Preparation and properties of transition metal nitrides caged in N-doped hollow porous carbon sphere for oxygen reduction reaction

A series of transition metal nitrides(MxNy,M=Fe,Co,Ni)nanoparticle(NP)composites caged in N-doped hollow porous carbon sphere(NHPCS)were prepared by impregnation and heat treatment methods.These composites combine the high catalytic activity of nitrides and the high-efficiency mass transfer characteristics of NHPCS.The oxygen reduction reaction results indicate that Fe2N/NHPCS has the synergistic catalytic performance of higher onset potential(0.96 V),higher electron transfer number(~4)and higher limited current density(1.4 times as high as that of commercial Pt/C).In addition,this material is implemented as the air catalyst for zinc−air battery that exhibits considerable specific capacity(795.1 mA·h/g)comparable to that of Pt/C,higher durability and maximum power density(173.1 mW/cm2).

Regulating non-precious transition metal nitrides bifunctional electrocatalysts through surface/interface nanoengineering for air-cathodes of Zn-air batteries

Zn-air batteries(ZABs),especially the secondary batteries,have engrossed a great interest because of its high specific energy,economical and high safety.However,due to the insufficient activity and stability of bifunctional electrocatalysts for air-cathode oxygen reduction reaction(ORR)and oxygen evolution reaction(OER)processes,the practical application of rechargeable ZABs is seriously hindered.In the effort of developing high active,stable and cost-effective electrocatalysts,transition metal nitrides(TMNs)have been regarded as the candidates due to their high conductivity,strong corrosion-resistance,and bifunctional catalytic performance.In this paper,the research progress in TMNs-based material as ORR and OER electrocatalysts for ZABs is discussed with respect to their synthesis,chemical/physical characterization,and performance validation/optimization.The surface/interface nanoengineering strategies such as defect engineering,support binding,heteroatom introduction,crystal plane orientation,interface construction and small size effect,the physical and chemical properties of TMNs-based electrocatalysts are emphasized with respect to their structures/morphologies,composition,electrical conductivity,specific surface area,chemical stability and corrosion resistance.The challenges of TMNs-based materials as bifunctional air-cathode electrocatalysts in practical application are evaluated,and numerous research guidelines to solve these problems are put forward for facilitating further research and development.

Origin of superior pseudocapacitive mechanism of transition metal nitrides

Large-scale deployment of Internet of Things (IoT),a revolutionary innovation for a better world,is hampered by the limitation of energy self-sufficiency.Constructing transition metal nitride (TMN)-based micro-supercapacitors is a possible solution by taking advantage of the high conductivity,large specific capacitance,and large tap density of the materials.However,the pseudocapacitive storage mechanism of TMNs is still unclear consequently impeding the design of microdevices.Herein,the functions and mechanism of TMNs with different metal oxynitride (TMNO_(x)) concentrations in pseudocapacitive electrodes are investigated systematically by in situ Raman scattering,ex situ X-ray photoelectron spectroscopy,as well as ion isolation and substitution cyclic voltammetry.It is found that the specific capacitances of TMNs depend on the TMNO_(x) concentrations and the N–M–O site is responsible for the large pseudocapacitance via the Faradic reaction between TMNO_(x) and OH^(-).Our study elucidates the mechanism pertaining to pseudocapacitive charge storage of TMNs and provides insights into the design and optimization of TMNO_(x) as well as other electrode materials for pseudocapacitors.

The highly selective catalytic hydrogenation of CO_(2)to CO over transition metal nitrides

Three transition metal-like facet centered cubic structured transition metal nitrides,γ-Mo_(2)N,β-W_(2)N andδ-NbN,are synthesized and applied in the reaction of CO_(2)hydrogenation to CO.Among the three nitride catalysts,theγ-Mo_(2)N exhibits superior activity to target product CO,which is 4.6 and 76 times higher than the other two counterparts ofβ-W_(2)N andδ-NbN at 600℃,respectively.Additionally,γ-Mo_(2)N exhibits excellent stability on both cyclic heating-cooling and high space velocity steady state operation.The deactivation degree of cyclic heating-cooling evaluation after 5 cycles and long-term stability performance at 773 and 873 K in 50 h are all less than 10%.In-situ XRD and kinetic studies suggest that theγ-Mo_(2)N itself is able to activate both of the reactants CO_(2)and H_(2).Below 400℃,the reaction mainly occurs at the surface ofγ-Mo_(2)N catalyst.CO_(2)and H_(2)competitively adsorbe on the surface of catalyst and CO_(2)is the relatively stronger surface adsorbate.At a higher temperature,the interstitial vacancies of theγ-Mo_(2)N can be reversibly filled with the oxygen from CO_(2)dissociation.Both of the surface and bulk phase sites ofγ-Mo_(2)N participate in the high temperature CO_(2)hydrogenation pathway.

Development of Transition Metal Nitrides as Oxygen and Hydrogen Electrocatalysts

With the increasing demand for energy, various emerging energy storage/conversion technologies have gradually penetrated human life, providing numerous conveniences. The practical application efficiency is often affected by the slow kinetics of hydrogen or oxygen electrocatalytic reactions(hydrogen evolution and oxidation reactions, oxygen evolution and reduction reactions) among the emerging devices. Therefore, the researchers devote to finding cost-effective electrocatalysts. Non-noble metal catalysts have low cost and good catalytic activity, but poor stability, agglomeration, dissolution, and other problems will occur after a long cycle, such as transition metal oxides and carbides. Transition metal nitrides(TMNs) stand out among all kinds of non-noble metal catalysts because of the intrinsic platinum-like electrocatalytic activities, relatively high conductivity, and wide range of tunability. In this review, the applications of TMNs in electrocatalytic fields are summarized based on the number of metals contained in TMNs. The practical application potentials of TMNs in fuel cell, water splitting, zinc-air battery and other electrochemical energy storage/conversion devices are also listed. Finally, the design strategies and viewpoints of TMNs-based electrocatalyst are summarized. The potential challenges of TMNs-based electrocatalyst in the development of electrocatalytic energy devices in the future are prospected.

Recent advances in pseudocapacitor electrode materials: Transition metal oxides and nitrides

Faraday pseudocapacitors take both advantages of secondary battery with high energy density and supercapacitors with high power density,and electrode material is the key to determine the performance of Faraday pseudocapacitors.Transition metal oxides and nitrides,as the two main kinds of pseudocapacitor electrode materials,can enhance energy density while maintaining high power capability.Recent advances in designing nanostructured architectures and preparing composites with high specific surface areas based on transition metal oxides and nitrides,including ruthenium oxides,nickel oxides,manganese oxides,vanadium oxides,cobalt oxides,iridium oxides,titanium nitrides,vanadium nitrides,molybdenum nitrides and niobium nitrides,are addressed,which would provide important significances for deep researches on pseudocapacitor electrode materials.

A review on the synthesis of transition metal nitride nanostructures and their energy related applications

Transition metal nitrides(TMN)have recently grabbed immensely appealing as ideal active materials in energy storage and catalysis fields on account of their remarkable electrical conductivity,excellent chemical stability,wide band gap and tunable morphology.Both pure TMN and TMN-based materials have been extensively studied concerned with their preparation approaches,nanostructures,and favored performance in various applications.However,the processes towards synthesis of TMN are numerous and complex.Choosing appropriate method to obtain target TMN with desired structure is crucial,which further affects its practical application performance.Herein,this review offers a timely and comprehensive summary of the synthetic ways to TMN and their application in energy related domains.The synthesis section is categorized into in-situ and ex-situ based on where the N element in TMN origins from.Then,overviews on the energy related applications including energy storage,electrocatalysis and photocatalysis are discussed.In the end,the problems to be solved and the development trend of the synthesis and application of transition metal nitrides are prospected.

Hollow Ni Mo-based nitride heterojunction with super-hydrophilic/aerophobic surface for efficient urea-assisted hydrogen production

Hydrogen evolution reaction(HER)and urea oxidation reaction(UOR)are key reactions of the watercycling associated catalytic process/device.The design of catalysts with a super-hydrophilic/aerophobic structure and optimized electron distribution holds great promise.Here,we have designed a threedimensional(3D)hollow Ni/NiMoN hierarchical structure with arrayed-sheet surface based on a onepot hydrothermal route for efficient urea-assisted HER based on a simple hydrothermal process.The Ni/NiMoN catalyst exhibits super-hydrophilic/aerophobic properties with a small droplet contact angle of 6.07°and an underwater bubble contact angle of 155.7°,thus facilitating an escape of bubbles from the electrodes.Density functional theory calculations and X-ray photoelectron spectroscopy results indicate the optimized electronic structure at the interface of Ni and NiMoN,which can promote the adsorption/desorption of reactants and intermediates.The virtues combining with a large specific surface area endow Ni/NiMoN with efficient catalytic activity of low potentials of 25 mV for HER and 1.33 V for UOR at10 mA cm^(-2).The coupled HER and UOR system demonstrates a low cell voltage of 1.42 V at 10 mA cm^(-2),which is approximately 209 mV lower than water electrolysis.

Calculation of Bulk Moduli of Carbon Nitride/metal Nitride Composites

ased on Marvin L. Cohen′s empirical approach, a simple model of calculation of bulk moduli of carbon nitride/metal nitride composites is shown. The calculated bulk modulus of the crystalline carbon nitride/TiN composite coating is comparable with that of cBN and diamond. This model predicts that the modulus of the composite is between the moduli of the two components.

Electric Field Induced Permanent Superconductivity in Layered Metal Nitride Chlorides HfNCl and ZrNCl

Devices of electric double-layer transistors （EDLTs） with ionic liquid have been employed as an effective way to dope carriers over a wide range. However, the induced electronic states can hardly survive in the materials after releasing the gate voltage VG at temperatures higher than the melting point of the selected ionic liquid. Here we show that a permanent superconductivity with transition temperature Tc of 24 and 15K is realized hi single crystals and polycrystalline samples of HfNCI and ZrNCI upon applying proper VG＇s at different temperatures. Reversible change between insulating and superconducting states can be obtained by applying positive and negative VG at low temperature such as 220K, whereas VG ＇s applied at 250K induce the irreversible superconducting transition. The upper critical field He2 of the superconducting states obtained at different gating temperatures shows similar temperature dependence. We propose a reasonable scenario that partial vacancy of Cl ions could be caused by applying proper VG＇s at slightly higher processing temperatures, which consequently results in a permanent electron doping in the system. Such a technique shows great potential to systematically tune the bulk electronic state in the similar two-dimensional systems.

General synthesis of transition metal nitride arrays by ultrafast flash Joule heating within 500 ms

Transition metal nitrides(TMNs)are considered as viable alternatives to noble metal catalysts owing to their versatile electronic structure and favorable catalytic performance.However,the conventional synthetic processes for TMNs suffer from high energy consumption and low production yield.In this study,a range of TMNs and their hetero-composite arrays were successfully synthesized via an ultrafast flash Joule heating technology within 0.5 s.As a proof concept,the nitrides and hetero-composites were applied for the electrocatalytic hydrazine oxidation reaction(HzOR),in which the Co_(4)N/Mo_(16)N_(7)arrays shows the best performance with a geometric current density of 100 mA cm^(-2)at 23 mV(vs.reversible hydrogen electrode(RHE)).This work paves a new way for the ultrafast synthesis of TMNs which could meet the ever-increased energy crisis.

Nitrogen cold plasma treatment stabilizes Cu^(0)/Cu^(+) electrocatalysts to enhance CO_(2) to C2 conversion

Cu-based materials are ideal catalysts for CO_(2) electrocatalytic reduction reaction(CO_(2)RR) into multicarbon products.However,such reactions require stringent conditions on local environments of catalyst surfaces,which currently are the global pressing challenges.Here,a stabilized activation of Cu^(0)/Cu^(+)-onAg interface by N_(2) cold plasma treatment was developed for improving Faradaic efficiency(FE) of CO_(2)RR into C2 products.The resultant Ag@Cu-CuN_x exhibits a C2 FE of 72% with a partial current density of-14.9 mA cm^(-2) at-1.0 V vs.RHE(reversible hydrogen electrode).Combining density functional theory(DFT) and experimental investigations,we unveiled that Cu^(0)/Cu^(+) species can be co ntrollably tu ned by the incorporation of nitrogen to form CuN_x on Ag surface,i.e.,Ag@Cu-CuN_x.This strategy enhances ^(*)CO intermediates generation and accelerates C-C coupling both thermodynamically and kinetically.The intermediates O^(*)C^(*)CO,^(*)COOH,and ^(*)CO were detected by in-situ attenuated total internal reflection surface enhanced infrared absorption spectroscopy(ATR-SEIRAS).The uncovered CO_(2)RR-into-C2 products were carried out along CO_(2)→^(*)COOH→^(*)CO→O^(*)C^(*)CO→^(*)C_(2)H_(3)O→^(*)C_(2)H_(4)O→ C_(2)H_(5)OH(or ^(*)C_(2)H_(3)O→^(*)O+C_(2)H_(4)) paths over Ag@Cu-CuN_x electrocatalyst.This work provides a new approach to design Cu-based electrocatalysts with high-efficiency,mild condition,and stable CO_(2)RR to C2 products.

Elastic and thermodynamic properties of Re_2N at high pressure and high temperature

First principles calculations are preformed to systematically investigate the elastic and thermodynamic properties of Re2N at high pressure and high temperature. The Re2N exhibits a clear elastic anisotropy and the elastic constants C11 and C33 vary rapidly in comparison with the variations in C12, C13 and C44 at high pressure. In addition, bulk modulus B, elastic modulus E, and shear modulus Gas a function of crystal orientations for Re2N are also investigated for the first time. The tensile directional dependences of the elastic modulus obey the following trend： [0001] [1211] [1010] [1011]EEEE〉〉〉 . The shear moduli of Re2N within the （0001） basal plane are the smallest and greatly reduce the resistance of against large shear deformations. Based on the quasi-harmonic Debye model, the dependences of Debye temperature, Grüneisen parameter, heat capacity and thermal expansion coefficient on the temperature and pressure are explored in the whole pressure range from 0 to 50 GPa and temperature range from 0 to 1600 K.

Paired formate and H_(2) productions via efficient bifunctional Ni-Mo nitride nanowire electrocatalysts

Electrocatalytic water splitting provides a potentially sustainable approach for hydrogen production,but is typically restrained by kinetically slow anodic oxygen evolution reaction(OER)which is of lesser value.Here,free-standing,hetero-structured Ni_(3)N-Ni_(0.2)Mo_(0.8)N nanowire arrays are prepared on carbon cloth(CC)electrodes for hydrogen evolution reaction(HER)and glycerol oxidation reaction(GOR)to formate with a remarkably high Faradaic efficiency of 96%.A two-electrode electrolyzer for GOR-assisted hydrogen production operates with a current density of 10 mA cm^(-2)at an applied cell voltage of 1.40 V,220 mV lower than for alkaline water splitting.In-situ Raman measurements identify Ni(Ⅲ)as the active form of the catalyst for GOR rather than Ni(IV)and in-situ Fourier transform infrared(FTIR)spectroscopy measurements reveal pathways for GOR to formate.From density functional theory(DFT)calculations,the Ni_(3)N-Ni_(0.2)Mo_(0.8)N heterostructure is beneficial for optimizing adsorption energies of reagents and intermediates and for promoting HER and GOR activities by charge redistribution across the heterointerface.The same electrode also catalyzes conversion of ethylene glycol from polyethylene terephthalate(PET)plastic hydrolysate into formate.The combined results show that electrolytic H_(2) and formate production from alkaline glycerol and ethylene glycol solutions provide a promising strategy as a cost-effective energy supply.

Recent advance in high-pressure solid-state metathesis reactions

High-pressure solid-state metathesis(HPSSM)reaction is an effective route to novel metal nitrides.A recent advance in HPSSM reactions is presented for a number of examples,including 3d transition metal nitrides(ε-Fe_(3)N,ε-Fe_(3-x)Co_(x)N,CrN,and Co_(4)N_(x)),4d transition metal nitrides(MoNx),and 5d transition metal nitrides(Re_(3)N,WN_(x)).Thermodynamic investigations based on density functional theory(DFT)calculations on several typical HPSSM reactions between metal oxides and boron nitride indicate that the pressure could reduce the reaction enthalpy △H.High-pressure confining environment thermodynamically favors an ion-exchange process between metal atom and boron atom,and successfully results in the formation of well-crystalized metal nitrides with potential applications.

^(15)N/^(14)N Isotopic Exchange in the Dissociative Adsorption of N_(2) on Tantalum Nitride Cluster Anions Ta_(3)N_(3)

Adsorption and activation of dinitrogen(N_(2)) is an indispensable process in nitrogen fixation.Metal nitride species continue to attract attention as a promsing catalyst for ammonia synthesis.However,the detailed mechanisms at a molecular level between reactive nitride species and N_(2) remain unclear at elevated temperature,which is important to understand the temperature effect and narrow the gap between the gas phase system and condensed phase system.Herein,the ^(15)N/^(14)N isotopic exchange in the reaction between tantalum nitride cluster anions Ta_(3)^(14)N_(3)^(-) and ^(15)N_(2) leading to the regeneration of ^(14)N_(2)/^(14)N^(15)N was observed at elevated temperature(393-593 K)using mass spectrometry.With the aid of theoretical calculations,the exchange mechanism and the effect of temperature to promote the dissociation of N_(2) on Ta_(3)N_(3)^(-) were elucidated.A comparison experiment for Ta_(3)^(14)N_(4)^(-)/^(15)N_(2) couple indicated that only desorption of ^(15)N_(2) from Ta_(3)^(14)N_(4)^(15)N_(2)^(-) took place at elevated temperature.The different exchange behavior can be well understood by the fact that nitrogen vacancy is a requisite for the dinitrogen activation over metal nitride species.This study may shed light on understanding the role of nitrogen vacancy in nitride species for ammonia synthesis and provide clues in designing effective catalysts for nitrogen fixation.

Brazed joints of CBN grains and AISI 1045 steel with AgCuTi-TiC mixed powder as filler materials

The brazing process of cubic boron nitride （CBN） grains and AISI 1045 steel with AgCuTi-TiC mixed powder as a filler material was carried out.The joining strength and the interfacial microstructure were investigated.The experimental results indicate that the spreading of the molten filler material on AISI 1045 steel is decreased with the increase of TiC content.A good interface is formed between the TiC particulates and AgCuTi alloy through the wetting behavior.In the case of AgCuTi＋16wt% TiC,the strength of the brazed steel-to-steel joints reached the highest value of 95MPa dependent upon the reinforcement effect of TiC particles within the filler layer.Brazing resultants of TiB2,TiB,and TiN are produced at the interface of the CBN grains and the AgCuTi-TiC filler layer by virtue of the interdiffusion of B,N,and Ti atoms.

Oxygen-modulated metal nitride clusters with moderate binding ability to insoluble Li_(2)S_(x) for reversible polysulfide electrocatalysis

Multiphase sulfur redox reactions with advanced homogeneous and heterogeneous electrochemical processes in lithium–sulfur(Li–S)batteries possess sluggish kinetics.The slow kinetics leads to significant capacity decay during charge/discharge processes.Therefore,electrocatalysts with adequate sulfurredox properties are required to accelerate reversible polysulfide conversion in cathodes.In this study,we have fabricated an oxygen-modulated metal nitride cluster(C-MoN_(x)-O)that has a moderate binding ability to the insoluble Li_(2)S_(x)for reversible polysulfide electrocatalysis.A Li–S battery equipped with CMoN_(x)-O electrocatalyst displayed a high discharge capacity of 875 mAh g^(-1)at 0.5 C.The capacity decay rate of each cycle was only 0.10%after 280 cycles,which is much lower than the control groups(C-MoO_(x):0.16%;C-MoN_(x):0.21%).Kinetic studies and theoretical calculations suggest that C-MoN_(x)-O electrocatalyst presents a moderate binding ability to the insoluble Li_(2)S_(2)and Li_(2)S when compared to the C-MoO_(x)and C-MoN_(x)surfaces.Thus,the C-MoN_(x)-O can effectively immobilize and reversibly catalyze the solid–solid conversion of Li_(2)S_(2)–Li_(2)S during charge–discharge cycling,thus promoting reaction kinetics and eliminating the shuttle effect.This study to design oxygen-doped metal nitrides provides innovative structures and reversible solid–solid conversions to overcome the sluggish redox chemistry of polysulfides.

Morphological effect on electrochemical performance of nanostructural CrN

Size and morphology are critical factors in determining the electrochemical performance of the supercapacitor materials,due to the manifestation of the nanosize effect.Herein,different nanostructures of the CrN material are prepared by the combination of a thermal-nitridation process and a template technique.High-temperature nitridation could not only transform the hexagonal Cr_(2)O_(3)into cubic CrN,but also keep the template morphology barely unchanged.The obtained CrN nanostructures,including(i)hierarchical microspheres assembled by nanoparticles,(ii)microlayers,and(iii)nanoparticles,are studied for the electrochemical supercapacitor.The CrN microspheres show the best specific capacitance(213.2 F/g),cyclic stability(capacitance retention rate of 96%after 5000 cycles in 1-mol/L KOH solution),high energy density(28.9 Wh/kg),and power density(443.4 W/kg),comparing with the other two nanostructures.Based on the impedance spectroscopy and nitrogen adsorption analysis,it is revealed that the enhancement arised mainly from a high-conductance and specific surface area of CrN microspheres.This work presents a general strategy of fabricating controllable CrN nanostructures to achieve the enhanced supercapacitor performance.

Bandgap evolution of Mg_(3)N_(2) under pressure:Experimental and theoretical studies

Wide bandgap semiconductors are crucially significant for optoelectronic and thermoelectric device applications.Metal nitride is a class of semiconductor material with great potential.Under high pressure,the bandgap of magnesium nitride was predicted to grow.Raman spectra,ultra-violet-visible(UV-Vis)absorption spectra,and first-principles calculations were employed in this study to analyze the bandgap evolution of Mg_(3)N_(2).The widening of the bandgap has been first detected experimentally,with the gap increasing from 2.05 eV at 3 GPa to 2.88 eV at 47 GPa.According to the calculation results,the enhanced covalent component is responsible for the bandgap widening.