine groups）/x in model group; E （activity of choline acetylase） = （factual value in medicine groups -xin model group）/xin model group. MAIN OUTCOME MEASURES ： （1） Passive avoidance step-down test and Morris water-maze spatial localization task in the study of learning and memory; （2） activity of choline acetylase. RESULTS ： All 40 rats were involved in the final analysis. （1） Passive avoidance response： At learning phase on first day and retesting phase on the next day, numbers of wrong responses within 3 minutes were more in model group than sham operation group, and there was significant difference [（5.88±1.46）, （2.25±0.87） times; （2.63±1.06）, （0.50±0.53） times; P 〈 0.01]; numbers of wrong responses within 3 minutes were less in combination group than model group, and there was significant difference [learning phase： （1.12±0.83）, （5.88±1.46） times; retesting phase： （0.38±0.74）, （2.63±1.06）times, P 〈 0.01]; moreover, effect was stronger than that in GSL group and choline group. The Q value was 1.07 and 1.59, respectively and it showed synergistic effect. Spatial localization task： Training times were more in model group than sham operation group, and there was significant difference [（2.9±2.5）, （12.6±3.5） times; P 〈 0.01]. Training times were less in combination group than model group, and there was significant difference [（11.8±2.4）, （27.9±2.5） times, P 〈 0.01]; moreover, effect was stronger than that in GSL group and choline group. The Q value was 1.07 and it showed synergistic effect. （3） Activity of choline acetylase： Activity was lower in model group than sham operation group, and there was significant difference [（30.56±8.33）, （61.11 ±8.33） nkat/g; P 〈 0.01]. Activity was higher in combination group than model group and there was significant difference [（50.00±8.33）, （30.56±8.33） nkat/g, P 〈 0.01];moreover, effect was stronger than that in GSL group and choline group. The Q value was 1.5 and it showed synergistic effect. CONCLUSZON： GSL in combination with choline can synergically improve the disorder of learning and memory of AD model rats. Its mechanism may be involved in enhancing the function of central cholinergic system.

Review on structural fatigue of NiTi shape memory alloys:Pure mechanical and thermo-mechanical ones

Structural fatigue of NiTi shape memory alloys is a key issue that should be solved in order to promote their engineering applications and utilize their unique shape memory effect and super-elasticity more sufficiently. In this paper, the latest progresses made in experimental and theoretical analyses for the structural fatigue features of NiTi shape memory alloys are reviewed. First, macroscopic experimental observations to the pure mechanical and thermo-mechanical fatigue features of the alloys are summarized; then the state-of-arts in the mechanism analysis of fatigue rupture are addressed; further, advances in the construction of fatigue failure models are provided; finally, summary and future topics are outlined.

Catastrophe Theory Models for Stress-dependent Behaviour in a NiTi Shape Memory Alloy

The measurements by Huibin XU et al of the stress-dependence ot hysteresis in a NiTi shape memo ry alloy are modeled by catastrophe theory. The cusp catastrophe is used with the strain as the behaviour variable and the control parameters being functions of the stress and the temperature. A two constant model is found to be preferred to a four constant model.

A phenomenological memristor model for synaptic memory and learning behaviors

Properties that are similar to the memory and learning functions in biological systems have been observed and reported in the experimental studies of memristors fabricated by different materials. These properties include the forgetting effect, the transition from short-term memory（STM） to long-term memory（LTM）, learning-experience behavior, etc. The mathematical model of this kind of memristor would be very important for its theoretical analysis and application design.In our analysis of the existing memristor model with these properties, we find that some behaviors of the model are inconsistent with the reported experimental observations. A phenomenological memristor model is proposed for this kind of memristor. The model design is based on the forgetting effect and STM-to-LTM transition since these behaviors are two typical properties of these memristors. Further analyses of this model show that this model can also be used directly or modified to describe other experimentally observed behaviors. Simulations show that the proposed model can give a better description of the reported memory and learning behaviors of this kind of memristor than the existing model.

Robust state of charge estimation of lithium-ion battery via mixture kernel mean p-power error loss LSTM with heap-based-optimizer

The state of charge(SOC)estimation of lithium-ion battery is an important function in the battery management system(BMS)of electric vehicles.The long short term memory(LSTM)model can be employed for SOC estimation,which is capable of estimating the future changing states of a nonlinear system.Since the BMS usually works under complicated operating conditions,i.e the real measurement data used for model training may be corrupted by non-Gaussian noise,and thus the performance of the original LSTM with the mean square error(MSE)loss may deteriorate.Therefore,a novel LSTM with mixture kernel mean p-power error(MKMPE)loss,called MKMPE-LSTM,is developed by using the MKMPE loss to replace the MSE as the learning criterion in LSTM framework,which can achieve robust SOC estimation under the measurement data contaminated with non-Gaussian noises(or outliers)because of the MKMPE containing the p-order moments of the error distribution.In addition,a meta-heuristic algorithm,called heap-based-optimizer(HBO),is employed to optimize the hyper-parameters(mainly including learning rate,number of hidden layer neuron and value of p in MKMPE)of the proposed MKMPE-LSTM model to further improve its flexibility and generalization performance,and a novel hybrid model(HBO-MKMPE-LSTM)is established for SOC estimation under non-Gaussian noise cases.Finally,several tests are performed under various cases through a benchmark to evaluate the performance of the proposed HBO-MKMPE-LSTM model,and the results demonstrate that the proposed hybrid method can provide a good robustness and accuracy under different non-Gaussian measurement noises,and the SOC estimation results in terms of mean square error(MSE),root MSE(RMSE),mean absolute relative error(MARE),and determination coefficient R2are less than 0.05%,3%,3%,and above 99.8%at 25℃,respectively.

ALGEBRAIC TURBUL ENCE MODEL WITH MEM ORY FOR COMPUTATION OF 3-D TURBULENT BOUNDARY LAYERS WITH VALIDATION

Additional equations were found based on experiments for an algebraic turbulence model to improve the prediction of the behavior of three dimensional turbulent boundary layers by taking account of the effects of pressure gradient and the historical variation of eddy viscosity, so the model is with memory. Numerical calculation by solving boundary layer equations was carried out for the five pressure driven three dimensional turbulent boundary layers developed on flat plates, swept wing, and prolate spheroid in symmetrical plane. Comparing the computational results with the experimental data, it is obvious that the prediction will be more accurate if the proposed closure equations are used, especially for the turbulent shear stresses.

Predicting COVID-19 fatality rate based on age group using LSTM

Objective: To predict the daily incidence and fatality rates based on long short-term memory(LSTM) in 4 age groups of COVID-19 patients in Mazandaran Province, Iran.Methods: To predict the daily incidence and fatality rates by age groups, this epidemiological study was conducted based on the LSTM model. All data of COVID-19 disease were collected daily for training the LSTM model from February 22, 2020 to April 10, 2021 in the Mazandaran University of Medical Sciences. We defined 4 age groups, i.e., patients under 29, between 30 and 49, between 50 and 59, and over 60 years old. Then, LSTM models were applied to predict the trend of daily incidence and fatality rates from 14 to 40 days in different age groups. The results of different methods were compared with each other.Results: This study evaluated 5 0826 patients and 5 109 deaths with COVID-19 daily in 20 cities of Mazandaran Province. Among the patients, 25 240 were females(49.7%), and 25 586 were males(50.3%). The predicted daily incidence rates on April 11, 2021 were 91.76, 155.84, 150.03, and 325.99 per 100 000 people, respectively;for the fourteenth day April 24, 2021, the predicted daily incidence rates were 35.91, 92.90, 83.74, and 225.68 in each group per 100 000 people. Furthermore, the predicted average daily incidence rates in 40 days for the 4 age groups were 34.25, 95.68, 76.43, and 210.80 per 100 000 people, and the daily fatality rates were 8.38, 4.18, 3.40, 22.53 per 100 000 people according to the established LSTM model. The findings demonstrated the daily incidence and fatality rates of 417.16 and 38.49 per 100 000 people for all age groups over the next 40 days. Conclusions: The results highlighted the proper performance of the LSTM model for predicting the daily incidence and fatality rates. It can clarify the path of spread or decline of the COVID-19 outbreak and the priority of vaccination in age groups.

An operational happens-before memory model

Happens-before memory model （HMM） is used as the basis of Java memory model （JMM）. Although HMM itself is simple, some complex axioms have to be introduced in JMM to prevent the causality loop, which causes absurd out-of-thin-air reads that may break the type safety and se- curity guarantee of Java. The resulting JMM is complex and difficult to understand. It also has many anti-intuitive behav- iors, as demonstrated by the ＂ugly examples＂ by Aspinall and ~ev6~ [1]. Furthermore, HMM （and JMM） specifies only what execution traces are acceptable, but says nothing about how these traces are generated. This gap makes it difficult for static reasoning about programs. In this paper we present OHMM, an operational variation of HMM. The model is specified by giving an operational semantics to a language running on an abstract machine de- signed to simulate HMM. Thanks to its generative nature, the model naturally prevents out-of-thin-air reads. On the other hand, it uses a novel replay mechanism to allow instruc- tions to be executed multiple times, which can be used to model many useful speculations and optimization. The model is weaker than JMM for lockless programs, thus can accom- modate more optimization, such as the reordering of inde- pendent memory accesses that is not valid in JMM. Program behaviors are more natural in this model than in JMM, and many of the anti-intuitive examples in JMM are no longer valid here. We hope OHMM can serve as the basis for new memory models for Java-like languages.

A Framework of Memory Consistency Models

Previous descriptions of memory consistency models in shared-memory multiprocessor systems are mainly expressed as constraints on the memory access event ordering and hence are hardwae-centric. This paper presents a framework of memory consistency models which describes the memory consistency model on the behavior level.Based on the understanding that the behavior of an execution is determined by the execution order of confiicting accesses, a memory consistency model is defined as an interprocessor synchronization mechanism which orders the execution of operations from different processors. Synchronization order of an execution under certain consistency model is also defined. The synchronization order, together with the program order,determines the behavior of an execution.This paper also presents criteria for correct program and correct implementation of consistency models. Regarding an implementation of a consistency model as certain memory event ordering constraints, this paper provides a method to prove the correctness of consistency model implementations, and the correctness of the lock-based cache coherence protocol is proved with this method.

Study on behaviors of functionally graded shape memory alloy cylinder

For better controllability in actuations,it is desirable to create Functionally Graded Shape Memory Alloys（FG-SMAs）in the actuation direction.It can be achieved by applying different heat treatment processes to create the gradient along the radius of a SMA cylinder.Analytical solutions are derived to predict the macroscopic behaviors of such a functionally graded SMA cylinder.The Tresca yield criterion and linear hardening are used to describe the different phase transformations with different gradient parameters.The numerical results for an example of the model exhibit different pseudo-elastic behaviors from the non-gradient case,as well as a variational hysteresis loop for the transformation,providing a mechanism for easy actuation control.When the gradient disappears,the model can degenerate to the non-gradient case.

Effects of subconvulsive electrical stimulation to the hippocampus on emotionality and spatial learning and memory in rats

Objective To observe the effects of repeated subconvulsive electrical stimuli to the hippocampus on the emotional behavior and spatial learning and memory ability in rats.Methods One hundred and eight male Wistar rats were randomized into 3 groups. Animals in group SE (n = 42) were given subconvulsive electrical stimulation to the hippocampus through a constant pulsating current of 100 μA with an intratrain frequency of 25 Hz, pulse duration of 1 millisecond, train duration of 10 seconds and interstimulus interval of 7 minutes, 8 times a day, for 5 days. In the electrode control group or CE group (n = 33), animals were implanted with an electrode in the hippocampus, but were not stimulated. Group NC (n =33) animals received no electrode or any stimulation. The emotional behavior of experimental rats was examined by activity in an unfamiliar open field and resistance to capture from the open field, while the spatial learning and memory ability was measured during training in a Morris water maze.Results The stimulated rats tested 1 month after the last round of stimulation displayed substantial decreases in open field activity (scale: 10. 4±2. 3, P<0. 05) and increases in resistance to capture (scale: 2. 85±0. 56, P < 0. 01 ). The amount of time for rats in group SE to find the platform (latency) as a measurement for spatial bias was prolonged (29±7) seconds after 15 trials in the water maze, P<0. 05). The experimental rats swam aimlessly in all four pool quadrants during the probe trial in the Morris water maze.Conclusions Following repeated subconvulsive electrical stimuli to the hippocampus, rats displayed long-lasting significant abnormalities in emotional behavior, increased anxiety and defensiveness, enhanced ease to and delayed habituation to startlement, transitory spatial learning and memory disorder, which parallels many of the symptoms in posttraumatic stress disorder patients.

Trace Semantics and Algebraic Laws for Total Store Order Memory Model

Modern multiprocessors deploy a variety of weak memory models(WMMs).Total Store Order(TSO)is a widely-used weak memory model in SPARC implementations and x86 architecture.It omits the store-load constraint by allowing each core to employ a write buffer.In this paper,we apply Unifying Theories of Programming(abbreviated as UTP)in investigating the trace semantics for TSO,acting in the denotational semantics style.A trace is expressed as a sequence of snapshots,which records the changes in registers,write buffers and the shared memory.All the valid execution results containing reorderings can be described after kicking out those that do not satisfy program order and modification order.This paper also presents a set of algebraic laws for TSO.We study the concept of head normal form,and every program can be expressed in the head normal form of the guarded choice which is able to model the execution of a program with reorderings.Then the linearizability of the TSO model is supported.Furthermore,we consider the linking between trace semantics and algebraic semantics.The linking is achieved through deriving trace semantics from algebraic semantics,and the derivation strategy under the TSO model is provided.

A SPICE model for a phase-change memory cell based on the analytical conductivity model

By way of periphery circuit design of the phase-change memory,it is necessary to present an accurate compact model of a phase-change memory cell for the circuit simulation.Compared with the present model,the model presented in this work includes an analytical conductivity model,which is deduced by means of the carrier transport theory instead of the fitting model based on the measurement.In addition,this model includes an analytical temperature model based on the 1D heat-transfer equation and the phase-transition dynamic model based on the JMA equation to simulate the phase-change process.The above models for phase-change memory are integrated by using Verilog-A language,and results show that this model is able to simulate theⅠ-Ⅴcharacteristics and the programming characteristics accurately.

A Tibetan Sentence Boundary Disambiguation Model Considering the Components on Information on Both Sides of Shad

Sentence Boundary Disambiguation(SBD)is a preprocessing step for natural language processing.Segmenting text into sentences is essential for Deep Learning(DL)and pretraining language models.Tibetan punctuation marks may involve ambiguity about the sentences’beginnings and endings.Hence,the ambiguous punctuation marks must be distinguished,and the sentence structure must be correctly encoded in language models.This study proposed a component-level Tibetan SBD approach based on the DL model.The models can reduce the error amplification caused by word segmentation and part-of-speech tagging.Although most SBD methods have only considered text on the left side of punctuation marks,this study considers the text on both sides.In this study,465669 Tibetan sentences are adopted,and a Bidirectional Long Short-Term Memory(Bi-LSTM)model is used to perform SBD.The experimental results show that the F1-score of the Bi-LSTM model reached 96%,the most efficient among the six models.Experiments are performed on low-resource languages such as Turkish and Romanian,and high-resource languages such as English and German,to verify the models’generalization.

Velocity forecasts using a combined deep learning model in hybrid electric vehicles with V2V and V2I communication

Vehicle velocity forecast is an important clue in improving the performance of energy management in hybrid electric vehicles(HEV). This paper presents a new combined model for predicting vehicle’s velocity time series. The main features of the model are to combine the feature extraction capability of deep restricted Boltzmann machines(DBM) and sequence pattern predicting capability of bidirectional long short-term memory(BLSTM). Hence, the model is named as DBMBLSTM. In addition, the DRMBLSTM model utilizes the vehicle driving information and roadside infrastructure information provided respectively through vehicle-to-vehicle(V2V) and vehicle-to-infrastructure(V2I) communication channels to predict vehicle velocity at various length of prediction horizon. Furthermore, the predictions results of this study are compared with the state of the art of vehicle velocity forecasts. The root mean square error(RMSE) is used as an evaluation criteria of predictions accuracy. Finally,these compared prediction model are applied in model predictive control(MPC) energy management strategy for the verifications of fuel economy improvement of a HEV. Simulation results confirm that the proposed combined deep learning model performs better than other five prediction methods. Therefore, it is a means of arriving at a reliable forecast model for HEV.

An attention-based deep learning model for citywide traffic flow forecasting

Prompt and accurate traffic flow forecasting is a key foundation of urban traffic management.However,the flows in different areas and feature channels(inflow/outflow)may correspond to different degrees of importance in forecasting flows.Many forecasting models inadequately consider this heterogeneity,resulting in decreased predictive accuracy.To overcome this problem,an attention-based hybrid spatiotemporal residual model assisted by spatial and channel information is proposed in this study.By assigning different weights(attention levels)to different regions,the spatial attention module selects relatively important locations from all inputs in the modeling process.Similarly,the channel attention module selects relatively important channels from the multichannel feature map in the modeling process by assigning different weights.The proposed model provides effective selection and attention results for key areas and channels,respectively,during the forecasting process,thereby decreasing the computational overhead and increasing the accuracy.In the case involving Beijing,the proposed model exhibits a 3.7%lower prediction error,and its runtime is 60.9%less the model without attention,indicating that the spatial and channel attention modules are instrumental in increasing the forecasting efficiency.Moreover,in the case involving Shanghai,the proposed model outperforms other models in terms of generalizability and practicality.

Chip Multithreaded Consistency Model

Multithreaded technique is the developing trend of high performance processor. Memory consistency model is essential to the correctness, performance and complexity of multithreaded processor. The chip multithreaded consistency model adapting to multithreaded processor is proposed in this paper. The restriction imposed on memory event ordering by chip multithreaded consistency is presented and formalized. With the idea of critical cycle built by Wei-Wu Hu, we prove that the proposed chip multithreaded consistency model satisfies the criterion of correct execution of sequential consistency model. Chip multithreaded consistency model provides a way of achieving high performance compared with sequential consistency model and easures the compatibility of software that the execution result in multithreaded processor is the same as the execution result in uniprocessor. The implementation strategy of chip multithreaded consistency model in Godson-2 SMT processor is also proposed. Godson-2 SMT processor supports chip multithreaded consistency model correctly by exception scheme based on the sequential memory access queue of each thread.