Synthesis of Ln-doped MCM-41 mesoporous materials and their catalytic performance in oxidation of styrene

Using cetyl-trimethyl-ammonium bromide （CTMAB） as the template agent and tetraethylorthosilicate （TEOS） as the silica source, the MCM-41 mesoporous materials were synthesized with La or Ce incorporated in the framework under hydrothermal conditions. The structure and the state of La or Ce were investigated through the analyses of XRD, nitrogen adsorption-desorption, FT-IR, and UV-Vis. XRD and N2 adsorption-desorption results showed that Ln-MCM-41 exhibited the loss of the lattice ordering of the MCM-41 construct, and larger unit cell parameter and pore diameter than pure silica MCM-41. The FT-IR and UV-Vis results indicated the presence of isolated tetra-coordinated La or Ce ions in the framework and other Ln species dispersed highly on the Ln-MCM-41 surface simultaneously. Furthermore, their catalytic behaviors in the oxidation of styrene were studied using H2O2 as the oxidant. The La-MCM-41 catalysts exhibited high reactivity and the reactivity increased with the increase of the La content in the La-MCM-41 samples. On the contrary, Ce-MCM-41 catalysts showed low reactivity in the oxidation of styrene and the conversion of styrene decreased with the increase of the Ce content in the Ce-MCM-41 samples.

Structural Evolvement of Heating Treatment of Mg/AI-LDH and Preparation of Mineral Mesoporous Materials

Although hydrotalcite, or layered double hydroxides （LDHs）, is not a common mineral, it is an important material that can be easily synthesized in laboratory. In this study, structural evolvement and BET surface area changes of heat treated Mg/AI-LDH is evaluated by XRD, TEM and N2-BET analyses. The results indicate that the magnesium-aluminum LDH with carbonate as interlayer anion, periclase-like oxides was formed at temperatures of 400-800℃. Meanwhile, 2-3 nanometer mesoporous were formed during decomposition of LDH. However, the heat treated samples still preserve the morphology of the original LDH plates. Periclase-like formed from LDH heat treatment may re-hydrolyze and recover the structure of LDH. However, crystallinity of the recovered LDH is lower than that of the original LDH. This heat treatment will result in formation of （Mg, Al）-oxide nano-crystals and nanopores among the nano-crystals. When heating temperature exceeds 1000, the periclase-like （Mg, Al）-oxide is transformed into a composite with periclase （MgO） and spinel phases. The periclase can be re-hydrolyzed and dissolved in HCl solution. After acid treatment, the sample with a high surface area is composed of spinel nano-crystals and nanopores among them. Our results will provide a new and economic way to synthesize mesoporous materials through pathways of phase transformation of precursor materials with different composition.

Titanium-Containing Mesoporous Materials: Synthesis and Application in Selective Catalytic Oxidation

Titanium-containing mesoporous molecular sieves are of great significance in selective catalytic oxidation processes with bulky molecules. Recent researches and developments on the designing and synthesis of Ti-containing mesoporous materials have been reviewed. Various strategies for the preparation of Ti-containing mesoporous materials, such as direct synthesis and post-synthesis, are described. Modifications of Ti-containing mesoporous materials by surface-grafting and atom-planting are also discussed. All approaches aimed mainly at the improving of the stability, the hydrophobicity, and mostly the catalytic activity. Structural and mechanistic features of various synthetic systems are discussed. Ticontaining mesoporous materials in liquid phase catalytic oxidation of organic compounds with H2O2 as an oxidant is briefly summarized, showing their broad utilities for green synthesis of fine chemicals by catalytic oxidative reactions.

SYNTHESIS AND BIOTECHNOLOGICAL APPLICATIONS OF VINYL POLYMERINORGANIC HYBRID AND MESOPOROUS MATERIALS

We describe the sol-gel synthesis of a new family of organic-inorganic hybrid materials, in which various vinyl polymers are covalently bonded to and uniformly distributed in inorganic oxide matrices. The materials can be tailored to have both good toughness and hardness while maintaining excellent optical transparency. Doping the sol-gel metal oxides with optically active compounds such as D-glucose results in new optical rotatory composite materials. Removal of the dopant compounds from the composites affords mesoporous oxide materials; which represents a new, nonsurfactant-templated route to mesoporous molecular sieves. We have successfully immobilized a series of enzymes and other bioactive agents in mesoporous materials. Catalytical activities of the enzyme encapsulated in mesoporous materials were found to be much higher than those encapsulated in microporous materials.

Synthesis and Characterization of Mesoporous Materials MCM-41 Incorporated by Yttrium, Neodymium and Samarium

Using cetyl-trimethyl-ammonium bromide （CTMAB） as template and tetraethylortho-silicate （TEOS） as silica source, the MCM-41 mesoporous materials incorporated in framework by Y, Nd and Sm were synthesized by hydrothermal synthesis method. The structure, morphology of materials and the state of Y, Nd, Sm in materials were investigated by means of XRD, nitrogen adsorption-desorption, SEM, IR spectrometry, TG-DTA. The XRD results indicate that the samples possess the mesoporous MCM-41 structures with ordered hexagonal arrangements. Y, Nd and Sm ions can get into the framework of mesoporous materials. Nitrogen adsorption desorption isotherms show that the samples have typical mesopores characteristics. SEM micrographs reveal that incorporated sampies show a spherical morphology and the diameters are averagely 0. l0 to 0.15 μm. In IR spectrum of samples, there are the feature adsorption peaks about Si-O-Ln（Ln=Y, Sm, Nd）at 960-985 cm^-1, which affirm that Y, Nd, Sm ions locate in the framework of several mesoporous materials. Results from TG-DTA analysis suggest that two different template sorption sites exist in the framework of YMCM-41, SmMCM-41, NdMCM-41, which powerfully proves that the presence of Y, Nd and Sm in Si framework of the materials.

Synthesis and Characterization of Novel Layered Lithium Sodium Silicate (Silinaite) and the Mesoporous Materials from Silinaite

Novel layered silinaite has been synthesized using an aqueous mixture of water glass, LiOH and NaOH under hydrothermal crystallization. Subsequently transformation of silinaite into mesoporous materials （SDM） was achieved at mild condition using cetyltfimethylammonium bromide as structure-directing agents. The resulting samples were characterized by XRD, SEM, FTIR nitrogen adsorption-desorption isotherms and catalytic performance in bulky molecular involved reaction. The results revealed that synthesized mesoporous materials derived from the silinaite exhibited an ordered hexagonal crystal structure with average pore diameter 2.7 nm and BET surface area 817m^2/g. The SDM-supported ZnCl2 catalyst, prepared by impregnationevaporation method, retained the mesoporous structure and showed high selectivity in alkylation of benzene with benzyl chloride.

Effect of Surfactant/Silica and Hydrothermal Time on the Specific Surface Area of Mesoporous Materials from Coal-Measure Kaolin

Mesoporous materials with the highest surface area were synthesized by hydrothermal treatment from coal-measure kaolin using cetyltrimethylammonium bromide（CTAB）as template.The effect of several factors on surface area of products also had been discussed.The products were characterized by FT- IR,HRTEM and N 2 adsorption and desorption isotherm plot methods.There was typical structure as Si-O,Si- OH and Si-O-Si of mesoporous materials in the framework of synthesized materials;the pore size distributions of the products showed a sharp peak at 3.82 nm.The effect of hydrothermal treatment time and the amount of template on the specific surface area of mesoporous materials was important,when the Surf/Si=0.135,and hydrothermal time=12 h,and the surface area of the product reached up to 1 070 m2/g,which was higher than other products.

Synthesis and Characterization of Mesoporous Materials MCM-41 Incorporated by Yttrium, Neodymium and Samarium

Using cetyl-trimethyl-ammonium bromide （CTMAB） as template agent and tetraethylorthosilicate （TEOS） as silica Source, the MCM-41 mesoporous materials were synthesized with Y, Nd and Sm incorporated in the framework under hydrothermal conditions. The structure and the micro-morphology of the materials and the state of Y, Nd and Sm were investigated through the analyses of XRD, nitrogen adsorption-desorption isotherm, SEM, IR and TG-DTA. The XRD resuits indicate that the synthetic samples are of typical structure of mesoporous MCM-41 with ordered hexagonal arrangements, and Y, Nd and Sm can be incorporated into the framework of these mesoporous materials. Nitrogen adsorption-desorption isotherms show that the samples possess the typical mesopores character. SEM micrographs reveal that the incorporated samples show a well-defined spherical morphology with the diameter ranging 0.10 - 0.15μm. The occurrence of two different template sorption sites in the framework as revealed by TG-DTA analysis further suggests the presence of Y, Nd and Sm in siliceous framework.

Synthesis of lathanum or La-B doped KIT-6 mesoporous materials and their application in the catalytic oxidation of styrene

La-doped and La-B-doped KIT-6 mesoporous materials were prepared by direct hydrothermal synthesis with pH-adjusting method and characterized by X-ray diffractometer(XRD),nitrogen sorption,FT-IR,UV-Vis,X-ray photoelectron spectroscopy(XPS) and ICP-AES.The catalytic performance for the oxidation of styrene by hydrogen peroxide,tert-butyl hydroperoxide or oxygen was investigated.The results showed that the introduction of heteroatoms did not destroy the mesostructure of KIT-6 with cubic Ia3d space group.La or ...

Study on the controllable synthesis of SH-MCM-41 mesoporous materials and their adsorption properties of the La3+, Gd3+and Yb3+

Sulfhydryl MCM-41(SH-MCM-41) mesoporous materials were prepared via a hydrothermal method,and-SH was successfully imported by a post-grafting method.The structure and surface properties of the materials were characterized using Fourier Transform infrared spectroscopy,X-ray diffraction and Transmission Electron Microscopy analysis.The low concentrations of La^3+,Gd^3+ and Yb^3+ adsorption on the material were investigated.This paper discusses the effects of system factors,such as pH and the solid-liquid ratio,on the performance of the adsorption process.The adsorption thermodynamics and kinetics were also explored.Experimental results indicated that the materials were in good order and had high specific surface area(956 m^2/g) with an average pore diameter of 2.1 nm;the mercapto groups were successfully grafted onto a molecular sieve,and the best grafted amount was 1.46×10^-3 mol/g.The materials showed preferable adsorption of La^3+,Gd^3+ and Yb^3+ with maximum adsorption capacities of560.56 mg/g,467.60 mg/g and 540.68 mg/g,respectively.The adsorption process can be described by the Freundlich isotherm model,and the adsorption data fits pseudo-second-order kinetics.After repeating the elution-regeneration cycle four times,the adsorption capacity of rare earth ions was mostly maintained,indicating that the adsorbent can be regenerated well and recycled to save costs.It has potential in practical application.

Gallery-templated Synthesis of Titanium/Silicon-containing Mesoporous Montmorillonite-based Catalytic Materials

A mesoporous titanium/silicon -containing montmorillonite-based catalytic materials has been synthesized by novel gallery-templated techniques. XRD, SEM, framework IR, and N2 adsorptiondesorption isotherms provided evidence of the formation of Si/Ti pillars. The synthetic materials show potential catalytic application for hydroxylation of phenol with peroxide.

CATALYTIC CONVERSION OF MUNICIPAL WASTE PLASTIC INTO GASOLINE-RANGE PRODUCTS OVER MESOPOROUS MATERIALS

In the last 20 years, it has become apparent that waste produced from plastics was becoming an environmental problem because of their low biodegradability. Though several methods have been proposed for recycling waste plastics, it is generally accepted that material recovery is not a long-term solution to the present problem, and that energy or chemical recovery is a more attractive alternative, including cracking into the monomer constituents, combustion to produce energy, and thermal or catalytic conversion to produce useful intermediate chemicals. This paper is a contribution in the area of the last option for energy recovery. There have been a number of publications reporting the use of molecular sieves and amorphous silica-alumina catalysts for the cracking of polymers into a range of hydrocarbons. The research work reported here demonstrates the ability of mesoporous catalysts in cracking polyethyl- ene into gasoline range products. It was found that for mesoporous MCM-41 catalysts, its cracking activity increases with its crystallinity, displaying higher activity with smaller pore diameters. The hydrocarbon product distribution strongly indicates a carbenium ion cracking mechanism. The product distribution was also compared with those obtained from thermal cracking tests.

SYNTHESIS OF MESOPOROUS POLY(STYRENE-co-MALEIC ANHYDRIDE)/SILICA HYBRID MATERIALS VIA A NONSURFACTANT-TEMPLATED SOL-GEL PROCESS

Mesoporous poly(styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis was achieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymer in the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template or pore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m(2)/g) and pore volumes (e.g. 0.6 cm(3)/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, pore volumes and pore diameters of the hybrid materials increase.

Synthesis of Mesoporous Cu-Mn-Al_2O_3 Materials and Their Applications to Preferential Catalytic Oxidation of CO in a Hydrogen-rich Stream

A series of mesoporous Cu-Mn-Al2O3（CMA） materials was synthesized at moderate temperature and their structures were characterized by XRD, N2 physical adsorption and TPR techniques. It was found that using metal complex ion[Cu（NH3） 4^2＋-Mn（NH3）6^2＋] as raw materials is easier to form good-structure mesoporous Cu-Mn-Al2O3 materials than using its nitrate salt [Cu（NO3）2-Mn（NO3）2]. The TPR tests results indicate that CuO and MnOx were homogeneously dispersed in the mesoporous materials. Their catalytic application to preferential catalytic oxidation of CO in a hydrogen-rich stream was studied. The activity varies in the order of CMA（1：1, molar ratio）〉 CMA（1：2）〉CMA（2：1）〉CMA（CP）〉CMA（1：0）≈CMA（0：1）. The CMA（1：0） and CMA（0：1） have lower activity compared to other samples, implying that there existed coordination effect between Cu-Mn in the samples. The selectivity varied in the order of CMA（0：1）≥CMA（1：2）〉CMA（1：1）〉CMA（2：1）〉CMA（1：0） at higher temperature （≥ 120 ℃）, indicating that increasing the Cu content enhanced the conversion of H2. The sample CMA（CP） made by coprecipitation method has a lower CO oxidation activity and selectivity than its counter-parts of mesoporous Cu-Mn-Al2O3 materials[CMA（1：2）], this attributed to the lower surface area of the former and poor interaction of CuO with MnOx.

A Novel, Efficient and Facile Method for the Template Removal from Mesoporous Materials

A new catalytic-oxidation method was adopted to remove the templates from SBA-1 5 and MCM-4 1 me- soporous materials via Fenton-like techniques under microwave irradiation. The mesoporous silica materials were treated with different Fenton agents based on the template＇s property and textural property. The samples were cha- racterized by powder X-ray diffraction（XRD） measurement, N2 adsorption-desorption isotherms, infrared spectro- scopy, 29Si MAS NMR and thermo gravimetric analysis（TGA）. The results reveal that this is an efficient and facile approach to the thorough template-removal from mesoporous silica materials, as well as to offering products with more stable structures, higher BET surface areas, larger pore volumes and larger quantity of silanol groups.

Synthesis and applications of mesoporous Cu-Zn-Al_2O_3 catalyst for dehydrogenation of 2-butanol

A series of mesoporous Cu-Zn-Al2O3 materials have been synthesized at ambient temperature and their structure was characterized by XRD, N2 physical adsorption and TPR techniques. Their catalytic applications for the dehydrogenation of 2-butanol to methyl ethyl ketone （MEK） were evaluated in a fixed-bed flow reactor at atmospheric pressure. It is demonstrated from the XRD patterns that both the as-synthesized samples and calcined samples have the typical XRD patterns of meso-structured materials and the results of N20 chemical adsorption showed that Cu was embedded in the framework of the mesoporous materials and homogeneously dispersed in the mesoporous Cu-Zn-Al2O3 materials. The catalytic activity of 2-butanol dehydrogenation was varied in the order of CZA（10） 〈 CZA（CP） 〈 CZA（20） 〈 CZA（30）; while the selectivity of MEK was increased in the order of CZA（CP） 〈 CZA（10） 〈 CZA（20） 〈CZA（30）.

Investigation of CO and formaldehyde oxidation over mesoporous Ag/Co_3O_4 catalysts

CO and formaldehyde(HCHO)oxidation reactions were investigated over mesoporous Ag/Co3O4 catalysts prepared by one-pot(OP)and impregnation(IM)methods.It was found that the one-pot method was superior to the impregnation method for synthesizing Ag/Co3O4 catalysts with high activity for both reactions.It was also found that the catalytic behavior of mesoporous Co3O4 and Ag/Co3O4 catalysts for the both reactions was different.And the addition of silver on mesoporous Co3O4 did not always enhance the catalytic activity of final catalyst for CO oxidation at room temperature(20 C),but could significantly improve the catalytic activity of final catalyst for HCHO oxidation at low temperature(90 C).The high surface area,uniform pore structure and the pretty good dispersion degree of the silver particle should be responsible for the excellent low-temperature CO oxidation activity.However,for HCHO oxidation,the addition of silver played an important role in the activity enhancement.And the silver particle size and the reducibility of Co3O4 should be indispensable for the high activity of HCHO oxidation at low temperature.

Different Synthesis Methods for Ordered Mesoporous Silicas And Their Characteristics Comparison

Ordered mesoporous silica were synthesized under different conditions:hydrothermal synthesis in basic medium,room temperature synthesis in acid medium and sol gel synthesis in neutral medium,and pore structure,specific surface area and pore size distribution of samples were studied and compared in detail by means of SAXRD,HRTEM,BET,FT IR.The results show that the mesopores in the samples obtained via above three methods all possess uniform hexagonal arrays in short range.Mesoporous silica obtained in acid medium possesses narrow pore size distribution centered around 1.24nm with specific surface area of 1220 m 2·g -1 ;Mesoporous silica obtained in basic medium by hydrothermal synthesis at 160℃ possesses narrow pore size distribution centered around 1.90nm with specific surface area of 542.8 m 2·g -1 ;and mesoporous silica obtained in neutral medium by sol gel synthesis possesses broader pore size distribution centered around 4.01nm,specific surface area of 485.0 m 2·g -1 .Therefore,ordered mesoporous silicas with different pore sizes can be prepared using various synthetic methods and conditions.After heat treatment,Si O Si bending vibration strengthens and the adsorption peak of asymmetrical Si O Si stretching vibration broadens,and the crosslinking and condensation reaction of silica skeleton strengthen, meanwhile the amount of active centers of hydroxyl group on the surface of mesopores may be influenced,thus chemical assembly activity of mesopores may also be influenced.

Carbon dioxide reforming of methane over mesoporous nickel aluminate/γ-alumina composites

A series of xNiAl2O4/γ-Al2O3composites with various Ni contents have been prepared via one-step partial hydrolysis of metal nitrate salts in the absence of surfactants and used for carbon dioxide reforming of methane. The characterization results demonstrated that the NiAl2O4/γ-Al2O3materials possessed mesoporous structures of uniform pore sizes; and the Ni2+ions were completely reacted with alumina to NiAl2O4spinel in the matrices using N2sorption, XRD, TEM, and XPS. The NiAl2O4/γ-Al2O3materials exhibited excellent catalytic properties and superior long-term stability for carbon dioxide reforming of methane. The effects of Ni content on the intrinsic activities and the amounts of coke disposition of the xNiAl2O4/γ-Al2O3catalysts were discussed in detail for the carbon dioxide reforming of methane. The results revealed that the Ni particle sizes did not affect the intrinsic activity of metallic Ni, but smaller Ni particles could reduce the rate of coke deposition. ? 2016 Science Press