This study was carried out to understand the long-term effect of organic waste treatment on the fate of heavy metals originated from the organic wastes, together with examination of changes in soil properties. For thi...This study was carried out to understand the long-term effect of organic waste treatment on the fate of heavy metals originated from the organic wastes, together with examination of changes in soil properties. For this, the soils received three different organic wastes (municipal sewage sludge, alcohol fermentation processing sludge, pig manure compost) in three different rates (12.5, 25, 50 ton/ha/yr) for 7 years (1994 - 2000) were used. To see the long-term effect, plant growth study and soil examination were conducted twice in 2000 and 2010, respectively. There was no additional treatment of organic wastes for post ten years after ceasing organic waste treatment for seven years. Soil examination conducted in 2010 showed decreases in soil pH, EC, total nitrogen, organic matter, available phosphorus, exchangeable cations and heavy metal contents in all soils received organic wastes compared to the results obtained in 2000. Speciation of heavy metals in soil through sequential extraction showed that organically bound Cu was the dominant species in all treatment and exchangeable Cu was increased in the plots treated with municipal sewage sludge and alcohol fermentation processing sludge. organically bound Ni increased from 25% - 30% to 32% - 45% in 2010 inall treatment while Pb showed increase in carbonate form in all treatments. Zn existed mainly as sulfide and residual forms, showing increases in organically bound form in all treatment during post ten years.展开更多
We present here our investigations of the features of focused electron beam transport in free space at elevated pressures of a few pascals.We have explored the effect of the beam accelerating voltage,operating gas pre...We present here our investigations of the features of focused electron beam transport in free space at elevated pressures of a few pascals.We have explored the effect of the beam accelerating voltage,operating gas pressure,and magnetic focusing upon the trajectory of beam electrons in the crossover region,in particular on the beam convergence and divergence angles.It is shown that for the forevacuum pressure range of 2-5 Pa explored,a distinctive feature of the propagation of a focused electron beam with a current of up to 20 mA at an accelerating voltage of 10-20 kV is the difference in the angles of convergence(before the focus)and divergence(after the focus).Whereas at a low pressure of 2 Pa the divergence angle is smaller than the convergence angle,as the pressure increases the divergence angle increases and for pressures greater than 5 Pa the divergence angle is greater than the convergence angle.The results obtained were used in experiments on electron beam transport through a long narrow metal tube with a diameter of 5.8-9.2 mm and length of 10-30 cm.We show that for a 30 cm long tube of 7.5 mm diameter,the focused beam transmission can exceed 70%.展开更多
A three-stage theoretical model is presented herein to predict the perforation of a thick metallic plate struck normally by a long rod at high velocities. The model is suggested on the basis of the assumption that the...A three-stage theoretical model is presented herein to predict the perforation of a thick metallic plate struck normally by a long rod at high velocities. The model is suggested on the basis of the assumption that the perforation of a thick metallic plate by a long rod can be divided into three stages:(1) initial penetration;(2) plug formation and (3) plug slipping and separation. Various analytical equations are derived which can be employed to predict the ballistic limit, residual velocity and residual length of the long rod. It is demonstrated that the present model predictions are in good agreement with available experimental results for the perforation of finite steel targets struck normally by steel as well as tungsten alloy long rods at high velocities. It is also demonstrated that the dynamic maximum shear stress of a plate material has strong effect on plug formation and plug thickness which, in turn, exerts considerable influence on the residual velocities and lengths of a long rod at impact velocities just above the ballistic limit.展开更多
The hybrid metal-organic framework [（CH3）2NH2]Fe（HCOO）3 with a perovskite-like structure exhibits a variety of unusual magnetic behaviors at low temperatures. While the long-distance super-exchange through the Fe-...The hybrid metal-organic framework [（CH3）2NH2]Fe（HCOO）3 with a perovskite-like structure exhibits a variety of unusual magnetic behaviors at low temperatures. While the long-distance super-exchange through the Fe-（Y-CH-O- Fe exchange path leads to a canted antiferromagnetic ordering at TN - 19 K, a second transition of magnetic blocking develops at TB- 9 K. The stair-shaped magnetization hysteresis loops below TB resemble the behaviors of resonant quantum tunneling of magnetization in single-molecular quantum magnets. Moreover, the magnetic relaxation also exhibits several features of resonant quantum relaxation, such as the exponential law with a single characteristic relaxation time, and the nonmonotonic dependence of relaxation rate on the applied magnetic field with a much faster relaxation around the resonant fields. The origin of quantum tunneling behaviors in the [（CH3）2NH2]Fe（HCOO）3 metal-organic framework is discussed in terms of magnetic phase separation due to the modification of hydrogen bonding on the long-distance super-exchange interaction.展开更多
Long afterglow phosphors MAl2O4：Eu^2＋ , Dy^3＋ （M = Ca, Sr, Ba） were synthesized by microemulsion method, and their crystal structure and luminescent properties were compared and investigated. XRD patterns of samp...Long afterglow phosphors MAl2O4：Eu^2＋ , Dy^3＋ （M = Ca, Sr, Ba） were synthesized by microemulsion method, and their crystal structure and luminescent properties were compared and investigated. XRD patterns of samples indicate that phosphors CaAl2O4：Eu^2＋, Dy^3＋ and SrAl2O4 ： Eu^2＋, Dy^3＋ are with monoelinie crystal structure and phosphor BaAl2O4：Eu^2＋ , Dy^3＋ is with hexagonal crystal structure. The wide range of excitation spectrum of phosphors MAl2O4： Eu^2 ＋ , Dy^3＋ （M = Ca,Sr, Ba） indicates that the luminescent materials can he excited by light from ultraviolet ray to visible light and the maximum emission wavelength of phosphors MAl2O4：Eu^2＋ , Dy^3＋ （M = Ca, Sr, Ba） is found mainly at λem of 440 nm （M = Ca）, 520 nm （M = Sr） and 496 nm （M = Ba） respectively, the corresponding colors of emission light are blue, green and eyna-green respectively. The afterglow decay tendency of phosphors can he summarized as three processes： initial rapid decay, intermediate transitional decay and very long slow decay. Afterglow decay curves coincide with formula I = At^ - n, and the sequence of afterglow intensity and time is Sr 〉 Ca 〉 Ba.展开更多
The levels of heavy metals that accumulated in stemwood of mature trees grown for 20 years in a plantation in an abandoned peat quarry in areas that were fertilized with different amounts of domestic sewage sludge(180...The levels of heavy metals that accumulated in stemwood of mature trees grown for 20 years in a plantation in an abandoned peat quarry in areas that were fertilized with different amounts of domestic sewage sludge(180,360,and720 Mg ha-1on a dry basis) were compared with trees grown in a reference nonfertilized area.Included in the study was a hybrid poplar(Populus tremula x Populus tremuloides) developed for use as an energy crop,three local tree species and one introduced tree species.The concentrations of Cd,Cr,Cu,Ni,Pb and Zn in the stemwood of the trees grown in the fertilized and nonfertilized fields were determined,and found to be significantly lower than their respective concentrations in the soil.Cd and Cr were found only in several wood samples at concentrations close to the limits of detection or qualification; therefore,they were not analyzed further.A correlation analysis suggested that 75%of the correlations between the concentrations of heavy metals in the stemwood and the concentrations in the soil were negative.The ability of trees to accumulate the metals from soil in most cases decreased for Cu and Ni; however,the correlations were not as clear for Pb and Zn.The followingsequence for the levels of heavy metals found in the stemwood of the analysed trees was Zn [ Pb [ Ni [ Cu [(Cr,Cd).The results of this study showed that the levels of heavy metals in the studied wood would not exceed the permitted limits of heavy metal pollution in the air and ash when used for energy production.展开更多
文摘This study was carried out to understand the long-term effect of organic waste treatment on the fate of heavy metals originated from the organic wastes, together with examination of changes in soil properties. For this, the soils received three different organic wastes (municipal sewage sludge, alcohol fermentation processing sludge, pig manure compost) in three different rates (12.5, 25, 50 ton/ha/yr) for 7 years (1994 - 2000) were used. To see the long-term effect, plant growth study and soil examination were conducted twice in 2000 and 2010, respectively. There was no additional treatment of organic wastes for post ten years after ceasing organic waste treatment for seven years. Soil examination conducted in 2010 showed decreases in soil pH, EC, total nitrogen, organic matter, available phosphorus, exchangeable cations and heavy metal contents in all soils received organic wastes compared to the results obtained in 2000. Speciation of heavy metals in soil through sequential extraction showed that organically bound Cu was the dominant species in all treatment and exchangeable Cu was increased in the plots treated with municipal sewage sludge and alcohol fermentation processing sludge. organically bound Ni increased from 25% - 30% to 32% - 45% in 2010 inall treatment while Pb showed increase in carbonate form in all treatments. Zn existed mainly as sulfide and residual forms, showing increases in organically bound form in all treatment during post ten years.
文摘We present here our investigations of the features of focused electron beam transport in free space at elevated pressures of a few pascals.We have explored the effect of the beam accelerating voltage,operating gas pressure,and magnetic focusing upon the trajectory of beam electrons in the crossover region,in particular on the beam convergence and divergence angles.It is shown that for the forevacuum pressure range of 2-5 Pa explored,a distinctive feature of the propagation of a focused electron beam with a current of up to 20 mA at an accelerating voltage of 10-20 kV is the difference in the angles of convergence(before the focus)and divergence(after the focus).Whereas at a low pressure of 2 Pa the divergence angle is smaller than the convergence angle,as the pressure increases the divergence angle increases and for pressures greater than 5 Pa the divergence angle is greater than the convergence angle.The results obtained were used in experiments on electron beam transport through a long narrow metal tube with a diameter of 5.8-9.2 mm and length of 10-30 cm.We show that for a 30 cm long tube of 7.5 mm diameter,the focused beam transmission can exceed 70%.
文摘A three-stage theoretical model is presented herein to predict the perforation of a thick metallic plate struck normally by a long rod at high velocities. The model is suggested on the basis of the assumption that the perforation of a thick metallic plate by a long rod can be divided into three stages:(1) initial penetration;(2) plug formation and (3) plug slipping and separation. Various analytical equations are derived which can be employed to predict the ballistic limit, residual velocity and residual length of the long rod. It is demonstrated that the present model predictions are in good agreement with available experimental results for the perforation of finite steel targets struck normally by steel as well as tungsten alloy long rods at high velocities. It is also demonstrated that the dynamic maximum shear stress of a plate material has strong effect on plug formation and plug thickness which, in turn, exerts considerable influence on the residual velocities and lengths of a long rod at impact velocities just above the ballistic limit.
基金supported by the National Natural Science Foundation of China(Grant Nos.11227405,51371192,and 51371193)the Chinese Academy of Sciences(Grant No.XDB07030200)
文摘The hybrid metal-organic framework [（CH3）2NH2]Fe（HCOO）3 with a perovskite-like structure exhibits a variety of unusual magnetic behaviors at low temperatures. While the long-distance super-exchange through the Fe-（Y-CH-O- Fe exchange path leads to a canted antiferromagnetic ordering at TN - 19 K, a second transition of magnetic blocking develops at TB- 9 K. The stair-shaped magnetization hysteresis loops below TB resemble the behaviors of resonant quantum tunneling of magnetization in single-molecular quantum magnets. Moreover, the magnetic relaxation also exhibits several features of resonant quantum relaxation, such as the exponential law with a single characteristic relaxation time, and the nonmonotonic dependence of relaxation rate on the applied magnetic field with a much faster relaxation around the resonant fields. The origin of quantum tunneling behaviors in the [（CH3）2NH2]Fe（HCOO）3 metal-organic framework is discussed in terms of magnetic phase separation due to the modification of hydrogen bonding on the long-distance super-exchange interaction.
文摘Long afterglow phosphors MAl2O4：Eu^2＋ , Dy^3＋ （M = Ca, Sr, Ba） were synthesized by microemulsion method, and their crystal structure and luminescent properties were compared and investigated. XRD patterns of samples indicate that phosphors CaAl2O4：Eu^2＋, Dy^3＋ and SrAl2O4 ： Eu^2＋, Dy^3＋ are with monoelinie crystal structure and phosphor BaAl2O4：Eu^2＋ , Dy^3＋ is with hexagonal crystal structure. The wide range of excitation spectrum of phosphors MAl2O4： Eu^2 ＋ , Dy^3＋ （M = Ca,Sr, Ba） indicates that the luminescent materials can he excited by light from ultraviolet ray to visible light and the maximum emission wavelength of phosphors MAl2O4：Eu^2＋ , Dy^3＋ （M = Ca, Sr, Ba） is found mainly at λem of 440 nm （M = Ca）, 520 nm （M = Sr） and 496 nm （M = Ba） respectively, the corresponding colors of emission light are blue, green and eyna-green respectively. The afterglow decay tendency of phosphors can he summarized as three processes： initial rapid decay, intermediate transitional decay and very long slow decay. Afterglow decay curves coincide with formula I = At^ - n, and the sequence of afterglow intensity and time is Sr 〉 Ca 〉 Ba.
文摘The levels of heavy metals that accumulated in stemwood of mature trees grown for 20 years in a plantation in an abandoned peat quarry in areas that were fertilized with different amounts of domestic sewage sludge(180,360,and720 Mg ha-1on a dry basis) were compared with trees grown in a reference nonfertilized area.Included in the study was a hybrid poplar(Populus tremula x Populus tremuloides) developed for use as an energy crop,three local tree species and one introduced tree species.The concentrations of Cd,Cr,Cu,Ni,Pb and Zn in the stemwood of the trees grown in the fertilized and nonfertilized fields were determined,and found to be significantly lower than their respective concentrations in the soil.Cd and Cr were found only in several wood samples at concentrations close to the limits of detection or qualification; therefore,they were not analyzed further.A correlation analysis suggested that 75%of the correlations between the concentrations of heavy metals in the stemwood and the concentrations in the soil were negative.The ability of trees to accumulate the metals from soil in most cases decreased for Cu and Ni; however,the correlations were not as clear for Pb and Zn.The followingsequence for the levels of heavy metals found in the stemwood of the analysed trees was Zn [ Pb [ Ni [ Cu [(Cr,Cd).The results of this study showed that the levels of heavy metals in the studied wood would not exceed the permitted limits of heavy metal pollution in the air and ash when used for energy production.
