To improve the performance of a metal ion plasma jet in vacuum discharge, an anode-insulated cone-cylinder electrode with insulating sleeve is proposed in this paper. Discharge characteristics and generation character...To improve the performance of a metal ion plasma jet in vacuum discharge, an anode-insulated cone-cylinder electrode with insulating sleeve is proposed in this paper. Discharge characteristics and generation characteristics of plasma of the electrode are investigated, effects of diameter of insulating sleeve, variety of cathode material and length of the insulating sleeve on characteristics of metal ion plasma jet are discussed. Results indicate that a directional and steady plasma jet is formed by using the novel electrode with insulating sleeve under high vacuum conditions. Moreover, the properties of metal ion plasma jet are improved by using the aluminum cathode and thin and long insulating sleeve. The study provides strong support for research of vacuum metal ion plasma thruster and ion implantation technology.展开更多
Walled-off pancreatic necrosis and a pancreatic abscess are the most severe complications of acute pancreatitis. Surgery in such critically ill patients is often associated with significant morbidity and mortality wit...Walled-off pancreatic necrosis and a pancreatic abscess are the most severe complications of acute pancreatitis. Surgery in such critically ill patients is often associated with significant morbidity and mortality within the first few weeks after the onset of symptoms. Minimal invasive approaches with high success and low mortality rates are therefore of considerable interest. Endoscopic therapy has the potential to offer safe and effective alternative treatment. We report here on 3 consecutive patients with infected walled-off pancreatic necrosis and 1 patient with a pancreatic abscess who underwent direct endoscopic necrosectomy 19-21 d after the onset of acute pancreatitis. The infected pancreatic necrosis or abscess was punctured transluminally with a cystostome and, after balloon dilatation, a non-covered self-expanding biliary metal stent was placed into the necrotic cavity. Following stent deployment, a nasobiliary pigtail catheter was placed into the cavity to ensure continuous irrigation. After 5-7 d, the metal stent was removed endoscopically and the necrotic cavity was entered with a therapeutic gastroscope. Endoscopic debridement was performed via the simultaneous application of a high-flow water-jet system; using a flush knife, a Dormia basket, and hot biopsy forceps. The transluminal endotherapy was repeated 2-5 times daily during the next 10 d. Supportive care included parenteral antibiotics and jejunal feeding. All patients improved dramatically and with resolution of their septic conditions; 3 patients were completely cured without any further complications or the need for surgery. One patient died from a complication of prolonged ventilation severe bilateral pneumonia, not related to the endoscopic procedure. No procedure related complications were observed. Transluminal endoscopic necrosectomy with temporary application of a self-expanding metal stent and a high-flow water-jet system shows promise for enhancing the potential of this endoscopic approach in patients with walled-off pancreatic necrosis and/or a pancreatic abscess.展开更多
In a pulsed vacuum discharge,the ejection performance of a metal plasma jet can be effectively improved by preventing charged particles from moving to the anode.In this paper,the effects of resistance and capacitance ...In a pulsed vacuum discharge,the ejection performance of a metal plasma jet can be effectively improved by preventing charged particles from moving to the anode.In this paper,the effects of resistance and capacitance on the anode side on the discharge characteristics and the generation characteristics of plasma jet are investigated.Results show that the existence of a resistor on the anode side can increase the anode potential,thereby preventing charged particles from entering the anode and promoting the ejection of charged particles along the axis of the insulating sleeve nozzle.The application of a capacitor on the anode side can not only absorb electrons at the initial stage of discharge,increasing the peak value of the cathode hump potential,but also prevent charged particles from moving to the anode,thereby improving the ejection performance of the plasma jet.In addition,the use of a larger resistance and a smaller capacitance can improve the blocking effect on charged particles and further improve the ejection performance of the plasma jet.Results of this study will provide a reference for the improvement of the ejection performance of plasma jets and their applications.展开更多
Full factorial design of experiments was developed in order to investigate the effects of jet pressure, abrasive mixing rate, cutting feed, and plate thickness upon three response variables, surface finish of cutting ...Full factorial design of experiments was developed in order to investigate the effects of jet pressure, abrasive mixing rate, cutting feed, and plate thickness upon three response variables, surface finish of cutting wear zone, percentage proportion of striation free area, and maximum width of cut. The set of sixteen experiments was performed on each of the following two ductile materials： AISI 4340 （high strength low alloy steel, hardened to 49HRc） and Aluminum 2219. Analysis of Variance （ANOVA） was performed on experimental data in order to determine the significance of effects of different parameters on the performance measures. It was found that cutting feed and thickness were highly influential parameters, while abrasive mixing rate is influential upon surface roughness only. Strong interaction was found between jet pressure and workpiece material. Multi-criteria numerical optimization was performed in order to simultaneously maximize/minimize different combinations of performance measures.展开更多
基金supported by National Natural Science Foundation of China(No.51577011)
文摘To improve the performance of a metal ion plasma jet in vacuum discharge, an anode-insulated cone-cylinder electrode with insulating sleeve is proposed in this paper. Discharge characteristics and generation characteristics of plasma of the electrode are investigated, effects of diameter of insulating sleeve, variety of cathode material and length of the insulating sleeve on characteristics of metal ion plasma jet are discussed. Results indicate that a directional and steady plasma jet is formed by using the novel electrode with insulating sleeve under high vacuum conditions. Moreover, the properties of metal ion plasma jet are improved by using the aluminum cathode and thin and long insulating sleeve. The study provides strong support for research of vacuum metal ion plasma thruster and ion implantation technology.
文摘Walled-off pancreatic necrosis and a pancreatic abscess are the most severe complications of acute pancreatitis. Surgery in such critically ill patients is often associated with significant morbidity and mortality within the first few weeks after the onset of symptoms. Minimal invasive approaches with high success and low mortality rates are therefore of considerable interest. Endoscopic therapy has the potential to offer safe and effective alternative treatment. We report here on 3 consecutive patients with infected walled-off pancreatic necrosis and 1 patient with a pancreatic abscess who underwent direct endoscopic necrosectomy 19-21 d after the onset of acute pancreatitis. The infected pancreatic necrosis or abscess was punctured transluminally with a cystostome and, after balloon dilatation, a non-covered self-expanding biliary metal stent was placed into the necrotic cavity. Following stent deployment, a nasobiliary pigtail catheter was placed into the cavity to ensure continuous irrigation. After 5-7 d, the metal stent was removed endoscopically and the necrotic cavity was entered with a therapeutic gastroscope. Endoscopic debridement was performed via the simultaneous application of a high-flow water-jet system; using a flush knife, a Dormia basket, and hot biopsy forceps. The transluminal endotherapy was repeated 2-5 times daily during the next 10 d. Supportive care included parenteral antibiotics and jejunal feeding. All patients improved dramatically and with resolution of their septic conditions; 3 patients were completely cured without any further complications or the need for surgery. One patient died from a complication of prolonged ventilation severe bilateral pneumonia, not related to the endoscopic procedure. No procedure related complications were observed. Transluminal endoscopic necrosectomy with temporary application of a self-expanding metal stent and a high-flow water-jet system shows promise for enhancing the potential of this endoscopic approach in patients with walled-off pancreatic necrosis and/or a pancreatic abscess.
基金supported by the Fundamental Research Funds for the Central Universities(No.2019YJS187)National Natural Science Foundation of China(No.51577011)。
文摘In a pulsed vacuum discharge,the ejection performance of a metal plasma jet can be effectively improved by preventing charged particles from moving to the anode.In this paper,the effects of resistance and capacitance on the anode side on the discharge characteristics and the generation characteristics of plasma jet are investigated.Results show that the existence of a resistor on the anode side can increase the anode potential,thereby preventing charged particles from entering the anode and promoting the ejection of charged particles along the axis of the insulating sleeve nozzle.The application of a capacitor on the anode side can not only absorb electrons at the initial stage of discharge,increasing the peak value of the cathode hump potential,but also prevent charged particles from moving to the anode,thereby improving the ejection performance of the plasma jet.In addition,the use of a larger resistance and a smaller capacitance can improve the blocking effect on charged particles and further improve the ejection performance of the plasma jet.Results of this study will provide a reference for the improvement of the ejection performance of plasma jets and their applications.
文摘Full factorial design of experiments was developed in order to investigate the effects of jet pressure, abrasive mixing rate, cutting feed, and plate thickness upon three response variables, surface finish of cutting wear zone, percentage proportion of striation free area, and maximum width of cut. The set of sixteen experiments was performed on each of the following two ductile materials： AISI 4340 （high strength low alloy steel, hardened to 49HRc） and Aluminum 2219. Analysis of Variance （ANOVA） was performed on experimental data in order to determine the significance of effects of different parameters on the performance measures. It was found that cutting feed and thickness were highly influential parameters, while abrasive mixing rate is influential upon surface roughness only. Strong interaction was found between jet pressure and workpiece material. Multi-criteria numerical optimization was performed in order to simultaneously maximize/minimize different combinations of performance measures.
