YBa2Cu3O7-x(YBCO) films were fabricated on an LAO substrate using the trifluoroacetic acid-metal organic deposition(TFA-MOD) method and the effects of the humidity and heat treatment temperatures on the microstructure...YBa2Cu3O7-x(YBCO) films were fabricated on an LAO substrate using the trifluoroacetic acid-metal organic deposition(TFA-MOD) method and the effects of the humidity and heat treatment temperatures on the microstructure,degree of texture and critical properties of the films were evaluated.In order to understand the combined effects of the humidity and the calcining and firing temperatures on critical properties,heat-treatment was performed at various temperatures with the other processing variables fixed.The films were calcined at 400-430 ℃ and fired at 750-800 ℃ in a 0-12.1% humidified Ar-O2 atmosphere.The texture was determined by pole-figure analysis.The amount of the BaF2 phase was effectively reduced and a sharp and strong biaxial texture was formed under a humidified atmosphere,which led to increased critical properties.In addition,the microstructure varied significantly with firing temperature but changed little with calcining temperature.The highest IC of 40 A/cm-width,which corresponds to JC value of 1.8 MA/cm2,was obtained for the films fired at 775 ℃(in 12.1% humidity) after calcining at 400-430 ℃.It is likely that the highest IC value is due to the formation of a more pure YBCO phase,c-axis grains,and a denser microstructure.展开更多
针对银川东换流站金属回线转换开关(Metallic Return Transfer Breaker,MRTB)转换失败引起直流闭锁的问题,通过对MRTB动作顺序、避雷器击穿原因、银川东换流站和胶东换流站保护动作进行分析,提出了采用延时90 s开放逆变站金属回线接地...针对银川东换流站金属回线转换开关(Metallic Return Transfer Breaker,MRTB)转换失败引起直流闭锁的问题,通过对MRTB动作顺序、避雷器击穿原因、银川东换流站和胶东换流站保护动作进行分析,提出了采用延时90 s开放逆变站金属回线接地保护使能信号的方法,解决在转化过程中由于MRTB重合造成保护误动的问题。应用结果表明:该方法可以有效避免直流闭锁,保证了直流系统可靠运行。展开更多
基金supported by Samsung Research Fund,Sungkyunkwan University,2006
文摘YBa2Cu3O7-x(YBCO) films were fabricated on an LAO substrate using the trifluoroacetic acid-metal organic deposition(TFA-MOD) method and the effects of the humidity and heat treatment temperatures on the microstructure,degree of texture and critical properties of the films were evaluated.In order to understand the combined effects of the humidity and the calcining and firing temperatures on critical properties,heat-treatment was performed at various temperatures with the other processing variables fixed.The films were calcined at 400-430 ℃ and fired at 750-800 ℃ in a 0-12.1% humidified Ar-O2 atmosphere.The texture was determined by pole-figure analysis.The amount of the BaF2 phase was effectively reduced and a sharp and strong biaxial texture was formed under a humidified atmosphere,which led to increased critical properties.In addition,the microstructure varied significantly with firing temperature but changed little with calcining temperature.The highest IC of 40 A/cm-width,which corresponds to JC value of 1.8 MA/cm2,was obtained for the films fired at 775 ℃(in 12.1% humidity) after calcining at 400-430 ℃.It is likely that the highest IC value is due to the formation of a more pure YBCO phase,c-axis grains,and a denser microstructure.
文摘针对银川东换流站金属回线转换开关(Metallic Return Transfer Breaker,MRTB)转换失败引起直流闭锁的问题,通过对MRTB动作顺序、避雷器击穿原因、银川东换流站和胶东换流站保护动作进行分析,提出了采用延时90 s开放逆变站金属回线接地保护使能信号的方法,解决在转化过程中由于MRTB重合造成保护误动的问题。应用结果表明:该方法可以有效避免直流闭锁,保证了直流系统可靠运行。