Bottom ash is the major by-product of municipal solid waste incineration(MSWI), and is often reused as an engineering material, such as road-base aggregate. However, some metals(especially aluminum) in bottom ash ...Bottom ash is the major by-product of municipal solid waste incineration(MSWI), and is often reused as an engineering material, such as road-base aggregate. However, some metals(especially aluminum) in bottom ash can react with water and generate gas that could cause expansion and failure of products containing the ash; these metals must be removed before the ash is utilized. The size distribution and the chemical speciation of metals in the bottom ash from two Chinese MSWI plants were examined in this study, and the recovery potential of metals from the ash was evaluated. The metal concentrations in these bottom ashes were lower than that generated in other developed countries. Specifically, the contents of Al,Fe, Cu and Zn were 18.9–29.2, 25.5–32.3, 0.7–1.0 and 1.6–2.5 g/kg, respectively. Moreover,44.9–57.0 wt.% of Al and 55.6–75.4 wt.% of Fe were distributed in bottom ash particles smaller than 5 mm. Similarly, 46.6–79.7 wt.% of Cu and 42.9–74.2 wt.% of Zn were concentrated in particles smaller than 3 mm. The Fe in the bottom ash mainly existed as hematite, and its chemical speciation was considered to limit the recovery efficiency of magnetic separation.展开更多
The slag samples taken from landfill, which originated from different metallurgical processes, have been characterized in this study. The slags were categor- ized as electric arc furnace (EAF) slag, argon oxygen dec...The slag samples taken from landfill, which originated from different metallurgical processes, have been characterized in this study. The slags were categor- ized as electric arc furnace (EAF) slag, argon oxygen decarburization/metal refining process slag and vacuum oxygen decarburization slag based on chromium content and basicity. EAF slags have higher potential in metal recovery than the other two slags due to its higher iron and chromium contents. The size of the iron-chromium-nickel alloy particles varies from a few ~tm up to several cm. The recoveries of large metal particles and metal-spinel aggregates have potential to make the metal recovery from landfilled slags economically viable.展开更多
IBC Advanced Technologies' Molecular Recognition Technology(MRT) products,trade named SuperLig,selectively and rapidly bind with target metal ions to remove them from solution.The MRT process can produce a high pu...IBC Advanced Technologies' Molecular Recognition Technology(MRT) products,trade named SuperLig,selectively and rapidly bind with target metal ions to remove them from solution.The MRT process can produce a high purity separation product of maximum added value at low cost.In this paper,applications of MRT in the precious metals industry,including selective commercial separations involving Au,Pd,Pt,Rh,and Ru,are described and discussed.Application of MRT to the analytical determination of precious metals is presented.Potential use of MRT in recovering precious metals from end-of-life(EOL) products is discussed.展开更多
A sodium modification–direct reduction coupled process was proposed for the simultaneous extraction of V and Fe from vanadium- bearing titanomagnetite. The sodium oxidation of vanadium oxides to water-soluble sodium ...A sodium modification–direct reduction coupled process was proposed for the simultaneous extraction of V and Fe from vanadium- bearing titanomagnetite. The sodium oxidation of vanadium oxides to water-soluble sodium vanadate and the transformation of iron oxides to metallic iron were accomplished in a single-step high-temperature process. The increase in roasting temperature favors the reduction of iron oxides but disfavors the oxidation of vanadium oxides. The recoveries of vanadium, iron, and titanium reached 84.52%, 89.37%, and 95.59%, respectively. Moreover, the acid decomposition efficiency of titanium slag reached 96.45%. Compared with traditional processes, the novel process provides several advantages, including a shorter flow, a lower energy consumption, and a higher utilization efficiency of vanadium-bearing titanomagnetite resources. ? 2017, University of Science and Technology Beijing and Springer-Verlag Berlin Heidelberg.展开更多
The technology for beneficiation of banded iron ores containing low iron value is a challenging task due to increasing demand of quality iron ore in India. A flotation process has been developed to treat one such ore,...The technology for beneficiation of banded iron ores containing low iron value is a challenging task due to increasing demand of quality iron ore in India. A flotation process has been developed to treat one such ore, namely banded hematite quartzite (BHQ) containing 41.8wt% Fe and 41.5wt% SiO2,by using oleic acid, methyl isobutyl carbinol (MIBC), and sodium silicate as the collector, frother, and dispersant, respectively. The relative effects of these variables have been evaluated in half-normal plots and Pareto charts using central composite rotatable design. A quadratic response model has been developed for both Fe grade and recovery and optimized within the experimental range. The optimum reagent dosages are found to be as follows: collector concentration of 243.58 g/t, dispersant concentration of 195.67 g/t, pH 8.69, and conditioning time of 4.8 min to achieve the maximum Fe grade of 64.25% with 67.33% recovery. The predictions of the model with regard to iron grade and recovery are in good agreement with the experimental results.展开更多
The coupling of washing with adsorption process can be adopted for the treatment of soils contaminated with heavy metals pollution.However,the complex environment of soil and the competitive behavior of leaching chemi...The coupling of washing with adsorption process can be adopted for the treatment of soils contaminated with heavy metals pollution.However,the complex environment of soil and the competitive behavior of leaching chemicals considerably restrain adsorption capacity of adsorbent material during washing process,which demands a higher resistance of the adsorbents to interference.In this study,we synthesized strongly magnetic,high specific surface area(573.49 m^(2)/g)UiO66 composites(i.e.,UiO66-Fe_(3)O_(4))using hydrothermal process.The UiO66-Fe_(3)O_(4) was applied as an adsorbent during the ethylene diamine tetraacetic acid(EDTA)-assisted washing process of contaminated soil.The incorporation of UiO66-Fe_(3)O_(4)results in rapid heavy metal removal and recovery from the soil under low concentrations of washing agent(0.001 mol/L)with reduced residual heavy metal mobility of soil after remediation.Furthermore,UiO66-Fe_(3)O_(4)can quickly recollect by an external magnet,which offers a simple and inexpensive recovery method for heavy metals from contaminated soil.Overall,UiO66-Fe_(3)O_(4)configuration with EDTA-assisted washing process showed opportunities for heavy metals contaminated sites.展开更多
Lead, zinc, and iron were recovered from jarosite residues using direct reduction followed by magnetic separation. The influence of the coal dosage, reduction temperature, and reduction time on the volatilization rate...Lead, zinc, and iron were recovered from jarosite residues using direct reduction followed by magnetic separation. The influence of the coal dosage, reduction temperature, and reduction time on the volatilization rates of lead and zinc and the metallization rate of iron were investigated. The results show that the volatilization rates of lead and zinc were 96.97% and 99.89%, respectively, and the iron metallization rate was 91.97% under the optimal reduction roasting conditions of a coal dosage of 25.0 wt% and reduction roasting at 1250°C for 60 min. The magnetic concentrate with an iron content of 90.59 wt% and an iron recovery rate of 50.87% was obtained under the optimum conditions in which 96.56% of the reduction product particles were smaller than 37 μm and the magnetic field strength was 24 k A/m. Therefore, the results of this study demonstrate that recovering valuable metals such as lead, zinc, and iron from jarosite residues is feasible using the developed approach.展开更多
Negative bias temperature instability(NBTI) has become a serious reliability issue, and the interface traps and oxide charges play an important role in the degradation process. In this paper, we study the recovery o...Negative bias temperature instability(NBTI) has become a serious reliability issue, and the interface traps and oxide charges play an important role in the degradation process. In this paper, we study the recovery of NBTI systemically under different conditions in the P-type metal–oxide–semiconductor field effect transistor(PMOSFET), explain the various recovery phenomena, and find the possible processes of the recovery.展开更多
Photocatalytic recovery,a novel precious metal recycling technology,dedicates to solving the environmental and energy consumption problems caused by traditional technologies.The activation of molecular oxygen (O_(2)) ...Photocatalytic recovery,a novel precious metal recycling technology,dedicates to solving the environmental and energy consumption problems caused by traditional technologies.The activation of molecular oxygen (O_(2)) is one of the most critical steps in the whole process.Herein,we regulated the different adsorption intensity of oxygen on the surface by designing phosphate (PO_(4)^(3-)) modified titanium oxide(TiO_(2)).The results show that the adsorption of oxygen on the photocatalyst surface is gradually enhanced,which effectively improves the dissolution rate of precious metals.PO_(4)^(3-)modification increased the photocatalytic dissolution rate of gold (Au) by 2.8 times.The photocatalytic activity of other precious metals dissolution (such as palladium (Pd),platinum (Pt),rhodium (Rh),ruthenium (Ru) and iridium (Ir)) was also significantly improved.It is applied to the recovery of precious metals from spent catalysts and electronic devices to significantly promote the recovery efficiency.This indicates the direction for designing more efficient photocatalysts for precious metal recovery.展开更多
Cold purification filter cakes generated in the hydrometallurgical processing of Angouran mine zinc concentrate commonly contain significant amounts of Zn, Cd, and Ni ions and thus are valuable resources for metal rec...Cold purification filter cakes generated in the hydrometallurgical processing of Angouran mine zinc concentrate commonly contain significant amounts of Zn, Cd, and Ni ions and thus are valuable resources for metal recovery. In this research, a nickel containing solution that was obtained from sulfuric acid leaching of the filter cake following cadmium and zinc removal was subjected to solvent extraction experiments using 10vol%LIX984N diluted in kerosene. Under optimum experimental conditions (pH 5.3, volume ratio of organic/aqueous (O:A) = 2:1, and contact time -5 min), more than 97.1% of nickel was extracted. Nickel was stripped from the loaded organic by contacting with a 200 g/L sulfuric acid solution, from which 77.7% of nickel was recovered in a single contact at the optimum conditions (pH 1-1.5, O:A =5:1, and contact time =15 min).展开更多
The improvement of microbial characterization has increased the comprehension of microbial population and their ability in the microbiological metal dissolution. Bioleaching processes have been expanded to use microor...The improvement of microbial characterization has increased the comprehension of microbial population and their ability in the microbiological metal dissolution. Bioleaching processes have been expanded to use microorganisms for the recovery of metals from ores and wastes. This study introduces Palca mine tailings pond in Peru which turned into acid mine drainage (AMD). AMD is a source of microbial communities whose microorganisms may support the aqueous extractive metallurgy for metal recovery. Four samples of AMD were collected from different locations and the elemental characterization showed concentrations of metals, such as Cu, Zn, Al, Mn, and Fe. The pH of the samples showed variation between 1.9 - 6.8. Twenty-one microorganisms were isolated and selected according the cell morphology. 16s rRNA gene sequences identified five species of which three belong to the bacterial kingdom and two to the Fungi kingdom. Two of the bacterial species were ferrous ion oxidizing bacteria, identified as Acidithiobacillus ferriphilus and Acidithiobacillus ferridurans;and the other one a ferric ion reducing bacteria identified as Acidiphilium acidophilum. The fungi species identified were Rhodotorula sinensis and Exophiala xenobiotica, a filamentous fungus isolated for the first time from an AMD.展开更多
The experiments of metal Cd extraction were carried out three times at oil phase/aqueous phase (O/A) = 1 and pH 2.2 by using 1.3 mol/L di(2-ethylhexyl)phosphoric acid (DEHPA) as the agent, with an extraction rat...The experiments of metal Cd extraction were carried out three times at oil phase/aqueous phase (O/A) = 1 and pH 2.2 by using 1.3 mol/L di(2-ethylhexyl)phosphoric acid (DEHPA) as the agent, with an extraction rate of 99.5%. Experiments on metal Co extraction were done three times at O/A = 0.5 and pH 4.7 by using 0.4 mol/L Cyanex 272 as the agent, with an extraction rate of 99.2%. By using equilibrium data and massive calculations to analyze and predict the interaction among the extraction systems, this paper came out with the polynomials of the empirical model as well as their parameter values for the equilibrium concentration of the above two extraction looos.展开更多
Wastewater management and energy/resource recycling have been extensively investigated via photo(electro)catalysis.Although both operation processes are driven effectively by the same interfacial charge,each system is...Wastewater management and energy/resource recycling have been extensively investigated via photo(electro)catalysis.Although both operation processes are driven effectively by the same interfacial charge,each system is practiced separately since they require very different reaction conditions.In this review,we showcase the recent advancements in photo(electro)catalytic process that enables the wastewater treatment and simultaneous energy/resource recovery(WT-ERR).Various literatures based on photo(electro)catalysis for wastewater treatment coupled with CO_(2)conversion,H_(2)production and heavy metal recovery are summarized.Besides,the fundamentals of photo(electro)catalysis and the influencing factors in such synergistic process are also presented.The essential feature of the catalysis lies in effectively utilizing hole oxidation for pollutant degradation and electron reduction for energy/resource recovery.Although in its infancy,the reviewed technology provides new avenue for developing next-generation wastewater treatment process.Moreover,we expect that this review can stimulate intensive researches to rationally design photo(electro)catalytic systems for environmental remediation accompanied with energy and resource recovery.展开更多
For recovery of metals from low-concentration sources, biosorption is one of promising technologies and poly-γ-glutamic acid(γ-PGA) has been known as a potential biosorbent for recovery of heavy metals from aqueou...For recovery of metals from low-concentration sources, biosorption is one of promising technologies and poly-γ-glutamic acid(γ-PGA) has been known as a potential biosorbent for recovery of heavy metals from aqueous solutions. Effects of solution pH on recovery of rare-earth metal Nd are systematically examined to clarify mechanisms of Nd recovery by y-PGA and its sodium salt(y-PGANa). The recovery efficiency of Nd by y-PGA increases from 2.4 to 19.6% as pH increases from 2 to 4. Subsequently the Nd recovery efficiencies for y-PGA and y-PGANa remain almost constant in the range of pH from 4 to 7. For pH 〉 7 the increase in Nd recovery is significant and 100% recovery of Nd is achieved at pH 9. The pH dependency on Nd recovery by y-PGANa is similar to that by y-PGA. Contributions of adsorption and precipitation/coagulation to Nd recovery process are quantified. Whereas the adsorption dominates Nd recovery at lower pH(〈~4), the precipitation/coagulation controls Nd recovery process for pH 〉 7. At higher pH, purple gel precipitates are observed. The maximum adsorption capacities for γ-PGA and yPGANa are 215 mg-Nd/(g-γ-PGA) at pH 4 and 305 mg-Nd/(g-y-PGANa) at pH 3, respectively. From the spectra of FT-IR and XPS, the biosorption of Nd onto y-PGA and y-PGANa via electrostatic interaction with carboxylate anions at pH 3 is verified. The Nd complexation with amide and carboxylate anion groups on γ-PGA and γ-PGANa may also contribute to the Nd recovery. The biosorption isotherms for Nd recovery by γ-PGA and γ-PGANa can be satisfactorily fitted by the Langmuir model. The thermodynamic studies suggest that the biosorptions of Nd by γ-PGA and γ-PGANa are endothermic. The utilization of γ-PGA and γ-PGANa as potential and eco-friendly biosorbents for the highly effective recovery of Nd from aqueous solution is confirmed.展开更多
The recovery of metals from a multi-component alloy obtained by crushing, melting and anodic dissolution of waste from electric and electronic equipment(WEEE) was investigated. The anodic dissolution of the alloy wa...The recovery of metals from a multi-component alloy obtained by crushing, melting and anodic dissolution of waste from electric and electronic equipment(WEEE) was investigated. The anodic dissolution of the alloy was carried out in an electrolysis cell with one copper cathode and a central cast anode, immersed in the electrolyte formed by choline chloride-ethylene glycol-iodine. The temperature of the electrolyte during the process was 343 K. Depending on the electrolysis parameters(current density and cell voltage), cathodic deposits of Sn, Pb and Zn of 〉99% purity were obtained. Cyclic voltammetry was used in order to determine the deposition potentials of the studied metals. The obtained metallic deposits were subject of determination of XRD, SEM/EDX and AFM in order to evidence the deposits structure and morphology. The experiments performed demonstrated the possibility of separating/selective recovery of metals from the multi-component alloy resulted from the waste from electrical and electronic equipment by anodic dissolution in ionic liquids.展开更多
The simultaneous electro-oxidation of Ni(Ⅱ)-citrate and electrodeposition recovery of nickel metal were attempted in a combined electro-oxidation-electrodeposition reactor with a boron-doped diamond(BDD)anode and a p...The simultaneous electro-oxidation of Ni(Ⅱ)-citrate and electrodeposition recovery of nickel metal were attempted in a combined electro-oxidation-electrodeposition reactor with a boron-doped diamond(BDD)anode and a polished titanium cathode.Effects of initial nickel citrate concentration,current density,initial p H,electrode spacing,electrolyte type,and initial electrolyte dosage on electrochemical performance were examined.The efficiencies of Ni(Ⅱ)-citrate removal and nickel metal recovery were determined to be 100%and over 72%,respectively,under the optimized conditions(10 m A/cm^(2),pH 4.09,80 mmol/L Na_(2)SO_(4),initial Ni(Ⅱ)-citrate concentration of 75 mg/L,electrode spacing of 1 cm,and 180 min of electrolysis).Energy consumption increased with increased current density,and the energy consumption was 0.032 kWh/L at a current density of 10 m A/cm^(2)(pH 6.58).The deposits at the cathode were characterized by scanning electron microscopy(SEM),energy-dispersive spectrometry(EDS),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).These characterization results indicated that the purity of metallic nickel in cathodic deposition was over 95%.The electrochemical system exhibited a prospective approach to oxidize metal complexes and recover metallic nickel.展开更多
In nature, microbes are involved in weathering of rocks, in mobilization of metals from minerals, and in metal precipitation and deposition. These microbiological principles and processes can be adapted to treat parti...In nature, microbes are involved in weathering of rocks, in mobilization of metals from minerals, and in metal precipitation and deposition. These microbiological principles and processes can be adapted to treat particulate solid wastes. Especially the microbiological solubilization of metals from solid minerals (termed bioleaching) to obtain metal values is a well-known technique in the mining industry. We focus here on non-mining minerai wastes to demonstrate the applicability of mining-based technologies for the treatment of metal-containing solid wastes. In the case study presented, microbial metal mobilization from particulate fly ash (originating from municipal solid waste incineration) by Acidithiobacilli resulted in cadmium, copper, and zinc mobilization of 〉80%, whereas lead, chromium, and nickel were mobilized by 2, 11 and 32%, respectively. In addition, the potential of HCN-forming bacteria (Chromobacterium violaceum, Pseudornonas fluorescens) was investigated to mobilize metals when grown in the presence of solid materials (e.g.,copper-containing ores, electronic scrap, spent automobile catalytic converters). C. violaceum was found capable of mobilizina nickel as tetracyanonickelate from fine-grained nickel powder. Gold was microbially solubJlized as dicyanoaurate from electronic waste. Additionally, cyanide-complexed copper was detected during biological treatment of shredded printed circuit-board scraps. Water-soluble copper and platinum cyanide were also detected during the treatment of spent automobile catalytic converters.展开更多
Incomprehension concerning heavy metal containing finished solid leather wastes leads to environmental pollution.Conversion of these solid leather waste into energy and resource efficient products proves to be challen...Incomprehension concerning heavy metal containing finished solid leather wastes leads to environmental pollution.Conversion of these solid leather waste into energy and resource efficient products proves to be challenging.However,leather microfibres(LMF)were isolated from these heavy metal containing finished solid leather wastes.These heavy metal contain LMF further processed into metal reduction LMF.The metal reduction LMF were investigated for their heavy metal removal efficiency and toxicity analysis.The Cr(III)and Cr(VI)content of LMF was<1000μg/mL and<800μg/mL,respectively.Toxicity estimation was proved that the LMF had less than 1%.The study attempt to prepare reconstituted fibric materials(RFM)from metal reduction LMF and cellulose nanofibres(CNF).RFM were characterized for their physicochemical and mechanical properties.Hence,the study has proved a novel concept of RFM production which is recyclable,environmental friendly and cost effective.展开更多
Currently, increasing amounts of end-of-life (EoL) electronic products are being generated due to their reduced life spans and the unavailability of suitable recycling technologies. In particular, waste printed circ...Currently, increasing amounts of end-of-life (EoL) electronic products are being generated due to their reduced life spans and the unavailability of suitable recycling technologies. In particular, waste printed circuit boards (PCBs) have become of global concern with regard to environmental issues because of their high metal and toxic material contents, which are pollutants. There are many environmental threats owed to the disposal of electronic waste; off-gasses, such as dioxins, furans, polybrominated organic pollutants, and polycyclic aromatic hydrocarbons, can be generated during thermal treatments. which can cause serious health problems if effective off=gas cleaning systems are not developed and improved. Moreover, heavy metals will dissolve, and release into the ground water from the landfill sites. Such waste PCBs contain precious metals which are of monetary value. Therefore, it is beneficial to recover the metal content and protect the environment from pollution. Hydrometallurgy is a successful technique used worldwide for the recovery of precious metals (especially gold and silver) from ores, concentrates, and waste materials. It is generally preferred over other methods because it can offer high recovery rates at a relatively low cost. This article reviews the recent trends and developments with regard to the recycling of precious metals from waste PCBs through hydrometallurgical techniques, such as leaching and recovery.展开更多
The transient time-resolved reflectivity of chromium film is studied by femtosecond pump-probe technique with a 70-fs laser. Experimental results show that the reflectivity change increases with the power of the pump ...The transient time-resolved reflectivity of chromium film is studied by femtosecond pump-probe technique with a 70-fs laser. Experimental results show that the reflectivity change increases with the power of the pump laser. The fast decrease of the reflectivity occurs between 0-200 fs which is mainly due to the electron-electron interaction. Subsequencely, the slower recovery of the reflectivity between 200-900 fs is mainly due to the electron-phonon coupling process. The reflectivity after 900 fs rises little to a near-constant value for the thermal equilibrium of the system. The experimental results can be explained properly with numerical simulation of the two-temperature model. It is helpful for understanding of the electron ultrafast dynamics in chromium film.展开更多
基金supported by the National Basic Research Program(973)of China(No.2011CB201500)the National Natural Science Foundation of China(No.21277096)+1 种基金the Collaborative Innovation Center for Regional Environmental QualityShanghai Huanbao Waste Residue Treatment Co.Ltd
文摘Bottom ash is the major by-product of municipal solid waste incineration(MSWI), and is often reused as an engineering material, such as road-base aggregate. However, some metals(especially aluminum) in bottom ash can react with water and generate gas that could cause expansion and failure of products containing the ash; these metals must be removed before the ash is utilized. The size distribution and the chemical speciation of metals in the bottom ash from two Chinese MSWI plants were examined in this study, and the recovery potential of metals from the ash was evaluated. The metal concentrations in these bottom ashes were lower than that generated in other developed countries. Specifically, the contents of Al,Fe, Cu and Zn were 18.9–29.2, 25.5–32.3, 0.7–1.0 and 1.6–2.5 g/kg, respectively. Moreover,44.9–57.0 wt.% of Al and 55.6–75.4 wt.% of Fe were distributed in bottom ash particles smaller than 5 mm. Similarly, 46.6–79.7 wt.% of Cu and 42.9–74.2 wt.% of Zn were concentrated in particles smaller than 3 mm. The Fe in the bottom ash mainly existed as hematite, and its chemical speciation was considered to limit the recovery efficiency of magnetic separation.
文摘The slag samples taken from landfill, which originated from different metallurgical processes, have been characterized in this study. The slags were categor- ized as electric arc furnace (EAF) slag, argon oxygen decarburization/metal refining process slag and vacuum oxygen decarburization slag based on chromium content and basicity. EAF slags have higher potential in metal recovery than the other two slags due to its higher iron and chromium contents. The size of the iron-chromium-nickel alloy particles varies from a few ~tm up to several cm. The recoveries of large metal particles and metal-spinel aggregates have potential to make the metal recovery from landfilled slags economically viable.
文摘IBC Advanced Technologies' Molecular Recognition Technology(MRT) products,trade named SuperLig,selectively and rapidly bind with target metal ions to remove them from solution.The MRT process can produce a high purity separation product of maximum added value at low cost.In this paper,applications of MRT in the precious metals industry,including selective commercial separations involving Au,Pd,Pt,Rh,and Ru,are described and discussed.Application of MRT to the analytical determination of precious metals is presented.Potential use of MRT in recovering precious metals from end-of-life(EOL) products is discussed.
基金financially supported by the National Basic Research Program of China(Nos.2013CB632601 and 2013CB632604)the National Science Foundation for Distinguished Young Scholars of China(Nos.51125018 and 51504230)+2 种基金the Key Research Program of Chinese Academy of Sciences(No.KGZD-EW-201-2)the National Natural Science Foundation of China(Nos.51374191 and 2110616751104139)China Postdoctoral Science Foundation(Nos.2012M510552 and 2013T60175)
文摘A sodium modification–direct reduction coupled process was proposed for the simultaneous extraction of V and Fe from vanadium- bearing titanomagnetite. The sodium oxidation of vanadium oxides to water-soluble sodium vanadate and the transformation of iron oxides to metallic iron were accomplished in a single-step high-temperature process. The increase in roasting temperature favors the reduction of iron oxides but disfavors the oxidation of vanadium oxides. The recoveries of vanadium, iron, and titanium reached 84.52%, 89.37%, and 95.59%, respectively. Moreover, the acid decomposition efficiency of titanium slag reached 96.45%. Compared with traditional processes, the novel process provides several advantages, including a shorter flow, a lower energy consumption, and a higher utilization efficiency of vanadium-bearing titanomagnetite resources. ? 2017, University of Science and Technology Beijing and Springer-Verlag Berlin Heidelberg.
文摘The technology for beneficiation of banded iron ores containing low iron value is a challenging task due to increasing demand of quality iron ore in India. A flotation process has been developed to treat one such ore, namely banded hematite quartzite (BHQ) containing 41.8wt% Fe and 41.5wt% SiO2,by using oleic acid, methyl isobutyl carbinol (MIBC), and sodium silicate as the collector, frother, and dispersant, respectively. The relative effects of these variables have been evaluated in half-normal plots and Pareto charts using central composite rotatable design. A quadratic response model has been developed for both Fe grade and recovery and optimized within the experimental range. The optimum reagent dosages are found to be as follows: collector concentration of 243.58 g/t, dispersant concentration of 195.67 g/t, pH 8.69, and conditioning time of 4.8 min to achieve the maximum Fe grade of 64.25% with 67.33% recovery. The predictions of the model with regard to iron grade and recovery are in good agreement with the experimental results.
基金supported by the University Basic Research Fund of China(No.2232020A-10)the Joint Foundation of Iron and Steel,National Natural Science Foundation of China(No.U1660107)。
文摘The coupling of washing with adsorption process can be adopted for the treatment of soils contaminated with heavy metals pollution.However,the complex environment of soil and the competitive behavior of leaching chemicals considerably restrain adsorption capacity of adsorbent material during washing process,which demands a higher resistance of the adsorbents to interference.In this study,we synthesized strongly magnetic,high specific surface area(573.49 m^(2)/g)UiO66 composites(i.e.,UiO66-Fe_(3)O_(4))using hydrothermal process.The UiO66-Fe_(3)O_(4) was applied as an adsorbent during the ethylene diamine tetraacetic acid(EDTA)-assisted washing process of contaminated soil.The incorporation of UiO66-Fe_(3)O_(4)results in rapid heavy metal removal and recovery from the soil under low concentrations of washing agent(0.001 mol/L)with reduced residual heavy metal mobility of soil after remediation.Furthermore,UiO66-Fe_(3)O_(4)can quickly recollect by an external magnet,which offers a simple and inexpensive recovery method for heavy metals from contaminated soil.Overall,UiO66-Fe_(3)O_(4)configuration with EDTA-assisted washing process showed opportunities for heavy metals contaminated sites.
文摘Lead, zinc, and iron were recovered from jarosite residues using direct reduction followed by magnetic separation. The influence of the coal dosage, reduction temperature, and reduction time on the volatilization rates of lead and zinc and the metallization rate of iron were investigated. The results show that the volatilization rates of lead and zinc were 96.97% and 99.89%, respectively, and the iron metallization rate was 91.97% under the optimal reduction roasting conditions of a coal dosage of 25.0 wt% and reduction roasting at 1250°C for 60 min. The magnetic concentrate with an iron content of 90.59 wt% and an iron recovery rate of 50.87% was obtained under the optimum conditions in which 96.56% of the reduction product particles were smaller than 37 μm and the magnetic field strength was 24 k A/m. Therefore, the results of this study demonstrate that recovering valuable metals such as lead, zinc, and iron from jarosite residues is feasible using the developed approach.
基金Project supported by the National Basic Research Program of China(Grant No.2011CBA00606)the National Natural Science Foundation of China(Grant Nos.61404097,61334002,61106106,and 61176130)the Fundamental Research Funds for the Central Universities,China(Grant No.JB140415)
文摘Negative bias temperature instability(NBTI) has become a serious reliability issue, and the interface traps and oxide charges play an important role in the degradation process. In this paper, we study the recovery of NBTI systemically under different conditions in the P-type metal–oxide–semiconductor field effect transistor(PMOSFET), explain the various recovery phenomena, and find the possible processes of the recovery.
基金supported by the National Key Research and Development Program of China (No. 2020YFA0211004)the National Natural Science Foundation of China (Nos. 22176128, 21876114)+4 种基金Sponsored by Program of Shanghai Government (Nos. 21XD1422800, 19DZ1205102, 19160712900)Chinese Education Ministry Key Laboratory and International Joint Laboratory on Resource Chemistry, and Shanghai Eastern Scholar Program“111 Innovation and Talent Recruitment Base on Photochemical and Energy Materials” (No. D18020)Shanghai Engineering Research Center of Green Energy Chemical Engineering (No. 18DZ2254200)Shanghai Frontiers Science Center of Biomimetic Catalysis。
文摘Photocatalytic recovery,a novel precious metal recycling technology,dedicates to solving the environmental and energy consumption problems caused by traditional technologies.The activation of molecular oxygen (O_(2)) is one of the most critical steps in the whole process.Herein,we regulated the different adsorption intensity of oxygen on the surface by designing phosphate (PO_(4)^(3-)) modified titanium oxide(TiO_(2)).The results show that the adsorption of oxygen on the photocatalyst surface is gradually enhanced,which effectively improves the dissolution rate of precious metals.PO_(4)^(3-)modification increased the photocatalytic dissolution rate of gold (Au) by 2.8 times.The photocatalytic activity of other precious metals dissolution (such as palladium (Pd),platinum (Pt),rhodium (Rh),ruthenium (Ru) and iridium (Ir)) was also significantly improved.It is applied to the recovery of precious metals from spent catalysts and electronic devices to significantly promote the recovery efficiency.This indicates the direction for designing more efficient photocatalysts for precious metal recovery.
基金the Miyaneh Branch, Islamic Azad University, Iran for the fnancial support given for this study
文摘Cold purification filter cakes generated in the hydrometallurgical processing of Angouran mine zinc concentrate commonly contain significant amounts of Zn, Cd, and Ni ions and thus are valuable resources for metal recovery. In this research, a nickel containing solution that was obtained from sulfuric acid leaching of the filter cake following cadmium and zinc removal was subjected to solvent extraction experiments using 10vol%LIX984N diluted in kerosene. Under optimum experimental conditions (pH 5.3, volume ratio of organic/aqueous (O:A) = 2:1, and contact time -5 min), more than 97.1% of nickel was extracted. Nickel was stripped from the loaded organic by contacting with a 200 g/L sulfuric acid solution, from which 77.7% of nickel was recovered in a single contact at the optimum conditions (pH 1-1.5, O:A =5:1, and contact time =15 min).
文摘The improvement of microbial characterization has increased the comprehension of microbial population and their ability in the microbiological metal dissolution. Bioleaching processes have been expanded to use microorganisms for the recovery of metals from ores and wastes. This study introduces Palca mine tailings pond in Peru which turned into acid mine drainage (AMD). AMD is a source of microbial communities whose microorganisms may support the aqueous extractive metallurgy for metal recovery. Four samples of AMD were collected from different locations and the elemental characterization showed concentrations of metals, such as Cu, Zn, Al, Mn, and Fe. The pH of the samples showed variation between 1.9 - 6.8. Twenty-one microorganisms were isolated and selected according the cell morphology. 16s rRNA gene sequences identified five species of which three belong to the bacterial kingdom and two to the Fungi kingdom. Two of the bacterial species were ferrous ion oxidizing bacteria, identified as Acidithiobacillus ferriphilus and Acidithiobacillus ferridurans;and the other one a ferric ion reducing bacteria identified as Acidiphilium acidophilum. The fungi species identified were Rhodotorula sinensis and Exophiala xenobiotica, a filamentous fungus isolated for the first time from an AMD.
文摘The experiments of metal Cd extraction were carried out three times at oil phase/aqueous phase (O/A) = 1 and pH 2.2 by using 1.3 mol/L di(2-ethylhexyl)phosphoric acid (DEHPA) as the agent, with an extraction rate of 99.5%. Experiments on metal Co extraction were done three times at O/A = 0.5 and pH 4.7 by using 0.4 mol/L Cyanex 272 as the agent, with an extraction rate of 99.2%. By using equilibrium data and massive calculations to analyze and predict the interaction among the extraction systems, this paper came out with the polynomials of the empirical model as well as their parameter values for the equilibrium concentration of the above two extraction looos.
基金financially supported by the National Natural Science Foundation of China(Nos.52000097,51878325,51868050 and 51938007)the Natural Science Foundation of Jiangxi Province(Nos.20192BAB213011 and 20192ACBL21046)+1 种基金the Ph.D.research startup foundation of Nanchang Hangkong University(No.EA201802367)the Open Project Program of the State Key Laboratory of Photocatalysis on Energy and Environment(No.SKLPEE-KF202106),Fuzhou University。
文摘Wastewater management and energy/resource recycling have been extensively investigated via photo(electro)catalysis.Although both operation processes are driven effectively by the same interfacial charge,each system is practiced separately since they require very different reaction conditions.In this review,we showcase the recent advancements in photo(electro)catalytic process that enables the wastewater treatment and simultaneous energy/resource recovery(WT-ERR).Various literatures based on photo(electro)catalysis for wastewater treatment coupled with CO_(2)conversion,H_(2)production and heavy metal recovery are summarized.Besides,the fundamentals of photo(electro)catalysis and the influencing factors in such synergistic process are also presented.The essential feature of the catalysis lies in effectively utilizing hole oxidation for pollutant degradation and electron reduction for energy/resource recovery.Although in its infancy,the reviewed technology provides new avenue for developing next-generation wastewater treatment process.Moreover,we expect that this review can stimulate intensive researches to rationally design photo(electro)catalytic systems for environmental remediation accompanied with energy and resource recovery.
文摘For recovery of metals from low-concentration sources, biosorption is one of promising technologies and poly-γ-glutamic acid(γ-PGA) has been known as a potential biosorbent for recovery of heavy metals from aqueous solutions. Effects of solution pH on recovery of rare-earth metal Nd are systematically examined to clarify mechanisms of Nd recovery by y-PGA and its sodium salt(y-PGANa). The recovery efficiency of Nd by y-PGA increases from 2.4 to 19.6% as pH increases from 2 to 4. Subsequently the Nd recovery efficiencies for y-PGA and y-PGANa remain almost constant in the range of pH from 4 to 7. For pH 〉 7 the increase in Nd recovery is significant and 100% recovery of Nd is achieved at pH 9. The pH dependency on Nd recovery by y-PGANa is similar to that by y-PGA. Contributions of adsorption and precipitation/coagulation to Nd recovery process are quantified. Whereas the adsorption dominates Nd recovery at lower pH(〈~4), the precipitation/coagulation controls Nd recovery process for pH 〉 7. At higher pH, purple gel precipitates are observed. The maximum adsorption capacities for γ-PGA and yPGANa are 215 mg-Nd/(g-γ-PGA) at pH 4 and 305 mg-Nd/(g-y-PGANa) at pH 3, respectively. From the spectra of FT-IR and XPS, the biosorption of Nd onto y-PGA and y-PGANa via electrostatic interaction with carboxylate anions at pH 3 is verified. The Nd complexation with amide and carboxylate anion groups on γ-PGA and γ-PGANa may also contribute to the Nd recovery. The biosorption isotherms for Nd recovery by γ-PGA and γ-PGANa can be satisfactorily fitted by the Langmuir model. The thermodynamic studies suggest that the biosorptions of Nd by γ-PGA and γ-PGANa are endothermic. The utilization of γ-PGA and γ-PGANa as potential and eco-friendly biosorbents for the highly effective recovery of Nd from aqueous solution is confirmed.
文摘The recovery of metals from a multi-component alloy obtained by crushing, melting and anodic dissolution of waste from electric and electronic equipment(WEEE) was investigated. The anodic dissolution of the alloy was carried out in an electrolysis cell with one copper cathode and a central cast anode, immersed in the electrolyte formed by choline chloride-ethylene glycol-iodine. The temperature of the electrolyte during the process was 343 K. Depending on the electrolysis parameters(current density and cell voltage), cathodic deposits of Sn, Pb and Zn of 〉99% purity were obtained. Cyclic voltammetry was used in order to determine the deposition potentials of the studied metals. The obtained metallic deposits were subject of determination of XRD, SEM/EDX and AFM in order to evidence the deposits structure and morphology. The experiments performed demonstrated the possibility of separating/selective recovery of metals from the multi-component alloy resulted from the waste from electrical and electronic equipment by anodic dissolution in ionic liquids.
基金supported by Major Science and Technology Program for Water Pollution Control and Treatment in China(No.2017ZX07202-001-007)the National Science Fund for Distinguished Young Scholars(No.51625801)+4 种基金the Guangdong Innovation Team Project for Colleges and Universities(No.2016KCXTD023)Guangdong Provincial Science and Technology Project(No.2017A020216014)the National Science Fund,China(No.21777106)Pearl River S&T Noval Program of Guangzhou,China(No.201710010065)the key projects of Dongguan social science and technology development plan(No.2019507140204)。
文摘The simultaneous electro-oxidation of Ni(Ⅱ)-citrate and electrodeposition recovery of nickel metal were attempted in a combined electro-oxidation-electrodeposition reactor with a boron-doped diamond(BDD)anode and a polished titanium cathode.Effects of initial nickel citrate concentration,current density,initial p H,electrode spacing,electrolyte type,and initial electrolyte dosage on electrochemical performance were examined.The efficiencies of Ni(Ⅱ)-citrate removal and nickel metal recovery were determined to be 100%and over 72%,respectively,under the optimized conditions(10 m A/cm^(2),pH 4.09,80 mmol/L Na_(2)SO_(4),initial Ni(Ⅱ)-citrate concentration of 75 mg/L,electrode spacing of 1 cm,and 180 min of electrolysis).Energy consumption increased with increased current density,and the energy consumption was 0.032 kWh/L at a current density of 10 m A/cm^(2)(pH 6.58).The deposits at the cathode were characterized by scanning electron microscopy(SEM),energy-dispersive spectrometry(EDS),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS).These characterization results indicated that the purity of metallic nickel in cathodic deposition was over 95%.The electrochemical system exhibited a prospective approach to oxidize metal complexes and recover metallic nickel.
文摘In nature, microbes are involved in weathering of rocks, in mobilization of metals from minerals, and in metal precipitation and deposition. These microbiological principles and processes can be adapted to treat particulate solid wastes. Especially the microbiological solubilization of metals from solid minerals (termed bioleaching) to obtain metal values is a well-known technique in the mining industry. We focus here on non-mining minerai wastes to demonstrate the applicability of mining-based technologies for the treatment of metal-containing solid wastes. In the case study presented, microbial metal mobilization from particulate fly ash (originating from municipal solid waste incineration) by Acidithiobacilli resulted in cadmium, copper, and zinc mobilization of 〉80%, whereas lead, chromium, and nickel were mobilized by 2, 11 and 32%, respectively. In addition, the potential of HCN-forming bacteria (Chromobacterium violaceum, Pseudornonas fluorescens) was investigated to mobilize metals when grown in the presence of solid materials (e.g.,copper-containing ores, electronic scrap, spent automobile catalytic converters). C. violaceum was found capable of mobilizina nickel as tetracyanonickelate from fine-grained nickel powder. Gold was microbially solubJlized as dicyanoaurate from electronic waste. Additionally, cyanide-complexed copper was detected during biological treatment of shredded printed circuit-board scraps. Water-soluble copper and platinum cyanide were also detected during the treatment of spent automobile catalytic converters.
基金Dr.Senthil Rethinam acknowledges the funding support granted by the 2232-International Fellowship for Outstanding Researcher Program of TUBITAK(Project No:118C350).
文摘Incomprehension concerning heavy metal containing finished solid leather wastes leads to environmental pollution.Conversion of these solid leather waste into energy and resource efficient products proves to be challenging.However,leather microfibres(LMF)were isolated from these heavy metal containing finished solid leather wastes.These heavy metal contain LMF further processed into metal reduction LMF.The metal reduction LMF were investigated for their heavy metal removal efficiency and toxicity analysis.The Cr(III)and Cr(VI)content of LMF was<1000μg/mL and<800μg/mL,respectively.Toxicity estimation was proved that the LMF had less than 1%.The study attempt to prepare reconstituted fibric materials(RFM)from metal reduction LMF and cellulose nanofibres(CNF).RFM were characterized for their physicochemical and mechanical properties.Hence,the study has proved a novel concept of RFM production which is recyclable,environmental friendly and cost effective.
基金This research was financially supported, in part, by the National Natural Science Foundation of China (No. 21407105), Shanghai Municipal Natural Science Foundation (No. 14ZR1416700), SPU Graduate project fund (A O1GY17F022 ), SPU Key Disciplines Subject (XXKZD1602 ) and Shanghai Cooperative Centre for WEEE Recycling (ZF1224).
文摘Currently, increasing amounts of end-of-life (EoL) electronic products are being generated due to their reduced life spans and the unavailability of suitable recycling technologies. In particular, waste printed circuit boards (PCBs) have become of global concern with regard to environmental issues because of their high metal and toxic material contents, which are pollutants. There are many environmental threats owed to the disposal of electronic waste; off-gasses, such as dioxins, furans, polybrominated organic pollutants, and polycyclic aromatic hydrocarbons, can be generated during thermal treatments. which can cause serious health problems if effective off=gas cleaning systems are not developed and improved. Moreover, heavy metals will dissolve, and release into the ground water from the landfill sites. Such waste PCBs contain precious metals which are of monetary value. Therefore, it is beneficial to recover the metal content and protect the environment from pollution. Hydrometallurgy is a successful technique used worldwide for the recovery of precious metals (especially gold and silver) from ores, concentrates, and waste materials. It is generally preferred over other methods because it can offer high recovery rates at a relatively low cost. This article reviews the recent trends and developments with regard to the recycling of precious metals from waste PCBs through hydrometallurgical techniques, such as leaching and recovery.
基金supported by the National Natural Science Foundation of China (No. 60878035)the Shanghai Science and Technology Committee (No.07SA14)the National "973" Program of China (No.2006CB806000)
文摘The transient time-resolved reflectivity of chromium film is studied by femtosecond pump-probe technique with a 70-fs laser. Experimental results show that the reflectivity change increases with the power of the pump laser. The fast decrease of the reflectivity occurs between 0-200 fs which is mainly due to the electron-electron interaction. Subsequencely, the slower recovery of the reflectivity between 200-900 fs is mainly due to the electron-phonon coupling process. The reflectivity after 900 fs rises little to a near-constant value for the thermal equilibrium of the system. The experimental results can be explained properly with numerical simulation of the two-temperature model. It is helpful for understanding of the electron ultrafast dynamics in chromium film.