Two multidentate ligands 2,9-di[6＇-（2″-hydroxyl-3″-methoxyphenyl）-n-2＇,5＇-diazahexyl]-1,10-phenanthroline（LA）and 2,9-di（6＇-α-phenol-n-2＇,5＇-diazahexyl）-1,10-phenanthroline（LB）were synthesized and full...Two multidentate ligands 2,9-di[6＇-（2″-hydroxyl-3″-methoxyphenyl）-n-2＇,5＇-diazahexyl]-1,10-phenanthroline（LA）and 2,9-di（6＇-α-phenol-n-2＇,5＇-diazahexyl）-1,10-phenanthroline（LB）were synthesized and fully characterized.Protonation of the ligands and the stability of the complexes of the ligands with divalent metal ions were investigated.The trinuclear metal complexes [Cu（Ⅱ）and Zn（Ⅱ）] of the ligands were studied,as catalysts,for the transphosphorylation of the RNA-model substrate 2-hydroxypropyl-p-nitrophenyl phosphate（HPNP）.The second-order rate constants of HPNP-hydrolysis catalyzed by M3L and M3LH-1 were obtained,which indicated that Zn3LBH-1 was the most efficient catalyst among them.The proposed mechanisms included the activation of the substrate via binding to the metal ions and intramolecular nucleophilic attack by the deprotonated C2-hydroxyl of HPNP.展开更多
Highly active calcium chloride（CaCl2） doped Zn-Co^Ⅲdouble metal-cyanide（Ca-DMC） catalysts were firstly reported.Ca-DMCs presented a very higher polymer yield（54 kg polymer/g catalyst） at relative low temperatur...Highly active calcium chloride（CaCl2） doped Zn-Co^Ⅲdouble metal-cyanide（Ca-DMC） catalysts were firstly reported.Ca-DMCs presented a very higher polymer yield（54 kg polymer/g catalyst） at relative low temperature（80-115℃） toward ringopening polymerization（ROP） of propylene oxide（PO） than did DMC catalysts without modification.展开更多
In the course of investigating the catalytic behavior of metal complexes for ring opening metathesis polymerization of cycloolefins, metathesis, hydroformylation and selective hydrogenation of olefins experimental res...In the course of investigating the catalytic behavior of metal complexes for ring opening metathesis polymerization of cycloolefins, metathesis, hydroformylation and selective hydrogenation of olefins experimental results time and again indicate the presence of effects of macromolecular supports - the utilization of macromolecular supports increases obviously the activity, selectivity, and stability of the catalysts and so as to increase the conversion of substrates, yields of reactions, properties of formed polymers and so on. Discussed these effects on the basis of the authors' experiments. (Author abstract) 18 Refs.展开更多
Two types of small iron clusters supported on γ-Al2O3-RT（dehydroxylated at room temperature） and γ-Al2O3-800 （dehydroxylated at 800 ℃） were prepared by solvated metal atom impregnation （SMAI） techniques. The ...Two types of small iron clusters supported on γ-Al2O3-RT（dehydroxylated at room temperature） and γ-Al2O3-800 （dehydroxylated at 800 ℃） were prepared by solvated metal atom impregnation （SMAI） techniques. The iron atom precursor complex, bis（toluene）iron（0） formed in the metal atom reactor, was impregnated into γ-Al2O3 having different concentrations of surface hydroxyl groups to study the effect of surface hydroxylation on the crucial stage of iron cluster formation. Catalysts prepared in this way were characterized by TEM, Mǒssbauer, and chemisorption measurements, and the results show that higher concentration of surface hydroxyl groups of γ-Al2O3-RT favors the formation of more positively charged supported iron cluster Fen/γ-Al2O3-RT, and the lower concentration of surface hydroxyl groups of γ-Al2O3-800 favors the formation of basically neutral supported iron cluster Fen/γ-Al2O3-800. The measured results also indicate that the higher concentration of surface hydroxyl groups causes the rapid decomposition of precursor complex, bis（toluene）iron（0）, and favors the formation of relatively large iron cluster. Consequently, these two types of catalysts show different catalytic properties in Fischer-Tropsch reaction. The catalytic pattern of Fen/γ-Al2O3-RT in F-T reaction is similar to that of the unreduced γ-Fe2O3 and that of Fen/γ-Al2O3-800 is similar to that of the reduced α-Fe2O3.展开更多
A new α-diimine ligand 1a, bis[N,N′-（4-tert-butyl-2,6-dimethylphenyl）imino]-2,3-butanediylidene and its corresponding Ni（II） complex 2a, {bis[N,N′-（4-tert-butyl-2,6-dimethylphenyl）imino]-2,3-butanediylidene}d...A new α-diimine ligand 1a, bis[N,N′-（4-tert-butyl-2,6-dimethylphenyl）imino]-2,3-butanediylidene and its corresponding Ni（II） complex 2a, {bis[N,N′-（4-tert-butyl-2,6-dimethylphenyl）imino]-2,3-butanediylidene}dibromo- nickel were successfully synthesized, and characterized by 1H NMR, 13C NMR, Fourier transform infrared spectroscope（FTIR）, elemental analysis and X-ray photoelectron spectroscopy（XPS）. α-Diimine ligand 1b, bis[N,N′-（2,6- dimethylphenyl）imino]-2,3-butanediylidene and its corresponding Ni（II） complex 2b, {bis[N,N′-（2,6-dimethyl- phenyl）imino]-2,3-butanediylidene}dibromonickel were also synthesized and characterized for comparison. The pre-catalyst 2a with sterically bulky, electron-donating group tert-butyl, activated by diethylaluminum chloride （DEAC） and tested in the polymerization of ethylene, was very highly active[2.01×107 g PE/（mol Ni？h？0.1 MPa）] and led to a very highly branched polyethylene（ca. 35―103 branches/1000 C）. The state of the polyethylene obtained varied from plastic, elastomer polymers to the oil-like hyperbranched polymers.展开更多
基金Supported by the National Natural Science Foundation of China(Nos.20371028and20671052).
文摘Two multidentate ligands 2,9-di[6＇-（2″-hydroxyl-3″-methoxyphenyl）-n-2＇,5＇-diazahexyl]-1,10-phenanthroline（LA）and 2,9-di（6＇-α-phenol-n-2＇,5＇-diazahexyl）-1,10-phenanthroline（LB）were synthesized and fully characterized.Protonation of the ligands and the stability of the complexes of the ligands with divalent metal ions were investigated.The trinuclear metal complexes [Cu（Ⅱ）and Zn（Ⅱ）] of the ligands were studied,as catalysts,for the transphosphorylation of the RNA-model substrate 2-hydroxypropyl-p-nitrophenyl phosphate（HPNP）.The second-order rate constants of HPNP-hydrolysis catalyzed by M3L and M3LH-1 were obtained,which indicated that Zn3LBH-1 was the most efficient catalyst among them.The proposed mechanisms included the activation of the substrate via binding to the metal ions and intramolecular nucleophilic attack by the deprotonated C2-hydroxyl of HPNP.
基金the financial supports of the National Science Foundation of the People's Republic of China(No.20704034)Provincial Natural Science Foundation of Zhejiang(No.Y4090047)
文摘Highly active calcium chloride（CaCl2） doped Zn-Co^Ⅲdouble metal-cyanide（Ca-DMC） catalysts were firstly reported.Ca-DMCs presented a very higher polymer yield（54 kg polymer/g catalyst） at relative low temperature（80-115℃） toward ringopening polymerization（ROP） of propylene oxide（PO） than did DMC catalysts without modification.
基金The project was supported by the National Natural Science Foundation of China, "Macromolecular ligand effects of catalytic system for ring opening metathesis polymerization of dicydopentadiene" (Approval No. 29474160) & "Polymeric metal complex catalysts
文摘In the course of investigating the catalytic behavior of metal complexes for ring opening metathesis polymerization of cycloolefins, metathesis, hydroformylation and selective hydrogenation of olefins experimental results time and again indicate the presence of effects of macromolecular supports - the utilization of macromolecular supports increases obviously the activity, selectivity, and stability of the catalysts and so as to increase the conversion of substrates, yields of reactions, properties of formed polymers and so on. Discussed these effects on the basis of the authors' experiments. (Author abstract) 18 Refs.
文摘Two types of small iron clusters supported on γ-Al2O3-RT（dehydroxylated at room temperature） and γ-Al2O3-800 （dehydroxylated at 800 ℃） were prepared by solvated metal atom impregnation （SMAI） techniques. The iron atom precursor complex, bis（toluene）iron（0） formed in the metal atom reactor, was impregnated into γ-Al2O3 having different concentrations of surface hydroxyl groups to study the effect of surface hydroxylation on the crucial stage of iron cluster formation. Catalysts prepared in this way were characterized by TEM, Mǒssbauer, and chemisorption measurements, and the results show that higher concentration of surface hydroxyl groups of γ-Al2O3-RT favors the formation of more positively charged supported iron cluster Fen/γ-Al2O3-RT, and the lower concentration of surface hydroxyl groups of γ-Al2O3-800 favors the formation of basically neutral supported iron cluster Fen/γ-Al2O3-800. The measured results also indicate that the higher concentration of surface hydroxyl groups causes the rapid decomposition of precursor complex, bis（toluene）iron（0）, and favors the formation of relatively large iron cluster. Consequently, these two types of catalysts show different catalytic properties in Fischer-Tropsch reaction. The catalytic pattern of Fen/γ-Al2O3-RT in F-T reaction is similar to that of the unreduced γ-Fe2O3 and that of Fen/γ-Al2O3-800 is similar to that of the reduced α-Fe2O3.
基金supported by the National Key Research and Development Program of China(No.2021YFA1500703 to Ganglong Cui)Distinguished Professorship of Chang Jiang Scholars of Ministry of Education of China(Ganglong Cui)+1 种基金the Fundamental Research Funds for the Central Universitiesthe National Natural Science Foundation of China(No.22233001 to Ganglong Cui,No.22003043 to Xiang-Yang Liu)。
基金Supported by the National Natural Science Foundation of China(No.20964003)
文摘A new α-diimine ligand 1a, bis[N,N′-（4-tert-butyl-2,6-dimethylphenyl）imino]-2,3-butanediylidene and its corresponding Ni（II） complex 2a, {bis[N,N′-（4-tert-butyl-2,6-dimethylphenyl）imino]-2,3-butanediylidene}dibromo- nickel were successfully synthesized, and characterized by 1H NMR, 13C NMR, Fourier transform infrared spectroscope（FTIR）, elemental analysis and X-ray photoelectron spectroscopy（XPS）. α-Diimine ligand 1b, bis[N,N′-（2,6- dimethylphenyl）imino]-2,3-butanediylidene and its corresponding Ni（II） complex 2b, {bis[N,N′-（2,6-dimethyl- phenyl）imino]-2,3-butanediylidene}dibromonickel were also synthesized and characterized for comparison. The pre-catalyst 2a with sterically bulky, electron-donating group tert-butyl, activated by diethylaluminum chloride （DEAC） and tested in the polymerization of ethylene, was very highly active[2.01×107 g PE/（mol Ni？h？0.1 MPa）] and led to a very highly branched polyethylene（ca. 35―103 branches/1000 C）. The state of the polyethylene obtained varied from plastic, elastomer polymers to the oil-like hyperbranched polymers.
